Need logic for invoice due date and discount due date uncear
Hi Experts.. am new to ABAP
i had an issue please need some logics for these..
Formatting of the Invoice due dates and Discount due date is unclear e.g 20101109,
Invoice due date and Discount due dates are in correct on 10 and 20 days reminders on missing credit notes for blocked invoices.
<removed by moderator>
Thanks & Regards
Edited by: Thomas Zloch on May 18, 2011 1:55 PM
Can you provide more info?
are you talking about BSID open accounts?
if yes, use function module DETERMINE_DUE_DATE.
<removed by moderator>
Edited by: Thomas Zloch on May 18, 2011 2:10 PM - please do not ask for "award"
Similar Messages
-
What is 'net due date'and 'discount due date'
Hi
Can any one expalin me What is 'net due date'and 'discount due date'
Thanks in advance
DeviNet Due date is the date on which the actual payment is due. it is picked up from payment terms.
Discount due date is the date from which discount is calculated.
Usually we allow discount if payment is before a stipulated period.
Regards,
Harmees -
I've recently lost lots of data and purchases due to Iphone 4 crashing... Surely there is a way to recover "lost" music, apps, and audiobooks which I PURCHASED from ITunes in the last 1.5 months...? Greatly appreciate any suggestions or direction in this matter!
Note: Previously purchased music is only available through iTunes in the Cloud in Australia, Canada, Cypress, France, Ireland, Luxembourg, Malta, Mexico, New Zealand, Spain, the United Kingdom, and the United States."
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
The invoice date and the paymant date showing the same
hi sap techies
i am facing a typical problem the invoice date and the payment date is showing the same in fbl5n.the payment terms are set for 30 days that means that the payment date should be 30 days from the invoice date but in fb03 the system shows invoice date and the payment due date to be the same.
please help
kind regardsHi,
Payment terms are calculacted either on
- Document Date
- Posting Date or
- Entry Date
You must have chosen document date in the parameters for payment term and now you must be comparing on posting date.
Check what is the parameter in payment terms.
Also check the payment terms in the document.
Good Luck!
SAP Solutioning -
What is procedure for creating new vendor and material master data in ABAP
What is procedure for creating new vendor and material master data in ABAP .
see below code which is used for creation of vendor master as well as extension...
*& Report ZFC_VENDOR_CREATE *
REPORT ZFC_VENDOR_CREATE LINE-SIZE 100
NO STANDARD PAGE HEADING
MESSAGE-ID ZZ.
TABLES
TABLES : SSCRFIELDS. " Fields on selection screens
CONSTANTS
DATA : C_SPLIT TYPE C VALUE '#'. " Used for Has Separator in GUI_UPLAOD
TYPES
Int'table to hold Vendor Master Data
TYPES : BEGIN OF TY_VENDOR_MASTER,
FLAG TYPE C, " Update Flag
LIFNR TYPE LIFNR, " Vendor Number
BUKRS TYPE BUKRS, " Company Code
KTOKK TYPE KTOKK, " Account Group
ANRED TYPE ANRED, " Title
NAME1 TYPE NAME1_GP, " Name1
NAME2 TYPE NAME2_GP, " Name2
SORTL TYPE SORTL, " Search Term 1
SORT2 TYPE AD_SORT2UL, " Search Term 2
STRAS TYPE STRAS_GP, " Street
PSTLZ TYPE PSTLZ, " Postal Code
ORT01 TYPE ORT01_GP, " City
REGIO TYPE REGIO, " Region
LAND1 TYPE LAND1_GP, " Country
SPRAS TYPE SPRAS, " Language
VBUND TYPE RASSC, " Trading Partner
BANKS TYPE BANKS, " Country
BANKL TYPE BANKK, " Bank Key
BANKN TYPE BANKN, " Bank Account
BKONT TYPE BKONT, " Bank Control Key
BANKA TYPE BANKA, " Name of Bank
AKONT TYPE AKONT, " Reconciliation Account
FDGRV TYPE FDGRV, " Cash Management Group
ZTERM TYPE DZTERM, " Payment Terms
REPRF TYPE REPRF, " Check Double Invoice
ZWELS TYPE DZWELS, " Payment Methods
XPORE TYPE XPORE, " Pay all items separately
END OF TY_VENDOR_MASTER,
Int'table to hold Vendor Extend Data
BEGIN OF TY_VENDOR_EXTEND,
FLAG TYPE C, " Update Flag
LIFNR TYPE LIFNR, " Vendor Number
BUKRS TYPE BUKRS, " Company Code
KTOKK TYPE KTOKK, " Account Group
REF_LIFNR TYPE LIFNR, " Reference Vendor Number
REF_BUKRS TYPE BUKRS, " Reference Company Code
AKONT TYPE AKONT, " Reconciliation Account
FDGRV TYPE FDGRV, " Cash Management Group
ZTERM TYPE DZTERM, " Payment Terms
REPRF TYPE REPRF, " Check Double Invoice
ZWELS TYPE DZWELS, " Payment Methods
XPORE TYPE XPORE, " Pay all items separately
END OF TY_VENDOR_EXTEND,
Int'table to hold Error Records Data
BEGIN OF TY_ERROR,
MSG(200) TYPE C, " To hold Message
LIFNR TYPE LIFNR, " Vendor Number
BUKRS TYPE BUKRS, " Company Code
END OF TY_ERROR.
DATA (Simple Fields)
DATA : W_COUNT TYPE I, " Variable to hold count of Records
W_SUCC_REC TYPE I, " No. of Success Records
W_SUCC_REC1 TYPE I, " No. of Updated Records
W_ERR_REC TYPE I, " No. of Error Records
w_noupdate_rec type i. " No. of Records not Changed
INTERNAL TABLES
Int'table to hold uploaded data from File
DATA : IT_VENDOR_MASTER TYPE STANDARD TABLE OF TY_VENDOR_MASTER,
WA_IT_VENDOR_MASTER TYPE TY_VENDOR_MASTER,
IT_VENDOR_EXTEND TYPE STANDARD TABLE OF TY_VENDOR_EXTEND,
WA_IT_VENDOR_EXTEND TYPE TY_VENDOR_EXTEND,
WA_IT_BDCDATA TYPE BDCDATA,
IT_BDCDATA TYPE STANDARD TABLE OF BDCDATA,
WA_IT_MESSTAB TYPE BDCMSGCOLL,
IT_MESSTAB TYPE STANDARD TABLE OF BDCMSGCOLL,
IT_ERROR TYPE STANDARD TABLE OF TY_ERROR,
WA_IT_ERROR TYPE TY_ERROR,
it_error_fk01 type standard table of ty_error,
wa_it_error_fk01 type ty_error,
it_error_fk02 type standard table of ty_error,
wa_it_error_fk02 type ty_error,
it_succ_rec1 type standard table of ty_error,
wa_it_succ_rec1 type ty_error,
it_noupdate type standard table of ty_error,
wa_it_noupdate type ty_error.
FLAGS
DATA : FL_FLAG1 TYPE C, " Flag to check error upload file
FL_FLAG2 TYPE C, " Flag to hold value
FL_FLAG3 TYPE C, " Flag to hold value
FL_FLAG4 TYPE C. " Flag to hold value
SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-001,
POSITION POS_LOW.
PARAMETERS : P_FILE(128) DEFAULT 'C:\UPLOAD.TXT' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-002,
POSITION POS_LOW.
PARAMETERS : P_VENMAS RADIOBUTTON GROUP R1 DEFAULT 'X'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-003,
POSITION POS_LOW.
PARAMETERS : P_VENEXT RADIOBUTTON GROUP R1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-004,
POSITION POS_LOW.
PARAMETERS : P_MODE(1) DEFAULT 'N'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-005,
POSITION POS_LOW.
PARAMETERS : P_GROUP(12) DEFAULT 'ZFC_VENDOR_C' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-016,
POSITION POS_LOW.
PARAMETERS : P_GROUP1(12) DEFAULT 'ZFC_VENDOR_U' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
Form to get file path for upload of data
PERFORM GET_FILE_PATH.
AT SELECTION-SCREEN ON BLOCK B1.
Form to Validate data specified on Selection Screen
CHECK SSCRFIELDS-UCOMM EQ 'ONLI'.
PERFORM VALIDATE_DATA.
START - OF - SELECTION
START-OF-SELECTION.
IF P_VENMAS = 'X'.
Form to upload data from Presentation Server for Vendor Master
PERFORM UPLOAD_DATA TABLES IT_VENDOR_MASTER.
IF FL_FLAG1 NE 'X'.
SORT IT_VENDOR_MASTER BY LIFNR BUKRS KTOKK.
DELETE IT_VENDOR_MASTER WHERE LIFNR = ' '
AND BUKRS = ' '
AND KTOKK = ' '.
Form to process data for Vendor Master
PERFORM INSERT_VENDOR_MASTER_DATA.
ENDIF.
ELSEIF P_VENEXT = 'X'.
Form to upload data from Presentation Server for Vendor Extend
PERFORM UPLOAD_DATA TABLES IT_VENDOR_EXTEND.
IF FL_FLAG1 NE 'X'.
SORT IT_VENDOR_EXTEND BY LIFNR BUKRS KTOKK.
DELETE IT_VENDOR_EXTEND WHERE LIFNR = ' '
AND BUKRS = ' '
AND KTOKK = ' '.
Form to process data for Vendor Master
PERFORM CHK_AND_INS_VENDOR_EXTEND_DATA.
ENDIF.
ENDIF.
END - OF - SELECTION
END-OF-SELECTION.
IF FL_FLAG1 NE 'X'.
FORMAT COLOR 7.
WRITE:/2 TEXT-O01. " Total Number of records read :
FORMAT COLOR OFF.
WRITE:40 W_COUNT.
FORMAT COLOR 7.
WRITE:/2 TEXT-O02. " Total Number of Success records :
FORMAT COLOR OFF.
WRITE:40 W_SUCC_REC.
FORMAT COLOR 7.
WRITE:/2 TEXT-O07. " Total Number of Updated records :
FORMAT COLOR OFF.
WRITE:40 W_SUCC_REC1.
FORMAT COLOR 7.
WRITE:/2 TEXT-O08. " Total Number of Unchanged records :
FORMAT COLOR OFF.
WRITE:40 W_noupdate_REC.
FORMAT COLOR 7.
WRITE:/2 TEXT-O03. " Total Number of Error records :
FORMAT COLOR OFF.
WRITE:40 W_ERR_REC.
if not it_succ_rec1 is initial.
skip 1.
perform display_changed_report.
endif.
if not it_noupdate is initial.
skip 1.
perform display_nochange_report.
endif.
IF NOT IT_ERROR IS INITIAL.
SKIP 3.
Form to display error data
PERFORM DISPLAY_ERROR_REPORT.
ENDIF.
IF FL_FLAG2 = 'X'.
SKIP 2.
FORMAT COLOR 4.
WRITE:/2 TEXT-O04. " BDC Session Name for Creation (FK01) :
FORMAT COLOR OFF.
WRITE:40 P_GROUP.
perform display_error_report_fk01.
ENDIF.
IF FL_FLAG3 = 'X'.
SKIP 2.
FORMAT COLOR 4.
WRITE:/2 TEXT-O09. " BDC Session Name for Updation (FK02) :
FORMAT COLOR OFF.
WRITE:40 P_GROUP1.
perform display_error_report_fk02.
ENDIF.
ENDIF.
*& Form GET_FILE_PATH
This form is used to get the specified path for uploading of data from
flat file with the help of F4 function key
FORM GET_FILE_PATH .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = P_FILE.
ENDFORM. " GET_FILE_PATH
*& Form VALIDATE_DATA
This form is used to validate the data given by user on the Selection
Screen and the appropriate message is been displayed when an wrong
entry is inputted
FORM VALIDATE_DATA .
IF SY-BATCH EQ 'X'.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E001(ZZ) WITH TEXT-011.
" Excel file not to be used in Batch Mode
ENDIF.
IF P_MODE NE 'A' AND P_MODE NE 'N' AND P_MODE NE 'E'.
MESSAGE E001(ZZ) WITH TEXT-012.
" Session Mode should be either A or N or E
ENDIF.
ENDFORM. " VALIDATE_DATA
*& Form UPLOAD_DATA
This form is used to upload data from Presentation Server for either
Vendor Master or Vendor Extend
FORM UPLOAD_DATA TABLES P_IT_VENDOR.
DATA : L_FILENAME TYPE STRING,
L_FILETYPE TYPE CHAR10 VALUE 'ASC',
L_HEADER_LENGTH TYPE I VALUE 0,
L_READ_BY_LINE TYPE CHAR01 VALUE 'X'.
MOVE P_FILE TO L_FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = L_FILENAME
FILETYPE = L_FILETYPE
HEADER_LENGTH = L_HEADER_LENGTH
READ_BY_LINE = L_READ_BY_LINE
HAS_FIELD_SEPARATOR = C_SPLIT
TABLES
DATA_TAB = P_IT_VENDOR
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF SY-SUBRC <> 0.
MESSAGE I001(ZZ) WITH TEXT-006 L_FILENAME.
MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
FL_FLAG1 = 'X'.
ELSEIF P_IT_VENDOR[] IS INITIAL.
MESSAGE I001(ZZ) WITH TEXT-014. " Uploaded File contains no data
FL_FLAG1 = 'X'.
ENDIF.
ENDFORM. " UPLOAD_DATA
*& Form INSERT_VENDOR_MASTER_DATA
This form is used to process BDC data for Vendor Master
FORM INSERT_VENDOR_MASTER_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR.
sort it_vendor_master by flag.
LOOP AT IT_VENDOR_MASTER INTO WA_IT_VENDOR_MASTER.
W_COUNT = W_COUNT + 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_MASTER-LIFNR
IMPORTING
OUTPUT = WA_IT_VENDOR_MASTER-LIFNR.
if wa_it_vendor_master-flag = 'A'.
SELECT SINGLE LIFNR
FROM LFB1
INTO L_LIFNR
WHERE LIFNR = WA_IT_VENDOR_MASTER-LIFNR
AND BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
IF SY-SUBRC EQ 0.
WA_IT_ERROR-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_ERROR-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
WA_IT_ERROR-MSG = TEXT-015.
APPEND WA_IT_ERROR TO IT_ERROR.
W_ERR_REC = W_ERR_REC + 1.
CLEAR : WA_IT_ERROR, L_LIFNR.
ELSE.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_MASTER.
PERFORM CALL_TRANSACTION.
ENDIF.
CLEAR : WA_IT_VENDOR_MASTER.
elseif wa_it_vendor_master-flag = 'C'.
IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
PERFORM CLOSE_BDC_SESSION.
fl_flag4 = 'X'.
ENDIF.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_MASTER.
PERFORM CALL_TRANSACTION_FK02.
CLEAR : WA_IT_VENDOR_MASTER.
elseif wa_it_vendor_master-flag = 'N'.
WA_IT_noupdate-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_noupdate-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
WA_IT_noupdate-MSG = TEXT-018.
APPEND WA_IT_noupdate TO IT_noupdate.
W_noupdate_REC = W_noupdate_REC + 1.
CLEAR : WA_IT_noupdate, WA_IT_VENDOR_MASTER.
endif.
ENDLOOP.
IF FL_FLAG3 = 'X'.
PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM. " INSERT_VENDOR_MASTER_DATA
*& Form POPULATE_BDC_DATA_VEN_MASTER
This form is used to populate BDC data of Vendor Master
FORM POPULATE_BDC_DATA_VEN_MASTER .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_MASTER-ZTERM
IMPORTING
OUTPUT = WA_IT_VENDOR_MASTER-ZTERM.
IF WA_IT_VENDOR_MASTER-REPRF = 'Y'.
WA_IT_VENDOR_MASTER-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_MASTER-XPORE = 'Y'.
WA_IT_VENDOR_MASTER-XPORE = 'X'.
ENDIF.
if wa_it_vendor_master-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_MASTER-KTOKK,
BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_master-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
BDC_FIELD USING 'BDC_OKCODE' '=MALL',
BDC_DYNPRO USING 'SAPMF02K' '0106',
BDC_FIELD USING 'RF02K-D0110' 'X',
BDC_FIELD USING 'RF02K-D0120' 'X',
BDC_FIELD USING 'RF02K-D0130' 'X',
BDC_FIELD USING 'RF02K-D0210' 'X',
BDC_FIELD USING 'RF02K-D0215' 'X',
BDC_FIELD USING 'RF02K-D0220' 'X',
BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0110',
BDC_FIELD USING 'LFA1-ANRED' WA_IT_VENDOR_MASTER-ANRED,
BDC_FIELD USING 'LFA1-NAME1' WA_IT_VENDOR_MASTER-NAME1,
BDC_FIELD USING 'LFA1-NAME2' WA_IT_VENDOR_MASTER-NAME2,
BDC_FIELD USING 'LFA1-SORTL' WA_IT_VENDOR_MASTER-SORTL,
BDC_FIELD USING 'LFA1-STRAS' WA_IT_VENDOR_MASTER-STRAS,
BDC_FIELD USING 'LFA1-ORT01' WA_IT_VENDOR_MASTER-ORT01,
BDC_FIELD USING 'LFA1-PSTLZ' WA_IT_VENDOR_MASTER-PSTLZ,
BDC_FIELD USING 'LFA1-LAND1' WA_IT_VENDOR_MASTER-LAND1,
BDC_FIELD USING 'LFA1-REGIO' WA_IT_VENDOR_MASTER-REGIO,
BDC_FIELD USING 'LFA1-SPRAS' WA_IT_VENDOR_MASTER-SPRAS,
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_DYNPRO USING 'SAPMF02K' '0120',
BDC_FIELD USING 'LFA1-VBUND' WA_IT_VENDOR_MASTER-VBUND,
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_DYNPRO USING 'SAPMF02K' '0130',
BDC_FIELD USING 'LFBK-BANKS(01)' WA_IT_VENDOR_MASTER-BANKS,
BDC_FIELD USING 'LFBK-BANKL(01)' WA_IT_VENDOR_MASTER-BANKL,
BDC_FIELD USING 'LFBK-BANKN(01)' WA_IT_VENDOR_MASTER-BANKN,
BDC_FIELD USING 'BDC_OKCODE' '=BANK',
BDC_DYNPRO USING 'SAPLBANK' '0100',
BDC_FIELD USING 'BNKA-BANKA' WA_IT_VENDOR_MASTER-BANKA,
BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
BDC_DYNPRO USING 'SAPMF02K' '0130',
BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
BDC_DYNPRO USING 'SAPMF02K' '0210',
BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_MASTER-AKONT,
BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_MASTER-FDGRV,
BDC_FIELD USING 'BDC_OKCODE' '=/00',
BDC_DYNPRO USING 'SAPMF02K' '0215',
BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_MASTER-ZTERM,
BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_MASTER-REPRF,
BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_MASTER-ZWELS,
BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_MASTER-XPORE,
BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM. " POPULATE_BDC_DATA_VEN_MASTER
*& Form BDC_DYNPRO
This form is used to move data to BDCDATA int'table
FORM BDC_DYNPRO USING PROGRAM TYPE BDC_PROG
DYNPRO TYPE BDC_DYNR.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-PROGRAM = PROGRAM.
WA_IT_BDCDATA-DYNPRO = DYNPRO.
WA_IT_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM. " BDC_DYNPRO
*& Form BDC_FIELD
This form is used to move data to BDCDATA int'table
FORM BDC_FIELD USING FNAM TYPE ANY
FVAL TYPE ANY.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-FNAM = FNAM.
WA_IT_BDCDATA-FVAL = FVAL.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM. " BDC_FIELD
*& Form CALL_TRANSACTION
This form is used to Call FK01 for processing of data either for
Vendor Master or Vendor Extend. The error records are inserted to
Session which can be processed using SM35
FORM CALL_TRANSACTION .
DATA : L_OPTION TYPE CTU_PARAMS,
L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK01'
USING IT_BDCDATA
MESSAGES INTO IT_MESSTAB
OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
W_SUCC_REC = W_SUCC_REC + 1.
ELSE.
IF FL_FLAG2 NE 'X'.
PERFORM OPEN_BDC_SESSION.
FL_FLAG2 = 'X'.
ENDIF.
PERFORM BDC_INSERT.
W_ERR_REC = W_ERR_REC + 1.
PERFORM ERROR_RECORD_DATA.
ENDIF.
ENDFORM. " CALL_TRANSACTION
*& Form OPEN_BDC_SESSION
Form used to open session for Error out Records
FORM OPEN_BDC_SESSION .
DATA : L_USERID TYPE APQ_MAPN, " Variable to hold user-id
L_GROUP TYPE APQ_GRPN. " Variable to hold value
MOVE P_GROUP TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = L_GROUP
KEEP = SPACE
USER = L_USERID
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-008. " Unable to open BDC Session
ENDIF.
ENDFORM. " OPEN_BDC_SESSION
*& Form BDC_INSERT
This form is used to insert error records to a Session method
FORM BDC_INSERT .
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FK01'
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-009. " Unable to Insert Data to BDC Session
ENDIF.
ENDFORM. " BDC_INSERT
*& Form ERROR_RECORD_DATA
This form is used to process the messages for the error records which
will be displayed on the output report
FORM ERROR_RECORD_DATA .
DATA : L_LINES TYPE I,
L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
CLEAR L_MSG.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = WA_IT_MESSTAB-MSGID
LANG = SY-LANGU
NO = WA_IT_MESSTAB-MSGNR
V1 = WA_IT_MESSTAB-MSGV1
V2 = WA_IT_MESSTAB-MSGV2
V3 = WA_IT_MESSTAB-MSGV3
V4 = WA_IT_MESSTAB-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WA_IT_ERROR_fk01-MSG = L_MSG.
ENDIF.
IF P_VENMAS = 'X'.
WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
ELSEIF P_VENEXT = 'X'.
WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
ENDIF.
APPEND WA_IT_ERROR_fk01 TO IT_ERROR_fk01.
CLEAR WA_IT_ERROR_fk01.
ENDIF.
ENDFORM. " ERROR_RECORD_DATA
*& Form CLOSE_BDC_SESSION
Form used to close session of the Error Records
FORM CLOSE_BDC_SESSION .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-010. " Unable to Close BDC Session
ENDIF.
ENDFORM. " CLOSE_BDC_SESSION
*& Form CHK_AND_INS_VENDOR_EXTEND_DATA
This form is used to process BDC data for Vendor Extend
FORM CHK_AND_INS_VENDOR_EXTEND_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR, fl_flag4.
sort it_vendor_extend by flag.
LOOP AT IT_VENDOR_EXTEND INTO WA_IT_VENDOR_EXTEND.
W_COUNT = W_COUNT + 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR
IMPORTING
OUTPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR.
if wa_it_vendor_extend-flag = 'A'.
SELECT SINGLE LIFNR
FROM LFB1
INTO L_LIFNR
WHERE LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR
AND BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
IF SY-SUBRC NE 0.
WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR.
WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
WA_IT_ERROR-MSG = TEXT-007.
APPEND WA_IT_ERROR TO IT_ERROR.
W_ERR_REC = W_ERR_REC + 1.
CLEAR : WA_IT_ERROR, L_LIFNR.
ELSE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_EXTEND-LIFNR
IMPORTING
OUTPUT = WA_IT_VENDOR_EXTEND-LIFNR.
SELECT SINGLE LIFNR
FROM LFB1
INTO L_LIFNR
WHERE LIFNR = WA_IT_VENDOR_EXTEND-LIFNR
AND BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
IF SY-SUBRC EQ 0.
WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
WA_IT_ERROR-MSG = TEXT-015.
APPEND WA_IT_ERROR TO IT_ERROR.
W_ERR_REC = W_ERR_REC + 1.
CLEAR : WA_IT_ERROR, L_LIFNR.
ELSE.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_EXTEND.
PERFORM CALL_TRANSACTION.
ENDIF.
ENDIF.
CLEAR : WA_IT_VENDOR_EXTEND.
elseif wa_it_vendor_extend-flag = 'C'.
IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
PERFORM CLOSE_BDC_SESSION.
fl_flag4 = 'X'.
ENDIF.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_extend.
PERFORM CALL_TRANSACTION_FK02.
CLEAR : WA_IT_VENDOR_EXTEND.
elseif wa_it_vendor_extend-flag = 'N'.
WA_IT_noupdate-LIFNR = WA_IT_VENDOR_extend-LIFNR.
WA_IT_noupdate-BUKRS = WA_IT_VENDOR_extend-BUKRS.
WA_IT_noupdate-MSG = TEXT-019.
APPEND WA_IT_noupdate TO IT_noupdate.
W_noupdate_REC = W_noupdate_REC + 1.
CLEAR : WA_IT_noupdate, WA_IT_VENDOR_EXTEND.
endif.
ENDLOOP.
IF FL_FLAG2 = 'X'.
PERFORM CLOSE_BDC_SESSION.
ENDIF.
if fl_flag3 = 'X'.
PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM. " CHK_AND_INS_VENDOR_EXTEND_DATA
*& Form POPULATE_BDC_DATA_VEN_EXTEND
This form is used to populate BDC data of Vendor Extend
FORM POPULATE_BDC_DATA_VEN_EXTEND .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_EXTEND-ZTERM
IMPORTING
OUTPUT = WA_IT_VENDOR_EXTEND-ZTERM.
IF WA_IT_VENDOR_EXTEND-REPRF = 'Y'.
WA_IT_VENDOR_EXTEND-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_extend-XPORE = 'Y'.
WA_IT_VENDOR_extend-XPORE = 'X'.
ENDIF.
if wa_it_vendor_extend-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_EXTEND-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_EXTEND-BUKRS,
BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_EXTEND-KTOKK,
BDC_FIELD USING 'RF02K-REF_LIFNR'
WA_IT_VENDOR_EXTEND-REF_LIFNR,
BDC_FIELD USING 'RF02K-REF_BUKRS'
WA_IT_VENDOR_EXTEND-REF_BUKRS,
BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_extend-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_extend-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_extend-BUKRS,
BDC_FIELD USING 'RF02K-D0210' 'X',
BDC_FIELD USING 'RF02K-D0215' 'X',
BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0210',
BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_EXTEND-AKONT,
BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_EXTEND-FDGRV,
BDC_FIELD USING 'BDC_OKCODE' '=/00',
BDC_DYNPRO USING 'SAPMF02K' '0215',
BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_EXTEND-ZTERM,
BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_EXTEND-REPRF,
BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_EXTEND-ZWELS,
BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_extend-XPORE,
BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM. " POPULATE_BDC_DATA_VEN_EXTEND
*& Form DISPLAY_ERROR_REPORT
This form is used to display the error records on the output screen
FORM DISPLAY_ERROR_REPORT .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O05. " Error List for Vendor Master
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O06. " Error List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H03, " Error Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR INTO WA_IT_ERROR.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_ERROR-LIFNR,
17 SY-VLINE,
18 WA_IT_ERROR-BUKRS,
31 SY-VLINE,
32 WA_IT_ERROR-MSG,
100 SY-VLINE.
CLEAR : WA_IT_ERROR.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
ENDFORM. " DISPLAY_ERROR_REPORT
*& Form CALL_TRANSACTION_FK02
Form used to Call Transaction FK02
form CALL_TRANSACTION_FK02 .
DATA : L_OPTION TYPE CTU_PARAMS,
L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK02'
USING IT_BDCDATA
MESSAGES INTO IT_MESSTAB
OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
W_SUCC_REC1 = W_SUCC_REC1 + 1.
WA_IT_succ_rec1-MSG = Text-017.
IF P_VENMAS = 'X'.
WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
ELSEIF P_VENEXT = 'X'.
WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
ENDIF.
APPEND WA_IT_succ_rec1 TO IT_succ_rec1.
ELSE.
IF FL_FLAG3 NE 'X'.
PERFORM OPEN_BDC_SESSION_fk02.
FL_FLAG3 = 'X'.
ENDIF.
PERFORM BDC_INSERT_fk02.
W_ERR_REC = W_ERR_REC + 1.
PERFORM ERROR_RECORD_DATA1.
ENDIF.
endform. " CALL_TRANSACTION_FK02
*& Form OPEN_BDC_SESSION_fk02
Form used to Open session for FK02
form OPEN_BDC_SESSION_fk02 .
DATA : L_USERID TYPE APQ_MAPN, " Variable to hold user-id
L_GROUP TYPE APQ_GRPN. " Variable to hold value
MOVE P_GROUP1 TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = L_GROUP
KEEP = SPACE
USER = L_USERID
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-008. " Unable to open BDC Session
ENDIF.
endform. " OPEN_BDC_SESSION_fk02
*& Form BDC_INSERT_fk02
Form used to insert data into BDC session using FK02
form BDC_INSERT_fk02 .
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FK02'
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-009. " Unable to Insert Data to BDC Session
ENDIF.
endform. " BDC_INSERT_fk02
*& Form display_changed_report
Form to display Updated Vendor data
form display_changed_report .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O10. " Updated List for Vendor Master
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O11. " Updated List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H04, " Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_succ_rec1 INTO WA_IT_succ_rec1.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_succ_rec1-LIFNR,
17 SY-VLINE,
18 WA_IT_succ_rec1-BUKRS,
31 SY-VLINE,
32 WA_IT_succ_rec1-MSG,
100 SY-VLINE.
CLEAR : WA_IT_succ_rec1.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform. " display_changed_report
*& Form display_nochange_report
Form to display No Changed data for Vendors
form display_nochange_report .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O12. " No Changes List for Vendor Master
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O13. " No Changes List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H04, " Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_noupdate INTO WA_IT_noupdate.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_noupdate-LIFNR,
17 SY-VLINE,
18 WA_IT_noupdate-BUKRS,
31 SY-VLINE,
32 WA_IT_noupdate-MSG,
100 SY-VLINE.
CLEAR : WA_IT_noupdate.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform. " display_nochange_report
*& Form ERROR_RECORD_DATA1
Form to get Error Message for Changed Vendors
form ERROR_RECORD_DATA1 .
DATA : L_LINES TYPE I,
L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
CLEAR L_MSG.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = WA_IT_MESSTAB-MSGID
LANG = SY-LANGU
NO = WA_IT_MESSTAB-MSGNR
V1 = WA_IT_MESSTAB-MSGV1
V2 = WA_IT_MESSTAB-MSGV2
V3 = WA_IT_MESSTAB-MSGV3
V4 = WA_IT_MESSTAB-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WA_IT_ERROR_fk02-MSG = L_MSG.
ENDIF.
IF P_VENMAS = 'X'.
WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
ELSEIF P_VENEXT = 'X'.
WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
ENDIF.
APPEND WA_IT_ERROR_fk02 TO IT_ERROR_fk02.
CLEAR WA_IT_ERROR_fk02.
ENDIF.
endform. " ERROR_RECORD_DATA1
*& Form display_error_report_fk01
Form to display Error Report for Master Vendors (FK01)
form display_error_report_fk01 .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O05. " Error List for Vendor Master (FK01)
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O06. " Error List for Vendor Master Extended (FK01)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H04, " Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR_fk01 INTO WA_IT_ERROR_fk01.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_ERROR_fk01-LIFNR,
17 SY-VLINE,
18 WA_IT_ERROR_fk01-BUKRS,
31 SY-VLINE,
32 WA_IT_ERROR_fk01-MSG,
100 SY-VLINE.
CLEAR : WA_IT_ERROR_fk01.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform. " display_error_report_fk01
*& Form display_error_report_fk02
Form to display Error Report for changed Vendors (FK02)
form display_error_report_fk02 .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O14. " Error List for Vendor Master (FK02)
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O15. " Error List for Vendor Master Extended (FK02)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number -
I just got a new iPhone and i set up iCloud on my girlfriend's account. To change it on settings it says delete account. Will this delete her all her data and back up data for iCloud on her iPhone and iPad? Can i change it without deleting it? Please help.
Delete the account on your phone. This will not delete any data on her phone or iPad, or data stored in iCloud.
-
Process Order Basic Finish Date and Scheduled Finish Date
Folks,
I have a requirement from the business to be able to update the Process Order Basic Finish Date and Scheduled Finish Date independently from each other.
In other words, update the Basic Finish Date and the Scheduled Finish Date cannot change or update the Scheduled Finish Date and the Basic Finish Date cannot change.
I believe the reason for this is to be able to use the Basic Date to maintain the ATP accurately and keep the Scheduled Date to mark when the order was originally due from the shop floor to be able to measure if orders are being completed on time or late.
I have worked in tnx OPUZ and had some success with other issues with these dates but I can't seem to make them work independently from each other.
Or does anyone have any ideas how to measure proces order performance to the production schedule?
Thank you for your help,
GregRajesha, thank you for your reply but it doesn't solve my problem.
Let me restate my scenario:
I start a process order and both the basic and scheduled finish dates are the same, June 1.
At some point, shop floor tells me they will be late and cannot deliver until June 15.
I need to update a date in the system so the ATP and the MRP planning runs have correct information for promising customers, I will update the Basic Finish date with June 15.
I also need to keep the original June 1 date in order to measure the shop floor performance to the production schedule to measure how early or late the order was delivered. How can I keep the original finish date or how can I measure if a process order is early or late??
Thank you for your help,
Greg -
Java.sql.Date and java.util.Date - class loaded first in the classpath
I had two jar files which has java.util.Date and java.sql.Date class file. i want to know whether which class is loaded first in the classpath...
I like to change the order of loading the class at runtime...
Is there is any way to change the order of loading of class...
I may have different version of jar files for example xerces,xercesImpl. some of the code uses xerces ,some of the code uses xercesImpl..i had common classes.
I like to load the class with the same name according to the order i need..
Can we do all these in Run time ?????I had two jar files which has java.util.Date and
java.sql.Date class file. i want to know whether
which class is loaded first in the classpath...
I like to change the order of loading the class at
runtime...
Is there is any way to change the order of loading of
class...
I may have different version of jar files for example
xerces,xercesImpl. some of the code uses xerces ,some
of the code uses xercesImpl..i had common classes.
I like to load the class with the same name according
to the order i need..
Can we do all these in Run time ?????That is meaningless.
The classes you are referring to are part of the Java API. Third party jars have no impact on that. And you can't change to the order because java.sql.Data is derived from java.util.Date. So the second must load before the first.
And if you have two jar files with those classes in them (and not classes that use them) then you either should already know how to use them or you should stop trying to do whatever you are doing because it isn't going to work. -
Java.util.Date and java.sql.Date
when i am trying to displaying date in my jsp page errors occurs saying that java.util.date and java.sql.date are matching..
i have some sql statements which i need to execute in the page.so i cant delete that import sql statement.
so what is the solution for this.
i want to display the date as 19th april 2003....in the jsp page.
thank uYou should use full names.
java.util.Date date;
java.sql.Date sdate;
..And it may be a good idea to delete one of the two "import" declaration of packages. -
Billing document date and accounting document date varying...
Hello Experts,
There is one billing document and the date of invoice is, say today, 12/01/2009. and the accounting document date is, say 15 days ahead or behind, 27/01/2009.however, the posting date is proper and according to the billing date and that is again dated today-12/01/209. Now, the user wants to know why the difference exists between the accounting document date and the billing date. any idea? there are some user exits being used but I cant make out, neither the abaper. suggestions please.
Regards,
N.Raja Sekhar.Dear Raja Sekhar
Document date is nothing but the date on which that particular transaction has taken place. But I dont know where you get the date as 27-01-2009.
It is a general practice that for exports billing document, there would be a Posting block and once the exporter receives the B/L, based on that date, the billing document would be released manually. For this, there is an user exit to input the B/L number and date and release the billing document.
So here, what the end users normally does is that the B/L Date might be on 02-01-2009 but he would not have updated on the same date. At a later date, say on 12-01-2009, he can input the B/L Date (in another words, it is Posting date) as 02-01-09 and execute the billing document.
If you see the accounting document here, the posting date would have been 02-01-2009 but the document date would be 12-01-09.
thanks
G. Lakshmipathi -
Planned Delivery Date and Actual Delivery date.
Hi,
Is there a report in SAP which shows the delivery date of a PO line item and actual GR posting date from PO history in one report?
I need to display the planned delivery date and actual delivery date in one report, preferably in columns next to each other.
Thanks in advance.Hi
To my knowledge there is no such report. You will have to develop this report through ABAP help. You need to pick the planned delivery date from the PO and GR posting date from material document. Both this fields (EEIND & BUDAT) can be viewed in the PO history.
However, challenge will be when you have multiple delivery dates and receipt posting dates are for part quantities.
Regards,
Jagadeesh -
How to display planned movement date and actual movement date together?
Hi, Professionals,
My purpose is to list delayed outbound deliveries.
Anyone could tell me how to display planned movement date and actual movement date?
Appreciate your help.Thanks Shiva.
I tried another way to do it. It works only for a short period of time.
By using VL06O, I list all outbound deliveries by limiting both planned goods movement dates and actual goods movements dates to the same week I would like to inspect. Say both from 7th/11 to 14th/11.
then I list outbound delivery list with planned goods movement date to 7th/11 but left out actual goods movements dates this time.
In excel, I compare those two lists and filter out those unique ones because those unique documents means delayed deliveries which cannot delivery according to planned date.
However, the "delayed" list generated by this method has some noises. Not all of documents are really delayed although most of them do.
I'm also looking for a way to list sales documents number of these delayed delivery documents so i can retrieve order details from it such as order value.
Help still needed. -
Fixed start date and variable end date
I'm using Project 2010 Standard. Task A has already started. It can't end until 2 weeks after the completion of task B. The only way I can make Project schedule this task is by doing so manually, allowing Project to calculate the duration. But then if the
end date of task B changes, Project reschedules the entire task based on the duration without regard for the start date. If I add a % complete to task A, then the end date doesn't change if the end date of task B does. Project seems to fix the duration
once it's calculated. I need the duration to be flexible based on the fixed start date and the end date of task B. This project file is stored in SharePoint so I can't make task A a hammock task. I get the error "You cannot create links from a project
file that exists on a Web folder to another file" even though it's the same file. Any suggestions would be greatly appreciated.WhoKnows,
I'm afraid without a hammock task the only way to do what you want is either with a manual reschedule or a macro to recalculate the duration of Task A when Task B moves.
Update: Okay, after playing around here is a little trick that might work.
1. Break Task A into two parts (e.g. -1 and -2)
2. Set the predecessor of Task A-2 to be finish-to-start with Task A-1 and finish-to-finish + 2w with Task B
Depending on the nature of Task A you may still need to do a little manual adjusting but it will effectively allow the start of Task A to be fixed and the finish to be variable depending on the status of Task B. Does that work for you?
John -
Month to Date and Year to Date Scenarios
<b>Dear SAP BI Gurus,
Can anyone please give me guidance how to create a Month to Date and Year To Date Scenarios (Variables perhaps?) for 0SRR_CF_C1? The date is in decimal and not DATE format Im assuming the reason for this is to get the Time variance . Nonetheless, Id like to create a MTD and YTD scenario for reporting.
Much Thanks
Philips Manalaysay</b>Hi,
You should take a look at the blog and doc below.
/people/vikash.agrawal/blog/2006/10/17/enable-trend-reporting-150-by-manipulating-variable-value
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Regards, -
Planned order creation with PDS valid on only order start date and not finish date
Hi All,
We have requirement to allow creation of planned order manually if production version is valid on order start date and not finish date. This is because lead time of order is longer. I refered OSS notes 385602. I could find out solution for this is implementation of OSS note 694140 to change validity mode at activity level to consider start date of first produce activity in validity interval. Problem is even If I create order in APO by implementiong this note planned order is not transfered to ECC and it gets stuck with error production version not valid.
Is there any way in ECC to control this? Any config or customization?
Regards,
SantoshNilesh,
I think there is a simple procedural skip happening in your business process. You are right when a planned order is created after MRP it would default assign it to the first available production version. 2options available for us,
1. First use transaction MF50 and do the line loading and assign the quantites to the production versions/Production lines, so that the actual capacity planning is getting completed. This way you can have planned orders with both the production versions and matching to your actual line capacity.
2. Use Quota arrangement concept, to automatically split the Planned orders during MRP for a percentage based on individual production versions.
Now when backflush is performed S225 table is updated and Planned order qty also gets reduced.
Hope this helps....
Regards,
Prasobh
Maybe you are looking for
-
How to refresh changed data in a plannable template with the Enter Key
Hi, The situation I face is as follows. Integrated Planning is being implemented as a tool for budgeting. The user changes a value in a plannable cell on the portal and wishes to see the new updated data by pressing ENTER. Currently we have provided
-
SirAdmin Deleting Mail Accounts
I am trying to get to grips with siradmin and deleting mailaccounts which have become corrupted. I have created a user called mailman in wgm who belongs to no group. I have logged on as root opened siradmin logged in as mailman. The address is the se
-
Standby Database from a RAC instance
Good Day, I have two 10gR2 Enterprise Edition RAC Instances. Is it possible to make two standby database using 10gR2 Standard Edition? Thanks in advance Alessandro
-
My i phone is locked i cannot input my code
Hello Support Community, after activating the speakcontrole. I cannot input my code anymore. You can see the numbers when you touch them nothing happens. Permanently a voice is talking to me! I already made a restart and reset. Unfortunately the SIM
-
[SOLVED] Skype 2.2.0.25 crashes almost instantly on 64 bit
Just updated to the new Skype beta (64 bit, multilib) and it crashes constantly. I can run it but after a few moments running it crashes/closes. [af@andre ~]$ export QT_PLUGIN_PATH=$QT_PLUGIN_PATH:/opt/lib32/usr/lib/qt/plugins [af@andre ~]$ skype Dis