Need link between Equipment- class- characteristics- values...

Hi Guys,
As per the customers requirement I have to list down all the equipments along with the respective corresponding values. The equipments are linked to the Characteristics by class type and class and then characteristics and then the the values that are assigned.
I am aware that the characteristics and the values are saved in the CABN and CAWN table and the link between them us the internal number.
Can any one please suggest me if there is a way to find a table link for equipment which are assignd to a Class type and hence a class and then these characteristics in CABN and values in CAWN.
Thanks in advance.
Anoop

Plesae post your question in the appropriate forum -- this is for Asset Accounting.

Similar Messages

  • Equipment, classes, characteristics, values

    Hello,
    I'm trying to list out all equipments that have classes assigned to them and i also want to see which characteristics and values are valid for that equipment. I want to have that in one overview.
    transaction CL6BN comes very close, but i can not make a download from that transaction to excel (at least i can not find the option)
    Does anyone know a transaction or table (table join) where i can find the needed information?
    Thanks in advance for your help
    Kind regards,
    Peter

    Hello Riyaj,
    Thank you for the swift reply. It seems like a good solution. When go to the menu option i get the pop-up with the following classes:
    AP06
    P0103
    AP01
    P0101
    AP05
    F0102
    F0101
    P0106
    P0108
    P0109
    P0112
    AP03
    P0105
    AP04
    CE01
    G0101
    G0102
    G0103
    Does this mean that of all the equipments in the list, only these classes are applicable to those equipments? I can not imagine, because if i check the class list, 182 equipment classes are supposed to be assigned...

  • LInk Between Equipment & calss type

    hi! All
         is there any Link between Equipment no. and Class type of it. Bz i need to fetch the class type for a Equipment No. to fetch its class attributes details.
    Thanks and Regards,
    Kv

    Hi Kv,
    AUSP - Character values
    KSML - Character of a class
    KLAH - Class Header
    KSSK - Object to class
    CABN - Characteristics
    KLAT - Class Header text
    EQUI - Equipments
    EQUI - Equipment time segments
    EQKT - Equipment texts
    try to relate these tables with OBJEK, CLINT, ATINN, EQUNR, HEQUI, IMERK
    The link goes linke this,,,
    EQUI-> KSSK->KLAH>CABN/KSML->AUSP.
    here OBJEK = EQUNR
    Hope this helps..
    Thanks & regards,
    Dileep .C

  • Link between documentation for chars value and chars

    Hi,
    we need to find out sap transaction or report for link between documentation of chars value and chars.
    we know for specific chars through CT04 and going to VALUES sub-tab then selecting perticular chars value and clicking on the documentation for value.

    Go to transaction CT10 and select display option 'Allowed values'. You will have the characteristics along with their values.

  • Table Link between Equipment and Sub-equipment

    Hi all
    My requirement is this
    I have one mobile set with a serial number. for that mobile set i have one battery with a serial number, now i want to link both the serial numbers, one as main and another as sub item
    I tried by maintaining the battery serial number as sub-equipment in the main mobile set equipment number master,
    Let me know the table link between equipment and sub-equipment
    I want a report based on the input mobile set equipment number what are all the sub-equipment associated with the main equipment
    Also suggest is there any other approach,
    Regards
    Amuthan M

    Hi
    EQUZ is the table,if u give the sub equipment in equipment field and execute.you can find the main equipment in superior equipment field

  • Establish the link between equipment and its standby equipmnent

    Dear experts
    How to establish the link between equipment and its standby equipmnent in SAP?
    For example, I have one pump in a plant and also i have a standby pump installed next to it...now i would like to establish a relation between these two inorder to track them.
    I tried linking them as subequipments, but logically that is not sub equipment.
    what is the best way to do it?
    Regards

    Praveen,
    Equipment & Standby equipments are  installed on same Function location.
    There are below workarounds for solutions.
    1. Use Position Number
    2. Use A,B,C indicator with Running & Standby status
    2. Use link if it is applicable.
    3. Use classification system & provide characteristic as Running / Standby
    Further u can assign the System condom which is equivalent to equipment running  or stop condition during transactional data creation like order..
    If it is running it indicates it is working.
    If it is in stop condition then at that time it is in standby mode.
    Thanks,
    Ramesh

  • Link between equipment and items in stock

    Hi Expert
    I work on maintenance, and I would like to create a link between the equipment and items in stock PDR
    what is possible without going through the nomenclature article
    Thanks

    yahya el hammami,
    Investigate maintenance [Bills of Materials|http://help.sap.com/erp2005_ehp_04/helpdata/EN/c4/e51386a2f211d19dae0000e8323350/frameset.htm] (BOMs)
    PeteA

  • Read Document Class Characteristics Values (Class Type 017)

    Hi Gurus,
    I want to read values of Document Class Characteristics (Class Type 017).
    Is there any Functional Module available for this?
    Best regards,
    Abir.

    Hi ,
    Use this BAPI   BAPI_DOCUMENT_GETDETAIL2 to get the details of class and char values for particular documents.
    kindly enter the data about the DIR and mark the ent
    DOCUMENTTYPE                  DRW
    DOCUMENTNUMBER            2000
    DOCUMENTPART                 000
    DOCUMENTVERSION            00
    GETOBJECTLINKS                       X
    GETCOMPONENTS
    GETSTATUSLOG
    GETLONGTEXTS                          X
    GETACTIVEFILES
    GETDOCDESCRIPTIONS               X
    GETDOCFILES                             X
    GETCLASSIFICATION                    X
    GETSTRUCTURE
    GETWHEREUSED
    HOSTNAME
    INHERITED
    Here whatever marked as a 'X' BAPI will return the values for particular DIR.
    Use TCODE SE37 for executing this BAPI or get the help of your technical person.
    Regards
    Abhiji A. Pachgade

  • Equipment - Class Characteristics restriction

    Hello,
    I would like to get some insight and the way of proceeding further for the below requirement. We have two characteristics defined in CT04 for Equipment - Manufacturer and Model Number.
    Example
    Manufacturer can have values like ABC, XYZ, JUO.....
    Model Number can have values like 123 Model, 124 Model, 125 Model. 126 Model
    My first requirement is - I need to have defined the Manufacturer and Model Number in tables, and refer that custom table in CT04 (I think I can use value check against table) option. Is this is the correct way?
    My second req is - For example if I choose ABC from Manufacturer then only 125 Model and 126 Model should show up on Model Number Characteristic - how to achieve this? I have given an example of values here, but in runtime it could be dynamic, so not sure how to write Dependancy here
    Any help is much appreciated!
    Regards,
    Justin.          

    Hi Justin,
    For your first requirement - Yes, you can use the option check against table but only drawback here is that the table you are referring should have one primary key and not more than that(Check this).
    Second requirement - If you have two characteristics for manufacturer & model, then this not possible. Instead you can have one characteristic for both and maintain model numbers as sub-characteristic values for each of the manufacturer value.
    Regards,
    Ravi

  • Link between sales order & characteristic values

    I have the requirement for giving the values of the characteristics for the particular sales order.The item in sales order is KMAT.
    Can anyone help me with the Dictionary tables?

    hi,
        SELECT SINGLE cuobj FROM inob INTO l_clobjectkeyin
        WHERE klart = l_class AND
              objek = l_matnr AND
              obtab = l_obtab.
        l_klart = l_wa_alloclist-classtype.
        l_objek = l_clobjectkeyin.
        CALL FUNCTION 'CLFM_SELECT_AUSP'
          EXPORTING
            mafid
            ='O'
            classtype = l_klart
            object    = l_objek
          TABLES
            exp_ausp  = l_tab_ausp
          EXCEPTIONS
            no_values = 1
            OTHERS    = 2.
      READ TABLE l_tab_ausp INTO l_wa_ausp WITH KEY atinn = l_atinn.
      MOVE l_wa_ausp-atwrt TO g_wa_final-zzp_kmat_id.
      PERFORM get_characterisitics USING c_chr_nam_002.
      READ TABLE l_tab_ausp INTO l_wa_ausp WITH KEY atinn = l_atinn.
      MOVE l_wa_ausp-atwrt TO g_wa_final-zprogram.
      PERFORM get_characterisitics USING c_chr_nam_003.
      READ TABLE l_tab_ausp INTO l_wa_ausp WITH KEY atinn = l_atinn.
      MOVE l_wa_ausp-atwrt TO g_wa_final-product_type.
    hope this code helps..
    thx
    rams

  • Link between Equipment

    Hi All,
    I have a scenario like this one logical equipment is connected to different equipments which are in different functional locations.
    If I want to do the maintenance on logical equipment I need to know which equipments are connected to this equipment.
    Please suggest me how to do it in SAP
    Thanks in Advance
    SSK

    SSK,
    To be frank I did not implement Object networking as I have not come across requirement. But I tried this in IDES for a Demo purpose for just half a day.
    I guess your requirement can be easily met Object networking...
    Please investigate this [Object networking |http://help.sap.com/saphelp_47x200/helpdata/en/b0/df293581dc1f79e10000009b38f889/frameset.htm] and try.
    Let's wait for reponses from our peers ...
    Would be great if you post the steps / Pros and Cons in this... May help others...
    Babu

  • Item Class ,Characteristics Value Change.

    Hi ,
    Is any Std SAP transaction present which will allow me to change the values of Characteristics assigned to Item of Notification ( PM/CS) through classification tab functionality.
    Riyaj

    Riyaj,
    Can you please give more details of your issue
    PeteA

  • Equipment Class Table

    Hi,
    I would like to ask what are the tables related to equipment class? When I go to IE03 then enter the equipment number and click classfication, there's a class number for that equipment. I'm using tables EQUI, EQUZ but I don't know what and how these tables will be linked to equipment class number. Your response is highly much appreciated.
    Thanks a lot!

    Hi,
    If you want to get the characteristic values from the equipement class->
    Try EQUI-EQUNR as OBJEK of AUSP table and
    Also use EQUI-CUOBJ in IBIN-INSTANCE - > IBIN-IN_RECNO to IBINVALUES-IN_RECNO
    then IBINVALUES-SYMBOLID to IBSYMBOL-SYMBOLID.
    You can also use BAPI 'BAPI_OBJCL_GETCLASSES'.
    Thanks,
    Anmol.

  • Link between maintainance order reservation and pur requisition

    Dear Experts,
    I need link between maintainance order reservation number against a materials and purchase requisition raised against it.
    Basically requirement is that i need a report in which i can c the purchase requisition against the materials of maintanace order..
    Please help me out
    Regards,
    Vishal

    hey somebuddy will plz help me out ...

  • Link between Class and characteristics created for that class

    Hi All,
    Is there any table that I can look at to find a link between class and the characteristics created for that class. For all the list of characteristics created I am refereing to CABN table but my requirement is to find the logic to see all the characteristics created for a class. Can anyone suggest me the right table to look at?
    Regards,
    Shane

    Hi,
    I would like to thank you for your quick response. So based on your thoughts, here is the process i followed to find the characteristics for a existing class,  took the Internal class number and used the KSML table to find all the Characteristics created for that class.
    To find the list of values assigned to that characteristics, used the AUSP table for that characteristics internal number.
    Thank you again for your inputs
    Shane.

Maybe you are looking for