Need license information

I check the following documentation:
http://download.oracle.com/docs/cd/B16240_01/doc/licen
se.102/b40010/toc.htm
And the price list:
http://www.oracle.com/corporate/pricing/technology-pri
ce-list.pdf
Those seems to be the license possible to purchase:
--Database Change Management Pack
--Database Configuration Pack
--Database Diagnostics Pack
--Database Tuning Pack
--Provisioning Pack
Question:
Does Enterprise manager grid control product itself
cost something?If you have an existing 10g Database Enterprise Edition license, you can use EM without any additional fee once you do not use any of the licencable management Packs.
EM grid control runs on a database and on ias. Do i
need license for that to?If you are installing it on a separate New Database instead of existing (licensed) database, then you may need to cover your second database/em license. You do not need separate license for the embedded iAS, but if you need to monitor another iAS, then you need to license the Pack for it

Similar Messages

Licensing information

Hello All,
I need licensing information related to all components SRM!.
Tried to search ,but did not get much.
Will be grateful to have as a reply or a document.
My questions are:
1. If we install all the components related to SRM viz. EBP,SUS,Bidding Engine,CCM,
LAC, XI,EP, BW and ECC also ofcourse -->Each component would need seperate license or as a bundle?
2. How the user licenses will be given for all these components?
3. If we have alreay have ECC in place will that benifit for SRM license?
4. If we decide to use EP hence SSO what will there be any benifit?
5. Any idea about remote counsulting charges?
The versions of components should be:
ECC 5.0
EBP 5.5
SUS 3.0
BI 7.0
XI 7.0
Helpful answers will be rewarded.
BR
Dinesh
[email protected]

Hello,
Thanks for replies.
@ Marcin -
Now to more specific point.
I had read on this forum that for Bidding engine yo can test the functionality without
seperate license on dev server. But for prod server Bidding engine you need to have a seperate
license.
Is it not correct then?
@ Ramki-
Should I assume that licensing procedure for components and users is highly flexible
and depends on the negotiations between SAP and customer.
Pl. respond.
BR
Dinesh

Need to know FWSM License information layout

Hi ,
I hope that you guys can help me to understand FWSM license information I'm a newbie on cisco firewalls
FWSM License information is as follows :
FWSM# sh ver
FWSM Firewall Version 3.2(2)
FWSM up 6 days 8 hours
Hardware:   WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz
Flash STI Flash 7.4.0 @ 0xc321, 20MB
0: Int: Not licensed        : irq 5
1: Int: Not licensed        : irq 7
2: Int: Not licensed        : irq 11
The Running Activation Key is not set, using default settings:
Licensed features for this platform:
Maximum Interfaces   : 256
Inside Hosts             : Unlimited
Failover                    : Active/Active
VPN-DES                : Enabled
VPN-3DES-AES      : Enabled
Cut-through Proxy    : Enabled
Guards                    : Enabled
URL Filtering            : Enabled
Security Contexts     : 2
GTP/GPRS               : Disabled
BGP Stub                 : Disabled
VPN Peers                : Unlimited
Serial Number: SAD114600SX
So it means do we have to purchase license for implementing FWSM in Transparent/Routed Mode.
Thanks

Hi,
To my understanding there should be no licensing requirement for using the FWSM in Routed/Transparent mode.
I think the licensing has more to do with the Max Interfaces / Security Contexts usually.
Heres one link to information about the FWSM
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/ps4452/product_data_sheet0900aecd803e69c3.html
One thing to note also is that FWSM is a Cisco product that is getting old. There is ASA Module that replaces the FWSM. We are moving to use ASAs instead of FWSMs.
Here are the information related to that from Cisco
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/eol_c51-699134.html
- Jouni

License information about SJDS5.2 and SJISW 1 2004Q3

In our environment SJDS5.2 and SJISW 1 2004Q3 is installed on Solaris 9 4/04 on two SPARC machines. We also use MMR feature.
Suddenly I am asked to get licensing information about these products in our environment which was actually installed and configured by another person who has left the company.
Can any one guide me about the licensing information related to these products? After going through this forum I could find some one mentioning like if we use solaris 9 then upto 200,000 entries are free. Is it about the number of users using the LDAP or something else?
Also we have valid support plan for these products from SUN.
Is it based on CPU? Any help on this will be appreciated.
SMV

Product license details are installed under a LEGAL root directory on disk as part of the installation. You can also alternatively go back to the download section and review the license at: http://www.sun.com/software/products/directory_srvr_ee/get.jsp
The free 200,000 entries you refer to (entries = objects, not users) are only for DS entries Enterprise Wide, those don't apply to DSEE and consequently don't give you free access to Identity Synchronization for Windows.
You need to go back to your Solaris entitlement to find the details.
Also you always have to subscribe a directory maintenance contract to get support, this is not covered under Solaris maintenance.
Directory maintenance contract are based on the total number of entries managed by you directory service. It is independent from you hardware deployment.

How to edit "license information for multiple logon" screen

hey gurus
i need to know how to edit or modify the 'license information for multiple logon" screen. this screen usually pops up when a user tries for a multiple logon to sap. We have activated the parameter 'login/disable_multi_gui_login' but we would like to modify the screen in such a way that only one radio button which says 'terminate this logon' should exist. we would prefer to remove the option of 'continue with this option and end any other logon'. Now i searched but i could not find anything to implement this so i am here and i need your advice and suggestions.
thanks in advance.
cheers.
nate

hey bernhard
many thanks for your reply..i appreciate your help. its just that its not explicitly mentioned we cant modify the screen in the note.
Is there any other note that specifically say so?
thanks for your time buddy.
regards

Oracle Apps Licensing Information

Hi All,
Where can I get Various installation and licensing options for oracle Apps .
Frequently I have to answer questions like this:
we are having Inventory+PO+Order Management.
Now we are looking at implementing ATO or PTO processes.
ATO is better option but would require WIP so we need following information.
With Oracle Inventory ,PO and OM full install , IS WIP available as Shared install. If yes can we use it without any additional cost.
If not what is additional licensing cost for WIP?
Cheers

Hi Robert;
>
Where can I get Various installation and licensing options for oracle Apps .
Frequently I have to answer questions like this:
we are having Inventory+PO+Order Management.
Now we are looking at implementing ATO or PTO processes.
ATO is better option but would require WIP so we need following information.
With Oracle Inventory ,PO and OM full install , IS WIP available as Shared install. If yes can we use it without any additional cost.
If not what is additional licensing cost for WIP?You can follow this for licensing,but i belive its better way to contact wiht your oracle local office or Log Sr for your lisence question.
PS: you can also follow:
http://www.oracle.com/corporate/pricing/sig.pdf
http://www.oracle.com/corporate/license/agreements.html?_template=/ocom/printocom
http://www.orafaq.com/wiki/Oracle_Licensing
Regard
Helios

I need the information for migrate businessobjects old version to xi R3

Dear All,
                  i need the information about migration for businessobjects old version to BO XI R3
                                            Thankyou,

Hi Gopal,
What is the version of the existing BOE which you are using?
Please find the link to download the Admin guide:
-Please go to Http://help.sap.com
-Click on BusinessObjects tab
-Select the product as BusinessObjects Enterprise.
-You will find some useful guides to download.
However you can find the steps to perform migration as follows:
u2022     Create a Back-Up of CMS database(System and Audit) of the existing system.
u2022     Create a Back_Up of "FileStore" folder located at ..\Business Objects\Business Objects 11.5\"
u2022     Create a Back_Up of complete registry.
u2022     If the Business Objects system is customized for AD authentication,SSO etc., create a Back-Up of files on which changes are made.
u2022     If there are any Service Packs or Fix Packs installed, uninstall them in the reverse sequence of version.
u2022     Uninstall the base install of Business Objects Xi Release 2.
u2022     Clean all the registry entries for previous install of Business Objects.
u2022     Restart the computer.
u2022     Create two new Databases, one for CMS System database and one for CMS Audit database.
u2022     Create two new DSN's under ODBC configuration to point to the new Databases.
u2022     Install Business Objects XI 3.1 and while installing point the CMS to the new databases.
u2022     When the installation completes, stop the Server Intelligence Agent(SIA).
u2022     Right click and open the properties of SIA.
u2022     On the settings of CMS System database configuration, click specify.
u2022     Use "Copy from another Data Source" to migrate data from previous database to new database.
u2022     If the SIA fails to start, create another SIA and point it to the new Database with the migrated database.
u2022     Click on update objects and then start the SIA.
u2022     Login to "Central Management Console(CMC)" using Enterprise "Administrator" account.
u2022     Verify the License of Business Objects XI 3.1.
u2022     If the servers are showing disabled under CMC, enable all the servers.
u2022     Restore the "FileStore" folder to location "..\Business Objects\Business Objects Enterprise 12.0\".
u2022     If any report is missing database credentials, provide them and the reports will run ok.
These steps are for the BOE XIR2 and BOE XIR3. However you can also be useful for too.
I hope this helps you.
Regards,
Prashant

Oracle weblogic 10.3 license information

We have purchased Oracle weblogic 10.3 from a vendor and have installed by the application team. I need to confirm how can i check the license information (information reg no.of users etc) after installation of the product in the windows server 2008. Is there is any log file which will have license details??

Oracle has removed the licensing which is bound to IP addresses long before itself.
From WebLogic Server 10.3 and higher, no license file (no license.bea) is required by Oracle. However, you should deploy the product only in environments which are bounded to your license. That is you should see that if you bought license for 8 cores, you are deploying it only in a 8 core environment and not more.
There are few notes on the support site related to this.
Regards,
Atheek

Clusterware Pricing and/or Licensing Information for 3rd Party Applications

Hi,
Can anyone please direct me to Oracle Clusterware 11g pricing and/or licensing information in the scenario where the Clusterware solution is intended for use with a 3rd party application and not with Oracle Database?
Also, in the case where Clusterware is used with Oracle Database 11g Enterprise, does it require a separate license?
I appreciate if anyone can provide me with a link to this type of information.
Thanks in advance!
Best regards,
Johan

OK - So if there is no RAC installed and you all you need to do is provide Cold failover for an Oracle database instance then yes the Clusterware license is at no charge in this scenario.
briefly :
you install a Clusterware home - as if you were goin gto create a RAC database
then you install a database software home on each node.
then you create the instance.
there is a good paper here : http://otn.oracle.com/clusterware
See : Using Oracle Clusterware to Protect A Single Instance Oracle Database 11g (PDF) February 2008
If the software you are wanting to protect 'talks' to an Oracle database
You can either install on the RAC nodes - using the clusterware that is already there
OR
install Oracle clusterware onto 2 or 3 or more new nodes to build an new application cluster and then install your application.
Either way both meet the terms of the license doc.
Philip...

NTSVC.OCX license information

Hi,
I would like to get the licensing information of the sample control NTSVC.OCX. As per http://support.microsoft.com/kb/170883 it's a sample control that was provided with the January 1997 edition of the MSDN.
By any chance does it fall under Ms-LPL like the other MSDN samples and examples do or it's just under EULA?

Vikas, your question isn't about TechNet, so I'm going to move it to off topic. I think what you're asking is what the licensing terms are for something that Microsoft provided for free in 1997. We don't host the 1997 libraries any more,
and we are unable to pull copies of them. This is just a guess, but it seems likely to me that 1997 predates the existence of something like MS-LPL, but I really am not any sort of authority on it. Hopefully others can chime in with advice for
you as well. A number of smart folks review the off topic forum for questions like yours.
Thanks,
Mike
Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support

EIM License Information in DB

I need to know the table name where i can find the all the license information for EIM server, including number of agents, its expiry date and features except License file.
Does any one have idea.

Thanks for the answer about CMB. Just one thign i tired to install it in my Lab on EIM server and it although it installed succefully with out any error but after completition of installation it gave some .Net error i tried to debug that error but neither it appear in debug mode nor i could stop its debuging. So i re-install it.
I got one very good link relted to EIM / WIM server's services as well License that will definately help me and may be you already know about this link. Through this i don;t need to get into DB for license info as well each process info.
http://docwiki.cisco.com/wiki/EIM-WIM_Processes_on_each_server
Now another question i trying to find its answer is can we use 2 separate EIM/WIM and CMB solutions with single UCCE.

Registry cleaner/defrag wipes out license information, how to fix?

I bought the product after the 30day trial and installed the license key when I received it after purchase verification. Every time the registry defrag/cleaner runs, the product warns me the trial time has expired. I enter the license again. Sometimes I feel this happens when the defrag has not run.
I did on line chat with technical service and that was utterly useless. The directed me through a process I've already done at least 38 times.
If the registry cleaner is the problem, I would have thought a product of this caliber would be more robust to that type of operation.
Regards,
Hank Sundermeyer
Newark, DE
Acrobat XI Pro
Processor: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz 3.40 GHz
Installed memory (RAM): 16.0 GB
System type: Window 7 Professional 64-bit Operating System

Hi HankSundermeyer,
There does not seem to be a need to defrag or even clean the registry in 7. What was once an important maintenance task in 2000 and XP is now not necessary, as the system does take care of itself, it's simply designed better. At the same time the cleaners and defraggers will suggest deleting lots of stuff from the registry.
Unless you are actually able to tell what those registry keys are and why would you want to delete them, I recommend staying away from any such cleaning action. The benefit of the cleaning is doubtful, while the potential for error is rather large.
At the same time thanks for bringing to our notice that the registry cleaner wipes out the licensing information for Acrobat.
Please let me know which 'Registry cleaner' software you are using as I would like to replicate the issue here at my end. Personally I have used ccleaner and have not faced any such issues.
Further you can also raise a bug report by filling the form : https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Install Disk for Windows XP/License information 3000 V100

My hard drive is having some problems. It is working but my paging file is not working. Once my ram is used up my system starts having resourse problems. I have ordered a replacement hard drive. I will try to reimage my hard drive but I am afraid it won't reimage properly and will have to reinstall XP professional. Where do I get the original operating system software? My original license information on the bottom of my Lenovo 3000 V100 have rubbed off. So where can I get the install disk or software for XP professional and also get all of my original license information?
Thanks
Greg

Instructions, not a question.

New to SAP PI, I need more information on SAP PI Topics

Hi Guys,
I'm New to SAP PI, I need more information on SAP PI Topics which are related to Development and configuration.
i have gather some information please add more topics and major scenarios if i missed out.
SAP PI Topics:
1.     Mapping
u2022     Standard Functions
u2022     User-defined Functions
u2022     Message Mapping
u2022     Multi-Mapping
u2022     Java, XSLT mapping overview
2.     Business Process Management
u2022     BP Modeling
u2022     BP Engine
3.     Design and Configuration
u2022     System Landscape Directory
u2022     Enterprise Services Repository
u2022     Integration Directory
4.     Runtime
u2022     Integration Engine
u2022     Different installations of Adapter Engines
u2022     Runtime Workbench / Monitoring
u2022     Architecture
5.     PI as Component of SAP NetWeaver
u2022     Positioning
6.     Overview and Basic Concepts
u2022     Adapters & J2EE Adapter framework
u2022     Business Process Management
u2022     Mapping
7.     Adapters
8.     Technical Connectivity for communication with SAP and non-SAP systems
u2022     File/FTP(S) (File Systems / FTP Servers)
u2022     JDBC (RDBMS systems)
u2022     JMS (Messaging systems, e. g. MQSeries, SonicMQ)
u2022     SOAP (Web Services based on SOAP)
u2022     WS-RM (Web Services based on WS Reliable Messaging)
u2022     HTTP_AAE Adapter
u2022     Plain HTTP(S)
u2022     Mail (Mail Servers via SMTP, IMAP4, POP3)
u2022     SAP Business Connector (SAP BC)
u2022     Marketplace (SAP Marketplaces)
9.     Application Connectivity
u2022     RFC
u2022     IDOC_AAE Adapter
u2022     IDoc
u2022     Proxy (ABAP and Java)
10.     SAP Industry Business Packages (contain adapters and content)
u2022     RNIF 2.0 (RosettaNet)
u2022     RNIF 1.1 (RosettaNet)
u2022     CIDX (RNIF 1.1)
11.     Advanced Adapter Engine Extended u2013 AAE
u2022     PI as Infrastructure for Service Oriented Architecture (SOA)
SAP PI Scenarios:
u2022     SOAP to JDBC scenario
u2022     RFC to FILE scenario
u2022     Multiple IDOC's to File scenario
u2022     File to File scenario
u2022     File to RFC scenario using BPM
u2022     File to JDBC scenario
u2022     Idoc to File scenario
u2022     Abap Proxy to XI scenario
u2022     Idoc Flatfile to Idoc XML Scenario

You may search for all basic topics on SCN and you will get required information. Such basic questions should be searched before posting. Thread locked.
Regards,
Prateek Raj Srivastava

I need the information to send to my IT people to transfer my copy of Adobe X pro to the new computer case number: 0215291791

I need the information to send to my IT people to transfer my copy of Adobe X pro to the new computer case number: 0215291791

Hi Scott ,
You need to deactivate your product from the old machine and then activate the same on the new one.
For deactivation Click Help>Deactivate.
You may also want to refer to the following link to get more information regarding activation and deactivation of your product.
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
To Activate the product on your new system please get in touch with the Adobe support team.
http://helpx.adobe.com/x-productkb/global/service1.html
Regards
Sukrit Dhingra

Need license information

Similar Messages

Maybe you are looking for