Need Intel ICH5R Driver to boot in DOS.
Need to be able to access my Intel® ICH5R Chipset RAID0 in DOS to create/load GHOST image of my system. Does Intel® ICH5R Chipset have DOS drivers?
Aulex: What version of Ghost are you using? Does it use 2 floppies? and the first one is essentially a WIN98Se boot floppy? and the second one is the Ghost recovery floppy?
If so, the boot floppy usually contains about 5 or 6 universal ASPI drivers some of them are SCSI drivers. When I use drive image 5.01 to restore my system using floppies, the boot floppy loads these drivers. (If the drives are formatted NTFS, DOS won't see them at the DOS prompt.) When I put in the second floppy and run D.I. 5.01, it sees all the drives, whether they are formatted FAT32 or NTFS, including both my RAID 0 volumes, one of which uses the ICH5R. I can do a backup or restore.
The reason I don't have to load 'DOS RAID' drivers is because the onboard (Promise, HighPoint) and onchip (ICH5R) RAID controllers are fancy SCSI controllers and the universal drivers that are loaded from DOS boot floppy work.
So if your Ghost bootable floppy(s) contain these drivers, give it a try.
FYI: Drive Image 7.0 askes you for the RAID drivers (the F6 prompt, like when you install Win XP). You actually use the D.I. 7 program CD to boot, then it asks you for RAID drivers.
Let us know!!!
Similar Messages
-
Windows 8.0 pro needs an NTFS drive but boot camp didn't make one
Just got a new macbook pro and went through the steps to get windows 8 pro on the machine as well. all seemed to go well until windows asked which drive to install windows on. I selected the one i had partitioned to 50gb.
Error. windows needs an NTFS drive to install to.
Any ideas?
I've read some ways of "turning on" NTFS support on the mac book but as Apple doesn't "support" it, will I be putting my machine at risk for technical help from Apple if I do the command line stuff?
It seems pretty silly to go through all these steps and then find that the drive that has been partitioned isn't the correct version.
Any help gratefully received.
ShaunYou are not following the Boot Camp Installation instructions located here: http://www.apple.com/support/bootcamp/. You do not format the Boot Camp partition, you follow the instructions about formatting, especially the part about selecting the advance option and selecting format.
-
Intel Xserve won't boot from 3rd party drive in ADM
Right, I've got a Late 2006 Xserve Dual 2.66 with the normal non-RAID SAS/SATA board, which has been running fine for 2 years with a pair of non-Apple Seagate Barracuda ES 250GB drives (Bay 1 & 2), and an original 80GB ADM in Bay 3 as a spare boot disk.
Bay 1 & 2 are set up using SoftRAID and are partitioned into a boot volume (30GB) and a data volume (200GB), both RAID 1 mirrors. The boot volume is cloned nightly to Bay 3 (single volume, set up using Disk Utility). Data is backed up to a utility machine, so this is arrangement lets me handle any single drive failing.
This arrangement has worked fine for 2 years, and allows me to remotely boot off Bay 3 and run DiskWarrior or other disk maintenance software on the normal boot drive without having to drive across town with a firewire drive. I originally started with Mac OS X Server 10.4, but I'm now on Mac OS X Server 10.6.4.
Where things have come unravelled is, I need to upgrade the two 250GBs to something larger. I didn't realise that the Intel Xserve is pretty fussy with ADM sleds and the model of SATA drive they will work with. I didn't have any issues when I set up the Barracuda ES 250GB so wasn't expecting any problems this time.
I bought a pair of Seagate Constellation ES 500GB drives (well 3 actually, one to keep on the shelf as a spare).
I installed them in the sleds and inserted them in the Xserve. The green power LEDs came on but the drives weren't recognised in Disk Utility or System Profiler. I then added the jumper to set them to 1.5Gb/s and then they mounted. I went through my normal process of cloning the OS to them from a standard disk image I have of a known working OS install, ran Disk Utility to repair disk & repair permissions, Disk Warrior to check everything else (my standard paranoid procedures). Set the startup disk to the new install and rebooted. No joy, just the flashing question mark folder. Reboot with the option key, and the new volume doesn't appear in the list of available boot options.
I installed the drives in a firewire enclosure, and it booted without any problems, so it's not a corrupt install, it's something to do with the ADM sleds.
So to go back to basics, I tried initialising a single drive as a single volume and installed 10.6.4 server fresh from the DVD. Same result, no boot when in installed in ADM sled, boots fine in firewire case.
Erased drive, changed formatting to APM (rather then GPT), cloned OS, etc. Won't boot when in ADM sled, boots fine from firewire case. So that screws the theory that drives have to be GPT to boot on Intel hardware.
So I ordered a set of WD RE3 500GB drives (x 3) and repeated this whole process. Same deal, boots fine in firewire, won't boot when installed in ADM. GPT vs APM doesn't make any difference.
Try #3. Ordered desktop variants rather than server class drives. So armed with a pair of WD Caviar Black 500GB. Same deal, boot fine from firewire, will not boot when installed in ADM. Also required jumpers for 1.5GB/s and also the undocumented pins 7&8 (apparently this might be related to the new Advanced Format they are using)
Try #4
A pair of Seagate Barracuda 7200.12 500GB. This is where it gets tricky. One of the Barracuda will boot the Xserve when installed in an ADM, and one will not. So 2 Barracuda 7200.12, both same model number (ST3500418AS), both same firmware (CC38), yet they behave differently.
Try #5
Barracuda ES.2 250GB (x 3). Won't boot in ADM, will boot firewire.
Try #6
WD Caviar SE16 250GB (WD2500KS)
Boots in ADM (Yay!!) and firewire
Try #7
WD Caviar SE16 500GB x 2 (WD5000AAKS)
Boots in ADM and firewire
I've managed to get access to G5 Xserve (2.3DP) so I've repeated all this testing on it as well. The G5 doesn't care about the model of drive and boots from any of them using a 10.5.6 install with APM formatted drives.
I've tried all these drives in 4 different models of ADM sled. One thing I have determined is that the model of sled determines if you need to use the 1.5GB/s jumper. I have 2 sleds from G5's, they require the jumper, a 80GB Intel ADM sled with separate data and power plugs requires the jumper, and an Intel 160GB ADM sled with the ribbon cable and combined data/power plug doesn't require the 1.5GB/s jumper. APM vs GPT formatting again makes no difference.
So on the Intel machine, the drives work in the sleds, appear as normal drives on desktop or in Disk Utility when logged in, and also appear as normal drives when connected via SSH if Auto Login is disabled. So to me they appear to be working drives.
It appears to me that something changed at a low level between the Barracuda ES and ES.2 generations of drives (for WD drives as well since the Caviar SE16 that boots is a similar age to the Barracuda ES)
So then why won't it boot from them? Is there some magic dance I've missed?
And how come one of the 7200.12 will boot, while another identical model won't?
Any tips or suggestions greatly appreciated.I don't have an answer for you, but you deserve thanks for all the useful hardware information you posted from your trial-and-error testing.
My impression has that the XServes need specific kinds of firmware and hardware monitors on their drives in order for everything to function smoothly. My own efforts swapping drives in ADMs has produced "mixed results" to put it mildly. It would be so much easier if we knew what kinds of drives worked properly in what kinds of ADMs and on which Macs/XServes. -
Need help with Kernel Panic because of Intel Graphics Driver???
Hi,
I was using my mini mac has usual and it crashed! It seems to be related to the intel driver. Dont think I updated recently, although little snitch demo license did seem to run out just before it happened.
At first I could even log into to safe mode, but after several single user mode disk checking I seemed to be able to login through safe mode. Unfortunatley I cant role back, even if this was successful, through my timecapsule because I foolishly(Dont most people do this???) repartitioned my HD and lost my hidden recovery partition.
Anyway, I was thinking that if I can login through safe mode could I copy the driver that it is using to my normal bootup mode??? I have included my kernel panix below. Hope someone can help?
Fri Jun 8 16:44:29 2012
panic(cpu 0 caller 0xffffff80002c473a): Kernel trap at 0xffffff8000293858, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff8104718308, CR3: 0x0000000000100000, CR4: 0x00000000000606e0
RAX: 0xffffff8004709870, RBX: 0xffffff80046f2f08, RCX: 0xffffff80008bc8c0, RDX: 0x0000000000000060
RSP: 0xffffff80f05ab750, RBP: 0xffffff80f05ab770, RSI: 0xffffff80047182b8, RDI: 0xffffff80008bc920
R8: 0xffffff8104718300, R9: 0xffffff80f05abba0, R10: 0x0000000000000000, R11: 0x0000000000000001
R12: 0x0000000000000000, R13: 0xffffff8000802228, R14: 0x00000000000000ba, R15: 0x0000000000000006
RFL: 0x0000000000010283, RIP: 0xffffff8000293858, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff8104718308, Error code: 0x0000000000000002, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f05ab400 : 0xffffff8000220792
0xffffff80f05ab480 : 0xffffff80002c473a
0xffffff80f05ab630 : 0xffffff80002da0cd
0xffffff80f05ab650 : 0xffffff8000293858
0xffffff80f05ab770 : 0xffffff800026a07a
0xffffff80f05ab870 : 0xffffff80002883fc
0xffffff80f05abbd0 : 0xffffff800026721d
0xffffff80f05abc40 : 0xffffff8000648c71
0xffffff80f05abd50 : 0xffffff800064763b
0xffffff80f05abd80 : 0xffffff7f816e990f
0xffffff80f05abde0 : 0xffffff7f816eceaa
0xffffff80f05abe20 : 0xffffff7f81719d36
0xffffff80f05abe60 : 0xffffff800062937d
0xffffff80f05abeb0 : 0xffffff8000629bae
0xffffff80f05abf30 : 0xffffff8000629f29
0xffffff80f05abf70 : 0xffffff8000628b0f
0xffffff80f05abfb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelHD3000Graphics(7.1.8)[3907A4CB-8AA1-3F6B-B052-8BA001 8E9C83]@0xffffff7f816cc000->0xffffff7f817acfff
dependency: com.apple.iokit.IOPCIFamily(2.6.8)[F63D4ABE-42DA-33EF-BADD-3415B0CB0179]@0xffff ff7f80826000
dependency: com.apple.iokit.IONDRVSupport(2.3.2)[D05CFB53-FB72-3613-8162-2D188DB04738]@0xff ffff7f80ca8000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[2D2A4A31-EB4F-3730-BE3A-76C061685FC5]@0 xffffff7f80c70000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: Macmini5,1 (Mac-8ED6AF5B48C039E1)
System uptime in nanoseconds: 17244651626
last loaded kext at 16299815158: com.apple.driver.ApplePlatformEnabler 2.0.5d2 (addr 0xffffff7f81639000, size 20480)
loaded kexts:
at.obdev.nke.LittleSnitch 2.5.1
com.apple.driver.ApplePlatformEnabler 2.0.5d2
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.42
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleIntelHD3000Graphics 7.1.8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCPDRC 5.0.0d0
com.apple.iokit.IOBluetoothSerialManager 4.0.5f11
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d0
com.apple.driver.AppleLPC 1.5.8
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.5f11
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.0.3
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AirPort.Brcm4331 530.4.20
com.apple.driver.AppleSDXC 1.2.0
com.apple.iokit.AppleBCM5701Ethernet 3.1.2b2
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleUSBUHCI 4.4.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.8
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 193.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.driver.AppleIntelCPUPowerManagement 193.0.0
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleHDAController 2.2.0f3
com.apple.iokit.IOHDAFamily 2.2.0f3
com.apple.iokit.IOAudioFamily 1.8.6fc17
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.driver.AppleSMC 3.1.3d8
com.apple.driver.IOPlatformPluginLegacy 5.0.0d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.0d17
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleIntelSNBGraphicsFB 7.1.8
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.2
com.apple.driver.AppleThunderboltDPInAdapter 1.8.2
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.2
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.5f11
com.apple.iokit.IOBluetoothFamily 4.0.5f11
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.driver.AppleThunderboltNHI 1.5.5
com.apple.iokit.IOThunderboltFamily 2.0.0
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.6
com.apple.iokit.IOStorageFamily 1.7.1
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4pbhacker wrote:
Ok. That sounds like a good idea. I do have an image stored on my time capsule. The problem is I can see it whn in safe mode!!! I know the capsule is working correctly because I can see it from another mac.
There is an application called 'restore from time machine...' Can I run this from safe mode??? Tried downloading the restore from usb app but this says that it cant install because the partition was removed!!! How can I use my time capsule to restore to this image???
You need another drive to boot from and this is why I suggested using a directly connected External HD instead of the Time Capsule, plus then you will still have the Time Capsule to fall back on for your data...
pbhacker wrote:
Looks like it was the NEW memory!!! Although I do have a problem...
1. First, I tried the old memory(2 x1GB). That seemed to work.
2. Then I tried the NEW memory again(2 x 4GB). Crashed like it has done in the past.
3. Then I tried the new and old memory(1GB + 4GB). Booted but then crashed when I logged in.
4. Finally tried one new memory stick(4GB). That seems to be working ok.
So, the question is it the NEW memory or is the mac? How can I test this? I guess I cant use the ATH application because there is no memory in that slot?
Any ideas?
You need to reinstall 10.7.4 somewhere so that you have a Restore Partition to work from.
For the AHT see > OS X Lion: Use Apple Hardware Test -
I need to use windows in order to use Visual C++ for college but I don't have enough space in my internal Hard Drive so I want to install windows 7using boot camp or any other method on a portable hard drive and boot from it.
Please help I need it as soon as possible for school. ThanksYou can't boot Windows natively except on internal drives.
You can use a VM and put the VM image (VHD) anywhere any drive you want.
You are way too low on disk space, seriously so. And no room - even Windows and Mac OS should be warning and balking already.
"emulator" is an old-school term, even true, running a Guest OS under Mac's as a virtual machine, shared resources (RAM, processor) is easier but not the same performance level as running natively.
Comparison of VMware Fusion Parallels VirtualBox
This just posted, an FAQ for Lion and Boot Camp 4.0
Boot Camp 4.0, OS X Lion: Frequently asked questions -
Buyig CD drive to boot Lombard from -need advice
I I am thinking of buying a CD drive for my Lombard G3 M5343 bronze laptop. I need a CD drive so I can Boot OS. currently I just have a third party DVD drive that I cannot boot from.
The question is can I boot from this drive(e-bay):
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=130106605876
Mac Bronze Lombard/Pismo G3 Powerbook CD-ROM M7388 24x~x'lnt shape! ~
Tested good 24x CD-ROM drives for Mac Bronze Lombard or Pismo G3 Powerbooks. CD-ROM model Number: M7388.
Lombard Powerbook G3 M5343 Mac OS 9.0.xAs advised before by cornelius, it could be wiser to look at a computer store for a replacement part (warranty, return, more secure than eBay).
An other good address is http://www.ifixit.com (can't say anything about this company, but they are providing nice DIY guides). -
Need Intel HD display driver for my Satellite A660
I recently have tried to use Windows Movie Maker, but get error message to say the Intel HD driver installed is blocked. (version 8.15.10.2014).
When I try and update via the Intel updater am told cannot update as Operating Manufacturer has configured the device, but there is no more recent version on the driver downloads for my machine on the Toshiba support pages.
I have updated the Nvida card drivers no problem via the Nvida website, but how can I update the Intel one??Please advise as this is driving me nuts.
My machine is a Satellite A660 running Windows 7 Home Premium 64bit, with an Intel Core i5-480m processor and Intel(R) HD Graphics card.Hi
Intel Core i5-480M supports the Intel HD graphics and the newest driver could be downloaded directly from Intel page:
https://downloadcenter.intel.com/SearchResult.aspx?ProdId=3231
The installation is a little bit tricky.
First of all you would need to download the ZIP package where all the singles driver files are zipped in the folder.
Then you should update the driver within the device manager.
Here you have to start the Advanced installation procedure which allows you to choose the downloaded and unzipped folder.
This update procedure works for me like a charm -
Need help installing Intel Lan Driver on a Satellite A100-011
I have bought Toshiba Satellite A100-011 notebook with Windows Vista. Now I downgraded the os to Windows XP. The problem is how to install Intel Lan Driver. I would really appreciate any help, because there is no .exe file and I have no idea, what to do with those files.
Hi buddy,
the files which are in the zip file are really the drivers but you have to install them manually which means you must go to the device manager, search for the LAN device which probably should have a exclamation mark and then right-click on it. After clicking a wizard should appear which leads you trough the installation process. When the wizard asks for drivers (if not already automatically found) then point on the folder where the driver files are located.
Then everything should be fine. :)
Greetings -
Intel IMac will not boot OSX Tiger
Hi guys, I just wanted to let you know that I am reading and trying to do my home work on why my Intel I-Mac will not boot. It all started after running Windows Vista using Apple Boot Camp. I just wanted to list a few things I have tried after getting replies from posting in some other forums. I will try here since a few people are having similar issues. Any tips would be appreciated. Please no flames
1. If I hold the C button while booting to boot from CD-ROM I get a panic alert.(panic alert meaning lockup, I have to restart or press and hold power button)
2. Holding down D button upon startup will run Apple Hardware test just fine, but no errors found.
3. I can press Option-Command-P-R to reset NVRAM successfully.
4. I can press Option during startup to start the Startup Manager. I can see my Macintosh Hard Drive and CD-ROM, but get a panic alert if I click on either icon. I’m not sure what happened with the Windows Vista hard drive Icon.
5. I can press N during startup to start up from a compatible network server. I see a flashing globe and then a panic alert. Not sure what this function is for.
6. If I press T during startup for Start up in FireWire Target Disk mode, I get a weird symbol that looks like a Y floating around the screen. I have no idea what target disk mode means.
7. If I press Shift during startup to boot in Safe Boot mode, I get a panic alert.
8. If I press Command V during startup for Verbose mode, it appears that I am at a Unix style Command Prompt that hangs.
9. If I press Command S during startup for Single-User mode, I am at the Unix Command prompt which works, but I do not know any commands except fsck –fy which I guess is like a DOS CHKDSK command that tells me my Volume appears OK.
10. Pressing Option-N during startup to start from a NetBoot server using the default boot image gives me the flashing globe icon again, and then hangs.
11. I tried resetting the System Management Unit thanks to the Unix forum guys, but still have the same problems.
12. My next step is to find a Mac friend to burn the Firmware Restoration CD file I downloaded thanks to Michael from the Unix forum. If that does not work I will try whatever you ask.
13. I can boot my I-Mac using a Linux Live CD called Slax and surf the net and play with the software. It runs just great; I just don’t think this 200MB version has the capabilities to format the hard drive or Install to hard disk like Fedora Live does. By the way, the Fedora Live version of Linux hangs after booting from the CD. It boots just fine on my PC.Greetings,
Somehow or other you will need to be able to boot to the Installation Disk #1 that came with your computer - as you know they are specific to each machine model. After a successful boot to that disk, you can use Disk Utility to remove all of the partitions, wipe that puppy clean, then repartition and make sure you use the GUID partition scheme - you really only need the Bootcamp Assistant if you have multiple drives, internally, and since you have an iMac, your good to go.
When you booted to your Linux disk, could you see the internal hard disk? If so you should be able to open one or two of the folders just to be sure that the disk is OK.
A worst case scenario would be to have to install a fresh hard drive. Do you have any way of borrowing another install DVD for that model to try to get it to boot? That's the key to this whole project.
Try this - Go back into single user mode and issue these two commands in this order:
/sbin/fsck -fy
/sbin/mount -uw /
Watch the spaces and then issue a "reboot" at the prompt.
During this, the fans will likely come on at a high speed and may stay on for a while and maybe until you do a shutdown and reboot.
I hope this helps a little, and once you get the machine booting to the Installation Disk #1, again, you'll be all set.
You don't say, but is this unit under warranty - I know it may be a stupid question on my part, but if it is, give them (Apple) a call and get some advice on the waranty actions.
Good Luck my friend.
Cheers,
M. -
HELP! INTEL ICH5R Controller/S-ATA - "No RAID"
Hi to all who gave me advice for setting up two S-ATA drives on the Intel ICH5R controller with "NO" RAID. I really need some help.
Well, I got my two "NEW" S-ATA drives this afternoon and after following the advice given by several users in this thread, I'm having ptoblems trying to install Windows XP and I'm getting messages like "missing operating system", "Invalid system disk, (when XP CD is in CD drive) replace the disk and press any key", so I need some help please.
Ok, I setup the BIOS settings in Integrated Perpherals/On-Chip IDE Configuration to:
Mode: NATIVE
ATA Configuration: S-ATA Only
Keep S-ATA Enabled: YES
Keep P-ATA Enabled: YES
P-ATA Channel Selection: BOTH
Configure S-ATA as RAID: NO
BTW, given that I will have two Seagate S-ATA drives on SER1 & SER2 and one P-ATA drive (LG CDRW) on IDE1 as Master and the other P-ATA drive (LG DVD) on IDE2 as Master, I was just wondering if the "other options" in "On-Chip IDE Configuration" may be causing my problems and need to be altered and if so, what to?
I.e. "Combined Mode Option" and S-ATA Ports Definition"
I then switched off the computer and connected my two Seagate S-ATA drives
(ST380013AS 7200.7 80GB on SER1 & ST3120026AS 7200.7 120GB on SER2).
I turned on computer and drives were shown on POST screen as "Third IDE Master (80GB) and 4th IDE Master (120GB). I then entered BIOS to check if they were shown and they were and I selected the "ST380013AS 7200.7 80GB drive" as my 3rd boot device with the CD as my first boot device and the floppy as my second.
BOTH drives were already set to "AUTO", but the label on the physical drives states that you should choose "AUTO" and enable "LARGE BLOCK ADDRESSING (LBA), but I could not see an option for this. I did not get any software with the disk but the drive label states that you chould use "Disc Wizard" but I did not have this so I used an updated Boot Floppy that works with drives up to 137GB. I FDISK'd the 80GB drive and formatted it to FAT32 (although I would not normally do this because XP setup always finds my new partitioned ATA133 drives and starts setup and then formats it).
Note: During format, the drive was shown as "Formatting 10,780.56M" and for an 80GB drive, this did not seem right but after formatting, it showed as 76,297,91MB total disk space. FDISK showed the drive as 76,317MBytes.
Also in the BIOS, the 80GB drive is shown with "CYLINDERS:38309", "HEADS:16", SECTORS:255", MAXIMUM CAPACITY:80GB and "WRITE PRECOMPENSATION:(nothing was shown for this - what is this and should there be a reading for it)?
I then restarted the computer with the XP CD in the Master CD drive and the cd was found and showed "Press any key to continue......" but this was quickly followed by "Invalid System Disk - Replace the disk and press any key".
I tried this many times but always get the same message. Can anyone who has setup S-ATA drives on ICH5R with "no RAID" and then installed a fresh copy of XP, please help, or anyone who can help with this, I would be very grateful.
Regards
Brave01HeartHi
Ok, I have some more information regarding the Intel ICH5R Controller and S-ATA drives.
I tried your suggestions of " Both SATA+PATA in "On-Chip IDE Config"...." and also a few others, but it made no difference and I still got "invalid disk message". Some changes like "P-ATA only" made my CDRW/DVD drives not show up during POST or in the BIOS or My Computer.
I then used the original advice I was given:
Mode: NATIVE
ATA Configuration: S-ATA Only
Keep S-ATA Enabled: YES
Keep P-ATA Enabled: YES
P-ATA Channel Selection: BOTH
Configure S-ATA as RAID: NO
but also changed "Combined Mode Option" to "S-ATA 1st Channel and the "S-ATA Ports Definition" to P0-1st. /P1-2nd. I then inserted the XP CD and restarted the computer and this time XP installation went ahead without any 'invalid disk' messages and XP was installed without problems but I have noticed a few weird things which I would like some help with please, especially Q1:
Q1: During POST, both my S-ATA drives which are on SER1 & SER2, were shown as the Third and Fourth IDE Masters and as UDMA 5. Surely this can't be correct?
I know ATA133 is UDMA 6 and the S-ATA drives are supposed to run at 150Mb/sec but I don't know if there is a standard for that speed at the moment but it should not be shown as UDMA 5 on POST and also in Device Manager? At the very least it should be UDMA 6?
Q2: In Device Manager/IDE ATA/ATAPI Controllers, it shows:
Primary IDE Channel
Device 0 Current Transfer Mode: Ultra DMA 5 (S-ATA 80GB Drive)
Device 1 Current Transfer Mode: Not applicale
Primary IDE Channel
Device 0 Current Transfer Mode: Not applicable
Device 1 Current Transfer Mode: Not applicable
Secondary IDE Channel
Device 0 Current Transfer Mode: Ultra DMA 5 (S-ATA 120GB Drive)
Device 1 Current Transfer Mode: Not applicable
Secondary IDE Channel
Device 0 Current Transfer Mode: Ultra DMA 2 (LG CDRW Drive)
Device 1 Current Transfer Mode: Ultra DMA 2 (LG DVD Drive)
??Standard Dual Channel PCI IDE Controller?
??Standard Dual Channel PCI IDE Controller?
?? After installing the Intel .INF Update, these entries changed to "Intel 82801EB Ultra ATA Storage Controllers". With my two previous ATA133 drives installed in the same computer, there was only one "Intel 82801EB Ultra ATA Storage Controllers" in Device Manager, so with the S-ATA drives installed, why are there now two entries in Device Manager?
Q3: In "My Computer", the total capacity of my Seagate S-ATA 80GB drive is shown as 74.5GB (80,015,491,072 Bytes). Iknow that the CMOS value is considerably less that the purchased disk size, but where has the other 4.5GB gone?
Q4: What is the purpose of the second "Primary IDE Channel" entry in Device Manager?
Regards
Brave01Heart -
Prepare an usb thumb drive, to boot windows 7 or 8 in UEFI mode
Purpose of this post:
Prepare an usb thumb drive, to boot windows 7 in UEFI mode and install the system in pure UEFI mode.
Why am I writing this:
I had a hard time finding out how to make a custom installation of windows 7 in pure UEFI mode, and avoid using the factory restore disks. After hours of research, experiments etc I finally got the point and found a solution. And I'm happy to share my research with you. I hope this will be of help. If something is not clear, or more information is needed, I will be glad to explain things further.
History:
As most of you already know, BIOS was developed for PC in early eighties and has remained unchanged in recent years. But, since 2000, Intel started working on a new firmware interface, called Extensible Firmware Interface, abbreviated EFI. And since 2005 United EFI Forum has been handling the responsibility for development, management and promotion of UEFI specifications. Bigger companies like Intel, AMD, Microsoft and Dell have already started to bring out their products in accordance to UEFI standards which has more stable, secure and easier to use interface.
How does UEFI works (in a nutshell):
Once you power on the UEFI based PC, the Pre-EFI is executed which initializes only the CPU, memory and the chipset. This followed by Driver Execution Environment (DEX) where other hardware is initialized.
Advantages of UEFI:
It can integrate various drivers this will not require to load during booting so saves time.
PC can connect to network without OS.
Also integrated drivers allow rendering GUI based control panel which out dates the old school bluish BIOS screen.
Not all the installed hard drives are scanned as boot drive is set during the installation of OS in UFFI.
Applications like anti-virus and diagnostic tools can be stored on virtually any non-volatile storage devices attached to a PC.
For a system to boot and install in UEFI the partition table of the HDD should be GPT (GUID Partition Table), not the old school MBR (master boot record). GPT has many advantages, can have virtually an unlimited number of partitions (windows will allow only 128) and impressively big partitions.
Since UEFI has a lot of advantages why not having a system install and boot in UEFI mode? AFAIK new Lenovo notebooks/netbooks are UEFI capable and OS’s are already installed in pure UEFI mode.
So, let’s go now to the point. Do you want to have more control over your HDD? Let say, you have a 320GB HDD and you have divided it in two partitions, one of 50GB, for your Windows 7, and the remaining for your data. If something goes wrong and you need to restore your system to factory default, with the recovery disks, it will wipe your partition scheme, set the system to default and this way your data will be lost.
You may want to make a “vanilla” installation of windows from a USB thumb drive and avoid using factory recovery disks. Now here things get complicated. A standard preparation of the USB with Microsoft’s software (Windows 7 USB/DVD Download Tool), or other tools, will give you a bios installation, not a UEFI one. So for the system to boot, you will need to change some settings in bios, and changing it from UEFI to legacy bios. The installation will prepare the HDD in MBR partition table, and you will lose all the advantages of UEFI, described above.
Now this can be avoided, by properly preparing an USB to boot and install in UEFI mode. Here are the steps:
Step by step tutorial:
1. In a windows computer, download a legal copy (although trial) of the windows 7 os. You can do this from here: http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Be sure to download the same version that came preinstalled in your computer. For example, if you have a Lenovo x120e, with a Windows 7 professional, 64bit, download an iso image of the Windows 7 professional 64bit.
2. Once downloaded burn the iso to a USB thumb (at least 4GB) using Windows 7 USB/DVD Download Tool.
3. After preparing this, create a folder on your computer, name it whatever (i.e. W7pro64bit). Go to the root of your USB
and select all the files and folders there (9 in total) copy, and paste to your folder you created, W7pro64bit.
4. Using windows format the usb again in FAT32. Windows 7 USB/DVD Download tool, formats it in NTFS. We need a FAT32 formatted disk to achieve our goal. Formating again the USB in FAT32 will not touch the MBR of the USB thumbdrive. And after copying back the files (see step 6) the USB will still be bootable. (nice, and simple, isn't it?)
5. Now go to the folder W7pro64bit and do the following:
a. Browse to W7pro64bit\sources\ and open install.wim file. It’s a big file, and can be opened as an archive with 7zip (free software). Do not extract it, do not modify it, just browse the file with 7zip. Just to be sure you do not mess with that file, you can copy it somewhere else in your computer, and than procede.
b. Browse this file (install.wim) to \1\Windows\Boot\EFI\ and locate the file bootmgfw.efi. Do not move, delete it, but just drag that file to the desktop. (if you have copied the file install.wim to another place in your computer, than you are safely do whatever you want with that file ) Close the 7zip program to release the install.wim file.
c. Rename the file you just copied to the desktop from bootmgfw.efi to bootx64.efi.
d. Now go back to w7pro64bit folder and browse \efi\Microsoft. Form there copy the folder boot and paste it one level up, on the folder: \efi. It will look like this: \efi\boot.
e. Now copy the file you saved on your desktop and renamed (bootx64.efi) to \efi\boot (inside the boot folder you copied on step 5d
6. Now go to the root of the folder W7pro64bit and select all folders and files (9 in total) copy, and paste all those files back to your USB thumb drive. (see step 4 for more info)
7. Go to the computer that you are going to reinstall, and before restarting it, use the program ABR (activation backup and restore) to backup the license of your windows os. (use google to find ABR). Advanced Tokens Manager (ATM ) is great too. This link may be of help: Backup and restore W7 activation. After the program finishes its magic, it will create a few files inside the folder where the program itself reside. Copy these files to a new folder in your usb. Rename it to ABR so you will quickly find it later. (if you decide to use ATM, the procedure may be a little different. But you are smart enough to figure out how to use it)
8. Backup to an external storage all your data before continuing.(reminder: are you sure you saved the license as explained in step 7, to a safe place? To a external drive, to another computer? If you are sure, than go on with step 9)
9. Now restart your laptop, and enter your bios settings. Go to the boot settings, and set the computer to boot in UEFI only. Not both, not UEFI first, or legacy, BUT UEFI only. Save and restart.
10. Press f12 (or the corresponding key for your machine) to choose the boot device and chose to start from the USB thumb drive with your windows 7 pro 64 bit.
11. If everything is done correctly, your computer will boot from the USB.
12. Follow the wizard and choose a custom install, not upgrade. At the disk partition window delete all the partition you see there until you have only one unallocated space.
13. Select it, and click next to install windows, without making partition in this point. The installer will create a GPT partition table not a MBR since the USB booted in UEFI mode.
14. Immediately after the first restart remove your USB thumb, and the installation will continue from the HDD. Wait until installation finishes.
15. When you will be finally on your desktop, on the installed OS plug your USB go to the ABR folder and click on restore.exe. It will restore your license and your copy of windows will be activated.
16. Now you can go in computer management/disk management and shrink the HDD to create your partitioning scheme. Make sure to leave enough space to your windows os. (30gb or more for extra programs you will install at your choice)
17. Download from lenovo.com thinkvantage system update and update your system. Windows update too can install all the necessary drivers, if you need only basic drivers support.
Note: if tvsu will fail to work, see this:
http://forums.lenovo.com/t5/ThinkVantage-Technologies/ThinkVantage-System-Update-Servers-down-the-wh...
It may look a looong tutorial, but once you do this for the first time, it will look a piece of cake.
Final words:
From now on, you can install windows 7 in UEFI mode with your special USB without changing your partition scheme anymore. If you have a data partition beside your os partition (see the example above), when you reinstall the system using your USB thumb drive, at the disk partition window chose the partition where windows is installed, delete it, and reinstall windows to the unformatted area. Your partition with your data will be intact and the installation will automatically mount your data partition to the system. And, all the scope of this procedure, you will always have a pure UEFI installation of the system, with all its benefits.
Have fun!
abvasili
Moderator note: changed subject to match new content. Was: Prepare an usb thumb drive, to boot windows 7 in UEFI mode
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.seanare wrote:
Thank you, as I noted here, your post was the key to my getting a Windows 8 SecureBooting setup on a W530.
In the case of Windows 8, I needed to copy the files away, reformat my USB key as FAT32 and copy the files back, and viola I was able to boot from my USB install media with the BIOS set to only boot UEFI. From there, there rest was easy (for Windows 8, the copying and renaming is not necessary, the key is having a FAT32 partition on the USB media, rather than an NTFS one; the EFI files are already in the right location).
Thank you again good sir.
You are welcome... and I'm happy that the change of the file system helps with windows 8 too. Thanks for confirming that.
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode. -
[SOLVED]Asus UX32VD, problems with ACPI and Intel video driver
1. The bigger problem seems to be Intel video driver:
When xf86-video-intel is installed, screen stays black after booting. By adding "nomodeset" to grub doesn't help. If I don't start gdm while booting, I can boot to command line with "nomodeset". From command line I tried "startx", but X doesn't start, probably because "nomodeset" has disabled KMS and I've understood that Intel driver needs KMS for GNOME.
When xf86-video-vesa is installed instead of intel driver, screen is still black. By adding "nomodeset" to grub, I can see only mouse at gdm. If rebooting computer without gdm, I can start gnome from command line with startx and it works nice.
In both setups I can connect to laptop with ssh when screen is black. With ssh I checked screen brightness, but it was maximum.
Intel driver version: xf86-video-intel 2.20.1-3
2. The problem with ACPI is found from dmesg, I don't think this effects to graphics problem, because with vesa driver and "acpi=off" set to grub I can start Gnome with startx. I don't even know if it effects at all on my system, dmesg shows error which effects to displayport( intel_dp_i2c_aux_ch error) these maybe related to each others:
[ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
[ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120320/psparse-536)
[ 2.738789] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
[ 2.741836] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
There is log files while booting with Intel driver and gdm set to start at boot in rc.conf, the screen is black, but got logs with ssh:
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] BIOS-e820: 0000000040005000 - 00000000c97be000 (usable)
[ 0.000000] BIOS-e820: 00000000c97be000 - 00000000c9dbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c9dbf000 - 00000000c9dc2000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9dc2000 - 00000000c9dd7000 (usable)
[ 0.000000] BIOS-e820: 00000000c9dd7000 - 00000000c9ddd000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9ddd000 - 00000000c9ddf000 (usable)
[ 0.000000] BIOS-e820: 00000000c9ddf000 - 00000000c9de4000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9de4000 - 00000000c9f3d000 (usable)
[ 0.000000] BIOS-e820: 00000000c9f3d000 - 00000000c9f41000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9f41000 - 00000000c9f8b000 (usable)
[ 0.000000] BIOS-e820: 00000000c9f8b000 - 00000000c9f92000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9f92000 - 00000000c9f94000 (usable)
[ 0.000000] BIOS-e820: 00000000c9f94000 - 00000000c9fb2000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fb2000 - 00000000c9fb5000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fb5000 - 00000000c9fb7000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fb7000 - 00000000c9fce000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fce000 - 00000000c9fd4000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fd4000 - 00000000c9fdc000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fdc000 - 00000000c9fdd000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fdd000 - 00000000c9fec000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fec000 - 00000000c9fed000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fed000 - 00000000c9ff8000 (usable)
[ 0.000000] BIOS-e820: 00000000c9ff8000 - 00000000c9ffd000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9ffd000 - 00000000ca01c000 (usable)
[ 0.000000] BIOS-e820: 00000000ca01c000 - 00000000ca01e000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca01e000 - 00000000ca032000 (usable)
[ 0.000000] BIOS-e820: 00000000ca032000 - 00000000ca033000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca033000 - 00000000ca045000 (usable)
[ 0.000000] BIOS-e820: 00000000ca045000 - 00000000ca06b000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca06b000 - 00000000ca07f000 (usable)
[ 0.000000] BIOS-e820: 00000000ca07f000 - 00000000ca080000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca080000 - 00000000ca081000 (usable)
[ 0.000000] BIOS-e820: 00000000ca081000 - 00000000ca083000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca083000 - 00000000ca084000 (usable)
[ 0.000000] BIOS-e820: 00000000ca084000 - 00000000ca089000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca089000 - 00000000ca0a1000 (usable)
[ 0.000000] BIOS-e820: 00000000ca0a1000 - 00000000ca645000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca645000 - 00000000ca8c5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ca8c5000 - 00000000ca8ca000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ca8ca000 - 00000000ca8cb000 (usable)
[ 0.000000] BIOS-e820: 00000000ca8cb000 - 00000000ca90e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ca90e000 - 00000000cad1d000 (usable)
[ 0.000000] BIOS-e820: 00000000cad1d000 - 00000000caff4000 (reserved)
[ 0.000000] BIOS-e820: 00000000caff4000 - 00000000cb000000 (usable)
[ 0.000000] BIOS-e820: 00000000cbc00000 - 00000000cfe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000012f200000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xca894000 ACPI 2.0=0xca894000 SMBIOS=0xf04c0 MPS=0xfd4c0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037a46000) (376MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037a46000-0x0000000037d1b000) (2MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037d1b000-0x0000000040004000) (130MB)
[ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000008ea0f000) (1258MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000008ea0f000-0x00000000be4b2000) (762MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000be4b2000-0x00000000be7b3000) (3MB)
[ 0.000000] efi: mem19: type=1, attr=0xf, range=[0x00000000be7b3000-0x00000000be7d2000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000be7d2000-0x00000000be7f1000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000be7f1000-0x00000000be808000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000be808000-0x00000000be810000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000be810000-0x00000000be9c4000) (1MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000be9c4000-0x00000000be9ca000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000be9ca000-0x00000000bea2f000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000bea2f000-0x00000000beb59000) (1MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000beb59000-0x00000000beb5b000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000beb5b000-0x00000000bed30000) (1MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000bed30000-0x00000000c8613000) (152MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000c8613000-0x00000000c8617000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000c8617000-0x00000000c90e1000) (10MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000c90e1000-0x00000000c9789000) (6MB)
[ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x00000000c9789000-0x00000000c9794000) (0MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000c9794000-0x00000000c97be000) (0MB)
[ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000c97be000-0x00000000c9dbf000) (6MB)
[ 0.000000] efi: mem36: type=5, attr=0x800000000000000f, range=[0x00000000c9dbf000-0x00000000c9dc2000) (0MB)
[ 0.000000] efi: mem37: type=3, attr=0xf, range=[0x00000000c9dc2000-0x00000000c9dd7000) (0MB)
[ 0.000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000c9dd7000-0x00000000c9ddd000) (0MB)
[ 0.000000] efi: mem39: type=3, attr=0xf, range=[0x00000000c9ddd000-0x00000000c9ddf000) (0MB)
[ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000c9ddf000-0x00000000c9de4000) (0MB)
[ 0.000000] efi: mem41: type=3, attr=0xf, range=[0x00000000c9de4000-0x00000000c9f3d000) (1MB)
[ 0.000000] efi: mem42: type=5, attr=0x800000000000000f, range=[0x00000000c9f3d000-0x00000000c9f41000) (0MB)
[ 0.000000] efi: mem43: type=3, attr=0xf, range=[0x00000000c9f41000-0x00000000c9f8b000) (0MB)
[ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000c9f8b000-0x00000000c9f92000) (0MB)
[ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000c9f92000-0x00000000c9f94000) (0MB)
[ 0.000000] efi: mem46: type=6, attr=0x800000000000000f, range=[0x00000000c9f94000-0x00000000c9fa1000) (0MB)
[ 0.000000] efi: mem47: type=5, attr=0x800000000000000f, range=[0x00000000c9fa1000-0x00000000c9fb2000) (0MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x00000000c9fb2000-0x00000000c9fb5000) (0MB)
[ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x00000000c9fb5000-0x00000000c9fb7000) (0MB)
[ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000c9fb7000-0x00000000c9fce000) (0MB)
[ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000c9fce000-0x00000000c9fd4000) (0MB)
[ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000c9fd4000-0x00000000c9fdc000) (0MB)
[ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000c9fdc000-0x00000000c9fdd000) (0MB)
[ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x00000000c9fdd000-0x00000000c9fec000) (0MB)
[ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000c9fec000-0x00000000c9fed000) (0MB)
[ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x00000000c9fed000-0x00000000c9ff8000) (0MB)
[ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000c9ff8000-0x00000000c9ffd000) (0MB)
[ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x00000000c9ffd000-0x00000000ca01c000) (0MB)
[ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca01c000-0x00000000ca01e000) (0MB)
[ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x00000000ca01e000-0x00000000ca032000) (0MB)
[ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca032000-0x00000000ca033000) (0MB)
[ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x00000000ca033000-0x00000000ca045000) (0MB)
[ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca045000-0x00000000ca06b000) (0MB)
[ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x00000000ca06b000-0x00000000ca07f000) (0MB)
[ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca07f000-0x00000000ca080000) (0MB)
[ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x00000000ca080000-0x00000000ca081000) (0MB)
[ 0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000ca081000-0x00000000ca083000) (0MB)
[ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x00000000ca083000-0x00000000ca084000) (0MB)
[ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000ca084000-0x00000000ca089000) (0MB)
[ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x00000000ca089000-0x00000000ca0a1000) (0MB)
[ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000ca0a1000-0x00000000ca101000) (0MB)
[ 0.000000] efi: mem72: type=5, attr=0x800000000000000f, range=[0x00000000ca101000-0x00000000ca11b000) (0MB)
[ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000ca11b000-0x00000000ca120000) (0MB)
[ 0.000000] efi: mem74: type=6, attr=0x800000000000000f, range=[0x00000000ca120000-0x00000000ca126000) (0MB)
[ 0.000000] efi: mem75: type=6, attr=0x800000000000000f, range=[0x00000000ca126000-0x00000000ca128000) (0MB)
[ 0.000000] efi: mem76: type=6, attr=0x800000000000000f, range=[0x00000000ca128000-0x00000000ca145000) (0MB)
[ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000ca145000-0x00000000ca272000) (1MB)
[ 0.000000] efi: mem78: type=0, attr=0xf, range=[0x00000000ca272000-0x00000000ca5da000) (3MB)
[ 0.000000] efi: mem79: type=0, attr=0xf, range=[0x00000000ca5da000-0x00000000ca5e0000) (0MB)
[ 0.000000] efi: mem80: type=0, attr=0xf, range=[0x00000000ca5e0000-0x00000000ca645000) (0MB)
[ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000ca645000-0x00000000ca702000) (0MB)
[ 0.000000] efi: mem82: type=10, attr=0xf, range=[0x00000000ca702000-0x00000000ca8ad000) (1MB)
[ 0.000000] efi: mem83: type=10, attr=0xf, range=[0x00000000ca8ad000-0x00000000ca8b1000) (0MB)
[ 0.000000] efi: mem84: type=10, attr=0xf, range=[0x00000000ca8b1000-0x00000000ca8c5000) (0MB)
[ 0.000000] efi: mem85: type=9, attr=0xf, range=[0x00000000ca8c5000-0x00000000ca8c9000) (0MB)
[ 0.000000] efi: mem86: type=9, attr=0xf, range=[0x00000000ca8c9000-0x00000000ca8ca000) (0MB)
[ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000ca8ca000-0x00000000ca8cb000) (0MB)
[ 0.000000] efi: mem88: type=10, attr=0xf, range=[0x00000000ca8cb000-0x00000000ca90e000) (0MB)
[ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000ca90e000-0x00000000caa58000) (1MB)
[ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x00000000caa58000-0x00000000cacee000) (2MB)
[ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000cacee000-0x00000000cacf3000) (0MB)
[ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x00000000cacf3000-0x00000000cacf7000) (0MB)
[ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000cacf7000-0x00000000cad04000) (0MB)
[ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x00000000cad04000-0x00000000cad16000) (0MB)
[ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000cad16000-0x00000000cad1d000) (0MB)
[ 0.000000] efi: mem96: type=6, attr=0x800000000000000f, range=[0x00000000cad1d000-0x00000000caff4000) (2MB)
[ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000caff4000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem98: type=7, attr=0xf, range=[0x0000000100000000-0x000000012f200000) (754MB)
[ 0.000000] efi: mem99: type=0, attr=0x8000000000000000, range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
[ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem103: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem104: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem105: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX32VD/UX32VD, BIOS UX32VD.206 06/06/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x12f200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 0CBC00000 mask FFFC00000 uncachable
[ 0.000000] 7 base 12F800000 mask FFF800000 uncachable
[ 0.000000] 8 base 12F400000 mask FFFC00000 uncachable
[ 0.000000] 9 base 12F200000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cbc00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cb000000
[ 0.000000] 0000000000 - 00cb000000 page 2M
[ 0.000000] kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000012f200000
[ 0.000000] 0100000000 - 012f200000 page 2M
[ 0.000000] kernel direct mapping tables up to 12f200000 @ c978e000-c9794000
[ 0.000000] RAMDISK: 37a46000 - 37d1b000
[ 0.000000] ACPI: RSDP 00000000ca894000 00024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 00000000ca894088 00094 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000ca8a83b8 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000ca8941b8 141FA (v02 _ASUS_ Notebook 00000013 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000ca8c2f80 00040
[ 0.000000] ACPI: APIC 00000000ca8a84b0 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000ca8a8528 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 00000000ca8a8570 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 00000000ca8a8638 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000ca8a8678 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ca8a90b8 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ca8a9d60 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ca8a9df8 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000ca8aa718 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.000000] ACPI: HPET 00000000ca8aa890 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000ca8aa8c8 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000ca8ab150 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000ca8abbe8 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000012f200000
[ 0.000000] Initmem setup node 0 0000000000000000-000000012f200000
[ 0.000000] NODE_DATA [000000012f1fc000 - 000000012f1fffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012a800000-ffff88012e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0012f200
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040004
[ 0.000000] 0: 0x00040005 -> 0x000c97be
[ 0.000000] 0: 0x000c9dc2 -> 0x000c9dd7
[ 0.000000] 0: 0x000c9ddd -> 0x000c9ddf
[ 0.000000] 0: 0x000c9de4 -> 0x000c9f3d
[ 0.000000] 0: 0x000c9f41 -> 0x000c9f8b
[ 0.000000] 0: 0x000c9f92 -> 0x000c9f94
[ 0.000000] 0: 0x000c9fb2 -> 0x000c9fb5
[ 0.000000] 0: 0x000c9fb7 -> 0x000c9fce
[ 0.000000] 0: 0x000c9fd4 -> 0x000c9fdc
[ 0.000000] 0: 0x000c9fdd -> 0x000c9fec
[ 0.000000] 0: 0x000c9fed -> 0x000c9ff8
[ 0.000000] 0: 0x000c9ffd -> 0x000ca01c
[ 0.000000] 0: 0x000ca01e -> 0x000ca032
[ 0.000000] 0: 0x000ca033 -> 0x000ca045
[ 0.000000] 0: 0x000ca06b -> 0x000ca07f
[ 0.000000] 0: 0x000ca080 -> 0x000ca081
[ 0.000000] 0: 0x000ca083 -> 0x000ca084
[ 0.000000] 0: 0x000ca089 -> 0x000ca0a1
[ 0.000000] 0: 0x000ca8ca -> 0x000ca8cb
[ 0.000000] 0: 0x000ca90e -> 0x000cad1d
[ 0.000000] 0: 0x000caff4 -> 0x000cb000
[ 0.000000] 0: 0x00100000 -> 0x0012f200
[ 0.000000] On node 0 totalpages: 1019347
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 11 pages reserved
[ 0.000000] DMA zone: 3908 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 806020 pages, LIFO batch:31
[ 0.000000] Normal zone: 3016 pages used for memmap
[ 0.000000] Normal zone: 190008 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000c97be000 - 00000000c9dbf000
[ 0.000000] PM: Registered nosave memory: 00000000c9dbf000 - 00000000c9dc2000
[ 0.000000] PM: Registered nosave memory: 00000000c9dd7000 - 00000000c9ddd000
[ 0.000000] PM: Registered nosave memory: 00000000c9ddf000 - 00000000c9de4000
[ 0.000000] PM: Registered nosave memory: 00000000c9f3d000 - 00000000c9f41000
[ 0.000000] PM: Registered nosave memory: 00000000c9f8b000 - 00000000c9f92000
[ 0.000000] PM: Registered nosave memory: 00000000c9f94000 - 00000000c9fb2000
[ 0.000000] PM: Registered nosave memory: 00000000c9fb5000 - 00000000c9fb7000
[ 0.000000] PM: Registered nosave memory: 00000000c9fce000 - 00000000c9fd4000
[ 0.000000] PM: Registered nosave memory: 00000000c9fdc000 - 00000000c9fdd000
[ 0.000000] PM: Registered nosave memory: 00000000c9fec000 - 00000000c9fed000
[ 0.000000] PM: Registered nosave memory: 00000000c9ff8000 - 00000000c9ffd000
[ 0.000000] PM: Registered nosave memory: 00000000ca01c000 - 00000000ca01e000
[ 0.000000] PM: Registered nosave memory: 00000000ca032000 - 00000000ca033000
[ 0.000000] PM: Registered nosave memory: 00000000ca045000 - 00000000ca06b000
[ 0.000000] PM: Registered nosave memory: 00000000ca07f000 - 00000000ca080000
[ 0.000000] PM: Registered nosave memory: 00000000ca081000 - 00000000ca083000
[ 0.000000] PM: Registered nosave memory: 00000000ca084000 - 00000000ca089000
[ 0.000000] PM: Registered nosave memory: 00000000ca0a1000 - 00000000ca645000
[ 0.000000] PM: Registered nosave memory: 00000000ca645000 - 00000000ca8c5000
[ 0.000000] PM: Registered nosave memory: 00000000ca8c5000 - 00000000ca8ca000
[ 0.000000] PM: Registered nosave memory: 00000000ca8cb000 - 00000000ca90e000
[ 0.000000] PM: Registered nosave memory: 00000000cad1d000 - 00000000caff4000
[ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cbc00000
[ 0.000000] PM: Registered nosave memory: 00000000cbc00000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:28200000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012ee00000 s82880 r8192 d23616 u524288
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999936
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3751436k/4966400k available (4538k kernel code, 889012k absent, 325952k reserved, 4307k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 1696.208 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.76 BogoMIPS (lpj=5654026)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000028] init_memory_mapping: 00000000cbc00000-00000000cfe00000
[ 0.000032] 00cbc00000 - 00cfe00000 page 2M
[ 0.151118] Security Framework initialized
[ 0.151124] AppArmor: AppArmor disabled by boot time parameter
[ 0.151478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.153001] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.153673] Mount-cache hash table entries: 256
[ 0.153885] Initializing cgroup subsys cpuacct
[ 0.153888] Initializing cgroup subsys memory
[ 0.153897] Initializing cgroup subsys devices
[ 0.153899] Initializing cgroup subsys freezer
[ 0.153901] Initializing cgroup subsys net_cls
[ 0.153903] Initializing cgroup subsys blkio
[ 0.153938] CPU: Physical Processor ID: 0
[ 0.153940] CPU: Processor Core ID: 0
[ 0.153946] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.153947] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.154505] mce: CPU supports 7 MCE banks
[ 0.154520] CPU0: Thermal monitoring enabled (TM1)
[ 0.154528] using mwait in idle threads.
[ 0.155909] ACPI: Core revision 20120320
[ 0.173638] ftrace: allocating 17828 entries in 70 pages
[ 0.187014] DMAR: Host address width 36
[ 0.187017] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.187030] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.187033] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.187044] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.187046] DMAR: RMRR base: 0x000000ca395000 end: 0x000000ca3b1fff
[ 0.187049] DMAR: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
[ 0.187125] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.187127] HPET id 0 under DRHD base 0xfed91000
[ 0.187335] Enabled IRQ remapping in x2apic mode
[ 0.187337] Enabling x2apic
[ 0.187339] Enabled x2apic
[ 0.187348] Switched APIC routing to cluster x2apic.
[ 0.187829] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.220796] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
[ 0.325329] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[ 0.325337] ... version: 3
[ 0.325338] ... bit width: 48
[ 0.325340] ... generic registers: 4
[ 0.325342] ... value mask: 0000ffffffffffff
[ 0.325343] ... max period: 000000007fffffff
[ 0.325345] ... fixed-purpose events: 3
[ 0.325347] ... event mask: 000000070000000f
[ 0.345395] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.365318] Booting Node 0, Processors #1
[ 0.379062] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.391966] #2
[ 0.405760] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.418597] #3 Ok.
[ 0.432328] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.432363] Brought up 4 CPUs
[ 0.432366] Total of 4 processors activated (13575.06 BogoMIPS).
[ 0.436881] devtmpfs: initialized
[ 0.438137] PM: Registering ACPI NVS region [mem 0xc97be000-0xc9dbefff] (6295552 bytes)
[ 0.438244] PM: Registering ACPI NVS region [mem 0xca645000-0xca8c4fff] (2621440 bytes)
[ 0.438288] PM: Registering ACPI NVS region [mem 0xca8cb000-0xca90dfff] (274432 bytes)
[ 0.439159] NET: Registered protocol family 16
[ 0.439285] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.439288] ACPI: bus type pci registered
[ 0.439359] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.439363] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.488790] PCI: Using configuration type 1 for base access
[ 0.489423] bio: create slab <bio-0> at 0
[ 0.489488] ACPI: Added _OSI(Module Device)
[ 0.489490] ACPI: Added _OSI(Processor Device)
[ 0.489492] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.489494] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.492750] ACPI: EC: EC description table is found, configuring boot EC
[ 0.496137] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.598886] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.599592] ACPI: SSDT 00000000ca5f2018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.600414] ACPI: Dynamic OEM Table Load:
[ 0.600417] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.600767] ACPI: SSDT 00000000ca5f3a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.601622] ACPI: Dynamic OEM Table Load:
[ 0.601626] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.601797] ACPI: SSDT 00000000ca5f4c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.602615] ACPI: Dynamic OEM Table Load:
[ 0.602618] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.603483] ACPI: Interpreter enabled
[ 0.603488] ACPI: (supports S0 S3 S4 S5)
[ 0.603522] ACPI: Using IOAPIC for interrupt routing
[ 0.709320] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.709614] ACPI: No dock devices found.
[ 0.709618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.710040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.710623] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.710626] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.710629] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.710632] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.710634] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.710637] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.710639] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.710643] pci_root PNP0A08:00: host bridge window [mem 0xcfe00000-0xfeafffff]
[ 0.710683] PCI host bridge to bus 0000:00
[ 0.710686] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.710688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.710691] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.710693] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.710696] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.710698] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.710701] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.710703] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
[ 0.710714] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.710765] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.710808] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.710842] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.710857] pci 0000:00:02.0: reg 10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.710866] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.710873] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.710919] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.710933] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.711023] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.711053] pci 0000:00:14.0: reg 10: [mem 0xf7900000-0xf790ffff 64bit]
[ 0.711145] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.711176] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.711206] pci 0000:00:16.0: reg 10: [mem 0xf7922000-0xf792200f 64bit]
[ 0.711301] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.711353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.711380] pci 0000:00:1a.0: reg 10: [mem 0xf7920000-0xf79203ff]
[ 0.711490] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.711525] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.711543] pci 0000:00:1b.0: reg 10: [mem 0xf7918000-0xf791bfff 64bit]
[ 0.711626] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.711657] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.711790] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.711831] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.711963] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.712027] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.712052] pci 0000:00:1d.0: reg 10: [mem 0xf791f000-0xf791f3ff]
[ 0.712164] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.712196] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.712346] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.712370] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 0.712380] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 0.712391] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 0.712400] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 0.712410] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.712421] pci 0000:00:1f.2: reg 24: [mem 0xf791e000-0xf791e7ff]
[ 0.712480] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.712505] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.712526] pci 0000:00:1f.3: reg 10: [mem 0xf791d000-0xf791d0ff 64bit]
[ 0.712556] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.712601] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.712629] pci 0000:00:1f.6: reg 10: [mem 0xf791c000-0xf791cfff 64bit]
[ 0.712761] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[ 0.712778] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.712796] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.712814] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.712826] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.712839] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
[ 0.718669] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.718673] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.718677] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.718681] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.718759] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.719023] pci 0000:03:00.0: [8086:088e] type 00 class 0x028000
[ 0.719239] pci 0000:03:00.0: reg 10: [mem 0xf7800000-0xf7801fff 64bit]
[ 0.720103] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.725437] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.725447] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.725477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.725613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.725684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.725749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.725903] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.726168] pci0000:00: ACPI _OSC control (0x18) granted
[ 1.474997] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 1.475053] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
[ 1.475105] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
[ 1.475156] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[ 1.475207] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.475258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.475309] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[ 1.475359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 1.475453] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.475460] vgaarb: loaded
[ 1.475461] vgaarb: bridge control possible 0000:00:02.0
[ 1.475508] PCI: Using ACPI for IRQ routing
[ 1.477328] PCI: pci_cache_line_size set to 64 bytes
[ 1.477339] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
[ 1.477421] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 1.477423] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
[ 1.477426] reserve RAM buffer: 00000000c97be000 - 00000000cbffffff
[ 1.477439] reserve RAM buffer: 00000000c9dd7000 - 00000000cbffffff
[ 1.477451] reserve RAM buffer: 00000000c9ddf000 - 00000000cbffffff
[ 1.477462] reserve RAM buffer: 00000000c9f3d000 - 00000000cbffffff
[ 1.477473] reserve RAM buffer: 00000000c9f8b000 - 00000000cbffffff
[ 1.477484] reserve RAM buffer: 00000000c9f94000 - 00000000cbffffff
[ 1.477494] reserve RAM buffer: 00000000c9fb5000 - 00000000cbffffff
[ 1.477504] reserve RAM buffer: 00000000c9fce000 - 00000000cbffffff
[ 1.477514] reserve RAM buffer: 00000000c9fdc000 - 00000000cbffffff
[ 1.477523] reserve RAM buffer: 00000000c9fec000 - 00000000cbffffff
[ 1.477532] reserve RAM buffer: 00000000c9ff8000 - 00000000cbffffff
[ 1.477540] reserve RAM buffer: 00000000ca01c000 - 00000000cbffffff
[ 1.477548] reserve RAM buffer: 00000000ca032000 - 00000000cbffffff
[ 1.477556] reserve RAM buffer: 00000000ca045000 - 00000000cbffffff
[ 1.477563] reserve RAM buffer: 00000000ca07f000 - 00000000cbffffff
[ 1.477569] reserve RAM buffer: 00000000ca081000 - 00000000cbffffff
[ 1.477575] reserve RAM buffer: 00000000ca084000 - 00000000cbffffff
[ 1.477581] reserve RAM buffer: 00000000ca0a1000 - 00000000cbffffff
[ 1.477586] reserve RAM buffer: 00000000ca8cb000 - 00000000cbffffff
[ 1.477590] reserve RAM buffer: 00000000cad1d000 - 00000000cbffffff
[ 1.477593] reserve RAM buffer: 00000000cb000000 - 00000000cbffffff
[ 1.477596] reserve RAM buffer: 000000012f200000 - 000000012fffffff
[ 1.477696] NetLabel: Initializing
[ 1.477698] NetLabel: domain hash size = 128
[ 1.477699] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.477713] NetLabel: unlabeled traffic allowed by default
[ 1.477738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.477746] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.479760] Switching to clocksource hpet
[ 1.485853] pnp: PnP ACPI init
[ 1.485869] ACPI: bus type pnp registered
[ 1.486219] pnp 00:00: [bus 00-3e]
[ 1.486224] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.486226] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.486229] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.486231] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.486234] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.486236] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.486238] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.486241] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.486243] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.486246] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.486248] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.486250] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.486253] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.486255] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.486257] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.486260] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.486262] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.486264] pnp 00:00: [mem 0xcfe00000-0xfeafffff window]
[ 1.486267] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 1.486345] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.486376] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 1.486418] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.486422] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.533253] pnp 00:02: [io 0x0000-0x001f]
[ 1.533255] pnp 00:02: [io 0x0081-0x0091]
[ 1.533257] pnp 00:02: [io 0x0093-0x009f]
[ 1.533259] pnp 00:02: [io 0x00c0-0x00df]
[ 1.533262] pnp 00:02: [dma 4]
[ 1.533297] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.533306] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 1.533336] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.533438] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 1.533473] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.533487] pnp 00:05: [io 0x002e-0x002f]
[ 1.533489] pnp 00:05: [io 0x004e-0x004f]
[ 1.533491] pnp 00:05: [io 0x0061]
[ 1.533493] pnp 00:05: [io 0x0063]
[ 1.533495] pnp 00:05: [io 0x0065]
[ 1.533497] pnp 00:05: [io 0x0067]
[ 1.533498] pnp 00:05: [io 0x0070]
[ 1.533500] pnp 00:05: [io 0x0080]
[ 1.533502] pnp 00:05: [io 0x0092]
[ 1.533504] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.533506] pnp 00:05: [io 0x0680-0x069f]
[ 1.533508] pnp 00:05: [io 0x0200-0x020f]
[ 1.533510] pnp 00:05: [io 0xffff]
[ 1.533512] pnp 00:05: [io 0xffff]
[ 1.533514] pnp 00:05: [io 0x0400-0x0453]
[ 1.533518] pnp 00:05: [io 0x0458-0x047f]
[ 1.533520] pnp 00:05: [io 0x0500-0x057f]
[ 1.533522] pnp 00:05: [io 0x164e-0x164f]
[ 1.533573] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.533576] system 00:05: [io 0x0200-0x020f] has been reserved
[ 1.533579] system 00:05: [io 0xffff] has been reserved
[ 1.533581] system 00:05: [io 0xffff] has been reserved
[ 1.533584] system 00:05: [io 0x0400-0x0453] has been reserved
[ 1.533587] system 00:05: [io 0x0458-0x047f] has been reserved
[ 1.533590] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.533592] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.533596] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.533606] pnp 00:06: [io 0x0070-0x0077]
[ 1.533620] pnp 00:06: [irq 8]
[ 1.533653] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.533685] pnp 00:07: [io 0x0454-0x0457]
[ 1.533733] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.533737] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.533764] pnp 00:08: [io 0x0010-0x001f]
[ 1.533767] pnp 00:08: [io 0x0022-0x003f]
[ 1.533769] pnp 00:08: [io 0x0044-0x005f]
[ 1.533771] pnp 00:08: [io 0x0072-0x007f]
[ 1.533773] pnp 00:08: [io 0x0080]
[ 1.533774] pnp 00:08: [io 0x0084-0x0086]
[ 1.533776] pnp 00:08: [io 0x0088]
[ 1.533778] pnp 00:08: [io 0x008c-0x008e]
[ 1.533780] pnp 00:08: [io 0x0090-0x009f]
[ 1.533782] pnp 00:08: [io 0x00a2-0x00bf]
[ 1.533784] pnp 00:08: [io 0x00e0-0x00ef]
[ 1.533786] pnp 00:08: [io 0x04d0-0x04d1]
[ 1.533836] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.533840] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.533849] pnp 00:09: [io 0x00f0-0x00ff]
[ 1.533858] pnp 00:09: [irq 13]
[ 1.533892] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.533945] pnp 00:0a: [irq 12]
[ 1.533982] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 1.534008] pnp 00:0b: [io 0x0060]
[ 1.534010] pnp 00:0b: [io 0x0064]
[ 1.534017] pnp 00:0b: [irq 1]
[ 1.534053] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.534293] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 1.534295] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
[ 1.534297] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
[ 1.534300] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
[ 1.534302] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
[ 1.534304] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[ 1.534306] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
[ 1.534308] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
[ 1.534310] pnp 00:0c: [mem 0xff000000-0xffffffff]
[ 1.534313] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
[ 1.534315] pnp 00:0c: [mem 0xcfe00000-0xcfe00fff]
[ 1.534382] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.534385] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.534388] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.534392] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.534395] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.534398] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.534401] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.534404] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.534407] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 1.534413] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.534416] system 00:0c: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 1.534420] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.534494] pnp 00:0d: [mem 0xcfe00000-0xcfe00fff]
[ 1.534558] system 00:0d: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 1.534562] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.534715] pnp 00:0e: [mem 0x20000000-0x201fffff]
[ 1.534718] pnp 00:0e: [mem 0x40004000-0x40004fff]
[ 1.534783] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
[ 1.534786] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
[ 1.534790] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.534823] pnp: PnP ACPI: found 15 devices
[ 1.534824] ACPI: ACPI bus type pnp unregistered
[ 1.541624] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfe08000-0xcfe0ffff 64bit]
[ 1.541631] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.541634] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 1.541638] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.541642] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 1.541647] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.541662] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.541670] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 1.541716] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.541719] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.541721] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.541724] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.541727] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.541729] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.541732] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.541734] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
[ 1.541737] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.541739] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 1.541742] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 1.541745] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 1.541791] NET: Registered protocol family 2
[ 1.541920] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.542713] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.544194] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.544343] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.544346] TCP: reno registered
[ 1.544359] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.544378] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.544464] NET: Registered protocol family 1
[ 1.544482] pci 0000:00:02.0: Boot video device
[ 1.579823] PCI: CLS 64 bytes, default 64
[ 1.579868] Unpacking initramfs...
[ 1.651952] Freeing initrd memory: 2900k freed
[ 1.652345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.652349] Placing 64MB software IO TLB between ffff8800ba4b2000 - ffff8800be4b2000
[ 1.652351] software IO TLB at phys 0xba4b2000 - 0xbe4b2000
[ 1.652909] audit: initializing netlink socket (disabled)
[ 1.652920] type=2000 audit(1343310419.543:1): initialized
[ 1.653295] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.655215] VFS: Disk quotas dquot_6.5.2
[ 1.655264] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.655387] msgmni has been set to 7683
[ 1.655586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.655616] io scheduler noop registered
[ 1.655619] io scheduler deadline registered
[ 1.655674] io scheduler cfq registered (default)
[ 1.655790] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 1.656047] efifb: probing for efifb
[ 1.658527] efifb: framebuffer at 0xd0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
[ 1.658530] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.658532] efifb: scrolling: redraw
[ 1.658534] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.661755] Console: switching to colour frame buffer device 128x48
[ 1.664865] fb0: EFI VGA frame buffer device
[ 1.664872] intel_idle: does not run on family 6 model 58
[ 1.664905] GHES: HEST is not enabled!
[ 1.664976] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.665554] Linux agpgart interface v0.103
[ 1.665643] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.667162] i8042: Detected active multiplexing controller, rev 1.1
[ 1.668312] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.668346] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.668370] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.668392] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.668415] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.668518] mousedev: PS/2 mouse device common for all mice
[ 1.668581] rtc_cmos 00:06: RTC can wake from S4
[ 1.668727] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.668756] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.668766] cpuidle: using governor ladder
[ 1.668768] cpuidle: using governor menu
[ 1.668897] TCP: cubic registered
[ 1.669011] NET: Registered protocol family 10
[ 1.669206] NET: Registered protocol family 17
[ 1.669210] Registering the dns_resolver key type
[ 1.669345] PM: Hibernation image not present or could not be loaded.
[ 1.669352] registered taskstats version 1
[ 1.669923] rtc_cmos 00:06: setting system clock to 2012-07-26 13:47:00 UTC (1343310420)
[ 1.670074] Initializing network drop monitor service
[ 1.671692] Freeing unused kernel memory: 740k freed
[ 1.671810] Write protecting the kernel read-only data: 8192k
[ 1.677537] Freeing unused kernel memory: 1588k freed
[ 1.680114] Freeing unused kernel memory: 640k freed
[ 1.688393] systemd-udevd[48]: starting version 186
[ 1.702336] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.729878] usbcore: registered new interface driver usbfs
[ 1.729905] usbcore: registered new interface driver hub
[ 1.729967] usbcore: registered new device driver usb
[ 1.730626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.730703] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.730709] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.730735] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.730768] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.733581] SCSI subsystem initialized
[ 1.734651] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.734672] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7920000
[ 1.735298] libata version 3.00 loaded.
[ 1.742916] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.743591] hub 1-0:1.0: USB hub found
[ 1.743601] hub 1-0:1.0: 2 ports detected
[ 1.743896] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.743903] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.743919] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.743958] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.747853] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.747877] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf791f000
[ 1.756260] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.756431] hub 2-0:1.0: USB hub found
[ 1.756436] hub 2-0:1.0: 2 ports detected
[ 1.756777] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.756784] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.756817] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.756946] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.756957] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7900000
[ 1.757034] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 1.757594] xHCI xhci_add_endpoint called for root hub
[ 1.757598] xHCI xhci_check_bandwidth called for root hub
[ 1.757646] hub 3-0:1.0: USB hub found
[ 1.757657] hub 3-0:1.0: 4 ports detected
[ 1.757744] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.757751] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.757848] xHCI xhci_add_endpoint called for root hub
[ 1.757851] xHCI xhci_check_bandwidth called for root hub
[ 1.757894] hub 4-0:1.0: USB hub found
[ 1.757905] hub 4-0:1.0: 4 ports detected
[ 1.759643] ahci 0000:00:1f.2: version 3.0
[ 1.759745] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.759829] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 1.759836] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.759845] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.766833] scsi0 : ahci
[ 1.766937] scsi1 : ahci
[ 1.767022] scsi2 : ahci
[ 1.767101] scsi3 : ahci
[ 1.767184] scsi4 : ahci
[ 1.767262] scsi5 : ahci
[ 1.767498] ata1: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e100 irq 44
[ 1.767503] ata2: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e180 irq 44
[ 1.767505] ata3: DUMMY
[ 1.767507] ata4: DUMMY
[ 1.767508] ata5: DUMMY
[ 1.767510] ata6: DUMMY
[ 2.049225] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.085851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.085878] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.086220] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.086306] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.086310] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.086526] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.086607] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.086610] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.086623] ata2.00: ATA-9: SanDisk SSD i100 32GB, 11.50.00, max UDMA/133
[ 2.086626] ata2.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.087041] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.087128] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.087131] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.087143] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[ 2.087146] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.087320] ata2.00: configured for UDMA/133
[ 2.087589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.087650] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.087669] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.087920] ata1.00: configured for UDMA/133
[ 2.088043] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
[ 2.088297] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD i100 11.5 PQ: 0 ANSI: 5
[ 2.093498] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.093608] sd 0:0:0:0: [sda] Write Protect is off
[ 2.093612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.093648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.093819] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.093913] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.093919] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.093951] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.095497] sda: sda1 sda2
[ 2.095893] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.096681] sdb: sdb1 sdb2 sdb3
[ 2.096999] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.173153] hub 1-1:1.0: USB hub found
[ 2.173332] hub 1-1:1.0: 6 ports detected
[ 2.227030] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.332228] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 2.359348] usb 3-3: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 2.359354] usb 3-3: ep 0x3 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 2.415509] systemd-udevd[144]: starting version 186
[ 2.465386] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.465658] [drm] Initialized drm 1.1.0 20060810
[ 2.468971] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 2.482290] ACPI: Lid Switch [LID]
[ 2.483112] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.483119] ACPI: Power Button [PWRB]
[ 2.484540] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.484548] ACPI: Sleep Button [SLPB]
[ 2.488074] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 2.488698] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.491571] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 2.491779] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.494298] ACPI: Requesting acpi_cpufreq
[ 2.507995] i915 0000:00:02.0: setting latency timer to 64
[ 2.530014] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.530018] ACPI: Thermal Zone [THRM] (52 C)
[ 2.530047] ACPI: AC Adapter [AC0] (on-line)
[ 2.532019] Monitor-Mwait will be used to enter C-1 state
[ 2.532089] Monitor-Mwait will be used to enter C-2 state
[ 2.532122] ACPI: acpi_idle registered with cpuidle
[ 2.555771] ACPI: Battery Slot [BAT0] (battery present)
[ 2.561573] wmi: Mapper loaded
[ 2.564667] iTCO_vendor_support: vendor-support=0
[ 2.565251] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.568922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.569169] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.569279] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.584441] cfg80211: Calling CRDA to update world regulatory domain
[ 2.587955] MXM: GUID detected in BIOS
[ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
[ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120Sometimes with Intel driver I can see mouse while loading gdm, but then it goes to black.
I tried to boot with Intel driver with "drm.debug=14" and "log_buf_len=16M" as boot parameters. There is debug log from gdm, it seems to have some errors, I have not yet looked deeble on it:
gnome-session[1269]: DEBUG(+): Enabling debugging
gnome-session[1269]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/Louis-laptop:@/tmp/.ICE-unix/1269,unix/Louis-laptop:/tmp/.ICE-unix/1269
gnome-session[1269]: DEBUG(+): GsmShell: Not connected to the shell
gnome-session[1269]: DEBUG(+): GsmManager: setting client store 0xe4e070
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
gnome-session[1269]: DEBUG(+): fill: *** Getting session 'gdm-shell'
gnome-session[1269]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/local/share/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/usr/local/share/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
gnome-session[1269]: DEBUG(+): fill: *** Checking required components and providers
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): fill: *** Done checking required components and providers
gnome-session[1269]: DEBUG(+): fill: *** Adding required components
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
gnome-session[1269]: DEBUG(+): fill: *** Done adding required components
gnome-session[1269]: DEBUG(+): fill: *** Adding default providers
gnome-session[1269]: DEBUG(+): fill: *** Done adding default providers
gnome-session[1269]: DEBUG(+): GsmManager: GSM starting to manage
gnome-session[1269]: DEBUG(+): GsmManager: App startup summary
gnome-session[1269]: DEBUG(+): GsmManager: Phase INITIALIZATION
gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
gnome-session[1269]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
gnome-session[1269]: DEBUG(+): GsmManager: Phase PANEL
gnome-session[1269]: DEBUG(+): GsmManager: Phase DESKTOP
gnome-session[1269]: DEBUG(+): GsmManager: Phase APPLICATION
gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
gnome-session[1269]: DEBUG(+): GsmManager: starting phase INITIALIZATION
gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10bba787d7390cc455134324418397061300000012690001
gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1279
gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient
gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418445168000000012690002 to session
gnome-session[1269]: DEBUG(+): uid = 120
gnome-session[1269]: DEBUG(+): pid = 1360
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient 10bba787d7390cc455134324418397061300000012690001
gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418397061300000012690001 to session
gnome-session[1269]: DEBUG(+): uid = 120
gnome-session[1269]: DEBUG(+): pid = 1279
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): App gnome-settings-daemon.desktop registered
gnome-session[1269]: DEBUG(+): GsmManager: ending phase INITIALIZATION
gnome-session[1269]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
gnome-session[1269]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
gnome-session[1269]: DEBUG(+): GsmManager: starting phase PANEL
gnome-session[1269]: DEBUG(+): GsmManager: ending phase PANEL
gnome-session[1269]: DEBUG(+): GsmManager: starting phase DESKTOP
gnome-session[1269]: DEBUG(+): GsmManager: ending phase DESKTOP
gnome-session[1269]: DEBUG(+): GsmManager: starting phase APPLICATION
gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10bba787d7390cc455134324418396973400000012690000
gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1369
gnome-session[1269]: DEBUG(+): GsmManager: ending phase APPLICATION
gnome-session[1269]: DEBUG(+): GsmManager: starting phase RUNNING
gnome-session[1269]: DEBUG(+): GsmPresence: adding idle watch
gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
gnome-session[1269]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Setting up new connection
gnome-session[1269]: DEBUG(+): GsmXSMPClient: New client '0xe99030 []'
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Initializing client 0xe99030 []
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 []' received RegisterClient(10bba787d7390cc455134324418396973400000012690000)
gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418396973400000012690000 to session
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Set properties from client '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
gnome-session[1269]: DEBUG(+): GsmXSMPClient: ProcessID = '1369'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GdmSignalHandler: handling signal 15
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
gnome-session[1269]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
gnome-session[1269]: DEBUG(+): Got callback for signal 15
gnome-session[1269]: DEBUG(+): GsmManager: Logout called
gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1269]: DEBUG(+): GsmManager: requesting logout
gnome-session[1269]: DEBUG(+): GsmManager: ending phase RUNNING
gnome-session[1269]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): Caught signal 15, shutting down normally.
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Done handling signals
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, 9, 32771, 0)
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmManager: query end session complete
gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1269]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
gnome-session[1269]: DEBUG(+): GsmManager: starting phase END_SESSION
gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, c, 32771, 0)
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmManager: ending phase END_SESSION
gnome-session[1269]: DEBUG(+): Using ConsoleKit for session tracking
gnome-session[1269]: DEBUG(+): GsmManager: starting phase EXIT
gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]')
gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received CloseConnection
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe99030
gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000])
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
gnome-session[1269]: DEBUG(+): GsmManager: unable to find application for client - not restarting
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe7ff30
gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe9b020
gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: last client disconnected - exiting
gnome-session[1269]: DEBUG(+): GsmManager: ending phase EXIT
gnome-session[1269]: DEBUG(+): Unreffing manager
gnome-session[1269]: DEBUG(+): GsmManager: disposing manager
gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece830
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece910
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
(gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
PolicyKit daemon disconnected from the bus.
We are no longer a registered authentication agent.
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Window manager warning: Log level 16: gnome-shell: Fatal IO error 0 (Success) on X server :0. -
Intel iMac will not boot past gray screen
Intel iMac will not boot past gray screen
my system:
new (month old) 24" intel imac, 2.8 ghz, 4 gb ram.
running: leopard (upgraded from tiger, which was pre-installed at purchase), installed 10.5.1 update right before this huge problem occurred.
install discs on-hand: two-disc tiget set, single leopard upgrade disc.
what led to this:
i wanted to install windows using bootcamp on a 50 gb partition.
at this point i was running leopard 10.5
i followed all bootcamp instructions, printing out the guide, as well. once i got into the windows setup, i was prompted to choose a partition to install windows. unlike the bootcamp guide, which showed three partitions, one clearly labeled "bootcamp", i saw only one partition. not wanting to risk writing over my mac partition, i quit the setup and rebooted the mac os. after some googling around, i looked for firmware updates (didn't need any), and then software updates. i decided to try updating to 10.5.1.
i then ran through boot camp again, deleting my previous windows partition, creating a new one, and moving forward as before. once again, i was only shown one partition to choose from in the windows setup. i exited the setup again to reboot through the mac os, but this time, i was only given a blank gray screen.
here's what i have tried so far:
booting from a CD, holding down the C or D keys: no response (in fact, i have to restart the computer holding down the mouse button to be able to eject the CD)
booting with option key held down: gray screen
booting with option key held down with external bootable firewire drive attached: the firewire drive appears as a boot icon, and i can click on it within a five second window, but then the screen freezes after that time period, and nothing changes
booting into target mode while attached to another mac: gray screen (no firewire icon, and drive never shows up on other mac)
resetting NVRAM: i'm able to hear the boot chimes, but no difference in performance. gray screen every time
Safe boot: nothing but a gray screen
Verbose mode: gray screen
Single user mode: gray screen
Single user mode with firewire drive attached: occasionally (not every time), i am able to get the white on black terminal to show up. from here, i'm able to run fsck, but it appears to only be checking the firewire drive. i have tried several times to boot from here, and once it took me to a blue screen with movable arrow cursor, but it never went beyond this.
is there anything else left to try before taking it to apple?
any help would be greatly appreciated.
thanks,
Casey Burns
Casey Burns Illustration and Design
http://CaseyBurns.comI'd call Apple support at this point. You'll need
to put this issue on the record.
Call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
The wait may be long for an agent to come on the line
so expect that and have some other stuff to do in the meantime.
If you have the applecare protection plan, I'd ask about "onsite"
service.
I like your work ! Good luck !
Slim
Message was edited by: slimpikkunz -
Cloned drive reads as MS-DOS even though formatted as Mac OS Extended (Journaled)
Question: How can I get my friend's MacBook 5,1 to properly boot from a cloned drive?
I have a friend with a MacBook 5,1 and I'm trying to help her to install a new hard drive. I followed the instructions here using Apple Disk Utility to clone the hard drive. For cloning, I had the original drive in the laptop and the clone was attached via an external SATA to USB adapter. The specs on the drive are here:
WD Scorpio Black 500 GB SATA Hard Drives ( WD5000BPKT)
After I cloned the drive I set it to boot, externally, on startup and was successful. I placed a test file in the Desktop folder of the cloned drive and confirmed on startup that I was indeed booting off the clone. The problem occurred when I attempted to install and then boot the drive from within the laptop. I received a blinking folder with a question mark. I then attached the old drive via the SATA to USB adapter, booted up, and opened Disk Utility (note: click image to see full size):
Note the partion size, name, and size are nothing like what I originally saw. So I swapped the old drive back in, attached the clone externally and had a look to see what Disk Utility showed (note: click image to see full size):
Summary of differences:
Feature
Internally
Externally
Volume Name
DISK0S1
Macintosh HD
Format
MS-DOS (FAT)
Mac OS Extneded (Journaled)
Size
62.51 GB
499.76 GB
Partition Map Scheme
Master Boot Record
GUID Partition Table
So for some reason the drive shows one partion scheme/size/name when mounted externally, and another completely different set when mounted internally. I'm inclined to believe the second since I did successfully boot from this drive externally.
Is it possible I just need to clear the Master Boot Record? Or is there some other solution that should work?
Finally, here's the Disk Utility log:
2012-03-13 16:23:01 -0700: Disk Utility started.
2012-03-13 16:26:05 -0700: Preparing to erase : “FreeAgent G”
2012-03-13 16:26:05 -0700: Partition Scheme: Master Boot Record
2012-03-13 16:26:05 -0700: 1 volume will be erased
2012-03-13 16:26:05 -0700: Name : “FreeAgent G”
2012-03-13 16:26:05 -0700: Size : 500.11 GB
2012-03-13 16:26:05 -0700: Filesystem : Mac OS Extended (Journaled)
2012-03-13 16:26:05 -0700: Unmounting disk
2012-03-13 16:26:10 -0700: Volume Erase failed with the error:
Could not unmount disk
2012-03-13 16:26:10 -0700: Erase complete.
2012-03-13 16:26:10 -0700:
2012-03-13 16:26:33 -0700: Preparing to erase : “FreeAgent G”
2012-03-13 16:26:33 -0700: Partition Scheme: Master Boot Record
2012-03-13 16:26:33 -0700: 1 volume will be erased
2012-03-13 16:26:33 -0700: Name : “FreeAgent G”
2012-03-13 16:26:33 -0700: Size : 500.11 GB
2012-03-13 16:26:33 -0700: Filesystem : Mac OS Extended (Journaled)
2012-03-13 16:26:33 -0700: Unmounting disk
2012-03-13 16:26:35 -0700: Volume Erase failed with the error:
Could not unmount disk
2012-03-13 16:26:35 -0700: Erase complete.
2012-03-13 16:26:35 -0700:
2012-03-13 16:27:02 -0700: Preparing to erase : “FreeAgent G”
2012-03-13 16:27:02 -0700: Partition Scheme: Master Boot Record
2012-03-13 16:27:02 -0700: 1 volume will be erased
2012-03-13 16:27:02 -0700: Name : “FreeAgent G”
2012-03-13 16:27:02 -0700: Size : 500.11 GB
2012-03-13 16:27:02 -0700: Filesystem : Mac OS Extended (Journaled)
2012-03-13 16:27:02 -0700: Unmounting disk
2012-03-13 16:27:03 -0700: Erasing
2012-03-13 16:27:16 -0700: Initialized /dev/rdisk1s1 as a 466 GB HFS Plus volume with a 40960k journal
2012-03-13 16:27:16 -0700: Mounting disk
2012-03-13 16:27:16 -0700: Erase complete.
2012-03-13 16:27:16 -0700:
2012-03-16 15:42:14 -0700: Disk Utility started.
2012-03-16 15:44:45 -0700: Preparing to partition disk: “WDC WD50 00BPKT-00PK4T0 Media”
2012-03-16 15:44:45 -0700: Partition Scheme: GUID Partition Table
2012-03-16 15:44:45 -0700: 1 partition will be created
2012-03-16 15:44:45 -0700:
2012-03-16 15:44:45 -0700: Partition 1
2012-03-16 15:44:45 -0700: Name : “Macintosh HD”
2012-03-16 15:44:45 -0700: Size : 500.11 GB
2012-03-16 15:44:45 -0700: Filesystem : Mac OS Extended (Journaled)
2012-03-16 15:44:45 -0700:
2012-03-16 15:44:45 -0700: Unmounting disk
2012-03-16 15:44:45 -0700: Creating partition map
2012-03-16 15:44:45 -0700: Waiting for disks to reappear
2012-03-16 15:44:46 -0700: Formatting disk1s2 as Mac OS Extended (Journaled) with name Macintosh HD
2012-03-16 15:44:58 -0700: Partition complete.
2012-03-16 15:44:58 -0700:
2012-03-16 15:46:24 -0700: Restore Disk
2012-03-16 15:46:24 -0700: Source: “Macintosh HD”
2012-03-16 15:46:24 -0700: Destination: “Macintosh HD”
2012-03-16 15:46:24 -0700: Erase Destination: Yes
2012-03-16 15:46:24 -0700: Erase “Macintosh HD” and replace its contents with the contents of “Macintosh HD.”
2012-03-16 15:46:24 -0700:
2012-03-16 15:46:24 -0700: Starting Restore…
2012-03-16 15:46:25 -0700: Validating target...
2012-03-16 15:46:25 -0700: done
2012-03-16 15:46:25 -0700: Validating source...
2012-03-16 15:46:25 -0700: done
2012-03-16 15:46:25 -0700: Erasing target device /dev/disk1s2...
2012-03-16 15:46:38 -0700: done
2012-03-16 15:46:39 -0700: Validating sizes...
2012-03-16 15:46:39 -0700: done
2012-03-16 15:46:39 -0700: Copying
2012-03-16 18:47:53 -0700:
2012-03-16 18:47:57 -0700: Restore took 3 hours, 1 minute
2012-03-16 18:47:57 -0700: Complete.
2012-03-16 18:47:58 -0700:
2012-03-16 22:06:19 -0700: Disk Utility started.
2012-03-16 22:28:56 -0700: Disk Utility started.
2012-03-16 22:54:41 -0700: Verify and Repair volume “Macintosh HD”
2012-03-16 22:54:41 -0700: Starting repair tool:
2012-03-16 22:54:42 -0700: Checking Journaled HFS Plus volume.
2012-03-16 22:54:42 -0700: Checking extents overflow file.
2012-03-16 22:54:43 -0700: Checking catalog file.
2012-03-16 22:55:01 -0700: Checking multi-linked files.
2012-03-16 22:55:02 -0700: Checking catalog hierarchy.
2012-03-16 22:55:33 -0700: Checking extended attributes file.
2012-03-16 22:55:42 -0700: Checking volume bitmap.
2012-03-16 22:55:42 -0700: Checking volume information.
2012-03-16 22:55:42 -0700: The volume Macintosh HD appears to be OK.
2012-03-16 22:55:43 -0700: Volume repair complete.2012-03-16 22:55:43 -0700: Updating boot support partitions for the volume as required.2012-03-16 22:55:43 -0700: Repair tool completed:
2012-03-16 22:55:43 -0700:
2012-03-16 22:55:43 -0700:
2012-03-16 23:08:19 -0700: Disk Utility started.
2012-03-16 23:14:54 -0700: Disk Utility started.I'll have access to the machine again next Tuesday. I can do more tests then re: holding down the Option key. I did try a bunch of key combinations during boot that I found online but none seemed to have any affect. I only received the blinking Folder icon.
The original hard drive has a single partition. As shown in the logs above, the replacement drive was formatted with a single partition. I am noticing one anomaly in the logs, which seems to indicate both failure and success. I don't remember seeing any indication via the GUI that there were any issues.
2012-03-13 16:26:05 -0700: Unmounting disk
2012-03-13 16:26:10 -0700: Volume Erase failed with the error:
Could not unmount disk
2012-03-13 16:26:10 -0700: Erase complete.
2012-03-13 16:26:10 -0700:
2012-03-13 16:26:33 -0700: Preparing to erase : “FreeAgent G”
2012-03-13 16:26:33 -0700: Partition Scheme: Master Boot Record
2012-03-13 16:26:33 -0700: 1 volume will be erased
2012-03-13 16:26:33 -0700: Name : “FreeAgent G”
2012-03-13 16:26:33 -0700: Size : 500.11 GB
2012-03-13 16:26:33 -0700: Filesystem : Mac OS Extended (Journaled)
2012-03-13 16:26:33 -0700: Unmounting disk
2012-03-13 16:26:35 -0700: Volume Erase failed with the error:
Could not unmount disk
2012-03-13 16:26:35 -0700: Erase complete. -
Can I use my Intel-based MacBook to boot into Windows 7 from an external HDD?
Okay, so I need to use Windows for some simple applications. Problem is, I don't have a Windows desktop anymore and while I have both Windows and Linux partitions along with Mountain Lion on my installed hard drive, I'm probably going to wipe said drive and just use the entire partition for Mountain Lion. That said, I'd like to use an extra hard drive I have lying around to boot Windows.
My questions are:
1. Does my MacBook support USB boot to Windows?
2. If my laptop does support this, can someone point me to a set of good reliable instructions to install Windows onto the external hard drive and boot into it by USB?
Thank you; have a blessed day!You seem to have a triple boot system that was done using the 10.6 installer disk and a copy of rEFIt.
I know because I had the same thing once.
I can tell you what will happen if you decide to upgrade 10.7 or 10.8
1: The EFI and GUID is going to change, rEFIt hasn't been updated in ages since 10.7 started rolling out back in about June 2011. There will be adverse effects with rEFIt so I hear.
2: The 10.8 upgrader is going to barf at your triple boot system, it will upgrade the 10.6 partition but warn you that the 10.8 RecoveryHD partition (10.7 and 10.8 both install) that it normally installs at the very bottom of the drive will not be installed and you can't enable Filevault.
Intel Mac's can have only 4 bootable partitions on the drive, the 10.7+ installer is normally dealing with EFI, MacintoshHD, BOOTCAMP, RecoveryHD. It barfs at anything else it doesn't understand and will not install RecoveryHD partition, which on a non-Internet Recovery capable hardware is required to reinstall the currently upgraded OS X operating system version. But you can always go back to the 10.6 disks and wipe and restore that way or via 10.6 USB boot key.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
So with 10.7+ you'll have to use something like Carbon Copy Cloner for the OS X partition.
So since rEFIt is going to be hosed, so will your ability to use the EFI based program to boot into the three operating systems at boot time.
I assume you found this out and why you want to dump Windows on a external drive. However Apple's EFI doesn't recognize Linux as a boot option.
There is a rEFIt fork that will allow Linux to boot on a Mac: http://www.rodsbooks.com/ubuntu-efi/index.html
Windows as you now know can't be booted off a external drive, however if your use of it is minor, you may want to consider using a virtual machine to run it in OS X or Linux instead using the free VirtualBox.
Windows in BootCamp or Virtual Machine?
You should Carbon Copy Cloner the OS X 10.6 partition to a external GUID OS X Extended J (JHFS+) drive.
You can use WinClone 3 in OS X to clone the Windows partition to a external drive, but it's a backup only, no booting capability. Restoring it will boot on the internal drive of course.
Linux you should already know how to clone it to a external drive using dd.
I advise you use the 10.6 install disks to set up your new partition scheme, but your going to have to uninstall rEFIt and return the machine and firmware back to basic Apple factory system as possible before doing anything.
EFI doesn't get erased, it resides in NVRAM and the EFI partition, controls the at boot key commands to boot off OS X install disks, so it's important to uninstall rEFIt completely before upgrading OS X.
If the Windows version your using is XP, to install that first using BootCamp in a fresh 10.6 install and reverse clone using WinClone before upgrading to 10.7 or above. It will be grandfathered in, but can't be reinstalled later.
Maybe you are looking for
-
Cannot Sign in to Ebay ONLY problems, cache, cookies, firewall, what happened???
Hi and thanks in advance for anyone who can help with any suggestions. I downloaded the new version of firefox a few weeks back. The next day I noticed I could not sign in to my Ebay account. I can go anywhere else on the internet and all my sign in/
-
LEAP Authentication for 7929 phones on WLC
We are trying to use LEAP authentication to get 7920 phone authenticated against the WLC, but its not working, Has anyone seen any caviats with this kind of a setup..
-
How i can open a new command prompt from one java from
hi can any one help me that how i can open a command prompt by using the java program file . regards, ukbasak
-
Downloaded files don't appear in iTunes
I'm trying to download an MIT Physics course from iTunesU, but only three random lectures will show up after I download them. The others give me the error "There were problems adding xxx to iTunes." When I go into the "Mymusic" folder there is a "Dow
-
2540 Lost Communication problem
Hi, I came across a strange problem with two of Storagetek 2540s that we are using. When I check their status on CAM, it shows OK. But after a while, their status turns to "Lost Communication" all of a sudden. Once the network cables are unplugged an