Need major help, I have a WRT54G Wireless-G Router and theres too much Lag with My Xbox 360...

I cant host a game on Gears of War no more on my xbox 360 cuz it also drops and when i play on someone else's game, i get dropped from the middle of a game.
I have Comcast Hi-Speed Internet and that shouldnt be a problem,
I have my PC and my Xbox 360 hooked up and thats it,
On my computer i have McAfee Security, but i dont kno if that would slow it down??
Well when i unplug my router, and do a direct connection to my xbox 360, it is pretty **bleep** good connection. So what is there I can do to fix this slow connection with the router being hooked up?? i have my router in the same room too as my pc and 360.

yes the ethernet cord is hooked from the xbox 360 to the router

Similar Messages

I have been using WRT54G wireless broadband router and WU...

I have been using WRT54G wireless broadband router and WUSB54G on my home PC for the last 2 years. It was working fine until recently I encountered serious connection problem.
The WUSB54G cannot connect with WRT54G.
Error message " Cannot assocaite with the access point.
I have checked the followings to try and solve the problem.
1) Refresh site survey the WUSB54G does not show my SSID, but it can show my neighbour'sSSID.
3) When I use my notebook with built-in wireless network adaptor to access wirelss broadband there is no problem at all. I can access my SSID.
4) I have try reseting the WRT54G and changing password but still can not solve the problem.
5) Uninstall and re-install
5) I have installed a new USB adapter (WUSB54GG) thinking that it could be the old WUSB54G is faulty. But still encounter same problem.
I am using Window XP Professional. What could be the problem?
Please provide your professional advice. Thank you.

Hi, Try to update firmware of router. You can get latest version from www.linksys.com/download, Hope it will help you

I must close mu iCloud account on my iphone but can't came in. Have no password and can't get a new one, have not the emailadress any longer and there is something wrong with my securityquestions.

i must close mu iCloud account on my iphone but can't came in. Have no password and can't get a new one, have not the emailadress any longer and there is something wrong with my securityquestions.

Hello Malin1951,
Thank you for contacting Apple Support Communities.
The following article should guide you through resetting your iCloud password so that you can close it on your iPhone.
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Regards,
Jeff D.

I need help setting up my Apple wireless network so that there are no conflicts with IP addresses for any of my devices.

I have 2 Airport Extreme Base Stations, 1 is a 5th generation 802.11n and 1 is a 2nd generation 802.11n. I have 2 Extreme Express Base Stations which are 2nd generation 802.11a/n. The idea is to create a network that works throughout my 2 story house and extend into the garage. It's not a large house 1400 sq ft wood construction. The internet feed comes into the Hughes Net modem upstairs. This is where I want the main base station (5th generation). I eventually will connect a network drive and printer to it. I then want to place the second base station in the room directly under the upstairs room where the main base station is and connect my desk top computer to it. In the living room I will have one of the Express Base Stations connected to the Micro Cell and house stereo system. In the garage (50' away from the living room Express Station & 75' from the Main Base Station) I will place the other Extreme Express Base Station to be connected to the garage stereo system. All of this is with the idea to extend the range of my network for all my devices and airplay to my stereo systems.
Ok, so I have a lot of wireless devices. 2 2nd geneartion iPads, 2 iPhone 4s's, 3 Wi-Fi enabled Sony TVs, Apple TV (near the house stereo Extreme Express), AT&T Micro Cell connected to house stereo Extreme Express, Lorex Security DVR system (connected to main base station upstairs), Whole-House DTV Network system,1 Macintosh Quicksilver Desktop computer, 1 MacBook Pro, and 1 Mac AirBook. As you can see I need a lot of DHCP IP addresses.
So, how do I go about setting this all up? I have read countless articles and discussions but I still have conflicts. It usually mostly, but not limited to, effects my wife's AirBook. Not good at all! I used to have a WDS setup but I understand that the 802.11n Airport Extreme's do not support this. And when I try to distribute a range of IP addresses I run into problems. So can someone please help me resolve this headache?

Configure the Extreme connected to the Hughes Net modem as your router. In other words in AirPort Utility, Network tab > Router Mode should be set to "DHCP and NAT". It will provide IP addresses to all the devices on your network.
All other AirPort devices on your network should be configured as bridges: Router Mode "Off".
You may want to configure static IP addresses for any equipment that is likely to be permanently installed. For them, there is no reason to have the Extreme issue an IP address, and they can keep the same one forever.
The Microcell may be able to connect to the Express's LAN port such devices that have to handle voice or other real time audio or video streaming are generally best installed using a strictly wired connection. The same applies to the Sony TV and AppleTV. Keep them on a wired LAN served by the Extreme, avoiding any reliance on a wireless link if at all possible.
The way to implement a complex network like yours is to add one device at a time. Ensure it connects reliably, then add another. You have a lot of work to do.
WDS can be implemented even with new Extremes but its performance is likely to be so unacceptable that it would be nothing more than an exercise in frustration for you.

WRT54G Wireless G Router and PS3

Hi there, I am a proud owner of the above mentioned items. The reason why I am posting this is that when I am playing on the PlayStation 3 and one of my other family members are on a hardwired computer, the hardwired computer I believe looses it's connection to the internet, but my PlayStation is still connected to the internet, and it works very good. My setup for my network is I have a laptop, Nintendo Wii, and PS3 connected wirelessly, and I also have two hardwired computers. I asked around on the internet, and other people said that I should not be having issues, and if I were that it might be something wrong with the firmware of my router. I do have the router fully updated with the latest firmware, so don't recommend that to me. So my question is, is anybody else having a similar issue, or am I just all alone on this, and is this a firmware issue, and if so, is Linksys doing anything to fix this issue? In case if anybody was interested, I have the version 6.0 of the WRT54G router.

Make sure your firmware is up to date. If not, upgrade it, reset and reconfigure the router.
The box said windows xp or better... So I installed Linux!

Linksys WRT54G Wireless-G Router Not working

I have a Linksys WRT54G Wireless-G Router and it has worked good for a couple months and yesterday it stopped. When I plug it in all the lights are lit even though there arent any ethernet cables connected and the power light blinks constantly. I tried holding the reset button on the back and it didnt help. Anyone know whats wrong or anything I can try to fix it?

You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

Need Urgent help, I have made partition hard drive in my mac book and using OS mac

Need Urgent help, I have made partition hard drive in my mac book and using OS mac & Window8 seperately... for couple of days it works great for both window & OS mac But nowadays, my pc gets restart automatically while using window & even I cant access to my Mac OS........... I got some error in window (error80070003) ...>>>>> Now how can I format whole drive & recover my Mac book OS.without boot disk.

I can't find that model. If you open System Profiler in the Utilities folder look for the Model Identifier over in the right hand display. What do you find for the model ID? If your computer supports Internet Recovery here's what to do:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. If Mavericks is not installed, then you can reinstall it by re-downloading the Mavericks installer.
You will need to use Boot Camp Assistant in order to create a new Windows partition, then reinstall Windows.

I have a WRT54G wireless router. The issue I have is th...

I have a WRT54G wireless router.
The issue I have is that the "wireless network connection" icon light on my laptop stays on continuously and is constantly sending and receiving data even when nothing is open...no Outlook, no browser, no programs.
I have another another desktop PC that is connected thru the same wireless router and the icon light only lights when I open a browser or transmit and receive data thru an action of mine.
With my laptop, as soon as I boot it up, the icon light comes on and stays on with all this data sending and receiving.
Does anyone have any ideas?

You can try to see what connections are active when your laptop is connected. If you're using Windows, bring up command prompt, type "netsat" and see what connections are active to what target(s). Check Task Manager and see what applications or processes are active and using the cpu. Maybe try installing a third-party firewall (ZoneAlarm) that monitors inbound and outbound connections to determine if any rogue applications are running.
"Everybody save your work.......NOW!!"

I have a WRT54G Wireless modem with firmware version 1.02...

I have a WRT54G Wireless modem with firmware version 1.02.1 Mar 4 2003. i down loaded the latest firmware for the modem but i can't install it. I get the erroe message"incorrect image file".
What is wrong?

Which version of the WRT54G do you have? If it is not clearly stated on the router, go to Wikipedia.org and search for WRT54G, then you can use your router's serial number to determine which version of the router you own.
The version of the router is important. Each version has a different set of hardware in it, so each version takes a different firmware.
You can only load the firmware that corresponds to your model and version.

HT3606 I have Mac OS X version 10.5.8 and so im wondering what is the next step i need to get. i have tried to get snow leopard and other things and not having any lukck . can any one help me out pls.

I have Mac OS X version 10.5.8 and so im wondering what is the next step i need to get. i have tried to get snow leopard and other things and not having any lukck . can any one help me out pls.

If your Mac meets these requirements:
http://support.apple.com/kb/SP575
then you can order a Snow Leopard disk and install it.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao.

Hello plz i need yours help i have problem with my i cloud back up when i restore old back up t

hello >> plz i need yours help i have problem with my i cloud back up when i restore old back up my problem exact with contact cause it disappears from contact list

iPhone: Transferring information from your current iPhone to a new iPhone

Hi i need you help, I have lost my iphone yesterday . Still my mobile is ringing. I want to know the location of my phone.

Hi i need you help,
I have lost my iphone yesterday .
Still my mobile is ringing. I want to know the location of my phone.
I did't installed the Findmyiphone App.
I have purcheased last month only.
Please Please Please help me.

Hi I have't sync my device with Icloud till now.
so I am not able to login with Apple id.
Any other posibilities?

I currently have a WPN824 v3 Netgear router and I'm trying to set up my Apple TV. I'm able to connect it to my wireless network but my airplay feature is currently not working.

I currently have a WPN824 v3 Netgear router and I’m trying to set up my Apple TV. I am able to connect it to my wireless network but my airplay feature is currently not working. The icon does not appear on any of my devices. My ipad and ipones all are currently up to date and are all joined to the same network. Is it the way that my router is configured. Please help let me know what I need to change in my router settings or does my router not work with Airplay. Or is there a simple fix.

you don't mention which products you use
only ipad2 and up support mirror
and only iphone4s and up support mirror
other devices only use airplay for apps which support tvout options

HT3574 If i have AT&T as my services is it necessary to have iTunes installed on my pc and or laptop to tether with USB or wirelessly...??

BIf i have AT&T as my services is it necessary to have iTunes installed on my pc and or laptop to tether with USB or wirelessly...??

Well, in order to check, you'd need to tell us exactly what those plug ins are and/or provide a link to them. Most streaming or playing of the channels you mentioned do require "help" in the form of a plug in; some of those work great, others only haphazardly, and some not at all/may cause a problem.
FWIW, whatever site you visit online, knows exactly what equipment you are on simply because you went there. So, they should not be demanding/offering you a plug in that isn't meant for your platform (which, by the way, is not iOS, but Mac OS 10.9.5 - iOS is for iPads, iPhones, etc).

I have OS X 10.4.11 and I just got home with my new ipod nano and I need to update my OS! How do I do this?

I have OS X 10.4.11 and I just got home with my new ipod nano 6th generation and I have after searching threads etc discovered I need to update my OS! How do I do this - all of the posts on this subject are a bit out of date I think? I have a mac book pro 2.2 so I know I can run Leopard, I just have no idea how to get it...? Please help!

Check your Mac against hardware specs to find out what version of OS X you can upgrade to.
Then buy DVD for that version.
Allan

Need major help, I have a WRT54G Wireless-G Router and theres too much Lag with My Xbox 360...

Similar Messages

Maybe you are looking for