Need Inventory Join conditions

Dear All,
I need join conditions on below tables....please help me....
MTL_SYSTEM_ITEMS, MTL_MATERIAL_TRANSACTIONS AND MTL_TRANSACTION_TYPES , MTL_CATEGORIES....
Kindly wating for reply.....
Regards..
krishna
Edited by: user12070109 on Dec 21, 2009 10:44 PM

1) You can join MTL_SYSTEM_ITEMS, MTL_MATERIAL_TRANSACTIONS tables with inventory_item_id,
for example
select mmt.* from mtl_material_transactions mmt,mtl_system_items_b msi
where mmt.inventory_item_id=msi.inventory_item_id
And you can give the organization_id in above qury too if required.
2 ) Similarly you can join MTL_MATERIAL_TRANSACTIONS AND MTL_TRANSACTION_TYPES through
Transaction_type_id like
select mmt.* from mtl_material_transactions mmt,mtl_transaction_types mtt
where mmt.transaction_type_id=mtt.transaction_type_id
3) And for Item Categories there are two table
Mtl_categories_b :- This table contains the category Structures
And Mtl_item_categories: This table contains the inventory_item_id (which is linked to mtl_system_items_b with inventory_item_id) and category_id (which is linked to mtl_categories_b with category_id)
I hope this would be clearer for you. If you need more help then please reply.
If my response or the response of another was helpful, please mark it accordingly*
Thanks
Naveed

Similar Messages

Help needed with JOIN condition

I have two tables tb1 and tb2. They join on two columns, viz., plan_name and activity_name. However, I have to ensure the following conditions while joining:
1. Pick up all the records that join between tb1 and tb2.
2. If tb1.plan_name is 'Adhoc Activity' then pick the rows which join with tb2. Also pick up those rows which don't join with tb2 where plan_name = 'Adhoc Activity'. For example:
tb1 has 2 records with plan_name Adhoc Acitivity
plan_name activity_name
Adhoc Activity A1
Adhoc Activity A2
tb2 has 1 record with plan_name Adhoc Activity
plan_name activity_name
Adhoc Activity A1
then both records from tb1 should be taken. besides other joining records where plan_name <> 'Adhoc Acitivity' should also be taken

user10566312 wrote:
I think the first condition fails. If plan_name is not 'Adhoc Activity' but if it is present in both tb1 and tb2 then it should be picked... like inner join.???
Could you tell, what is the expected output for below data ? Is it not the one what I am getting -"Some Another Activity" is not picked..?
with tb1 as
select 'Adhoc Activity' plan_name,'A1' activity_name from dual union all
select 'Adhoc Activity' plan_name,'A2' activity_name from dual union all
select 'another Activity' plan_name,'A2' activity_name from dual union all
select 'Some another Activity' plan_name,'A2' activity_name from dual
tb2 as
select 'Adhoc Activity' plan_name,'A1' activity_name from dual union all
select 'another Activity' plan_name,'A2' activity_name from dual --union all
select *
from(
   select a.plan_name a_plan_name,b.plan_name b_plan_name,a.activity_name a_act,
          b.activity_name b_act
   from tb1 a,tb2 b
   where a.plan_name = b.plan_name(+)
   and a.activity_name = b.activity_name(+)
where (a_plan_name = 'Adhoc Activity' or b_plan_name is not null)
order by 1;
A_PLAN_NAME           B_PLAN_NAME      A_ACT B_ACT
Adhoc Activity        Adhoc Activity   A1    A1
Adhoc Activity                         A2
another Activity      another Activity A2    A2

INVENTORY & ORDER MANAGEMENT Tables join conditions required

Hi All,
I have to create one view, it has to display item_number, item_description,quantity_in_warehouse and pendingquantity_in_salesorder.
query is based on INVENTORY & ORDER MANAGEMENT Tables. i have written below query, it is not giving expected output. Kindly go through once and rectify me if i did any thing wrong while writing the join conditions.
SELECT mtlb.segment1 Item_Number,
mtlb.description Item_Description,
mtld.transaction_quantity Quantity_in_Wearhouse,
oel.ordered_quantity PendingQuantity_in_SalesOrder
FROM mtl_system_items_b mtlb,
mtl_onhand_quantities_detail mtld,
oe_order_headers_all oeh,
oe_order_lines_all oel
WHERE mtlb.inventory_item_id = mtld.inventory_item_id
AND mtlb.organization_id ; = mtld.organization_id
AND mtlb.inventory_item_id ; = oel.inventory_item_id
AND oeh.header_id ; = oel.header_id
AND oeh.org_id ; = oel.org_id
AND oeh.ship_from_org_id ; = mtlb.organization_id
AND oel.ship_from_org_id ; = mtlb.organization_id
AND mtld.subinventory_code LIKE 'Warehouse'
AND oel.flow_status_code LIKE 'AWAITING_SHIPPING'
ORDER BY mtlb.segment1;
it is bit urgent. please help me to resolve this issue.
Thanks.
Edited by: user627525 on Jul 19, 2010 4:35 AM

Hi Jonny,
Thanks for your reply. it is very useful for me. need small clarification.
i have execute the query that u have given. please find the following output.
segment1 order_number line_number shipment_number on_hand
210020004000011 10005 1 1 139150
210020004000011 10006 1 1 139150
210020004000013 10005 2 1 27675
210020004000013 10006 2 1 27675
i have modified the query and added column ordered_quantity from oe_order_lines_all table.
SELECT
mtlb.segment1 ; as Item_Number,
mtlb.description as Item_Description,
sum(mtld.primary_transaction_quantity) as Quantity_in_Whouse,
oel.ordered_quantity as PQuantity_in_SOrder
FROM oe_order_headers_all oeh,
oe_order_lines_all oel,
mtl_system_items_b mtlb,
mtl_onhand_quantities_detail mtld
WHERE oel.header_id = oeh.header_id
AND oel.inventory_item_id = mtlb.inventory_item_id
AND oel.ship_from_org_id = mtlb.organization_id
AND oel.inventory_item_id = mtld.inventory_item_id
AND oel.ship_from_org_id = mtld.organization_id
AND oel.flow_status_code = 'AWAITING_SHIPPING'
AND mtld.subinventory_code = 'Warehouse'
GROUP By mtlb.segment1,mtlb.description,oel.ordered_quantity
ORDER BY mtlb.segment1;
i have executed the above query. Quantity_in_Whouse is showing double the actual available quantity.
item_number item_description Quantity_in_Whouse PQuantity_in_SOrder
210020004000011 item1 278300 100
210020004000013 item3 55350 125
when i executed the below query, Quantity_in_Whouse is showing 139050 and 27550 respectively.
SELECT mtlb.segment1 Item_Number,
mtlb.description,
sum(mtld.primary_transaction_quantity) Quantity_in_Whouse
FROM mtl_system_items_b mtlb,
mtl_onhand_quantities_detail mtld
WHERE mtlb.inventory_item_id = mtld.inventory_item_id
AND mtlb.organization_id ; = mtld.organization_id
AND mtld.subinventory_code LIKE 'Warehouse'
and mtlb.segment1 in ('210020004000011','210020004000013')
group by mtlb.segment1, mtlb.description
ORDER BY mtlb.segment1;
item_number item_description Quantity_in_Whouse
210020004000011 item1 139050
210020004000013 item3 27550
please give some solution so that i can display Quantity_in_Whouse as 139050 and 27550 .
if i am any thing wrong please rectify me.
Thanks in advance.
Edited by: user627525 on Jul 19, 2010 7:54 AM
Edited by: user627525 on Jul 19, 2010 7:56 AM
Edited by: user627525 on Jul 19, 2010 9:39 AM

Need assistance with conditional join in SQL

Hi All -
I need to ask for help with this query:
Create table user_tab_col_test (table_name varchar2(30), column_name varchar2(30), data_type varchar2(30));
Insert into user_tab_col_test (table_name, column_name, data_type) values ('table1', 'column1', 'varchar2')
Insert into user_tab_col_test (table_name, column_name, data_type) values ('table1', 'column2', 'varchar2')
Insert into user_tab_col_test (table_name, column_name, data_type) values ('table1', 'column3', 'varchar2')
Insert into user_tab_col_test (table_name, column_name, data_type) values ('table1', 'column4', 'varchar2')
Insert into user_tab_col_test (table_name, column_name, data_type) values ('table2', 'column1', 'varchar2')
Insert into user_tab_col_test (table_name, column_name, data_type) values ('table2', 'column2', 'varchar2')
Insert into user_tab_col_test (table_name, column_name, data_type) values ('table2', 'column3', 'varchar2')
Insert into user_tab_col_test (table_name, column_name, data_type) values ('table2', 'column4', 'varchar2')
Commit;
Create table all_cons_columns_test (table_name varchar2(30), column_name varchar2(30), constraint_name varchar2(30))
Insert into all_cons_columns_test (table_name, column_name, constraint_name) values ('table1', 'column1', 'primary')
Insert into all_cons_columns_test (table_name, column_name, constraint_name) values ('table1', 'column1', 'secondary')
Commit;
This is my query and the current result:
Select u.table_name, u.column_name, c.constraint_name
From user_tab_col_test u
Left outer join all_cons_columns_test c
On ( u.table_name = c.table_name
AND U.COLUMN_NAME = C.COLUMN_NAME
AND C.CONSTRAINT_NAME IN ('primary'))
order by U.table_name, U.COLUMN_NAME;
TABLE_NAME COLUMN_NAME CONSTRAINT_NAME
table1 column1 primary
table1 column2
table1 column3
table2 column1
table2 column2
Three questions:
1) I only want to return results where table_name = 'table1'. I can't seem to get this to work.
2) Is my query proper and is this the best way to return my desired results? I.e. I want all columns from user_tab_col_test and I only want to display the constraint_name from all_cons_columns_test if the constraint_name = 'primary'.
3) Will the synatx be the same if I need to join a third table to all_cons_columns_test?
Any advice/suggestions are much appreciated -
john
Edited by: user703358 on Jan 11, 2013 8:57 PM
Edited by: user703358 on Jan 11, 2013 9:48 PM

Hi,
user703358 wrote:
... ALL_CONSTRAINTS_TEST joins to ALL_CONS_COLUMNS_TEST on TABLE_NAME and CONSTRAINT_NAME. If you adapt this to use the data dictionary views ALL_CONSTRAINTS and ALL_CONS_COLUMNS, then rememeber to join on the OWNER column, also.
Ultimately I want to use ALL_CONSTRAINTS_TEST.CONSTRAINT_TYPE = 'P' in my WHERE clause, instead of C.CONSTRAINT_NAME IN (primary), only because the constraint_type is a more definitive attribute than just the name of the constraint.
I tried something like the query below but I'm getting
ORA-00904: "U"."COLUMN_NAME": invalid identifier
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action:
Error at Line: 8 Column: 16Errors like that are caused by trying to mix old join syntax with ANSI join syntax in the same query.
SELECT    u.table_name
,       u.column_name
,       C.CONSTRAINT_NAME
FROM           USER_TAB_COL_TEST      U,
ALL_CONSTRAINTS_TEST ACAbove is an example of an old-style join: there is a comma between the table names, and the join conditions are included in the WHERE clause below.
LEFT OUTER JOIN all_cons_columns_test c
ON    u.table_name    = c.table_name
AND   U.COLUMN_NAME    = C.COLUMN_NAMEThis is an example of an ANSI-style join: the keyword JOIN appears between the table names, and the join conditions are right here, after the keyword ON.
WHERE      U.TABLE_NAME    = 'table1'
AND C.TABLE_NAME = AC.TABLE_NAME
AND C.CONSTRAINT_NAME = AC.CONSTRAINT_NAME
and AC.CONSTRAINT_TYPE = 'P'
ORDER BY u.table_name
,           u.column_name
;While it is possible to use both join styles in the same query, it's a really bad idea. I suggest always using ANSI syntax, especially for outer joins, but whatever style you choose, use it consistently for all joins in the same query.
In this case, you want an inner join between tablec c and ac, so the ANSI syntax would be something like
FROM u LEFT OUTER JOIN c ON ... JOIN ac ON ...In this case, it's very important that the inner join between c and ac is done before the outer join with u. How can you make sure that happens? Well, if you have an arithmetic expression such as
12 * 5 - 1and you want to make sure the subtraction of 1 from 5 takes place before the multiplication by 12, what do you do? You can add parentheses:
12 * ( 5 - 1 )In ANSI join syntax, you can use parentheses the same way:
FROM u LEFT OUTER JOIN ( c ON ... JOIN ac ON ... )or, in full:
SELECT    u.table_name
,        u.column_name
,        c.constraint_name
,       ac.constraint_type
FROM             user_tab_col_test      u
LEFT OUTER JOIN (
                         all_cons_columns_test c
           JOIN all_constraints_test   ac
                             ON   ac.table_name     = c.table_name
                      AND ac.constraint_name     = c.constraint_name
                        ON    u.table_name       = c.table_name
               AND   u.column_name       = c.column_name
               AND   ac.constraint_type = 'P'
WHERE       u.table_name     = 'table1'
ORDER BY u.table_name
,            u.column_name
;Output:
TABLE_NAME COLUMN_NAME CONSTRAINT_NAME CONSTRAINT_TYPE
table1     column1     primary         P
table1     column2
table1     column3
table1     column4

How to use outer join condition in my below query.

Hi All,
How to use outer join condition in my below query.
In the table APPS_JP.GEDIS_OFFER_HEADER goh I have more records
in the table APPS_JP.GEDIS_ORDER_BUILDS gob I have less number of records.
I want all the records from APPS_JP.GEDIS_OFFER_HEADER goh
including other conditions.
I have tried goh.OFFER_NO=gob.OFFER_NO(+) but same result.
[code]SELECT   GOH.ORIG_SYSTEM,
           gsp.USER_NAME,
           goh.ORDER_NO,
           goh.OMEGA_ORDER_NUMBER,
           goh.ORDER_TYPE,
           gc.CUSTOMER_ID,
           gc.OMEGA_CUSTOMER_NUMBER,
           CASE WHEN gc.PRIVATE = 'N' THEN gc.CUSTOMER_NAME ELSE '' END
              AS COMPANY_NAME,
           goh.ORDER_STATUS,
           goh.TOTAL_SELLING_PRICE,
           goh.TOTAL_MARGIN,
              ga1.ADDRESS1
           || ','
           || ga1.ADDRESS2
           || ','
           || ga1.ADDRESS3
           || ','
           || ga1.POSTAL_CODE
           || ','
           || ga1.CITY
              AS SHIPPING_ADDRESS,
              ga2.ADDRESS1
           || ','
           || ga2.ADDRESS2
           || ','
           || ga2.ADDRESS3
           || ','
           || ga2.POSTAL_CODE
           || ','
           || ga2.CITY
              AS BILLING_ADDRESS,
           ga.ADDRESS_ID,
           gol.DESCRIPTION,
           APPS_JP.TZ.to_local_date (goh.OFFER_DATE, goh.OFFER_DATE_UTC)
              AS OFFER_DATE,
           gc.LEVEL_8,
           goh.NO_OF_BUILDS,
           gob.SFDC_ID,
           goh.PURCHASE_ORDER_NO AS PO,
           gc1.CUSTOMER_NAME AS END_USAGE,
           gol.LOB,
           goh.TOTAL_MARGIN_PCT,
           goh.TOTAL_DISCOUNT,
           goh.TOTAL_DISCOUNT_PCT
    FROM   APPS_JP.GEDIS_OFFER_HEADER goh,
           APPS_JP.GEDIS_ORDER_BUILDS gob,
           APPS_JP.GEDIS_ORDER_LINES gol,
           APPS_JP.GEDIS_OFFER_RELATED_CUSTOMER gorc,
           APPS_JP.GEDIS_OFFER_RELATED_CUSTOMER ship,
           APPS_JP.GEDIS_OFFER_RELATED_CUSTOMER bill,
           APPS_JP.GEDIS_CUSTOMER gc,
           APPS_JP.GEDIS_CUSTOMER gc1,
           APPS_JP.GEDIS_CONTACT gct,
           APPS_JP.GEDIS_ADDRESS ga,
           APPS_JP.GEDIS_ADDRESS_NORM ga1,
           APPS_JP.GEDIS_ADDRESS_NORM ga2,
           (SELECT   DISTINCT SALESPERSON_ID, USER_NAME
              FROM   APPS_JP.GEDIS_SALESPERSON
             WHERE   SALESPERSON_ID IN
                           (SELECT   TO_NUMBER (COLUMN_VALUE) AS SALESPERSON_ID
                              FROM   TABLE (APPS_GLOBAL.SplitString ('337309'))))
           gsp
   WHERE       goh.ORDER_NO <> 0
           AND goh.OFFER_NO <> 0
           AND goh.OFFER_NO=gol.OFFER_NO
           AND gol.BUILD_NO = 1
           AND gol.LINE_NO = 1
           AND goh.OFFER_NO=gob.OFFER_NO
           AND gob.BUILD_NO = 1
           AND goh.OFFER_NO = gorc.OFFER_NO
           AND gct.CONTACT_ID = gorc.CONTACT_ID
           AND ga.CUSTOMER_ID = gc.CUSTOMER_ID
           AND ga.PRIMARY = 'Y'
           AND goh.LEAD_SALESPERSON=gsp.SALESPERSON_ID
           AND goh.OFFER_NO = ship.OFFER_NO
           AND ship.RELATION_TYPE = 'SHIP'
           AND ga1.ADDRESS_ID = ship.ADDRESS_ID
           AND ga1.CUSTOMER_ID = gc1.CUSTOMER_ID
           AND goh.OFFER_NO = bill.OFFER_NO
           AND bill.RELATION_TYPE = 'BILL'
           AND ga2.ADDRESS_ID = bill.ADDRESS_ID
           AND goh.OFFER_DATE BETWEEN APPS_JP.TZ.LOCAL_TO_DB_DATE (
                                         SYSDATE - 30
                                  AND APPS_JP.TZ.LOCAL_TO_DB_DATE (SYSDATE)
           AND gorc.RELATION_TYPE = 'BASE'
           AND gorc.CUSTOMER_ID = gc.CUSTOMER_ID
           AND goh.SALES_CHANNEL = gc.SALES_CHANNEL
           AND gc.SALES_CHANNEL = 'SMB'
           AND goh.LEAD_SALESPERSON IN (goh.CREATED_BY, goh.LEAD_SALESPERSON)
ORDER BY   goh.OFFER_NO;[/code]
Please help me how to use this outer join condition.
Thanks in advance.

Hi,
If you want all the rows from goh, then you don't want any conditions like goh.OFFER_NO <> 0.
Make all the joins to goh outer joins, and make all conditions that apply to any tables joined to goh (or to tables joined to them) part of the join condition, like this:
FROM             APPS_JP.GEDIS_OFFER_HEADER     goh
LEFT OUTER JOIN APPS_JP.GEDIS_ORDER_BUILDS     gob ON   gob.OFFER_NO = goh.OFFER_NO
                                                     AND gob.BUILD_NO = 1
LEFT OUTER JOIN APPS_JP.GEDIS_ORDER_LINES      gol ON   gol.OFFER_NO = goh.OFFER_NO
                                                     AND gol.BUILD_NO = 1
                                                     AND gol.LINE_NO = 1
LEFT OUTER JOIN APPS_JP.GEDIS_OFFER_RELATED_CUSTOMER
                                                gorc ...
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
Simplify the problem as much as possible. For example, do you really need all those tables to show what the problem is? Of course, you need them in tyour real query, but if you understand a solution that only involves 4 or 5 tables, you'll know how to apply it to any number of tables.
Explain, using specific examples, how you get those results from that data.Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ https://forums.oracle.com/message/9362002#9362002

In-different behaviour of join condition

My query is of in-different behaviour of join condition with join between a varchar2 column and a number column. I am using the following join condition :-
CM.UPDATED_BY=to_char(LM.LOGIN_ID)
where CM.UPDATED_BY is a varchar2 column and LM.LOGIN_ID is a number column. Now, CM.UPDATED_BY also has number only but some previous & old data is having varchar2 data. So, for that reason, i put the to_char before LM.LOGIN_ID, otherwise, only
CM.UPDATED_BY=to_char(LM.LOGIN_ID)
would having been okay. Now, my real question is that the query with the condition,
CM.UPDATED_BY=to_char(LM.LOGIN_ID)
works fine as long as there is no 'character' data in 'CM.UPDATED_BY'. If i put the condition:
CM.UPDATED_BY=to_char(LM.LOGIN_ID)
then, the query is taking too long and the output is also not coming. Please help in solving my doubt as i need it resolved urgently.

1) Did you intend for all 4 join conditions to be identical? From the text of your question, it sounds like some of the conditions should be different.
2) How do you compare the running time when CM.UPDATED_BY has non-numerica data and when it has numeric data? If you are altering the data in the table, are you reanalyzing the table between runs? Is there a difference in the query plan in the two cases?
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com/askDDBC

How to add join conditions in ABAP Query.

Hi,
I need a help on "ABAP Query".
How to add join conditions in ABAP Query.
Thanks in advance.
Thanks & Regards,
Ramana

Hi,
See below code,
*& Report ZRNP_ALV_SO
REPORT zrnp_alv_so MESSAGE-ID z7rnp .
INCLUDE zrnp_include .
*SELECTION SCREEN                                                      *
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-004 .
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln ,
                s_auart FOR v_auart ,
                s_vkorg FOR v_vkorg ,
                s_spart FOR v_spart ,
                s_kunnr FOR v_kunnr ,
                s_matnr FOR v_matnr .
SELECTION-SCREEN END OF BLOCK blk1 .
*AT SELECTION SCREEN                                                   *
AT SELECTION-SCREEN.
SELECT SINGLE vbeln
                 FROM vbak INTO vbak-vbeln
                 WHERE vbeln IN s_vbeln.
IF sy-subrc <> 0.
    MESSAGE e202.
ENDIF.
*START OF SELECTION                                                    *
START-OF-SELECTION .
PERFORM data_select.
PERFORM t_sort USING i_sort .
PERFORM event_cat USING i_event .
PERFORM fld_cat USING i_fldcat[] .
PERFORM t_layout USING i_layout .
PERFORM fld_cat2 USING i_fldcat2[] .
PERFORM call_alv.
* DATA SELECT                                                          *
*&      Form DATA_SELECT
*       text
* --> p1        text
* <-- p2        text
FORM data_select .
REFRESH: it_vbfa, it_so1, it_del_ful ,it_del1 .
BREAK-POINT.
*SELECT*
        *a~vbeln*
        *a~auart*
        *a~vkorg*
        *a~spart*
        *a~kunnr*
        *b~posnr*
        *b~matnr*
        *c~maktx*
        *b~kwmeng*
        *b~vrkme*
        *INTO TABLE it_so1 FROM vbak AS a*
              *INNER JOIN vbap AS b ON b~vbeln = a~vbeln*
              *INNER JOIN makt AS c ON c~matnr = b~matnr*
              *AND c~spras = sy-langu*
              *WHERE a~vbeln IN s_vbeln .*
IF sy-subrc = 0.
    SORT it_so1 BY vbeln.
    DELETE ADJACENT DUPLICATES FROM it_so1.
ENDIF.
* COLURING DISPLAY                                                     *
DATA: ld_color(1) TYPE c .
* LOOP AT it_so1 INTO wa_so.
* Populate color variable with colour properties
* Char 1 = C (This is a color property)
* Char 2 = 3 (Color codes: 1 - 7)
* Char 3 = Intensified on/off ( 1 or 0 )
* Char 4 = Inverse display on/off ( 1 or 0 )
*           i.e. wa_ekko-line_color = 'C410'
*    ld_color = ld_color + 1.
* Only 7 colours so need to reset color value
*    IF ld_color = 8.
*      ld_color = 1.
*    ENDIF.
*    CONCATENATE 'C' ld_color '10' INTO wa_so-line_color.
** wa_ekko-line_color = 'C410'.
*    MODIFY it_so1 FROM wa_so.
* ENDLOOP .
* IF sy-subrc = 0.
IF NOT it_so1[] IS INITIAL.
    SELECT vbelv
           posnv
           vbeln
           posnn
           vbtyp_n
           INTO TABLE it_vbfa
           FROM vbfa
           FOR ALL ENTRIES IN it_so1
           WHERE vbelv = it_so1-vbeln
           AND   posnn = it_so1-posnr
           AND vbtyp_n ='J' .
    IF sy-subrc = 0.
      SELECT vbeln
             posnr
             matnr
             werks
             lgort
             charg
             lfimg
             vrkme
             FROM lips INTO TABLE it_del_ful
             FOR ALL ENTRIES IN it_vbfa
             WHERE vbeln = it_vbfa-vbeln
             AND   posnr = it_vbfa-posnn.
    ENDIF.
ENDIF.
ENDFORM.                    " DATA_SELECT
**************** EVENT CATALOG ****************************************
*&      Form EVENT_CAT
*       text
*      -->P_I_EVENT text
FORM event_cat USING    p_i_event TYPE slis_t_event .
REFRESH p_i_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
* EXPORTING
*   I_LIST_TYPE           = 0
   IMPORTING
      et_events             = p_i_event
* EXCEPTIONS
*   LIST_TYPE_WRONG       = 1
*   OTHERS                = 2
* IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
**         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
READ TABLE p_i_event WITH KEY name = slis_ev_top_of_page INTO t_event.
IF sy-subrc = 0.
    MOVE 'TOP_OF_PAGE' TO t_event-form.
    MODIFY p_i_event FROM t_event INDEX sy-tabix TRANSPORTING form.
ENDIF.
CLEAR t_event .
ENDFORM.                    " EVENT_CAT
**********FORM FOR EVENT TOP_OF_PAGE**********************************
FORM top_of_page .
REFRESH i_listheader.
DATA: t_header TYPE slis_listheader.
DATA: v_text(50).
WRITE sy-datum TO v_text.
CLEAR t_header.
t_header-typ = 'S'.
t_header-key = "Date".
t_header-info = v_text.
APPEND t_header TO i_listheader.
CLEAR t_header.
CLEAR v_text.
WRITE: 'SALES ORDER & DELIVERY DETAILS REPORT ' TO v_text .
t_header-typ = 'S'.
t_header-key = 'TITLE'.
t_header-info = v_text.
APPEND t_header TO i_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = i_listheader.
*      I_LOGO             = 'ALV_BACKGROUND'.
*   I_END_OF_LIST_GRID       =
ENDFORM.                    "TOP_OF_PAGE
******** FIRST ALV GRID DISPLAY ***************************************
FORM call_alv .
* FORM TO MAKE THE CELL CONTENTS INVISIBLE.
* PERFORM INVISIBLE_CELL_CONTENTS. *
*EXCLUDE-DECLARATION.
CLEAR wa_exclude.
wa_exclude-fcode = '&VEXCEL'.
APPEND wa_exclude TO i_exclude.
*&      Form CALL_ALV
*       text
* --> p1        text
* <-- p2        text
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = sy-repid
*    I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
     i_callback_user_command           = 'USER_COMMAND1'
     i_callback_top_of_page            = 'TOP_OF_PAGE'
     i_background_id                   = 'ALV_BACKGROUND'
     is_layout                         = i_layout
     it_fieldcat                       = i_fldcat[]
     it_excluding                      = i_exclude
     it_sort                           = i_sort
     it_events                         = i_event
    TABLES
     t_outtab                          = it_so1
* IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
**         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
ENDFORM.                    " CALL_ALV
************** FIRST FIELDCATALOG *************************************
*&      Form FLD_CAT
*       text
*      -->P_I_FLDCAT[] text
FORM fld_cat USING    p_i_fldcat TYPE slis_t_fieldcat_alv.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'VBELN'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'."TABLE NAME
i_fldcat-seltext_m   = 'SALES ORDER NO.'.
i_fldcat-col_pos     = 1.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-hotspot     = 'X'.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'AUART'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'."TABLE NAME
i_fldcat-seltext_m   = 'SALES DOC. TYPE'.
i_fldcat-col_pos     = 2.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 15.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'VKORG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'SALES ORG.'.
i_fldcat-col_pos     = 3.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 12.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'SPART'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'DIVISION'.
i_fldcat-col_pos     = 4.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 10.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'KUNNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'SOLD TO PARTY'.
i_fldcat-col_pos     = 5.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 15.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'POSNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'SALES DOC. ITEM'.
i_fldcat-col_pos     = 6.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 17.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'MATNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'MATERIAL NO.'.
i_fldcat-col_pos     = 7.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'MAKTX'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'DESCRIPTION'.
i_fldcat-col_pos     = 8.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'KWMENG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'QUANTITY'.
i_fldcat-col_pos     = 9.        " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 15.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-do_sum    = 'X'.        " For doing "SUM"
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
CLEAR i_fldcat.
i_fldcat-fieldname   = 'VRKME'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat-tabname     = 'IT_SO1'.
i_fldcat-seltext_m   = 'SALES UNIT'.
i_fldcat-col_pos     = 10.       " POSITION OF THE COLUMN.
i_fldcat-outputlen   = 10.       " SET THE OUTPUT LENGTH.
i_fldcat-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat-just(1)     = 'C'.
APPEND i_fldcat.
ENDFORM.                    " FLD_CAT
****************** ALV SORTING ***************************************
*&      Form SORT
*       text
*      -->P_I_SORT text
FORM t_sort USING    p_i_sort TYPE slis_t_sortinfo_alv .
DATA: i_sort TYPE slis_sortinfo_alv .
REFRESH p_i_sort .
CLEAR i_sort.
i_sort-spos = 1.
i_sort-tabname = 'IT_SO1'.
i_sort-fieldname = 'VBELN'.
i_sort-up = 'X'.
i_sort-subtot = 'X'.
i_sort-group = '*'.
APPEND i_sort TO p_i_sort.
ENDFORM.                    " SORT
*FORM SET_PF_STATUS USING rt_extab TYPE slis_t_extab.
* SET PF-STATUS 'ZSTANDARD'.
*ENDFORM. "Set_pf_status
***********FORM FOR EVENT USER_COMMAND1********************************
FORM user_command1 USING r_ucomm LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
*CASE R_UCOMM .
*    WHEN '&IC1' .
*    IF rs_selfield-FIELDNAME = 'VBELN' .
*    ENDIF .
* WHEN OTHERS .
* ENDCASE .
CLEAR wa_so.
REFRESH: it_del1 .
IF r_ucomm = '&IC1' AND rs_selfield-fieldname = 'VBELN' AND
rs_selfield-value IS NOT INITIAL.
    READ TABLE it_so1 INTO wa_so INDEX rs_selfield-tabindex.
    IF sy-subrc = 0.
      LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = wa_so-vbeln
                                   AND   posnv = wa_so-posnr.
        READ TABLE it_del_ful INTO wa_it_del_ful
             WITH KEY vbeln = wa_vbfa-vbelv
                      posnr = wa_vbfa-posnn.
        IF sy-subrc = 0.
          CLEAR wa_del.
          MOVE wa_it_del_ful TO wa_del.
          APPEND wa_del TO it_del1.
        ENDIF.
      ENDLOOP.
    ENDIF.
ENDIF.
********* SECOND ALV GRID DISPLAY ***********************************
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
    i_callback_program                = sy-repid
*   I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
    i_callback_user_command           = 'USER_COMMAND2'
    i_callback_top_of_page            = 'TOP_OF_PAGE'
    i_background_id                   = 'ALV_BACKGROUND'
    it_fieldcat                       = i_fldcat2[]
    it_sort                           = i_sort
    TABLES
    t_outtab                          = it_del_ful
* IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
**         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
ENDFORM .                    "USER_COMMAND1
********** FORM FOR EVENT USER_COMMAND 2 ******************************
FORM user_command2 USING r_ucomm LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
CLEAR wa_so.
REFRESH: it_del1 .
IF r_ucomm = '&IC1' AND rs_selfield-fieldname = 'VBELN' AND
rs_selfield-value IS NOT INITIAL.
    READ TABLE it_so1 INTO wa_so INDEX rs_selfield-tabindex.
*    IF SY-SUBRC = 0.
*       LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = WA_SO-vbeln
*                                    AND   posnv = WA_SO-posnr.
    READ TABLE it_del_ful INTO wa_it_del_ful
         WITH KEY vbeln = rs_selfield-value
                 " vbeln = wa_vbfa-vbeln
                  posnr = wa_vbfa-posnn.
    IF rs_selfield-fieldname = 'VBELN'.
      SET PARAMETER ID 'VL' FIELD wa_vbfa-vbeln .
      CALL TRANSACTION 'VL03' AND SKIP FIRST SCREEN.
    ENDIF .
*       ENDLOOP.
*    ENDIF.
ENDIF.
ENDFORM .                    "USER_COMMAND2
********* SECOND FIELDCATALOG ******************************************
*&      Form FLD_CAT2
*       text
*      -->P_I_FLDCAT2[] text
FORM fld_cat2 USING    p_i_fldcat2 TYPE slis_t_fieldcat_alv .
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'VBELN'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-tabname     = 'IT_DEL_FUL'."TABLE NAME
i_fldcat2-seltext_m   = 'DELIVERY NO.'.
i_fldcat2-col_pos     = 1.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-hotspot     = 'X'.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'POSNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m   = 'DELIVERY ITEM'.
i_fldcat2-col_pos     = 2.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'MATNR'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m   = 'MATERIAL NO.'.
i_fldcat2-col_pos     = 3.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'WERKS'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m   = 'PLANT.'.
i_fldcat2-col_pos     = 4.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'LGORT'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m   = 'ST. LOCATION'.
i_fldcat2-col_pos     = 5.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'CHARG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m   = 'BATCH NO.'.
i_fldcat2-col_pos     = 6.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'LFIMG'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m   = 'ACT. DEL. QTY.'.
i_fldcat2-col_pos     = 7.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
CLEAR i_fldcat2.
i_fldcat2-fieldname   = 'VRKME'. "FIELD FOR WHICH CATALOG ID FILLED
i_fldcat2-seltext_m   = 'SALES UNIT.'.
i_fldcat2-col_pos     = 8.        " POSITION OF THE COLUMN.
i_fldcat2-outputlen   = 20.       " SET THE OUTPUT LENGTH.
i_fldcat2-emphasize   = 'X'.      " COLOR OF THIS COLUMN.
i_fldcat2-key         = 'X'.      " SO THAT THIS FIELD IS NOT
"SCROLLABLE AND HIDDABLE.
i_fldcat2-just(1)     = 'C'.
APPEND i_fldcat2.
ENDFORM.                                                    " FLD_CAT2
***************** ALV LAYOUT *******************************************
*&      Form LAYOUT
*       text
*      -->P_I_LAYOUT text
FORM t_layout USING    p_i_layout TYPE slis_layout_alv .
p_i_layout-zebra = 'X'.
p_i_layout-totals_text = 'GRAND TOTAL ='.
* p_i_layout-CONFIRMATION_PROMPT = 'X'.
* p_i_layout-DEF_STATUS = ' '.
p_i_layout-info_fieldname = 'LINE_COLOR'.
ENDFORM.                    " LAYOUT

Very urgent (using join conditions in PI)

Hi PI gurus.
My scenario is SOAP to JDBC(Portal Webdynpro screen to Oracle database).
I have a requirement to fetch some complex data from the database using complex nested queries.How can i go ahead using join conditions in PI.Here the client is insisiting only on queries and rejected all other methods for solving this like
1)Java proxies
2)stored procedures written in the database system
3)Create a logical view in database system .
The following option is permitted for me by the client to follow
· Using the SQL_QUERY as a query method in the JDBC Receiver Channel in XI
· Trying out JOIN conditions to make multiple query into a single query:- Here need to check the feasibility of the JOIN Condition
Please help me to complete our task.
points will be rewarded for helpful answers.
Thanks & Regards
         Veena

Define the data structures (Request & Response)
A JDBC Synchronous scenario, the response message type name is dependent on the request message type name
i.e., if request is
Dear Raj,
This is my scenario SOAP-to-JDBC(syn) with out using BPM's.
4datatypes & message types,
MT_JDBCRequest
--->Statement1
My response msg type
MT_JDBCRequest_response
>Statement1_response
>row
twoMessage Interfaces, two mappings (for request & response) and one interface mapping
Configure the Objects In Integration directory.
Define the Web services and save the WSDL file After completion of configuration.
WSDL file is used for the integration of Portal - PI scenario.
Process Flow:
1.     User requests for a report from the available list of PSMA reports by providing required set of input parameters.
2.     Portal forwards the request with these input parameters to PI using web service model through SOAP protocol and the required results are derived from PI
3.     Report is viewed on portal screen.
Thanks & regards,
   Veena

What is the Join condition between mtl_system_items_b and mtl_onhand_quantities_detail

Hi,
What is the Join condition between mtl_system_items_b and mtl_onhand_quantities_detail?
Thanks & Regards,
Hari Babu

Please see the query in (Consolidate Onhand Quantity /Sum Quantity Zero in MTL_ONHAND_QUANTITIES_DETAIL (MOQD) / Concurrent Program Consolidate Inventory Onhand Quantities / Datafix for 0 Quantity Displayed For Finished Goods (Doc ID 353345.1)), is shows how to join those 2 tables.
http://etrm.oracle.com
Thanks,
Hussein

How to influence join condition in Adhoc analysis

We have a subject area created that has *2 facts tables*. In one of the adhoc reports, the report query is taking the join from the second fact table instead of the first fact table for columns picked from common dimensions. Need to know how to influence join condition in Adhoc analysis, or OBIEE criteria with which the fact to make a join is chosen.
Requirement is to have a count of records in Dimension table, based on first fact - failure part, and then second fact - failure reason.

Hi User,
Set an implicit fact column in presentation layer to force a join,
http://gerardnico.com/wiki/dat/obiee/implicit_fact_column
Regards,,
Dpka

DB view - join conditions order

Hi gurus
I wonder if, while creating a DB view, the order of join conditions will affect the overall performance. In my case, i need to join COEP, COBK and TKA01. Actually the join conditions are, in this order:
COEP     MANDT     =     TKA01     MANDT
COEP     KOKRS     =     TKA01     KOKRS
COBK     MANDT     =     COEP     MANDT
COBK     KOKRS     =     COEP     KOKRS
COBK     BELNR     =     COEP     BELNR
To achieve a better performance, may I change the order (up/down or left/right)?
Thank you! <removed by moderator>
Edited by: Thomas Zloch on Jan 19, 2012

My problem is that basis admnistrator is asking me why in the execution plan there is a TABLE ACCESS FULL COBK (see 5th point of the log). Any suggestion?
SELECT STATEMENT ( Estimated Costs = 644.937 , Estimated #Rows = 0 )
---   7 HASH JOIN
( Estim. Costs = 644.937 , Estim. #Rows = 3.507.206 )
Estim. CPU-Costs = 41.978.142.620 Estim. IO-Costs = 640.056
Memory Used KB: 1.252.352
Access Predicates
--   2 TABLE ACCESS BY INDEX ROWID TKA01
Estim. CPU-Costs = 5.909 Estim. IO-Costs = 0
1 INDEX RANGE SCAN TKA01~0
Search Columns: 1
Estim. CPU-Costs = 2.784 Estim. IO-Costs = 0
Access Predicates
      ---   6 HASH JOIN
( Estim. Costs = 644.895 , Estim. #Rows = 2.475.675 )
Estim. CPU-Costs = 41.623.110.298 Estim. IO-Costs = 640.056
Memory Used KB: 21.261.312
Access Predicates
--   4 TABLE ACCESS BY INDEX ROWID COEP
( Estim. Costs = 502.319 , Estim. #Rows = 2.475.675 )
Estim. CPU-Costs = 19.972.892.425 Estim. IO-Costs = 499.997
3 INDEX RANGE SCAN COEP~1
( Estim. Costs = 149.180 , Estim. #Rows = 2.475.675 )
Search Columns: 3
Estim. CPU-Costs = 16.424.997.869 Estim. IO-Costs = 147.270
Access Predicates Filter Predicates
5 TABLE ACCESS FULL COBK
                  ( Estim. Costs = 100.134 , Estim. #Rows = 20.711.400 )
                  Estim. CPU-Costs = 16.102.369.535 Estim. IO-Costs = 98.262
                  Filter Predicates

Error in parsing join condition!

Forms 5.0: Trying to use 'or' or parentheses in join condition and keep getting "error in parsing join condition". Need to check 3 different buckets in relating 2nd table to 1st. I'm trying to find records in table2 where at least one of po_no1, po_no2 and po_no3 matches table1.po_no. Any suggestions?
Here's what I've tried:
table1.po_no in (table2.po_no1, table2.po_no2, table2.po_no3)
table1.po_no = table2.po_no1 or
table1.po_no = table2.po_no2 or
table1.po_no = table2.po_no3
table1.po_no in (select distinct po_no1
from table2 union select distinct po_no2 from table2 union select distinct po_no3
from table2)

Andreas Weiden wrote:
As far as i know you cannot create relationships between non-db-blocks (or maybe you can create them, but they will not work).Hi
Oh yes u can for query purposes only e.g. suppose i have dept table and emp table created Master Block as non-db dept_no & Dept_name and a Detail_block with emp tabel and a dept_no as a foreign key ...
1. we either set up a form relation ship between the two blocks - if we want the user to retrieve data only -
2. or we use copy value property in the dept_no item in the detail block to get the copied value from the dept_no of the master to the dept_no of the detail
3.While the user entered or select the dept_no in the Master Block then Press Entered here comes the role of the WHEN-BLOCK-INSTANCE Trigger
GO_BLOCK('DEATIL_BLOCK_NAME');
EXECUTE_QUERY;Here the data will be displayed in the detail block accordingly ...
So the relation here played the role of the Where Statment or the default where to filter the displaing of data in the Detail Block according to the Master Block
Regards,
Amatu Allah.

Join condition validation error in owb 10gR2

Hi friends,
When I tried to validate the join condition in the mapping im getting the below error like
an error occurred during expression validation, bad expression return type
When I googled for the above error, I got the below link mentioning like a bug for that join condition validation problem
https://forums.oracle.com/thread/717194
In which it is mentioned like a BugNo: 7417869 for that issue.
Is there any fix for that bug??
Thanks in advance.
Brgds,
Mini

Dear Allan,
Happy to get reply from you and sorry for my late reply as im been stuck with other work
Like you said, I downloaded the required patch 4898608 for the validation bug in mapping with owb 10.2.0.4. By viewing the readme.txt file of the patch I followed the below steps like
Set the ORACLE_HOME environment variable to point to the OWB Home
Add $ORACLE_HOME/OPatch in the PATH
Stopped the runtime service using the supplied SQL*PLUS script stop_service.sql as a rep_owner
      OWB_HOME/rtp/sql/stop_service.sql
After the above three steps I applied the opatch like below in cmd prompt
C:\orahome\10gR3_1\OPatch>opatch version
Invoking OPatch 10.2.0.4.9
OPatch Version: 10.2.0.4.9
OPatch succeeded.
C:\OraHome_1\OPatch>opatch apply
Invoking OPatch 10.2.0.4.9
Oracle Interim Patch Installer version 10.2.0.4.9
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home       : C:\OraHome_1
Central Inventory : C:\Program Files (x86)\Oracle\Inventory
   from           : n/a
OPatch version    : 10.2.0.4.9
OUI version       : 10.2.0.1.0
OUI location      : C:\OraHome_1\oui
Log file location : C:\OraHome_1\cfgtoollogs\opatch\opatch2013-06-24_18-14-27PM.
log
Patch history file: C:\OraHome_1\cfgtoollogs\opatch\opatch_history.txt
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = C:\OraHome_1\OPatch
Details = PatchObject constructor: Input file "C:\OraHome_1\OPatch\etc\config\
actions" or "C:\OraHome_1\OPatch\etc\config\inventory" does not exist.
ApplySession failed: PatchObject constructor: Input file "C:\OraHome_1\OPatch\et
c\config\actions" or "C:\OraHome_1\OPatch\etc\config\inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code = 73
C:\OraHome_1\OPatch>
Im not sure why the above error is occuring, kindly help me with that error.
Thanks in advance.
Brgds,
Mini

Identify join condition between any two table.

Hi,
I have set of tables. I don't know whether these tables are interlinked or not. I need to identify the underlying join condition in. As per my knowledge if my datasource is based upon infoset query , then I can go to SQ02 and find the underlying join condition. But in this case, I have only table names. How do i find whether they are interlinked or not.
Thanks in advance
Regards
Snehasish

Hi ,
Go to SE11 t-code
select VIEW radio button
give view name start with Z.select create button
select databseview radiobutton. select copy button.
it opens a view creation window.
give table names in leftside .
select RELATIONSHIP button.

SQL Join between two tables two columns, but the data in the join condition could be null.

hello all,
can anyone help me write an outer join b/n the two tables below. The joining condition has if's and or's.
table 1 has 2 million rows, table 2 is very small
TABLE1
CUSTOMER_ID
CITY
STATE
1
SKOKIE
IL
2
CHICAGO
IL
3
CARY
NC
ERIE
PA
PHILLY
PA
CHARLOTE
NC
2 MILLION
CITYXY
STATEX
TABLE2
CITY
STATE
CONTACT
IL
OJO
ERIE
BRITT
PA
MIKE
PITTSBURG
PA
HILTON
N043
TAT
affi
B
affi
R
b0b
Q
b0b
CHARLOTE
NC
b0b
problem :: for all the data in table1, I need to find out the CONTACT from table 2 And the join condition would be as below
1. either both TABLE1.CITY=TABLE2.CITY AND TABLE1.STATE=TABLE2.STATE and get CONTACT
OR
2. TABLE1.CITY=TABLE2.CITY AND TABLE2.STATE IS NULL and get the value of CONTACT
OR
3. TABLE1.STATE=TABLE2.STATE AND TABLE2.CITY is null and get the value of CONTACT
I need a query like this
SELECT A.CUSTOMER_ID, A.CITY, A.STATE, B.CONTACT
FROM TABLE1 A, TABLE2 B
WHERE (join condition fitting in the 3 condition mentioned above)

Dear OP,
Do you want something like this?
> with t1 as
-- Start of SAMPLE DATA
(select 1 CUSTOMER_ID, 'SKOKIE' CITY, 'IL' STATE from dual union
select 2, 'CHICAGO', 'IL' from dual union
select 3, 'CARY', 'NC' from dual union
select 4, 'ERIE', 'PA' from dual union
select 5, 'PHILLY', 'PA' from dual union
select 6, 'CHARLOTE', 'NC' from dual)
t2 as
(select null CITY, 'IL' STATE, 'OJO' CONTACT from dual union
select 'ERIE', null, 'BRITT' from dual union
select null, 'PA', 'MIKE' from dual union
select 'PITTSBURG', 'PA', 'HILTON' from dual union
select 'N043', 'TAT', 'affi' from dual union
select null,'B', 'affi' from dual union
select null,'R', 'b0b' from dual union
select null,'Q', 'b0b' from dual union
select 'CHARLOTE', 'NC', 'b0b' from dual
--- END IF SAMPLE Data
select * from t1 full outer join t2
on ( nvl(t1.city,t2.city) = nvl(t2.city,t1.city)
and nvl(t1.state,t2.state) = nvl(t2.state,t1.state) )
order by 1,2,3,4
CUSTOMER_ID CITY     STATE CITY      STATE CONTACT
          1 SKOKIE   IL              IL    OJO
          2 CHICAGO IL              IL    OJO
          3 CARY     NC
          4 ERIE     PA    ERIE            BRITT
          4 ERIE     PA              PA    MIKE
          5 PHILLY   PA              PA    MIKE
          6 CHARLOTE NC    CHARLOTE NC    b0b
                           N043      TAT   affi
                           PITTSBURG PA    HILTON
                                     B     affi
                                     Q     b0b
                                     R     b0b
12 rows selected
Elapsed: 00:00:00.112
Hope this is helpful. If not please let us know what is you desired result (sample) if your data was like above?
vr,
Sudhakar

Need Inventory Join conditions

Similar Messages

Maybe you are looking for