Need IP to be white listed
Hi,
The server that I used to send email out has been successfully in sending the email to about 60 - 70 verizon.net addresses, until last weekend when it failed. After using this form,
http://my.verizon.com/micro/whitelist/RequestForm.aspx?id=isp
I got an email stating that
Your IP has been blocked because of spam issues or because your ISP indicates that it is dynamically assigned
But how do I get an exemption? The server is a government agency server.
Do you have a Residential or a Business account with Verizon?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.
Similar Messages
-
How contact apple to get the ip white listed ?
Hi everyone,
I'am from France and I need to create a hundred account for Itunes, with the Itunes limit i can't create more than 10 accounts ?? I contact Itunes Support but i don't get any answer ! So i ask to the communities how to contact apple to get the ip white listed specially in France?
Thanks for your help,
Best regards.Hey bp0070,
I understand that you are having issues connecting your wireless keyboard to your Mac Mini. In my experience, the following article (and those linked within) usually resolve these issues:
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/TS3048
Thanks,
Matt M. -
Hi Experts!
We have an issue when displaying originals(in DIRs) in PLM WUI, Portal.
The issue can be summarized like this:
JPG-Images or PDF files are stored on a shared folder. (Not in SAP System)
We then create an original in a DIR(document info record). We do NOT check in the original but only use file as a link.
(In our solution we will not check in the originals but the versioning will be controlled in the linked folder).
Example:
We create an original with the following link
sharedfolder\images\image01.jpg
Anyone can afterwards log on the system and click display original and the jpf or pdf is shown.
This procedure works perfectly fine when we are in SAPGUI.
But in the Portal the system acts different from case to case.
Case 1
When a colleague of mine has added an original in SAPGUI and I
then press display in Portal I get a security list error message, Wrong downloading server
(We have defined the white list, TCode wdr_acf_wlist, and downloaded it.
In this case we have tried
sharedfolder\images\ as downloading server for example)
Case 2
When I have added an original in SAPGUI and then press display in the Portal the image is shown
->Why do I NOT get the error message in this case?
Any ideas why the system works this way and how I can solve it?
Thanks in advance!
MikaelHi Mikael,
I was led to this thread via search on SDN for "white list". We need to set up an external facing portal and need to set up reverse proxy plus white list. We have an OSS message running with prio very high but don't seem to get a helpful answer. Can you give info on how to configure the revese proxy (we aim at citrix gateway as reverse proxy) with white list? or can you describe your architecture with focus on white list? very kind regards, Matthias Kasig -
Add IP address ranges to my airport extreme firewall white list.
I need to add IP address ranges to my airport extreme firewall white list. This is so Security Metrics can access my computer and approve a scan for my credit card PCI compliance. How do i add ip ranges?
Sorry, but this option is not available with the AirPort routers. The only control you have over the AirPort's NAT firewall is either to enable/disable it or to configure it for Port Mapping. There are no option that supports whitelisting/blacklisting IP addresses/ranges.
If this is an important requirement, you may need to replace your current AirPort with another vendor's product that will support this. -
Backing up the DHCP static client list and the netboot white list?
Hi,
we're using a DHCP server here with a list of static clients. Those clients are white-listed via the netboot service.
Can someone please tell me where these services keep their data? So far I've been doing full-image backups but since the servers need to be running 24/7 now, I need to be able to pull backups via the command shell.
peterServer Admin.app, Server Menu -> Export -> Service settings
or:
'sudo serveradmin settings dhcp' > dhcp_settings
'sudo serveradmin settings netboot' > netboot_settings -
LG G2 block text message black/white list ???
K, I just got the LG G2 the other day and say that when you go to block a text message there is a black and white list.
What are the differences?Dizzybandit, I want to make sure that we are getting you the correct information. I'm not exactly finding where this list is at. Can you please tell me where you see this? Are you going into Messaging (the Green smiley face conversation bubble)? Or are you using a different application? We really want to get to the bottom of this ASAP.
KevinR_VZW
Please follow us on Twitter @VZWSupport -
Hey there! So I plugged in my ipod to my computer and it didn't show up where it normally does. I need to update my song list. How can I make it appear? It doesn't come up in iphoto either. A few days ago my sis plugged it into another computer but I don't know if she synched it to the other computer, and frankly, she won't remember. I have tried updating itunes, charging the ipod, restarting the ipod/computer, and the rest of what the apple site said to do. Ps I have the latest ipod touch
I need help stat! Please help!I'd say your sister messed up and your iPod is toasted.
Think about it... She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer...
Also take into consideration how old is your sister, and how much does she know about electronics? -
i have a line drawing (black on white paper) i have scanned and need to make the white paper transparent, maintaining the line drawing, can i and then HOW can i do this in PS? this is for my business logo. ive used it for years but with a solid background. id like to have it just be the drawing over my photos with a transparent background.
First let me apologize for posting a reply that was only suitable for advanced users. Photoshop is broad and powerful therefore has a huge learning curve. In fact I would state no one knows and uses all of Photoshop. When we first get Photoshop it intimidate us and we're very uncomfortable using it. Many thing are not intuitive there in much learning involved. After some time we begin to know something and we are able to do some thing. Learning become rapid and we start playing in Photoshop. It is very important to play with Photoshop. Playing with Photoshop and asking for help with in forums like this IMO is the best way to learn.
Photoshop Power lies in layers, selection and automation. However it takes knowledge to use photoshop well so most powerful tool you have ins Photoshop is the gray matter between your ears. Most at one time or another want to watermark or put a logo on their image. So its best to automate this process. All run into a problem in the process. "Size" We find our assets vary in size and aspect ratios. Landscape, Portraits, Panoramas and others. This complicates automation. Vector graphics works best when size vary greatly. If you can not work out how to create a vector solution like a custom shape. Create your Logo and watermark large thing scale down better the up. Text scale well for text uses vectors graphics however if you rasterize text it will not scale well.
I do not type or do English well so let me do some screen captures. I can not stress enough how important Black, White, Grays and Blending is when it come to image processing. Become friends with Multiply, Screen, Overlay and Luminosity blending.....
However when there is a white or black background though you can blend them you can not add a style like a drop shadow, emboss or make it invisible setting fill to 0 so only the style is visible. When there is contrast between the logo and background it is easy to separate the two. To select the background and delet it to have the logo with a transparent background. Many tools can be used to create the selection hee I use my action kill white.
Vector Shape would work better for scaling However it would be best to create the logo from scratch in a vector program like illustrator but I never had the resources to justify the Creative suite. I only had Photoshop. Recently Adobe gave me and other a year subscription to the creative suite for our participation here. I still have not installed anything but Photoshop, A while back I found a program that can create vector patf for black and white art work. It will not be as good as using something like illustrator. However vector paths can be edited in Photoshop and cleaned up some. Here is the PSD it 13MB because od the gradient http://www.mouseprints.net/old/dpr/AmPm24-7.psd -
Need a Report for a List of PO's against a Sales Order
Need a Report for a List of PO's against a Sales Order
Hi
We can get through Me2n, with selection parameters with account assignment as C (Sales Order)
Regards
Prasanna -
What is the type of cable do i need for a macbook white to connect to a hdmi cable?
what is the type of cable do i need for a macbook white to connect to a hdmi cable? This is quite a problem since macbook white is not in production anymore.
First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion or 10.8 Mountain Lion). When System Profiler comes up check the Model Identifier and post it back here.
The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV. -
Open of auto-white list failed
I have spent the last few days getting cyrus & spam assassin to filter junk mail properly, with some success finally. I have followed the helpful Frontline Spam Defense tutorial from Topicdesk.com and also checked permissions on /var/amavis, plus just about every other trick I could find on these fora (mostly thanks to pterobyte).
Although I have now significantly reduced the spam getting through, I am now getting an error in the system log which seems to imply that it cannot create the white list file (presumably from the emails that I have put into the notjunkmail mailbox?):
Dec 30 10:21:47 eddie org.amavis.amavisd[49]: auto-whitelist: open of auto-whitelist file failed: locker: safe_lock: cannot create tmp lockfile /var/amavis/.spamassassin/auto-whitelist.lock.eddie.waveneyrivercentre.co.uk.12 84 for /var/amavis/.spamassassin/auto-whitelist.lock: Permission denied
Contents of /var/amavis is:
amavis-20060719T174524-12574 amavis-20070930T043646-14035
amavis-20060905T092217-09995 amavisd.lock
amavis-20060905T095328-10092 amavisd.pid
amavis-20061007T085000-04020 amavisd.sock
amavis-20061007T085008-04039 clamd
amavis-20061023T192617-21733 clamd.pid
amavis-20061023T194248-21871 db
amavis-20061030T064013-20653 tmp
amavis-20061030T065355-20681 whitelist_sender
plus a load more amavis-number files earlier in the list. There is no .spamassassin file.
the /var/amavis directory itself has permissions as follows (output from stat)
234881026 86096 drwxr-xr-x 106 _amavisd _amavisd 0 3604 "Dec 30 10:34:20 2007" "Dec 29 20:55:37 2007" "Dec 29 20:55:37 2007" "Mar 21 00:28:17 2005" 4096 0 0 amavis
Well I hope that someone can help me.
Many thanksThanks David that is a great help
I have carried out the alterations as suggested in the link, we will see what happens.
Here is the output from ls -al /private/var/amavis:
total 32
drwxr-xr-x 106 _amavisd _amavisd 3604 Dec 29 20:55 .
drwxr-xr-x 43 root wheel 1462 Nov 26 11:14 ..
lrwxr-xr-x 1 _amavisd _amavisd 25 Feb 18 2007 .spamassassin -> /var/clamav/.spamassassin
drwx------ 6 _amavisd _amavisd 204 Feb 18 2007 .spamassassin.old
drwxr-x--- 4 _amavisd _amavisd 136 Nov 9 2005 amavis-20051109T091813-08106
drwxr-x--- 4 _amavisd _amavisd 136 Nov 9 2005 amavis-20051109T092204-08134
drwxr-x--- 4 _amavisd _amavisd 136 Sep 24 10:50 amavis-20070924T105049-17755
drwxr-x--- 4 _amavisd _amavisd 136 Sep 30 04:36 amavis-20070930T043646-14035
-rw-r----- 1 _amavisd _amavisd 0 Dec 30 20:10 amavisd.lock
-rw-r----- 1 _amavisd _amavisd 3 Dec 29 20:55 amavisd.pid
srwxr-x--- 1 _amavisd _amavisd 0 Dec 29 20:55 amavisd.sock
srwxrwxrwx 1 _amavisd _amavisd 0 Dec 29 20:53 clamd
-rw-rw---- 1 _amavisd _amavisd 2 Dec 29 20:53 clamd.pid
drwxr-xr-x 9 _amavisd _amavisd 306 Dec 29 20:55 db
drwxr-xr-x 10 _amavisd _amavisd 340 Dec 30 20:10 tmp
-rw-r--r-- 1 _amavisd _amavisd 3 Sep 27 05:43 whitelist_sender
and sudo ls -al /private/var/amavis/.spamassassin/:
total 33376
drwx------ 6 _clamav _clamav 204 Nov 1 09:26 .
drwxr-xr-x 11 _clamav _clamav 374 Dec 30 14:52 ..
-rw------- 1 _clamav _clamav 5271552 Nov 1 09:26 auto-whitelist
-rw------- 1 _clamav _clamav 1302528 Nov 1 09:26 bayes_seen
-rw------- 1 _clamav _clamav 10510336 Nov 1 09:26 bayes_toks
-rw-r--r-- 1 _clamav _clamav 1175 Feb 18 2007 user_prefs
does this tell us anything? the permissions for .spamassassin are ok I think? So would the changes I made have any effect on the server log message? I just checked the log and got another instance of it. Thinking about it, the learn script runs at 3:00 am or something so this log item is probably not connected to that script. So what else could be causing it?
Many thanks again
James -
In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.
When formatting your column to date/time, pick Date & time, and then pick the letter i in the circle to the right. Then scroll down and pick "No time"
Jason -
Application Control Policy white listing
How do I configure Application Control Policy white listing?
I can only get blacklisting to work.
If I create a policy to block *.exe and then allow all the windows executables it doesn't work.
It looks like wildcards don't work.Thanks Brent!
Note: It is possible to combine the Current ZESM product with Windows
Software Restriction Policies and get much stronger protection than
Software Restriction Policies alone. (Both Types of Policies are
deliverable via ZCM)
On 4/25/2012 11:46 AM, bbeachem wrote:
>
> That documentation refers to the old ZESM 4.1 product that is EOL.
> We're working to update that documentation. Application White-Listing
> is currently not supported in the ZESM version integrated into the
> ZENworks Communication Console. It is being researched for possible
> inclusion in a future revision.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
White list of computer part nx7400
Hi
Can somebody say mi what is in white list of bios of my nx7400 computer
I want replace some part and do not know what will be by white list disabled.
Or it is some possibility how to disable white list in my computer.
(I have version with drDos and use linux in it )
I want to change
wifi
disk
memory
Thank you for helpYes this one is about supported HW by HP but mini pc cart which is on white list now is not possible to by I wont to replace broken one to new from Hardware and software point of view it must work (PCI atandart ) I do not know what is from business reason in white list enabled if only ID o HW vendors or also ID of equipment.
=> it is possible to change device from same vendor to new one.. or it must be same type
Other possibility is that control is done on MAC address of wifi (there is hardcoded vendor and type)
1) I do not know mechanism of white listing (parsing PCI ID, MAC, DMI or other information or mechanism)
2) I do not know what is in white list and what will be disable.
3) I do not know how to force this (business only restriction)
For me is not necessary to have support fro HP for spare part (notebook have 4 Years after Guarani period)
But I wont to upgrade myself broken parts and information's this one I can not find.
And other point of view , there is software restriction to fix hardware problem ("buggy bios with white list")
Thank for you -
Recently upgraded my four PCs running Win 7 professional from Thunderbird 24.6 to 31.0. Now when I open an e-mail and read it, then want to return to the Inbox, I now need to click on the List Tabs at the top right side of the screen, then click on Inbox it means an extra step and extra Mouse movement. How can I correct that? If not, how do I revert back to my previous version of Thunderbird? George G. (USN-USAF RET) Much obliged for your time and effort.
Do you not close a tab after using it? If you close them, they can't accumulate.
I haven't seen any change in TB3.1 in the way tabs work here.
Older versions are available here:
https://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/
Choose your version, then your OS (win32 in your case) then your locale (en-us I would think). Finally, when presented with something like ''Thunderbird Setup 24.6.0.exe'', right-click it and choose "save link as", then after it has downloaded, double-click the downloaded file to run it and install Thunderbird.
You don't need to uninstall your newer version. Some add-ons may require help to locate their previous versions, compatible with what you've downloaded and installed; Lightning in particular comes to mind.
Maybe you are looking for
-
Flash file, clicks not working in one environment
Hi everyone, I have produced files using Captivate 2, that have output as .exe. These work perfectly across all of our sites, except one. The only issue with the site where the files are not working is: - Click box within the Flash file do not progre
-
Assign search help for a screen field in standard program?
Hi All, Is there any other way to assign search help to a standard SAP screen field? (to be precise i want to assign search help to Recipient field in table control of components tab in transaction IW32/IW31) I know we can do this by assigning search
-
After Effects CS4 error during render
The error appearing is as follows... After Effects: AEGP Plugin Media IO Plugin: Unknown Error! MediaIO2 error: 0x4 Not enough memory to complete this encoding ( 5027 :: 12 ) Now, my computer memory is very poor (1.98 GB RAM), however, I do not belie
-
How to separate joint Apple ID's account using different mails and passwords
How to separate joint Apple ID's account using different mails and passwords
-
Temporary Hand and Zoom tools not working occasionally in InDesign, PS and Illustrator
I have a MacBook Pro running OS X 10.8.5 and I'm using my Creative Cloud subscription of version CS6 for InDesign, Photoshop, and Illustrator. I periodically "lose" the ability to use the modifier key shortcuts ("Hand" and "Zoom") and so far the onl