Need Logic for writing the User exit

Hi Gurus,
I am writing the User Exit code to populate the 'Valid to' field in the data source.
Technical Name - DATUB and Type- DATS
I am using the FM 'GET_STPO"
My extract structure has following fields.
MANDT
MATNR
WERKS
STLAN
STLNR
STLAL
STLTY
STLKN
STPOZ
DATUV
IDNRK
PSWRK
MEINS
MENGE
MTART
DISMM
DATUB
I am not getting the DATUB value for some of the BOM Node Numbers(STLKN).
Please suggest me as How Can I write the code?
Thanks a lot.
Shalaka.

Hi ,
You can also try this :
int countold = 0;
int countnew = 0;
int k = 0;
for(int i =0;i<var1.length;i++)
countold = countnew + 1;
countnew = countnew + Integer.parseInt(var1);
for( int j = countold-1 ;j<countnew;j++)
result.addValue(var2[k]);
k++;
result.addContextChange();
Regards,
Ganesh

Similar Messages

Need logic for calculate the balance quantity in open sales order

hi all
i need logic to calcuclate the balance quantity in open sales order ,
where i am using VBAK header and VBAP item , and VBFA for document flow tables
i need to have the balance quantity , for the open sales order
especially taking with respect to VBFA-VBTYP_N = M for invoice creation and N for canellation
any one please help me

thank you but i am clear abt it
will you please anyother way to calucaluate the logic ,
and i need to populate in bukets also for the terms of 5 years
Edited by: sridhar loganathan on Nov 25, 2008 6:43 AM

Required the transaction code for the user exit

Hi Abap Gurus,
        i want to find out the *sap transaction code for which the user exit belongs to from the below code i am getting the enhancement name and the type.
i want to know the transaction code for exit EXIT_SAPLMEKO_002 and EXIT_SAPLFYTX_USER_001
data: begin of it_modsap occurs 0,
        name   type modsap-name,
        typ    type modsap-typ,
        member type modsap-member,
      end of it_modsap.
type-pools:slis.
data:wa_layout type slis_layout_alv.
data:it_sort   type slis_t_sortinfo_alv.
data:wa_sort   like line of it_sort.
parameters:p_exit type modsap-member.
select * from modsap into table it_modsap where member = p_exit.
read table it_modsap index 1.
select * from modsap into table it_modsap where name = it_modsap-name.
wa_layout-colwidth_optimize = 'X'.
wa_sort-fieldname = 'NAME'.
wa_sort-tabname   = 'IT_MODSAP'.
wa_sort-up        = 'X'.
append wa_sort to it_sort.
clear wa_sort.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
    i_callback_program = sy-repid
    i_structure_name   = 'MODSAP'
    is_layout          = wa_layout
    it_sort            = it_sort
tables
    t_outtab           = it_modsap.

HI
The user exit EXIT_SAPLFYTX_USER_001 is trigered for the below transactions and also postings via IDOC.
'ME21' 'ME21N' 'ME22' 'ME22N' 'ME23' 'ME23N' 'ME31L' 'ME31'   'ME32L' 'ME32' 'ME33L' 'ME33' 'ME38'   'ME39' 'VL31N' 'VL32N' 'VL33N'.
This is basically used for tax calculation purposes.
The user exit EXIT_SAPLMEKO_002 is trigerred for multiple transactions of purchansing scenario.
Also use user exit for your business scenario.
Br
Vijay V

Need the user exit/BADI name to display the error msg in PO for net price

Hi
I have the below requirement.
While creating the PO(Purchase Order) with reference to PR(Purchase Requisition),if the net price value
is 0.01 USD then the system will display a pop up a error message that 'This is a free price for PR'.
Can anybody suggest me the User Exit or BADI name so that I can implement my code.
Thanks
PILOT

ME_CHECK_ALL_ITEMS
ME_CCP_ACTIVE_CHECK
MD_EXT_SUP
ME_DEFINE_CALCTYPE
MD_STOCK_TRANSFER
ME_PROCESS_PO_CUST
These are the BADIs gettting triggered while dragging the PR's to PO creation.
You can check any of these as per your requirement.
Check if the BADI 'ME_PROCESS_PO_CUST' is useful.

Need the user exit/BADI name for Reverese order MIGo- ME21N(changing item)

Hi
I have the below requirement.
I am changing the item details in the transaction MIGO transaction,the value of MSEG entries
are got changed.and also it should change in the Purchase order level also(in the table EKKO).
Can anybody tell me the User Exit /BADI name which is triggered in the Reverse order
i.e MIGO -> ME21N.So that i can implement my code in the reverse order in the User Exit/BADI.

hi I did not find any paramater type EKPO in the Exporting or changing of any methods in the BADI's given by you...........

What are the User Exits for Sales Order creation process?

Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
Mindaugas

Please check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar

What is the user exit for automatic account determination in PO

Hi Experts
I ned to know what is the user exit for automatic account determination in PO
my client needs the document type to defines Account Assignment Category.
choosen a document type Account Assignment Category is defined automatically. you can't choose
a wrong Account Assignment Category from the drop down list.
thanks form you help.

If this is the case than why don't you use the Transaction variant
SHD0: http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm
If you have knowledge of Transaction variant then you can use SHD0 tcode and generate the transaction using default type and give that transaction to user instead of ME21N so they will not have the issue.
The exact solution for your problem is as follows
Go to Tcode SHD0 and enter the transaction variant
In T code field enter ME21N and then enter the ZXXXX or the name you want to keep in transaction variant field and hit create button
This will take you to ME21N transaction and here you just enter the data but make sure you enter the A/c which you want to default.
Once you finish system will save this one as a variant
Every time you hit or enter the pop up screen comes here you just hit enter and whichever data you want to default that you have to select in the Popup by checking the Box
W content and output only for your case the field XXXXXXXX should be selected for W content and output only
Make sure you have value 1 in contents field
If not then restart the variant again and on the ME21Nscreen reselect the invoice field
Later exit and save (save in the object which you can transport)
Then from SHD0 transaction select GOTO create variant transaction and here you careate the tcode and use that tcode for ME21N (e.g ZTRAN - For specifix sto)

Changes in the user exit for VL01N dont reflect..

Hello all,
I need a user-exit for restricting display ( and ultimately the delivery )of line-items while creating outbound delivery doc , depending on whether a particular line item is approved or not. I am currently using the user-exit (function exit)-exit_saplv50p_001 -> enhancement V50PSTAT. but the changes made to the work area is_lips in the include dont reflect in the final delivery 'item data' table . Is there any other way I can delete the unapproved line item form the final item-data table? The tables that are used in the main VL01N transaction are FXLIPS,XLIPS,L_LIPS etc. Please help me out here.
Regards,
me.

Hi
In user exit EXIT_SAPLV50P_001, IS_LIPS is an inporting parameter and changes made to this structure wont affect in any way.
You need to find an enhancement where the LIPS structure or table parameter is being exported by the function module. so that changes done to it will affect and values will be carried forward.
Regards,
Dwaraka.S

Urgent!... What is the USER EXIT for Inbound ORDERS

Hi all,
Which is the user exit used for Inbound ORDERS?
The exact requirement is for an incoming Idoc which is a PO, we have to map certain fields in the segments E1EDK01, E1EDK14, E1EDKA1, E1EDP01, E1EDP19 AND E1EDP20 for ORDERS message type. After the mapping is done, an Idoc is generated and then a SO is created.
Exact requirement :
Message Type : ORDERS
Basic Type: ORDERS05
Direction : Inbound.
USER EXIT : ????
Please help me..quite urgent.
Regards,
Anishur

Hi
I had worked on a similar requirement. We had used enhancement points for the same. Search for the function module you are going to use. Then either search for enhancement point in the same. Or search for the call statement in the code. Enhancement point can be searched by clicking the spiral button on the toolbar and then navigate to edit -> enhancement operations -> show enhancement options.
Anyways you can find the same with the following program.
Find the available exits with the following program:::
*& Report ZFINDUSEREXIT
report zfinduserexit.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
execute it, enter the transaction for which enhancement is needed and then execute.
Please do reward if useful
Regards
Dinesh

Need to know the user exit to change unlimited check box in delivery tag

Need to know the user exit,
To change the unlimited check box(EKPO-UEBTK) in delivery tag of item details for tcode ME21N/ME22N on SAVE.
Thanks in Advance.
Baburaj

HI Baburaj,
Use the BADI ME_PROCESS_PO_CUST to change the unlimited check box(EKPO-UEBTK)
Implement the BADI and insert the code in the method PROCESS_ITEM
Example code :
*Data Declarations
DATA: ls_mepoitem TYPE mepoitem,
 ls_mepoitemx type mepoitemx,
 ls_customer TYPE mepo_badi_exampl,
 ls_tbsg TYPE tbsg.
INCLUDE mm_messages_mac. "useful macros for message handling
*here we get item data
ls_mepoitem = im_item->get_data( ).
*work area for price value
data : begin of it_eban,
banfn type mepoitem-banfn,
bnfpo type mepoitem-BNFPO,
pries type mepoitem-NETPR,
end of it_eban.
*Get the Purchase requisition price from EBAN table
select single banfn bnfpo preis from eban into it_eban
 where
 banfn = ls_mepoitem-banfn
 and bnfpo = ls_mepoitem-bnfpo.
*if entry is available.
if sy-subrc eq 0.
*check if price is zero
 if it_eban-pries EQ 0.
*if zero, set FREE field of PO to 'X'.
 ls_mepoitem-uebtk = 'X'.
 endif.
 endif.
*Set updated fields
CALL METHOD im_item->set_data
EXPORTING
im_data = ls_mepoitem
Reward if Helpful*****

How to find the user-exit for transaction fpp2

Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.

Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc,     "SAP® Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP® Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
Find SAP® Modifications
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar.

How to find the user exit for order cancellation

I want to find the user exit for order cancellation. And also to ensure that no one amends the order once the canellation has taken place. The cancellation shall be deemed to be affected only if the vendor has confirmed the acknowledgement of the order cancellation.
I have got a Zreport where this order should not come as open order item.
Please tell me the method of finding the users exit for order cancellation and stop the order from getting modified. And also how to find the tables in which the data has to be updated that the order has to be cancelled.
In the PO header i want an additional tab <cancellation> by which the user by the help of userid and password should be able to cancel the order. An order once cancelled cannot be undone. A new order has to be placed. The new order can be placed refencing the cancelled purchased order.
My client has got a very stringent requirement. In the past cancelled order has been undone and caused lot of problems.
Regards.

hi
pls tell me t.code so that i will send all user exits related to that particular t.codes
Thanks & Regards
phaneendra

How to find the user exit for a screen..

Hi,
plz help me how to find the user exit for a screen..?
Regards
Anbu

Hi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
    tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
      WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
        WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
        WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'FUGR'
        AND obj_name EQ enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object IN ('SMOD', 'SXSD')
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(105) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
      SORT jtab BY object.
      DATA : wf_txt(60) TYPE c,
      wf_smod TYPE i ,
      wf_badi TYPE i ,
      wf_object2(30) TYPE c.
      CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
      LOOP AT jtab INTO wa_tadir.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Enhancement/ Business Add-in',
          41 sy-vline ,
          42 'Description',
          105 sy-vline.
          WRITE:/(105) sy-uline.
        ENDAT.
        CLEAR wf_txt.
        AT NEW object.
          IF wa_tadir-object = 'SMOD'.
            wf_object2 = 'Enhancement' .
          ELSEIF wa_tadir-object = 'SXSD'.
            wf_object2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 wf_object2,
          105 sy-vline.
        ENDAT.
        CASE wa_tadir-object.
          WHEN 'SMOD'.
            wf_smod = wf_smod + 1.
            SELECT SINGLE modtext INTO wf_txt
            FROM modsapt
            WHERE sprsl = sy-langu
            AND name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
For BADis
            wf_badi = wf_badi + 1 .
            SELECT SINGLE text INTO wf_txt
            FROM sxs_attrt
            WHERE sprsl = sy-langu
            AND exit_name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 sy-vline,
        2 wa_tadir-obj_name HOTSPOT ON,
        41 sy-vline ,
        42 wf_txt,
        105 sy-vline.
        AT END OF object.
          WRITE : /(105) sy-uline.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) sy-uline.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , wf_smod.
      WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat.

How to find the user exit for infotype 2013 ?

Hi All,
How to find the user exit in infotype 2013? i want to change the drop down list default value in infotype 2013.
Thanks,
Srikanth P

reward points if useful
User exit name is PBAS0001.
code should be written in ZXPADU01 for PBO
ZXPADU02 for PAI.

To find the User Exits for a particular Transaction.

hi,
    I want to find the number of User Exits for a The Transaction MM01 or MM02,
    I serched in the forums but could not find satisfactory ans,
    I tried with:
             T.Code-> System>Status->Prog Name>SE38>find Call Customer-Exit.
    But its not helping me,
    Please help me.
Thanks and Regards
Suraj S Nair.

hi ,
if you are new to user exist use --> follw the below methos to find the user exit for a particular transaction or t-code
create one custom pgm in se38 and execute >selection screenenter t-code and execute it will return all the user exists for a specific transaction..
Finding the user-exits of a SAP transaction code
* Finding the user-exits of a SAP transaction code
* Enter the transaction code in which you are looking for the user-exit
* and it will list you the list of user-exits in the transaction code.
* Also a drill down is possible which will help you to branch to SMOD.
* Written by : SAP Basis, ABAP Programming and Other IMG Stuff
*              http://www.sap-img.com
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
Regards,
Prabhudas

Need Logic for writing the User exit

Similar Messages

Maybe you are looking for