Need instructions on restoring files from iPod to Hard Drive

My ExHD went kaputz again so I need to restore all of my tunes and playlists from my iPod to the HD. I've seen instructions on here on how to do that but can't find them anywhere. Can someone give me the link to do this?

There is a manual method of accessing the iPod's hard drive and copying songs but not playlists back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward.
iGadget Windows Only
iPodCopy Mac and Windows Versions
iPod Access Mac and Windows Versions
YamiPod Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
PodPlayer Windows Only

Similar Messages

How to restore files from an erased hard drive?

hi
I recently got infected with a trojan, and after updating my mac was told ive also picked up malware software.
I moved everything i needed to my hard drive and wiped and reloaded my mac. i then checked my time machine backups on my hard drive and found the malware files on the time machine backups too. so i took what i needed off my hard drive and wiped that, but without realising have deleted my uni work folder containing my essays.....
Is there anyway to recover the files? ive tried using a couple of programmes online but there only trials, so when i find the file i cant restore it.

Are there any free data recovery softwares availible? ive tried about 4 that say theyre free and that can find the files im looking for but i cant recover it without paying?
If not whats the cheapest that you can reccomend?
Also i dont think the file is availible on my Mac book anymore but i can find it on the hard drive i had it stored on. is the last section the one to use for recovering from hard drives?

Move MP3 files from ipod to hard drive

Hey,
My hard drive dies and I have lost everything on it. Good news is that a lot of my music is stored on my ipod. How do I get the music files, which were mostly NOT purchased from itunes but my own MP3s, off of my ipod on on to my new hard drive?
Thanks!
Gregg

Welcome to Apple Discussions!
Here are a few options...
YamiPod
MacMuse: Computer Crashed
You can also search the discussions or the Internet via Google for more options.
btabz

I need to move a file from an external hard drive to my mac how do i do this?

I have to copy a file from my Seagate External Hard Drive to my macbook Air and cannot figure out how to do it

Choose Computer from the Finder's Go menu, double-click the external drive, and drag the file to the desired location.
(124884)

I need help with viewing files from the external hard drive on Mac

I own a 2010 mac pro 13' and using OS X 10.9.2(current version). The issue that I am in need of help is with my external hard drive.
I am a photographer so It's safe and convinent to store pictures in my external hard drive.
I have 1TB external hard drive and I've been using for about a year and never dropped it or didn't do any thing to harm the hardware.
Today as always I connected the ext-hard drive to my mac and click on the icon.
All of my pictures and files are gone accept one folder that has program.
So I pulled up the external hard drive's info it says the date is still there, but somehow i can not view them in the finder.
I really need help how to fix this issue!

you have a notebook, there is a different forum.
redundancy for files AND backups, and even cloud services
so a reboot with shift key and verify? Recovery mode
but two or more drives.
a backup, a new data drive, a drive for recovery using Data Rescue III
A drive can fail and usually not if, only when
and is it bus powered or not

Restore Files from Seagate external hard drive?

I have a macbook (late 2009 version) and recently my hard drive failed. Before failing, I brought my mac in and a genius helped me do a time machine backup onto a 1t Seagate external hard drive (the external was reformatted for os beforehand). Now, I can't figure out how to restore my old information from the external onto my new, restored hard drive.

See Time Machine - Frequently Asked Question #14.

HT1386 My hard drive died and I need to resync my iPad. Will just following the initial instructions resync my iPad and restore all my information or do I need to try to recover the iPad file from the dead hard drive?

My hard drive died and I need to resync my Ipad. Will following the initial instructions for syncing work or do I need to restore my original files from the dead hard drive.

If the hard drive that crashed is the one that stored the itunes library, be sure to restore the library from Time Machine (mac) or whatever backup you use on windows. That will get back your music. I suspect that the replacement drive has an empty itunes library and thus, perhaps, the itunes match used that to sync to its servers.
Try posting in the iTunes Match forum, you'll probably find more knowledgeable folks there.
https://discussions.apple.com/community/itunes/itunes_match

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

My hard drive failed. I was able to restore my files from an external hard drive. I have my bookmarks saved but am not able to import them into Firefox as the only option is to import them from another browser. Any suggestions?

-My hard drive failed.
-I was able to restore my files from an external hard drive.
-My bookmarks are saved to a folder on my new hard drive.
-I am not able to import them from this folder on my hard drive into Firefox.
- the only option Firefox offers for importing bookmarks is to import them from another browser...is there another way?

In Firefox the bookmarks are saved in a database file called places.sqlite in the profile folder. If you have got this file from the external hard drive you can restore the bookmarks by copying this file to your current profile folder. For details of the location of the profile folder see either https://support.mozilla.com/kb/Profiles or http://kb.mozillazine.org/Profile_folder_-_Firefox

I have just restored data from an external hard drive, but half of my iTunes songs are getting the error "original file cannot be located." Where are these files?

My Windows 7 PC just had to be reformatted, and I have retrieved all of my files from an external hard drive. About half of my iTunes library is working fine, the other half pop up the error statement "original file cannot be located." If they haven't come off my external drive, where are they?

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Delete the file from the external hard drive

deleted adobe reader 10, delete the file from the external hard drive. how to restore

What is your operating system & version?
How did you "delete" Adobe Reader?
What "file" did you delete?
What do you want to restore?

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose.

How do I delete files from a portable hard drive

I've been backing up my MacBook Pro on an external portable hard drive. I need to delete some but not all the files from that portable hard drive permanently. When I highlight them and click to move them to Trash I get a message telling me this cannot be done because they are Read Only files? How do I go about it. I am required by work to delete them off this hard drive. Do I have to reformat the hard drive? If so how do I go about it?

You can easily delete files from a Time Machine Backup:
Click the Time Machine icon in the Dock.If the Time Machine icon isn’t in the Dock, look for Time Machine in the Applications folder.
Use the arrows or the timeline along the right side of your screen to browse through the backups Time Machine created.The windows behave just like Finder windows, so you can open folders, click items in the sidebar, and use the search field in the upper-right corner of the window.
When you find the item you want to delete, select it, and then open the Action menu (looks like a gear) and choose Delete All Backups for the item.

Importing .mxf Files from an external hard drive...

Any advice or tips would be greatly appreciated. My problem comes close to others discussed, but I haven't been able to find a duplicate post. And I apologize for the length; I just want to give you as much info. as possible (I also put details in my signature) to help you help me.
I shot a short film using Panasonic's HVX200 camera, filming in HD 720p/24p, and downloaded each P2 card through a PC laptop into a LaCie Brick external hard drive. I was originally planning on editing the footage with Adobe Premiere Pro 2.0, but became frustrated with how much trouble it was having handling the .mxf files. Assured by Apple salespeople that FCP 5 would have no problem importing the footage from an external hard drive, I purchased the computer described in my signature.
Now I know that FCP/Apple only supports importing footage from the P2 card directly, and not from an external hard drive. A representative from ProMax.com was able to help me out, however. First, he had me copy the footage files onto my Mac internal drive from the external hard drive. Then, he had me select IMPORT -> PANASONIC P2. Then, I was to highlight the CONTENTS folder and import away. And it worked... sort of.
There are two major problems: 1) During this transfer, not all of the footage is making it across. I import it, and then get the much-talked about "one or more P2 clips failed to import; probable incomplete or corrupt clips" warning. After checking the original video folder on the internal hard drive and comparing it to the number of clips FCP imported, I learned that I had lost around 20 clips/video files at one point. Other shooting day transfers worked completely smoothly with all of the files imported (we split up the footage by shooting day, without touching or changing the CONTENTS folders). So, some transfers work and some don't. And 2) When I try to import the files from our 4th day of shooting, I get a "Selected path does not contain a P2 volume." Nothing is imported.
So, that's my situation, and I'm getting very desperate. I know that I'm not doing things in the Apple-supported way, but I'm really hoping there's still someway to successfully get the files from the external hard drive into FCP completely. It seems to work some of the time.
Final notes: When importing, I make sure to import the entire CONTENTS folder. There is never a LASTCLIP.TXT file listed under it in the window, but some of the days of footage have transferred perfectly, so I'm hoping that's not a dealbreaker. If it is, isn't there some way to rebuild a lastclip.txt file? I don't even know if that's the issue. And one last note: In most of my folders, the "CLIP" folder has a number of files in it. In the 4th day's footage that I can't import at all, I noticed that the CLIP folder is empty. And on the days where FCP isn't importing all the files (like I mentioned above), there isn't a CLIP file for every single VIDEO file. Could this be the main problem? Along this line, is there a way to somehow put the footage on the external hard drive back through a p2 card and then into the Mac?
Okay, I'll stop typing. Thank you so, so much for any help.
Tom
PowerMac G5 (Dual 2.3 GHz) Mac OS X (10.4.6) Quicktime 7.1.1 - Final Cut Pro 5.1 - Aforementioned External Hard Drive: LaCie Brick (FAT 32 based)
PowerMac G5 Mac OS X (10.4.6)

The problem didn't turn out to be as complicated as I had thought. The process I described above ended up working fine, and I'll explain how. And this is a cool workaround, because the AppleCare helpers told me that they didn't think it would work (FCP P2 import is only supported straight from the P2 card/viewer or the camera).
I hooked up my external hard drive to the Power Mac G5, and copied the files and folders onto my internal scratch disk. Then, I opened FCP and chose IMPORT -> Panasonic P2. I chose the "CONTENTS" folder for each day's filming, and imported them in, no problems. There was no visible "lastclip.txt" file shown (under the "CONTENTS" folder or anywhere else), but this didn't seem to cause any problems.
The reason that not all of the footage was bring imported (the aforementioned "one or more P2 clips failed..." warning) was because we were missing clip files (in the CLIP folder) corresponding to certain video files (in the VIDEO folder). Luckily, we had just forgotten to transfer all of them from the original external hard drive, and once we transfered them completely, FCP could read all the video files. FCP needs a clip file for every video file in order to make it work (that's why our aforementioned "Day 4" could not be read; we hadn't copied all of the clip files over with the video files).
Even after we did this, we STILL were getting the "one or more P2 clips..." warning for our Day 5. After taking a look at all the folders, we figured out that there were still more files in the VIDEO folder than in the CLIP folder, even after we transferred them all over. Finally, we figured out what had happened. For some reason, some of the audio files for some of the clips had been included in the VIDEO folder for our Day 5. There is no way we did this accidentally; somehow, the HVX200 placed some of the audio files into both the VIDEO and AUDIO folders. And FCP was trying to read those as video files, and therefore couldn't find the corresponding clips in the CLIP folder. After making sure that those audio files were also in the AUDIO folder, we simply deleted them from the VIDEO folder and stopped getting the "failed to import" warning.
Final thing to share: If we had actually been unable to find the corresponding clip files in our original external hard drive, we had also found a potential solution (that we didn't end up needing to try). You can record from FCP back onto the P2 card, in the hopes that the clip files would be regenerated when you re-import it into FCP. I received a PDF file about this process, and I'm not sure how to put it up on the page here. If interested in this described process (which, again, I can't fully vouch for), feel free to email me at [email protected] and I can forward it to you.
Hope this helps.
PowerMac G5 Mac OS X (10.4.6)
PowerMac G5 Mac OS X (10.4.6)

When I try to import .olm files from my external hard drive back up, where do they go? It says on different forums they go to the "on my computer" folder but they are not there

When I try to import .olm files from my external hard drive back up, where do they go? It says on different forums they go to the "on my computer" folder but they are not there.
I go through all the instructions but then my emails do not appear. I'm starting to panic a bit!

You might want to try asking on the MS Office Outlook forum - http://answers.microsoft.com/en-us/mac/forum/macoutlook - since those are Outlook files.
Also note which method you're using to create a backup.
Clinton

Need instructions on restoring files from iPod to Hard Drive

Similar Messages

Maybe you are looking for