Need instructions to create application in SCCM 2012 for Captivate 8

I need instructions for creating an application in SCCM 2012 for the latest versino of Captivate. I found instructions for the prior version but unsure if these apply. The instructions state to create a package, not application. Is it possible to create the application, and are there any special instructions I should know about?
Thanks

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

I heard some promote use of "Terminal Services(RDS)", rather than App-V application with SCCM 2012 even if you have SCCM licens.

Hi,
I heard some promote use of "Terminal Services(RDS)", rather than App-V application with SCCM 2012 even if you have SCCM licens. The reason you dont need to repackage\test the application on an client OS...
I don't agree and I have not Heard this Before, just that you use TS for some scenario.
Or is it more likely that "Terminal Services(RDS)", take over the applikation administration?
/SaiTech

Surely this all depends on your environment. There's nothing wrong with creating RemoteApps to push to client devices. Maybe you have an environment where RDS is widely used.
Why not leverage both solutions and target App-V's at RDS servers and then create App-V based RemoteApps that users can run at home as part of a home working solution via RDWeb.
Creating apps via RDS will be an admin overhead yes but then so is creating App-V packages in SCCM.
I don't agree with the arguement re: 'you dont need to repackage\test the application on an client OS...' as
App-V allows you to run on multple O/S types.
To be honest both technologies have their pros and cons.
Cheers
Paul | sccmentor.wordpress.com

Error While exporting an application in SCCM 2012

Hello,
While exporting an application in SCCM 2012, getting this error !
"The Export application wizard completed with errors"
Error: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
Any help around it will be greatly appreciated !
Thank You.

The problem is in the error message
Error:
The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
Reduce the path to where you are storing the export. As Jörgen suggest hang the export off the root of
the drive eg: C:\Export.
What's the name of your application? Is this long as well?
Cheers
Paul | sccmentor.wordpress.com

I need instructions on creating a configuration profile to turn off the Deleting Apps button on an iPad using the iPhone Configuration Utility, please.

I need instructions on creating a configuration profile to turn off the Deleting Apps button on an iPad using the iPhone Configuration Utility, please.

The deleting apps restriction is new in iOS 6 but is available only on supervised devices. You can supervise devices and create and install a configuration profile containing this restriction using Apple Configurator.

Is CDN built in Azure Websites or CDN needs to be created and linked to website for content sharing

Is CDN built in Azure Websites or CDN needs to be created and linked to website for content sharing...

Hi
CDN is a separate service in Azure and you can serve your content there.
Then your azure website can use those CDNs that you provide in azure (just like any other CDN out there like Jquery Ajax etc ..)
Regards
Aram

Instructions to create custom home screen icons for websites and phone #'s

Here are instructions to create a home screen icon for a phone number or a website. This is very cool!
1. Go to http://webclip.us on your computer (not on your phone) and click on "create now".
2. In icon label, type what you want to call your icon.
3. In URL, type either the URL of the website you want to link to, or for a phone number link, type http://##########.tel.QLNK.net (where ########## is the 10 digit phone number you want).
4. In icon file, click the arrow to browse to the photo or image you want the icon to display.
5. Enter the security code shown, then click "upload now". You will get a "webclip number".
6. Now on your iPhone in Safari, go to http://webclip.us and enter the webclip number your computer just generated, and tap Go.
7. Use the plus sign to add the icon to your home screen, change the name to whatever you want, and you will have a cool little icon with the photo you uploaded!
If you used the phone number option, when you tap the icon on your home page, it will launch Safari and then pop up "Call" and "Cancel" buttons to call that phone number directly. If you used a website URL, it will launch that website just like a regular webclip.
So I now have an icon with my husband's face on it that dials his phone number. Very cool!!
-SB
Message was edited by: SisterBlue
Edit to make it clear that I don't take credit for creating this procedure - I simply found a reference to them in another post and posted the step-by-step here because it worked so well for me.

Do you know if this requires the 1.1.3 upgrade.. I got all the way through it until the end where it would not give me a plus sign or a way to add it.. wondering if it can be done with 1.1.2 thanks!

Can't create a silent install package for Captivate 7 with AAMEE

I'm trying to create a silent install package for Captivate 7. It doesn't appear that this works with AAMEE. Has anyone been able to do this? If it won't be possible with AAMEE, is there a way to do it with cmd line switches?

Hi,
You would need to use Adobe Creative Cloud Packager to create a deployment package and deploy Captivate 7 as AAMEE does not supports Captivate 7.
Please refer the documentation available at - http://helpx.adobe.com/creative-cloud/packager.html
Hope this helps.
Regards,
Sharad
P.S - Creative Cloud Packager would be deployed under your Adobe LWS account. In case you do not have it available in LWS, then please P.M me your email address and I will get that processed.
Regards,
Sharad

Error while Creating Prestage Content File for Application in SCCM 2012

Hi All,
I am using SCCM 2012 SP1 on Win 2K8 SP R2 box. Database is SQL 2008 R2 SP1 CU6. I have trying to create Prestaged content for Applications for extracting pkgx files on DP's. I am getting the below error message for random applications(not for all applications
but for random applications).
Content that will be included into the prestaged content file (1):
Citrix Receiver 13.3.0.55
Export all dependencies: 'Yes'
Selected distribution points: 'MPSERVER.GS.WORLD.PRESS.COM'
Prestaged content file: 'G:\pkgxfiles\Application\Citrix Receiver 13.3.0.55.pkgx'
　Error: Distribution is currently in progress for selected packages: HM0000D9. Please wait and try again
But if I see this application is successfully distributed to 2 of the distributions points long ago. If I reupdate the Distribution point and then again try to create prestaged content for this application then pkgx file for that application is getting
created.
Why this is happening and how can I resolve this?
Thanks & Regards Uttam

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

How to uninstall applications in SCCM 2012 R2

Hi,
We have installed following applications using "Applications" mode of SCCM 2012 R2.
XML Notepad
Notepad++
Adobe Reader XI
How do we uninstall these applications from clients using SCCM 2012 R2? Do we create deployment type for each and uninstall?

You can configure an install and uninstall command line for each deployment type. Then there are 'install' and 'uninstall' deployments. Uninstall deployments can be used to uninstall software. Keep in mind that an install deployments wins over an uninstall
deployment if both are deployed to the same machine.
Torsten Meringer | http://www.mssccmfaq.de

Deploying CC Enterprise Applications With SCCM 2012

Hi all,
We are using CC Packager to package up individual applications (Photoshop, InDesign etc) and are having trouble deploying the applications once packaged. To deploy, we are using SCCM 2012 and are deploying to Windows 7 x64 clients. It appears that the install begins on the client, then hangs, never to finish.
We are running the MSI with the REBOOT=ReallySuppress and MSIRESTARTMANAGERCONTROL=Disable commands, but with no luck.
This has us really stumped. The applications seem to package fine, yet just won't install. If we manually run the installer, we can see it begin installing, then the progress bar goes backwards and the installation ends without displaying any sort of message.
Also, as an FYI, we have followed this guide closely in our attempts: http://helpx.adobe.com/creative-cloud/packager/deploying-packages-sccm.html
Has anyone experienced a similar problem? Any ideas?
Thank you in advance.
Ryan

Windows 7 x64 Clients
Deploying with SCCM 2012
I have called Adobe before and was told that the application package needs to be on a local drive on the computer. The package cannot be installed if the package is sitting on the network. My installation for a adobe creative cloud package fails to install when I try to install the application from the software center. At some moment the installation searches to ensure it is on a local disk. Not sure how this happends. If you place the installation package on a drive on your computer the package will install, although it will take time depending on how many applications you have packaged.
Another problem that you might have is having users log out of the applications without admin previlages.
I have yet to find a solution for these two problems, I could really use some help from someone who has sucessfully deployed a creative cloud package to a user.
Thank you

Deploying Applications with SCCM 2012 R2 to Server 2008 R2 RDS servers

I'm having some trouble finding some concrete information from Microsoft regarding the deployment of applications to RDS servers using SCCM 2012 R2. There seems to be a lot of conjecture, old information and old wives tales floating around and I was hoping
I could get some information confirmed!
1. MSI installs automatically switch to install mode on RDS servers?
I've seen this mentioned a few times. I've also seen it mentioned that it is only true when running the MSI from the console session manually (i.e clicking the MSI file) not running as SYSTEM as SCCM would usually do. Can someone confirm if they do this
themselves or not?
2. Users still logged in when deploying applications?
Is it possible to deploy an application while users are still logged in? Is this only related to going into 'install' mode and taking the chance that a user will do something that will cause issues? Or is it known to cause issues?
I guess those are the main ones, I'm experienced in SCCM but not with deploying to RDS servers, I cant seem to find any straight answers!
Anyway, thanks in advance!

I've never had large enough RDS environment to use SCCM for app push, but from my experience in managing 2012/R2 RDS and local installs, I never bother with switching to install mode anymore and it works fine. Now if you're skeptical, you can
easily build this into a script that runs as a pre-req to your .MSI as part of the software package in SCCM so it's not a big deal.
As for installing apps while users are logged in, shouldn't be a problem if you're installing a new app., if however you're updating an existing application or uninstalling it, then it may be best to drain that RDS host first of all user sessions then do
the work just to be safe. this also helps avoid reboots.

What is the security context when deploying application using SCCM 2012?

As far as i know when using Group Policy the software is always installed under SYSTEM security context. However i cannot find any information related to SCCM 2012 (and deploying applications) security context.
Also is there a difference in doing "Install for User" or "Install for Device/System"?
Thanks

Thanks. Just to confirm that if you use Group Policy and you Publish the msi for user when the user install it from Add/Remove Programs it is still going to be executed in SYSTEM security context?
And while we are on this topic - is the above (about the security context in SCCM 2012) written anywhere in some official MS web page?
Not sure about the context for Intellimirror, but for ConfigMgr it's as Ronnie and Torsten stated. This may be documented somewhere, not sure. Not everything is documented though -- in fact, I'd say less than 25% (probably less than 10%) of everything
to be known about ConfigMgr is officially documented. Note that this is the same for any product -- there simply are far too many permutations and possibilities to document them all.
Jason | http://blog.configmgrftw.com

MDT 2013 UDI install Application list SCCM 2012 R2

Hello,
did anyone have an idea how i can add all my application from sccm to the mdt udi install application list ?
I don´t want to add every single application.

If you haven't found your answer yet, here is a great video that will show you how to do exactly what you are asking about, among other things.
https://www.youtube.com/watch?v=off-VGYZIEo

Can I set a priority in SCCM 2012 for advertisements or any other ideas to fix my Task sequences?

I have several task sequences that I deploy to lab computers that we re-image 1 or 2 times a year. The task sequences run and install specific software
for that lab after the base image deploys.
The base image is deployed using WDS without SCCM in the mix. It is a setup they we are using because of legacy business processes that just make this easier.
Then after the machine boots up and gets its SCCM policies the task sequences start running to deploy the software.
The issue I am noticing is that I have no control over what runs first and sometimes Windows Updates that are deployed via SCCM run before or in between the task
sequences that I have running. Some installs fail because of the pending Windows Update reboot, which I believe I have gotten around just by checking for it and rebooting before it installs the software. The issue is that the Windows update could
and usually is one of those lovely updates that requires multiple reboots. The second reboot is killing my task sequence.
The issue is I need to somehow force this updates to run after my task sequences or make sure they run first. The only way I can think of this is by having
priorities for the task sequences. I can't just add installing the updates to the task sequence, because the second reboot will kill my whole task sequence there too.
Anyone have any ideas on how to get around this issue? I want the machines to install the Windows updates so I can't just remove them from the collection.

That's definitely the best option to do everything via the task sequence deployment.
Also, there are script available in the community to add or remove a device from a collection, see for example:
http://sccmfaq.wordpress.com/2013/05/20/sccm-2012-sp1-remove-client-from-collection-after-osd/
Keep in mind that if you want to use a script like that during the task sequence that the device running the task sequence (and by that the script) requires specific rights within ConfigMgr.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How i create report on sccm 2012 based on saved query or collection

i tray to create report based in saved collection or query
i copy query statement and create new report example
(select SMS_G_System_PRINTER_DEVICE.DriverName, SMS_G_System_PRINTER_DEVICE.Name, SMS_R_System.Client, SMS_R_System.IPAddresses, SMS_R_System.Name from SMS_R_System inner join SMS_G_System_PRINTER_DEVICE on SMS_G_System_PRINTER_DEVICE.ResourceID =
SMS_R_System.ResourceId where SMS_G_System_PRINTER_DEVICE.Name >= "HP LaserJet" and (not SMS_G_System_PRINTER_DEVICE.DriverName >= "microsoft office") and (not SMS_G_System_PRINTER_DEVICE.DriverName >= "ZDesigner") and
(not SMS_G_System_PRINTER_DEVICE.DriverName >= "Send To Microsoft") and (not SMS_G_System_PRINTER_DEVICE.DriverName >= "PDF Complete Converter") and not SMS_G_System_PRINTER_DEVICE.DriverName like "Microsoft XPS Document Writer"))
i paste the query statement when i execute the query appear error as in photo in link
please help me
http://social.technet.microsoft.com/Forums/getfile/527879

Your picture doesn't seem to work.
Your query above is in WQL, however reporting uses SQL. You will need to translate the query to SQL first.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Need instructions to create application in SCCM 2012 for Captivate 8

Similar Messages

Maybe you are looking for