Need instructions on how to get Quanser working with LabView 7.1

I need information on what LabView modules or addins to install in order to run Quanser (QNET Experiments release 2.2).  LabView 7.1 is loaded but we also have LabView 7.0 if needed.

Hello JND,
The Quanser website indicates that the QNET products are fully
compatible with LabVIEW and NI Elvis. However, I could not find more
information on any drivers they provide for LabVIEW, so I suggest you
contact them directly about this. If they have drivers written for
LabVIEW, that should be enough to communicate with the board from
LabVIEW. In order to communicate to NI Elvis, you need to install
NI-DAQmx and NI ELVIS drivers available at this page.
Good luck and best regards,
Shakhina P.
Applications Engineer
National Instruments

Similar Messages

  • How to get QTP11 work with FF17. Unable to get Quicktest Proffessional11 plugin

    How to get QTP11 work with FF17. I have already installed Patch_090 and 0122.
    Unable to get Quicktest Proffessional11 plugin even after creating temp directory, into FF “extensions” directory.
    Please help

    If I may ask is there a recommended version of Firefox for the extension? [http://www.qatutorial.com/files/QTP_Install_Guide.pdf] is all I could find on how to install the software, is this the right add on?

  • I want to make a DVD of pictures in iPhoto to use on a Windows computer and need instructions on how to get the pictures in a place to do that.

    I'm looking for instructions on how to make a DVD of photos in iPhoto to use on a Windows based computer.  Thank you.

    This guide should help you there:
    support.apple.com/kb/HT1257

  • How  to get lightroom work with CameraRaw 5.2?

    Hello im using Lightroom 2 and CS4 on a imac 24".
    How is it possible to get Lightroom to work with CameraRaw 5.2?
    A simple installation don´t work.
    Any help is welcome!
    Greetings,
    Volker

    Volker- You should update to v. 2.1 asap, and 2.2 when released in the next couple of weeks.
    LR doesn't depend on ACR, but has a parallel, more or less, conversion engine built in.

  • How to get ddclient working with dyndns?

    Hello
    I have installed ddclient and have the following file in '/etc/conf.d/ddclient'. I know that this file is read by the ddclient service since it gives an error if the syntax is not correct here.
    ## ddclient configuration file
    daemon=600 # check every 600 seconds
    custom=yes
    #mail-failure=[email protected] # Mail failed updates to user
    pid=/var/run/ddclient.pid # record PID in file.
    ## Detect IP with our CheckIP server
    use=web, web=checkip.dyndns.org, #web-skip='Current IP Address: '
    ## Default options
    protocol=dyndns2
    server=members.dyndns.org
    wildcard=yes
    static=no
    ## Dynamic DNS hosts
    host=mywebsite
    host=myotherwebsitename
    I have ddclient listed in rc.conf, but it doesn't update the ip addresses, even when I restart the ddclient service manually.
    When I do
    ddclient -file /etc/conf.d/ddclient -verbose -debug
    manually as root, the IP addresses get updated without any problems.
    I would like to know if I am missing something in the config file that would explain why the ddclient service is not able to do the updating by itself.
    Thank you.
    Last edited by ravster (2009-04-04 14:23:58)

    When I remove the '#' in front of the webskip, I get the following when restarting the service.
    ]# /etc/rc.d/ddclient restart
    /etc/conf.d/ddclient: line 8: web-skip=Current IP Address: : command not found
    /etc/conf.d/ddclient: line 8: web-skip=Current IP Address: : command not found
    :: Stopping ddclient [DONE]
    /etc/conf.d/ddclient: line 8: web-skip=Current IP Address: : command not found
    :: Starting ddclient [DONE]
    This is the same even if I change from ' to " outside the "Current IP Address: " bit.
    Having different code in '/etc/ddclient.conf' has no effect on the error message, so I think the script does look at '/etc/conf.d/ddclient'.

  • I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

    I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

    http://support.apple.com/kb/HT1449

  • Can anyone help me change the DOB on my sons profile for his apple I'd so I can setup family sharing? I originally put both ids in my name. He is 19 do it keeps saying needs my permission but no instructions in how to get that done?

    Can anyone help me change the DOB on my sons profile for his apple I'd so I can setup family sharing? I originally put both ids in my name. He is 19 do it keeps saying needs my permission but no instructions in how to get that done? His phone was stollen once last month need to get this done ASAP to prevent future headaches. Ty

    You can not change the date of birth on the account. Apple makes that clear up front when the account is created.
    The only way to "fix" this is going to be for him to create a new account with the correct information. Any apps purchased with the old one will need to be re-purchased with the new account. They can not be transferred.

  • How to get SAPRFC working on XAMPP 1.6.2? Try this.

    Hi
    I have just managed to get SAPRFC working with XAMPP 1.6.2 (released on  29/05/2007). I noticed there was not much information on XAMPP in the PHP Development forum, so thought this might be useful for anyone who may wish to use it.
    I originally started with Craig Cmehil's post <a href="/people/sap.user72/blog/2005/05/15/getting-started-with-php started with PHP</a>. I already had XAMPP installed, so just needed to update it and add SAPRFC support.
    I am using the following:
    Windows XP SP2
    XAMPP 1.6.2 - <a href="http://www.apachefriends.org/en/xampp-windows.html">http://www.apachefriends.org/en/xampp-windows.html</a>
    This includes:
    1. Apache 2.2.4
    2. MySQL 5.0.41
    3. PHP 5.2.2 + 4.4.7 + PEAR + Switch
    4. And other modules included. See XAMPP website for more information on the extra modules included.
    SAPRFC  1.4-5.20 - Re: PHP 5.2 and saprfc 1.4.1. This provided me with a link to SAPRFC 1.4-5.2.0. Using the php_saprfc.dll file included in this ZIP file solved the problem.
    <u>Instructions</u>
    1. Install XAMPP and follow setup taking defaults (I installed to C:\DEV\XAMPP)
    2. Extract SAPRFC to a suitable location (e.g. C:\DEV\SAPRFC)
    3. Copy the php_saprfc.dll file to the XAMPP\PHP\EXT folder (as defined in the extensions_dir in PHP.INI).
    4. Copy the remainder of the SAPRFC ZIP file to the XAMPP\HTDOCS folder. Create subdirectory if required.
    4. Edit PHP.INI and add the line <i>extensions=php_saprfc.dll</i> You will need to add this after the last <i>extensions=<some_extension>.dll</i> line.
    5. Shutdown and restart Apache using the XAMPP Control.
    6. Launch Internet Explorer and go to page <i>http://localhost/saprfc_test.php</i> or if you have put the SAPRFC PHP files in a subdirectory go to <i>http://localhost/yoursubdirectory/saprfc_test.php</i>.
    7. By running the saprfc_test.php file you should see a logon page.
    It should now be working on the PHP 5.2.2. I have not tested with the 4.4.7 version.
    That's all you need to do, so you should now be able to test some of the examples that are in the Blogs.
    Best of luck
    Nick

    Hello everybody,
    I've found simple solution for all problems with "Generate Activation Context failed for  ... php_saprfc.dll". This has something to do with missing libraries at your system.
    The next trace in Event viewer -> System was:
    "Dependent Assembly Microsoft.VC80.CRT could not be found and Last Error was The referenced assembly is not installed on your system.
    The solution is install: Microsoft Visual C++ 2005 Redistributable Package (x86)
    "vcredist_x86.exe" available at Microsoft downloads page.
    Good luck
    Michal.

  • I installed Photoshop Elements 12 and its icon is on desktop, but when I launch it, I get error messages.  How to get it working?

    I installed Photoshop Elements 12 and its icon is on desktop, but when I launch it, I get error messages.
    How to get it working?

    My guess is that you won't be able to do much if you threw away the serial number before using it.  The serial number will not have been externally visible on the box though... doing that would make it available for use by anyone who sees the box in any store.
    To locate the serial number:
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    If you remain unable to locate the serial number you might need to head back to wherever you purchased the product to confirm whether or not you might have thrown out the serial number or if it could even possibly have never been provided.
    Beyond that you need to resolve serial number issues with ASdobe Support directly.  Here is a link for chat:
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • How to get mpeg streamclip with mpeg 2 to work on Leopard and for fcp x?

    How to get mpeg streamclip with mpeg 2 to work on macbook with Leopard and VOB files?  Goal is to import into FCP X.
    mpeg used to download effectively and for free with fcp 7 but apparently not the case with fcp x.

    You need the MPEG-2 playback component. This is described in detail on the Squared5 web site.

  • Hi My Iphone 4 keeps on turning off with no reason and there is no way of turning it on. any advice of how to get it working?

    Hi My Iphone 4 keeps on turning off with no reason and there is no way of turning it on. any advice of how to get it working?

    I guess but that was what I was on earlier but it wasn't of much help.
    I need to chat with an apple person but don't know how if I don't have a phone accessible.
    Is there a way to connect thru a laptop or something?

  • How to get a work roster into ical

    Hi there
    Does anyone know how to get a work roster into ical so I can then sync it with my iphone and view my roster on my phone?
    Any help would be greatly appreciated.
    All the best
    Enigma

    Depends on the format of the "work roster" - if it's a calendar file, you can import it with File menu > Import. If it's some other file type, you may not be able to import it and need to enter the events manually instead.
    You might try the iCal forum.

  • Need info on how to get the little pictures like Adobe website has next to the title of the page??

    I know how to enter title text but i need to know how to get an image next to the title of the page please help??

    http://alt-web.com/favicons.shtml
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

    Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

    After you change the account settings as I described below hold your finger on any app until they all wriggle, then tap the "-" on each purchased with her Apple ID. Press the HOME button when done. Then go to the App Store and buy or download the apps you want.

  • Hi, just need to know how to get my music, video, pictures and apps form my iPhone to my new laptop as the old computer, which I used before was stolen. I only have my phone left and if I try to conect it to my new laptop it's trying to delete everything.

    Hi, just need to know how to get my music, video, pictures and apps form my iPhone to my new laptop as the old computer, which I used before was stolen. I only have my phone left and if I try to conect it to my new laptop it's trying to delete everything.

    I have also noticed all my settings won't stay set, example....I removed the check mark from "third party cookies", the when I close Firefox and reopen the check mark is back, also my tool bar has screwed up....can't reset, been having trouble the up grade.

Maybe you are looking for