Need link to LabVIEW 2011 SP1 Windows 32-bit download

I have been looking for the link to LabVIEW 2011 SP1 Windows 32-bit download for an hour.  I thought it might be incorporated into the SP1f2 version.  Nope. SP1f1 version. Nope.  The ni.com search can't find it, Google can't find it, I am stuck.
Certified LabVIEW Developer
NI-VLM Administrator
Solved!
Go to Solution.

That I did not know. I guess the other question is even if you do have a right to the older version, would they not show up if you are not logged into NI.com at the time?
I would've figured that if you didn't have rights to a version, then you wouldn't be able to activate that version once you installed it. That you'd be left in evaluation mode. I didn't think that the website would block an attempt to download it.
EDIT:
I see that if you are not logged in, it says:
"Need previous versions? Access your SSP benefits by logging in."

Similar Messages

  • Bug report: on LabVIEW 2011 SP1 and Windows 8 'Open URL in default browser.vi'

    Dear colleagues,
    Here is a bug report.
    Culprit: 'Open URL in default browser.vi'.
    System: Windows 8, Professional. LabVIEW 2011 SP1.
    Abnormal behaviour and steps to reproduce:
    Above mentioned VI doesn't work when LabVIEW was started with administrator privilegies. And it works as expected when LabVIEW running in normal (non-administrator) mode. 
    Looking forward to see this fixed.
    Best regards,
    Igor Titov.
    CLD.
    =========================
    Igor Titov, CLA
    WebPager - put LabVIEW front panels into the web page
    Labicom.net

    Hi Igor,
    Unfortunately LabVIEW 2011 SP1 does not support Windows 8. I tested this behavior with LabVIEW 2012 SP1 on Windows 8 and everything worked correctly. 
    Regards,
    Jeff Peacock 
    Product Support Engineer | LabVIEW R&D | National Instruments 

  • Only have LabVIEW 2012. Why am I asked to download LabVIEW 2011 SP1 f2 RTE Patch?

    Hello,
    I recently got a new machine (clean install of Windows 8), and installed LabVIEW 2012, with no other previous versions. However, when I ran the NI Update Service, it listed "LabVIEW 2011 SP1 f2 R(32-bit) Run-Time Engine Patch" as a critical update.
    I'm confused; did I accidentally install LV 2011 too?
    Thanks
    Solved!
    Go to Solution.

    Also, some addons use older RunTime Engines.  It is not suprising that you need the 2011 RTE patch.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Error -1074397038 occurred at IMAQ Start.vi for 64bit Labview 2011 SP1, Win7

    Hello,
    I am using a MC1362 camera from Mikrotron with a PCIe1433 framegrabber. I was using it with windows XP, 32 bit, labview 2010 SP1 32 bit, it was working perfectly fine. I just switch to windows 7 with labview 2011 SP1 64bit, and it is not working anymore with my custom routine in labview, though it works with MAX and camera file generator and I use the same camera file.
    When I run my routine, I have this error message:
    Error -1074397038 occurred at IMAQ Start.vi
    Possible reason(s):
    NI-IMAQ:  The requested serial termination string was not found in the returned buffer.
    Then, If I try to run the camera with MAX, it doesn't work anymore, I have to reboot the camera, and put it in the right mode with the Mikrotron control tool to obtain an image.
    I have seen similar issue on a Basler camera on the forum, and it has been solved by using a camera file to set the different parameters. There is no camera file complete to set all the parameters of the camera, so I had to program them in serial to drive the camera with my Labview routine.
    Could you help me to solve this issue please?
    Thanks
    Bests
    David Dulin

    This forum post is already handled --> SR 1154262.
    Kind regards,
    Corné Westeneng
    Applications Engineer
    NI-Netherlands

  • Bug (LabVIEW 2011 sp1 crash)

    Bug (LabVIEW 2011 sp1 crash)
    1) Open LabVIEW
    2) Blank VI
    3) Front Panel / View / Class Browser
    follow exactly this :
    Class Browser / Object library ---> select "LabVIEW Classes" ---> and then clic "Search"
    result : The window "Class Browser Search" opens ----> do nothing ... just "Cancel"
    back to the window Class Browser ...
    Class Browser / Object library ----> now select "DAQmx"
    result : in the window Class Browser : Objet library = DAQmx
                                           Class         = DAQmx buffer
    don't touch anything else (!)
    and now clic "Search" ... LV CRASH

    When you meet your colleagues, could you ask them, of course when they have time, to create this number.
    This will make me happy,  and this would be a small reward      for this bug report.
    Thank you very much in advance ThiCop

  • Labview 2011 et windows 8

    Bonjour
    Labview 2011  et windows 8 sont-ils compatibles?
    sinon quelle sont les les versions compatibles
    Cordialement
    Robert Papanicola
    http://sciences-indus-cpge.papanicola.info/
    http://www.medicalistes.org/~maxime-plus/

    Hello Robert,
    La plupart de nos produits sortis cet été sont compatibles Windows 8 (à quelques exceptions près). En ce qui concerne LabVIEW, 2011 n'est donc pas compatible, comme le montre ce document !
    Cdt,
    Eric
    Eric M. - Application Engineering Specialist
    Certified LabVIEW Architect
    Certified LabWindows™/CVI Developer

  • What i need to migrate portal EP 7 windows 32-bits to windows 64-bits

    Hello,
    What i need to migrate portal EP 7 windows 32-bits to windows 64-bits.
    database ORACLE 10.2.0.2.
    thanks

    Hello,
    i see this step in system copy installation guide.
    can i do this without do a hetgenreous system copy ?
    Windows Oracle: In chapter "Generating the Control File Structure" of the system copy guide for the database specific system copy procedure, add the following information as Step 1:
    If you want to migrate your database from 32-bit to 64-bit or vice versa, add the following lines at the bottom of the control.sql file for Oracle 9.2 or Oracle 10.2:
    Oracle 9.2: shutdown immediate
    startup restrict
    spool utlirp.log
    @?/rdbms/admin/utlirp.sql
    spool off
    alter system disable restricted session
    Oracle 10.2 shutdown immediate
    startup upgrade
    spool utlirp.log
    @?/rdbms/admin/utlirp.sql
    spool off
    Shutdown immediate
    Startup
    Spool utlrp.log
    @?/rdbms/admin/utlrp.sql
    Spool off
    exit

  • Need links to open in different window

    Please forgive my outrageous ignorance with respect to
    webpage design/development and especially Dreamweaver CS3. I
    created a very basic website in Microsoft Office Publisher 2003 and
    I have it up and running (www.ftembroidery.com). It is my very
    first attempt at making a website.
    The purpose of this page is not so much to make sales over
    the internet, although some of our repeat customers do contact us
    and order via the internet. The purpose of our page is to be able
    to talk with our customers on the telelphone and guide them to
    various products in the catalogs we have linked. Basically we're
    handing them a stack of "electronic" catalogs from a handfull of
    our suppliers so they can decide what to purchase.
    I would like these "catalogs" (links) to return to OUR
    website if the viewer closes the page. Currently, they do not. If
    you close the window of one of the catalogs, you shut down
    everything. I believe that means the catalog links need to open in
    a new window. If I am correct in that belief, how do I
    change/correct my webpage to do that?
    Once I have done that, I will have time to learn more about
    webpage design/development and how to use the Dreamweaver CS3 that
    I just purchased.
    Thanks in advance for your help, remembering please to be
    very clear and specific because of my lack of knowledge and
    experience.
    Nick

    Check out this site - WWW.ITKONG.COM.
    Focused solely on the community of IT specialists, web
    developers, technological experts, companies and individuals alike.
    Currently we are up and running in our beta phase, taking
    care of final minor bugs tightening loose screws and slowly getting
    the word out about our existence.
    I hope it is of some help and we welcome your feedback.
    Team ITkong

  • Labview 2011 SP1

    Just wondering if anyone knows if\when Labview 2011 service pack will be available?  Have just got the cds for 2011 from it department, but realising that they often release a service pack in feb so don't want to waste a day installing the original on machines only to have to remove it again.
    Solved!
    Go to Solution.

    Service Packs do generally get released, but NI don't pre-announce them. Installing LV2011 before the Service Pack isn't a big deal, you certainly don't need to "uninstall anything" before putting the Service Pack onto your computer. If you are including any addons or toolkits, these are generally not updated in the service pack so there are a number of good reasons to go ahead and put 2011 on your machine now.
    Thoric (CLA, CLED, CTD and LabVIEW Champion)

  • Does LabVIEW 2011 SP1 make such a big difference?

    These are my working build specification in LabVIEW 2011
    Any idea?
    Solved!
    Go to Solution.

    First I spend time to upgrade to 2011SP and after update, when I find out about broken build specification. I started to question myself is it really worth spending time to upgrade?
    BTW, the issue is resolved. How I have no idea. For the first 2 times I opened the project, the build specification was broken and third time I was correct. Luckily I did not save the project first 2 times.

  • J2SE 1.4.2 for Windows x64 bit download link

    Dear All,
    Can any one give me the link to download J2SE 1.4.2 for Windows x64 bit architecture?
    Your help is highly appreciated.
    Regards,
    Syed

    There should be no issues with using SAP JVM from the start.
    Probably no notes because is straightforward:
    - Extract the SAP JVM (e.g. c:\sapjvm_4)
    - Set JAVA_HOME (c:\sapjvm_4)
    And start installation as per guide.
    We have done this recently with Solman 7 EHP1 and NW 7 EHP1 (J2EE stack).
    We did have issue on central instance install where the J2EE instance would not start part way through installation (server0 continually crashed and restarted with memory issues) so we had to adjust the instance settings as per SAP Note#1603093, before retrying in SAPINST and continuing.
    We had this problem with both Solman & NW 7 EHP1.

  • Need program in labview to generate 8 control bits using DAQ

    Hi,
               8 bits are to be generated using NI USB base myDAQ card and virtual instrument developed in LabVIEW 8.6.
                                                                  could someone send me a labview program for generating control bits.

    Homework?
    Have a look at the examples shipped with LV.
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

  • Print text file with labview 2011 and windows 7

    I am having some strange problem, hope someone out there knows the solution.
    We have a labview program running under windows xp, the program runs some test and print label from a local label printer. Last week, I have to upgrade the computer to windows 7 and all the sudden the printer will not print any more.
    The print vi is very simple. I am using the report function and I am attaching the diagram of that vi below. 
    If I use windows notepad to open that small text file, I can print fine. This means the printer driver itself is OK. However, if I print the same text file through Labview printing vi, from the printer's task list, I can see it does not recognize the char. From the attached png file, the top one is the task from notepad, it shows 2 pages and the bottom one is from the labview, it becomes 33 pages. 
    For the printer part, I use Generic / Text Only printer driver which comes from windows itself. And I am aslo attaching a sample of the text file, there are quite a lot of special char, it is for print bar code. When I tried to use labview print text vi to print general text from my computer to a regular printer, the vi works. So it seems Labview print can not handle the special char? Although it worked many years under windows XP in the past.
    Welcome to any suggestions!
    Thanks
    Attachments:
    print vi.gif ‏9 KB
    labview print bug.png ‏26 KB
    SerialLabel.txt ‏1 KB

    DGU wrote:
    where to check RAW or TEXT? the print report vi only asks for file name and printer name.
    When I print from notepad, everything just goes by default. This is a label printer, so I never need to specify printing parameter such as size, orientation, etc in the past
    Famous last words go something like this: "...never had to do that before."  Maybe you have to do that now.  It's worth at least comparing the defaults settings for bothe generic drivers.  It could save you a lot of headache if you notice something different.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • Bug Légende Graph Labview 2011 Sp1

    Bonjour à Tous,
    Je ne sais pas bien ou l'on peut faire un bug report alors je post ici.
    Ci joint le VI qui pose problème. La propriété Graph -> Légende -> Nombre de lignes ne fonctionne pas correctement lorsque le tableau est horizontal.
    Pièces jointes :
    Bug légende Graph.vi ‏20 KB

    Kriss,
    Merci pour ces précisions. Lorque le tableau est horizontal il n'est composé que d'une seule ligne, c'est pourquoi on récupère la valeur 1. Le noeud de propriété définit bien le nombre de lignes dans la légendes des tracés et non le nombres d'éléments.
    Constates-tu bien le même comportement que moi? (A savoir nb de ligne=1)
    Cordialement
    Jean-Baptiste C.
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    >> Téléchargez dès maintenant toutes les présentations techniques !

  • 10g windows 32 bit download

    Is there a better way to download the above version as it goes for some time and then times out.

    We recommend the use of a download manager, such as getright (getright.com; free)...
    Regards, OTN

Maybe you are looking for