Need lots of help

I have tried to hook my ipod g4 touch and I tunes does not recognize it at all. I have been on the phone with Apple for the last 4 1/2 hours. My computer sees it as a camera and opens up the autoplay window. My Ipod still shows on the usb cord and I tunes symbol on the screen. Any Ideas? I have reinstalled I tunes,cleared my temp folder, and everything else they have told me to do. The driver shows up on my usb connection but I tunes does not pick it up. I can put my older Ipod on and that is recognized by itunes and will sync but this one will not. The battery is fully charged.Please anybody give me some ideas.
Thanks

I have a ASUS M4A785-M motherboard. Do you think that could be the problem?
... not in the way I was thinking. There have been some issues with motherboards using the Intel 5-series chipsets on Windows 7 systems (particularly the P55s and PM55s). But your motherboard has an AMD chipset, so that particular issue can't be in play here.
Still we'd probably better check on BIOS versions just in case. Do you have the latest ASUS bios for your board? Here's a link through to the ASUSTek downloads site ... the ASUS navigation wizard might be the easiest way to check if there are newer versions available for you:
http://support.asus.com/download/download.aspx?SLanguage=en-us

Similar Messages

Ok i need lots of help here... i have a WRT54G router and...

ok i need lots of help here... i have a WRT54G router and trying to hard wire a computer to it and wirelessly connect to a laptop... i have dsl internet connection... the power light is blinking constintly and when i try to setup the router the default password doesnt work already tried to reset the router and that didnt help... any thoughts> thanks

the power led blinking all the time can be caused by a corrupt firmware, or a defective power adapter, try doing a hard reset, you may need to do it a couple of times, and then power down both the modem and router.
after a couple minutes, power up the modem, wait for the link led lights up, then power up the router and look for it to link up with the modem, at this time the power led on the router should be on solid if all is ok.
if it still don't light solid, you may need to do a firmware update, or the router is defective.

Need a little help with G3 Clameshell...Please

I just received this Clameshell, and it only has OS9 on it, I haven't used 9 in forever, and really need to get OSX on it. I have retail Panther cd's. But I hear I need to update the firmware, if it isn't updated yet.
I know I can find out which I have in System Profiler, but I can't find it in there. Is it called something else? What part of System Profiler is it in(in OS9).
Also, I have Cable net, this Clamshell was always used with dial up, how can I switch things around in it so I can hook up my ethernet cable and run with it? Is that possible with OS9? Or will I have to update the firmware a different way.
I am stuck. Need lots of help.
Thanks!!!
veganjustice

Is it called something else? What part of System Profiler is it in(in OS9).
It is in the field called "Boot ROM".
...how can I switch things around in it so I can hook up my ethernet cable and run with it?
Open the TCP/IP control panel. Configure it to use Ethernet and DHCP to get an IP address.

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

I had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded..., i had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded... I need a lot of help please.

i had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded...,. I need a lot of help please

Do the tracks show up in the Recently Added playlist? If so then something has gone wrong with the index of the Music playlist. Download the current iTunes Free Single of the Week. I know it sounds odd, but it should fix the problem. (Probably adding anything would do.)
If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up.
tt2

Need a little help new to mac

Need a little help I'm new to Mac.. i have had my ibook for over a year now and i like it a lot, but some times my usb post dies on my for a couple days maybe weeks. Ill have my ipod connected and when i go to plug in a flash drive. It doesn't detect my ipod anymore and my usb port don't work. it says that they were "removed improperly" and now they are not working again..i have tried to reinstall the whole os again and that doesn't work i don't have the hardware test disk so i don't know what could be the problem i know its not the logic board is there any test i can do to it to find out the problem its an ibook late 2001... there is no reset button on it. i tried to hold in the space bar and now when i boot up i get prompt to this screen that shows the world and then a folder with a ? mark but then after a few sec it boots right up im a mess need some help

+it says that they were "removed improperly"+
You have to go to the iPod's icon on your computer (or the flash drive's icon), select it and eject it there before removing it. Otherwise, data can be corrupted and/or lost. Repeatedly removing it without ejecting it from the desktop can cause it not to be recognized any longer.
If your iBook is a "late 2001" model. It should have a reset button. Check out the chart here to make sure which model iBook you have:
http://support.apple.com/kb/HT1772?viewlocale=en_US
+i get prompt to this screen that shows the world and then a folder with a ? mark but then after a few sec it boots right up+
It's trying to find a network volume from which to boot.
Once it's booted up, go to System Preferences > Startup Disk, and select your Mac OS X startup volume. Then close System Preferences. The next time you start up, it should start up without looking for a network volume.

Photoshop Elements 7: Newbie Needs Drop Shadow Help, Please

Hello.
I'm brand new to Adobe Photoshop Elements 7 and need help with the Drop Shadow feature, please.
I've read the documentation, but it's not crystal clear to me, so maybe someone can guide me through it.
I want to create text on a blank white canvas, and add a little bit of drop shadow to it. That's all I want to do--plain and simple.
I can create the text, but I can't for the life of me find any drop shadow options.
The documentation I'm using is the on-line, web-based help. I type in Drop Shadow in Search, and select Add Text to a Slide.
The third step says, "In the Properties palette, set any of the following options" and then offers some options, including Drop Shadow and Drop Shadow Color.
I'll be darned if I can locate the Properties palette. Obviously, I'm not well-versed with Photoshop, so if anyone can just steer me towards this feature, I'll take things from there.
I know this is probably rock-bottom basic, but I'm stumped. Thank you!
J. Danniel

I need a lot more help with this than I thought.
The problem I'm having is this: After creating the drop shadow effect, when I try to save the image as a transparent GIF, it quite simply.... looks horrible.
Here is what I'm doing in detail:
1. New/Blank File.
2. Blank File is set to transparent. (Is this the right way to make a transparent GIF?)
3. Creating text.
4. Cropping text.
5. Selecting drop shadow effect.
Now, here's where I get confused. Do I just select File/Save As, or File/Save For Web?
When I just use File/Save As, and select the GIF format, the drop shadow effect in the final file looks horrible when I embed the image into a web page. The text looks good, and the file is transparent, but the effect is ugly.
When I try to use Save for Web, there is a Before/After screen. The Before side looks decent; the After screen looks horrible, too.
So, now I don't know what to do. Can you or anyone guide me through this a bit further, please? Thank you! Jd

Need some quick help - fairly urgent!

I've just taken over a new job and have been the task of finishing the new brochure for Christmas, there's not a lot to do but a lot of the measurements need changing
This is the layout I'm dealing with..
All the boxes have been made in Illustrator
The text has been done in In'Design and it seems every piece of text is it's own box if that makes sense
My question is, if I select the whole specification box - copy, paste it into Adobe Illustrator and change the text there, then paste the edited box back into In-Design, will I lose quality when it gets printed?
I'm worried if I do it this way it may come out blurred? Or am I just worrying about nothing?

I couldn't find an Illy file in the end and have ended up creating tables in ID to replicate what was already there!
Didn't take very long and I guess if I didn't do it now, I'd come across the same situation next time!
Date: Wed, 30 Nov 2011 08:48:07 -0700
From: [email protected]
To: [email protected]
Subject: Need some quick help - fairly urgent!
    Re: Need some quick help - fairly urgent!
    created by Peter Spier in InDesign - View the full discussion
There certainly are viable "quick fix" solutions proposed here, and if the dealine is looming and this file never needs to be touched again I might be tempted, but they are only postponing the pain for a file that needs periodic updates, and I wouldn't waste effort on them, myself, when that time can be put toward a proper rebuild now if that's the ultimate goal.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4054725#4054725
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4054725#4054725. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I need abap oops help docu?

i need abap oops help docu?

Hi Karthikeyan,
Chk this standard Programs.
ABAP_OBJECTS_ENJOY_0 Template for Solutions of ABAP Object Enjoy Course
ABAP_OBJECTS_ENJOY_1 Model Solution 1: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_2 Model Solution 2: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_3 Model Solution 3: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_4 Model Solution 4: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_5 Model Solution 5: ABAP Objects Enjoy Course
DEMO_ABAP_OBJECTS Complete Demonstration for ABAP Objects
DEMO_ABAP_OBJECTS_CONTROLS GUI Controls on Screen
DEMO_ABAP_OBJECTS_EVENTS Demonstration of Events in ABAP Objects
DEMO_ABAP_OBJECTS_GENERAL ABAP Objects Demonstration
DEMO_ABAP_OBJECTS_INTERFACES Demonstration of Interfaces in ABAP Objects
DEMO_ABAP_OBJECTS_METHODS Demonstration of Methods in ABAP Objects
DEMO_ABAP_OBJECTS_SPLIT_SCREEN Splitter Control on Screen
links for OO ABAP.
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com.
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
some more materials.
Go through the following Documents Links & Materials for ABAP Objects
check the below links lot of info and examples r there
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
/people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
check the below links lot of info and examples r there
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
OO ABAP is nothing but a class-method apprach to write ABAP codes and define them : below are few of the informations which will be of help for a newbie :
Types of attributes and the basic concepts :
Public attributes
Private attributes
Instance attributes
Static attributes
Public methods
Private methods
Constructor method
Static constructor
Protected components
Polymorphism
Public attributes
Public attributes are defined in the PUBLIC section and can be viewed and changed from outside the class. There is direct access to public attributes. As a general rule, as few public attributes should be defined as possible.
PUBLIC SECTION.
DATA: Counter type i.
Private attributes
Private attributes are defined in the PRIVATE section. The can only be viewes and changed from within the class. There is no direct access from outside the class.
PRIVATE SECTION.
DATA: name(25) TYPE c,
planetype LIKE saplane-planetyp,
Instance attributes
There exist one instance attribute for each instance of the class, thus they exist seperately for each object. Instance attributes are declared with the DATA keyword.
Static attributes
Static attributes exist only once for each class. The data are the same for all instances of the class, and can be used e.g. for instance counters. Static attributes are defined with the keyword CLASS-DATA.
PRIVATE SECTION.
CLASS-DATA: counter type i,
Public methods
Can called from outside the class
PUBLIC SECTION.
METHODS: set_attributes IMPORTING p_name(25) TYPE c,
p_planetype LIKE saplane-planetyp,
Private methods
Can only be called from inside the class. They are placed in the PRIVATE section of the class.
Constructor method
Implicitly, each class has an instance constructor method with the reserved name constructor and a static constructor method with the reserved name class_constructor.
The instance constructor is executed each time you create an object (instance) with the CREATE OBJECT statement, while the class constructor is executed exactly once before you first access a class.
The constructors are always present. However, to implement a constructor you must declare it explicitly with the METHODS or CLASS-METHODS statements. An instance constructor can have IMPORTING parameters and exceptions. You must pass all non-optional parameters when creating an object. Static constructors have no parameters.
Static constructor
The static constructor is always called CLASS_CONSTRUCTER, and is called autmatically before the clas is first accessed, that is before any of the following actions are executed:
Creating an instance using CREATE_OBJECT
Adressing a static attribute using <classname>-><attrbute>
Calling a ststic attribute using CALL METHOD
Registering a static event handler
Registering an evetm handler method for a static event
The static constructor cannot be called explicitly.
Protected components
When we are talking subclassing and enheritance there is one more component than Public and Private, the Protected component. Protected components can be used by the superclass and all of the subclasses. Note that Subclasses cannot access Private components.
Polymorphism
Polymorphism: When the same method is implemented differently in different classes. This can be done using enheritance, by redefining a method from the superclass in subclasses and implement it differently.
Reward points if helpful.
Regards,
Harini.S

I need a little help

hi i need a little help making a java applet rpg with log-in, chat, etc. and i dont really know to much about it and dont understand applet programming too much. If anyone could help, it would be appreciated. Also, since i am fairly decent at making/improving websites, if you help me i could make a website for you or improve one you already have. You can email me if you want to help at "[email protected]"

Don't just give up. Like I said, start small.
I've never heard of any pre-made RPG java classes.
Why don't you poke around on SourceForge or some java-centric project site or one of the java gaming sites. Maybe someone has written all these libraries already, although you may have trouble using these classes if you're not familiar with programming in general and java in particular. Or do a Google search.
But using a specialized API is a lot easier if you know how to use the general API (i.e., j2se).
Another option of course is not to use java at all. Many commercial games come with an editor; you may find it easier to get one of those and do a mod.

In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC' so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or Tip

In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC' so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or some Tips.I have already tried many things to iTunes and my PC like trying to restore my PC but that do anything.Also,would it be fine if i contacted (call) Apple Support? Please,I need help because what I think is wrong is my PC,iPhone,or USB might be messed up so if anyone could help me with this,it would be really helpful and for anyone to be nice enough to help me.

I think this article will help you.

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

Hard Drive Failure on HP DV 6000 Pavilion laptop Windows-XPsp3 OS - Need Data Recovery Help

Hard Drive Failure on HP DV 6000 Pavilion laptop - Need Data Recovery Help
HP Pavilion DV 6108 NR, RG365UA, purchased in late 2006 at Best Buy, with Windows XP, upgraded to Service Pack 3. It has a Fujitsu hard disk, 60 gigabyte, partitioned into C: and a Recovery D:.
Windows tries to boot up, but goes to blue screen with the message: "Unmountable Boot Volume" for one second, then just keeps recycling until I force a shutdown.
BIOS Phoenix, hard drive test result: " #1-08 Fail "
I ran a disk analysis/recovery program on the Cdrive and it seemed to show the directory structure intact, and it was able to recover some files. I was using the free one from Seagate (which only recovers small files). The second pass didn't run so well, and during the third run the program said I should not proceed further, and I should contact a professional disk recovery company.
However, the D drive seems to be intact, so, I wonder if the disk is corrupted or just some aspect of the logical C drive is bad.
How can I get the D: to run the recovery software on it? The recovery disks, made by Best Buy, only proceed to the R / F / Q option screen, and when I press R, I get a blue screen every time.
Tapping the F10 key during startup gets me nowhere. Ditto the F11 key.
I dont care about the hard disk; it is the data (files, docs, images, etc) that I want.
I contacted HP to order recovery disks but they are no longer available for my computer.
Any suggestions would be greatly appreciated!
Jon
This question was solved.
View Solution.

Update...
I found a website that offers the following:
http://www.computersurgeons.com/p-13442-recovery-kit-435422-001-for-hp-model-number-dv6108nr.aspx
Recovery Kit 435422-001 For HP Model Number dv6108nr
Price: $27.00
Recovery Kit Set (An Entire Image of the Computer hard drive when the computer was new)
But I wonder how useful it would be. Early XP , no doubt. And if my hard disk problem is a mechanical fault, would any recovery disk even work? The disks made by Best Buy when I bought mine new in 2006 don't do anything more than go to the R /F/ Q screen and then goes to a blue screen when I press R (to recover the OS and apps and data files). And, as I wrote, it is the data that I want, not the disk drive.

I need some help adding music to my slideshow in iPhoto. When I open iTunes as the source, it says it needs to be open to populate, which it is. I have no knowledge of computers...like, at all....so I need some (simple) help? If possible? Thanks.

When I open iTunes as the source, it says it needs to be open to populate, which it is. I have no knowledge of computers...like, at all....so I need some (simple) help? If possible? Thanks.

When I open iTunes as the source, it says it needs to be open to populate, which it is. I have no knowledge of computers...like, at all....so I need some (simple) help? If possible? Thanks.

In need of desparate help (newbie)

so my plan is simple. from the execute query i bring back multiple resultsets, which i then populate into a vector. then this vector must be redirected to a JSP to iterate through a loop and display the results.
here is my following code:
test.java
Vector vRecords = new Vector();
while(rs.next()){
temp.setMarkerId(rs.getInt("markId"));
temp.setFirstName(rs.getString("markFName"));
temp.setLastName(rs.getString("markLName"));
temp.setAddress(rs.getString("streetAddress"));
temp.setCity(rs.getString("city"));
temp.setProvince(rs.getString("province"));
vRecords.add(temp);
request.setAttribute("markerList",vRecords);
//response.sendRedirect("../results.html");
RequestDispatcher disp = request.getRequestDispatcher("../../results.jsp");
disp.forward( request, response );
dbConnection.close();This is my error message:
Mar 13, 2005 11:12:48 PM
org.apache.catalina.loader.WebappClassLoader validateJarFile
INFO: validateJarFile(C:\jakarta-tomcat-5.5.8\webapps\ROOT\WEB-INF\lib\servlet.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
java.lang.NullPointerException
please and thanks. i am in need of desparate help.
johnny.

The problem might be due to some other servlet JAR which is already loaded and using a different version of servlet specifications. Check your Classpath for other JARs present.
$Carol

Need lots of help

Similar Messages

Maybe you are looking for