Need Logic for Inserting data into table from another table

Hi,
Could you please give me some logic on below:
TABLE_A has columns A,B,C,D
What i did
==========
Created new table
TABLE_1_A with columns A1,A2,B1,B2,B3
Requirement
===========
I should populate columns A1,A2 (table TABLE_1_A) with the data from column A (table TABLE_A)
& simillarly populate columns B1,B2 with the data from B.
the data is huge in the table_a.
Database: 10g
Thanks.

Hi,
Here's one way:
INSERT INTO table_1_a
        (a1, a2, b1, b2)
SELECT      a, a, b, b
FROM      table_a
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
If you're asking about a DML statement, such as INSERT, the sample data will be the contents of the table before the DML, and the results will be state of the changed table(s) when everything is finished.
Explain, using specific examples, how you get those results from that data.
See the forum FAQ {message:id=9360002}

Similar Messages

Create a new table from another table that exists ussing a stored procedure

Hi,
I want to know if is posibble to create a new table from another table that exists ussing a stored procedure. This new table is created from other table that exists in the DB.
(in the next code the table tbl1 exist into the schema of the DB, but temp_tbl1 does not exist, it must be created by the procedure)
create or replace procedute temp is
temp_tbl1 tbl1%TYPE; //the temp_tbl1 will have the same type of tbl1
begin
create table temp_tbl1 as (select * from tbl1);
end temp;
thanks very much

cat wrote:
Hello,
I think my problem is not about this grant, because if I execute this as an "anonymous procedure":
DECLARE
BEGIN
EXECUTE IMMEDIATE 'CREATE TABLE Abonus (id NUMBER, amt NUMBER)';
END;
It runs ok
But if I do:
CREATE OR REPLACE procedure temp as
BEGIN
EXECUTE IMMEDIATE 'CREATE TABLE Abonus (id NUMBER, amt NUMBER)';
END;
I have the error
ORA-01031: Insufficient privileges
ORA-06512: at "temp", line 3Anonymous blocks are treated as "Invoker's Rights" from a privilege perspective whereas stored programs by default are treated as "Definer's Rights". Therefore using anonymous blocks is not a valid test to check this.
The simplest form of checking this issue is by executing
SET ROLE NONE;and then to run your statement/code block in question interactively. Using this approach you get in your session the effective rights of a "Definer's Rights" stored program, i.e. only privileges that you got granted directly to your user.
You can revert to the default setting by issuing
SET ROLE ALL;For more information regarding this topic, read e.g. the documentation:
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28370/subprograms.htm#LNPLS00809
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Create table from another table including constraints

Hi,
Is there a way to create a table from another table including constraints.
CREATE TABLE COPY_EMP
as
SELECT *
FROM EMP
WHERE 1 =2 ;
This creates the table, but the constraints are not copied over.
I was reading about DBMS_REDEFINITION - can that be used for this scenario ?
Thanks!
Anand

>
I tried that, but the constraint names are posing a problem. And unfortunately our constraints are not named in a standard, so am finding it difficult to replace them.
Was just wondering if there were any simpler approach to this.
>
No - there isn't.
You will have to use new names for the constraints. That usually means extracting the DDL and manually changing the constraint names.

Create a table from another table

I have Windows XP with 10g 10.2.0.1.0
I need to create a table from another table to re-arrange the table column order and add the following statement at the end of creation.
PCTFREE 10 PCTUSED 0 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE
INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "TAB_DATA"
Below iis my SQL statement, but it doesn't work. Please help.
create table my_table as (select t1, t5, t2, t3, t4 from orig_table
PCTFREE 10 PCTUSED 0 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE
INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "TAB_DATA"
*);*

Kee Kee wrote:
I have Windows XP with 10g 10.2.0.1.0
I need to create a table from another table to re-arrange the table column order Why? Column order has no meaning. The individual SELECT statement specifies the column order that particular statement wants, which may be different from the needs of some other SELECT statement.
and add the following statement at the end of creation.
PCTFREE 10 PCTUSED 0 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE
INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "TAB_DATA"
Below iis my SQL statement, but it doesn't work. Please help.
create table my_table as (select t1, t5, t2, t3, t4 from orig_table
PCTFREE 10 PCTUSED 0 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE
INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "TAB_DATA"

I can't create table from another table?

Hi everyone!
I have a problem that I don't known the reason why?
I'm using Oracle version 8i and I want to create a table from another table, such as:
     CREATE TABLE a_backup as SELECT * FROM a => It's OK, table a_backup is created.
But there is only a table that I can't created like that, such as:
     CREATE TABLE b_backup AS SELECT * FROM b;
When I run over command, SQL Plus is not responding... and clients are can't access to DB or Executing forever
This is the first time I met this problem.
Can Anyone help me to resolved it?
Thanks in advance!

xi`tin wrote:
Hi everyone!
I have a problem that I don't known the reason why?
I'm using Oracle version 8i and I want to create a table from another table, such as:You realize, of course, that 8i is completely out of support .... Is your OS and hardware just as old as your rdbms software, or is it only the rdbms that your company refuses to upgrade?
     CREATE TABLE a_backup as SELECT * FROM a => It's OK, table a_backup is created.
But there is only a table that I can't created like that, such as:
     CREATE TABLE b_backup AS SELECT * FROM b;
When I run over command, SQL Plus is not responding... and clients are can't access to DB or Executing forever
This is the first time I met this problem.
Can Anyone help me to resolved it?
Thanks in advance!

Query for inserting data into table and incrementing the PK.. pls help

I have one table dd_prohibited_country. prohibit_country_key is the primary key column.
I have to insert data into dd_prohibited_country based on records already present.
The scenario I should follow is:
For Level_id 'EA' and prohibited_level_id 'EA' I should retreive the
max(prohibit_country_key) and starting from the maximum number again I have to insert them
into dd_prohibited_country. While inserting I have to increment the prohibit_country_key and
shall replace the values of level_id and prohibited_level_id.
(If 'EA' occurs, I have to replace with 'EUR')
For Instance,
If there are 15 records in dd_prohibited_country with Level_id 'EA' and prohibited_level_id 'EA', then
I have to insert these 15 records starting with prohibit_country_key 16 (Afetr 15 I should start inserting with number 16)
I have written the following query for this:
insert into dd_prohibited_country
select
     a.pkey,
     b.levelid,
     b.ieflag,
     b.plevelid
from
     (select
          max(prohibit_country_key) pkey
     from
          dd_prohibited_country) a,
     (select
prohibit_country_key pkey,
          replace(level_id,'EA','EUR') levelid,
          level_id_flg as ieflag,
          replace(prohibited_level_id,'EA','EUR') plevelid
     from
          dd_prohibited_country
     where
          level_id = 'EA' or prohibited_level_id = 'EA') b
My problem here is, I am always getting a.pkey as 15, because I am not incrementing it.
I tried incrementing it also, but I am unable to acheive it.
Can anyone please hepl me in writing this query.
Thanks in advance
Regards
Raghu

Because you are not incrementing your pkey. Try like this.
insert
   into dd_prohibited_country
select a.pkey+b.pkey,
     b.levelid,
     b.ieflag,
     b.plevelid
   from (select     max(prohibit_country_key) pkey
        from dd_prohibited_country) a,
     (select     row_number() over (order by prohibit_country_key) pkey,
          replace(level_id,'EA','EUR') levelid,
          level_id_flg as ieflag,
          replace(prohibited_level_id,'EA','EUR') plevelid
        from     dd_prohibited_country
       where level_id = 'EA' or prohibited_level_id = 'EA') bNote: If you are in multiple user environment you can get into trouble for incrementing your PKey like this.

Which trigger to use for insert data into db table in Forms

Hi,
My form is current having a database block with table reference. When enter data into form field and click on save button. Automatically the record is inserted into database table.
I want to make this as manual insert. I changed the data block to a non-database. Where should i write the insert statement in order to insert data into table.
Is it Key-commit trigger at form level?
Please advise.
Thanks,
Yuvaraaj.

Hi Yuvaraaj.
Insert should happen when we click on the save which is inbuilt in the form. In this case where should i write the insert statement.Forms in built save commit's the form data where block is based on database not non database.
@2nd reply
Ypu are right. The reason i chnaged the database block to non-database is Currently i have a database block with form field canvas which insert only 1 record in to >table when we click on standard save button. The requirement was to add a field called CHANNEL which should have multiple values displayed. (i created this channel >field in a seperate datablock (non database) and used the same canvas.) When we insert data in all fields (single record) and channel we should be able to selected >multiple channel (say A,B and C) when we click on save then 3 records should be inserted in to the table which looping values for each channel. This was the actual >requirement and this is the reason why iam changing the block to non-database block.You are talking about two blocks.. 1. Master block and 2. Details block name channel
You are inserting one record in master block then insert 3 record name A,B,C for that master record.
Now you want master record should insert to each A,B,C record. Means
'how are you' --master record
and you want
'A'- 'how are you'
'B'- 'how are you'
'C'- 'how are you'OR
?Ok. If you want master record save in database and then want to save non-database(channel) data into database USE Post-Insert trigger at block level and do the rest.
Hope this helps...
Hamid
Mark correct/helpful to help others to get right answer(s).*
Edited by: HamidHelal on Jan 26, 2013 1:20 AM

How can I insert data into the standard CRM tables ?

Hi Experts,
Scenario----
I need to download few attributes (fields) from SAP MDM to SAP CRM via SAP XI. I'm using the 'COMT_PRODUCT_MAINTAIN_API' API for it.
The attributes(fields) that are present in the strucutres of API are downloaded into CRM system (by executing the Inbound proxy that is created based on the Message Interface created on XI) by calling the functions present in the API.
And for those fields that are not present in CRM, but need to be downloaded into CRM, I'm creating the Set Type attributes in CRM, which get appended to the API.
My query is:
There are fields in CRM into which I need to insert the values. But they are not listed in the API. So, how can I insert(/download) the values into these standard fields?
Regret the long description. Intended to be clear.
TIA. Points will be awarded.
Regards,
Kris
Edited by: Kris on Jul 21, 2008 8:00 AM

he INSERT program throws exception???
can any one help me how to insert data into tabel.I have never used the jdbc driver to access, but what do you think that the flag READONLY=true means? An insert is not a read.
Kaj

How can i insert data into DB from my page programatically in Oracle ADF..?

Hai, this is praveen.
I have created an EO and VO, when i have inserted data by dragging and dropping from DataControl -->Operations-->Create. I have successfully inserting data. But how can i do it programatically. What are the pre-defined steps that i can use over there to insert data into table programatically. Could u plz help me?

Hi,
You have to create an action Listener in the bean for any button.
Then call an AM method.
In that you have to do the following
ViewObject yourVO = getYourVO();
Row r = yourVo.createRow();
r.setAttribute("Column1", value1); //the name of column should be as it is in your vo attribute.
yourVO.insertRow(r);
this.getDbTransaction().commit();
Thanks

Calling webservice in udf for inserting data into webservice

Dear Experts,
      Please give me the drawbacks of using lookup function for inserting data. we are calling a webservice from the udf for inserting the data using a webservice.
It is a file to jdbc usnig a soap lookup . we use this approach because we need to pass the response from webservice along with the error data to the jdbc.   is there any other way to do it without using bpm ?
    In the udf we are creating the xml structure for webservice and passing the parameters through arguments.
is there a better approach for this ?
Thanks,
Aju

Hi Aju,
You can do it without BPM.
Write UDF for Soap Lookup. Parse the response message from Webservice. and map the required values to respective fields.
See the weblog
Webservice Calls From a User Defined Function.
Negative point of this solution is that it will take some time to call Webservice and get response back from it.
Kulwinder

How can I Insert data into my msaccess Database table

Hello all,
I am new to Java programming and I have problem that how can i insert name into my database table.
The code which i have written is following:
String filename = "d:/test.mdb";
String database = "jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=";
database+= filename.trim() + ";DriverID=22;READONLY=true}";
Connection con = DriverManager.getConnection(database,"","");
String s = String.valueOf(text.getText());
int k =10;
Statement st = con.createStatement();
st.execute("create table Test123(name text)");
st.execute("INSERT INTO Test123 values" +s);
on the INSERT program throws exception???
can any one help me how to insert data into tabel.
Thanks

he INSERT program throws exception???
can any one help me how to insert data into tabel.I have never used the jdbc driver to access, but what do you think that the flag READONLY=true means? An insert is not a read.
Kaj

INSERTING INTO A TABLE FROM ANOTHER TABLE

Hi,
I am having a table called emp in which 5 columns are there, I want to insert some rows from another table called employees, only into three columns of emp table through a sub query.
Is this scenario is possible, I tried so many queries but it is not working out.
Can any body help me out.
The columns in emp table is
empno, ename, doj, designation, salary, deptno, mgrid
The columns in employees table is
empno, name, hiredate, post, salary, commission, deptno, mgr
I want to insert into empno, ename, doj, designation columns of emp table from the employees table empno, name, hiredate, post columns.
Ramesh.

It looks like your EMP table has 7 columns, not 5, and you want to insert into 4 columns, not 3.
insert into emp
(empno, ename, doj, designation)
select empno, name, hiredate, post
from employees;

Question on Creating table from another table and copying the partition str

Dear All,
I want to know whether is there any way where we can create a table using another table and have the partitions of the new table to be exactly like the used table.
Like
CREATE TABLE TEST AS SELECT * FROM TEMP;
The table TEMP is having range and hash partitions.
Is there any way when we use the above command, we get the table partitions of TEMP to be copied to the new table TEST.
Appreciate your suggestions on this one.
Thanks,
Madhu K.

may this answer your question...
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:595568200346856483
Ravi Kumar

How to post a data into table from another table

oracle forms6i
Hai All
I have created an form for the purpose of attendance generating. I had a problem that i can post only two data
I have two tables One table was created dynamically the data in the tables are fetched from text file and they are divided and stored the fields are
Barcode Bartime Bardate
000011 0815 08-01-2010-- he come in
000012 0816 08-01-2010
000013 0815 08-01-2010
000011 1130 08-01-2010--- he goes for a break
000011 1145 08-01-2010--- he again comes in
000011 1650 08-01-2010
000012 1655 08-01-2010
000013 1645 08-01-2010-- he goes home
From this i need to move these data to the database table the table name is dail_att and the fields are
barcode, timein,timeout,breakin,breakout,date Like i need like this
Barcode Timein Breakin Breakout Timeout Attend_date
000011 0815 1130 1145 1650 08-01-2010
I have tried using some count function and row count but it is not working Pls let give some good solutions
The coding is
declare
     cnt number;
bar_code varchar2(25);
bar_date date;
in_time varchar2(25);
out_time varchar2(25);
intr_intime varchar2(25);
intr_outtime varchar2(25);
Cursor c1 is
select count(*),barcode,bardate,bartime
--row_number() over ( order by bartime ) RN
from temp_attendance
group by barcode,bardate,bartime
order by bardate;
begin
For r1 in c1 loop
--select barcode,bardate,bartime
--row_number() over partition by barcodeorder by bartime as rn
-- from temp_attendance
--group by barcode,bardate,bartime
-- order by bardate;
     if (cnt <= 1 ) then
select barcode,intime,intrtimein,introuttime,outtime,attend_date into bar_code,in_time,intr_intime,intr_outtime,out_time,bar_date from dail_att where attend_date = r1.bardate-1;
               update dail_att set outtime= r1.bartime where attend_date=r1.bardate and barcode=r1.barcode;
          elsif(cnt <= 2 ) then
          insert into dail_att(barcode,attend_date,intime,outtime)
values(r1.barcode,r1.bardate,min(r1.bartime),max(r1.bartime));
     --     else
          --     update dail_att set outtime= r1.bartime where attend_date=r1.bardate and barcode=r1.barcode;
          end if;
     End loop;
forms_ddl('commit');
exception
when others then
forms_ddl('rollback');
message(sqlerrm||dbms_error_Text);
message(sqlerrm||dbms_error_Text);
End;
Thanks & Regards
Srikkanth.M

Hai Sir
Once again thanks for Your Response,
Sir here i dont want to hard code timing because if there is any change in shifts then we need to change those thing
So i have tried some thing like this
declare
Cursor c1 is
Select BARCODE,BARDATE,BARTIME
From temp_attendance
ORDER BY BARCODE,BARTIME ;
begin
For r1 in c1 loop
if c1% rowcount=0 then
if sql%notfound then
insert into dail_att(barcode,attend_date,intime)
values(r1.barcode,r1.bardate,r1.bartime);
else
update dail_att set outtime= r1.bartime where barcode= r1.barcode
and intime is not null and attend_date=r1.bardate;
end if;
else
if sql%found then
update dail_att set intrintime= r1.bartime where barcode= r1.barcode
and intime is not null and attend_date=r1.bardate;
else
update dail_att set introuttime= r1.bartime where barcode= r1.barcode
and intime is not null and attend_date=r1.bardate;
end if;
End loop;
End;
if it correct pls tell ur comments on this and further changes
Thanks & Regards
Srikkanth.M

How to insert Date into Database from workbench.

Hi
I have requirement where I need to insert the currentDate and Time to the database.   Here I am using as
At SQL Statement Info Editor ,have like these :
Type     value
Date     parse-dateTime(current-dateTime())
At DB I have Datatype as DateTime( Using MySQL). Here i am getting error like :
Caused by: com.adobe.idp.dsc.jdbc.exception.JDBCIllegalParameterException: Type mismatch is found when preparing SQL statement. Expecting type 'date', but got type 'String'.
Could any one tell me where I can find detailed log say hibernate type... where exatly we are getting error.(Expect jboss's server log).
Please tell how to insert the date into the DB ASAP.
Thanks
Praveen

Thanks for   all replies.
Eventually I got the solution the post
From the Form (Using DatePicker) , we will get the DateTime datatype to the Workbench. All we need to do is assign the same to DateTime variable in the workbench and inserting the data to the DB.
It works.
Thanks
Praveen.

Need Logic for Inserting data into table from another table

Similar Messages

Maybe you are looking for