Need major help with websites not loading...

So I have done what I think is everything... some websites just don't load... they tell me... that the server dropped the connection or that it timed out.
So, I've worked with my dsl provider and they even came out with a computer (PC) and the websites seemed to have worked for them. I reloaded the operating system... nothing seems to be working... I even tried to browse with the firewall not on. Help. Please... I need to call Applecare again but this is making me crazy...

Hi there!
I agree with Al Van, you should post a couple of URLs for all to check out. You should also give a few more details, type of browser and type of connection (wireless or ethernet).
Here's a good link to check on your connection speed and quality of connection: http://myspeed.visualware.com/ - this uses Java, if you have difficulty with this link post back.
I surf the web with both a Mac and a PC and have never had problems loading websites on either computer (unless they were offline). I occasionally will run into sites rendering differently on each computer. The problem you described "the server dropped the connection or that it timed out. " is a connection issue or your Mac is taking "too long" to gather info and rendering page...
Post back with more details... Rick
you can try this link: http://alertra.com/spotcheck.php to check if the sites you cannot reach are off line...

Similar Messages

Hi guys, need your help with iCloud notes on Mac 10.7.5; I've found this feature's more useful comparing with stickers, however can't pin notes to desktop or dock, "double click"on the note doesn't work with this version of software.

Hi guys! Need you help with iCloud Notes on Mac Pro 10.7.5. I've found this apllication more useful comparing with "stickers", however can't pin it to desktop or dock. Thanks a lot in advance!

Hi guys! Need you help with iCloud Notes on Mac Pro 10.7.5. I've found this apllication more useful comparing with "stickers", however can't pin it to desktop or dock. Thanks a lot in advance!

Help with Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.

This was all working yesterday, but this morning, I cannot run in the dev fabric, or even setting the website project as a startup project directly, I get the following error:
Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'msshrtmi' could not be loaded.
=== Pre-bind state information ===
LOG: User = Andrew-VAIO\Andrew
LOG: DisplayName = msshrtmi
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: msshrtmi | Domain ID: 3
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue.
LOG: Appbase = file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/
LOG: Initial PrivatePath = C:\Users\Andrew\Desktop\Beko2011Azure\Website\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\Users\Andrew\Desktop\Beko2011Azure\Website\web.config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/bin/msshrtmi.DLL.
ERR: Failed to complete setup of assembly (hr = 0x8007000b). Probing terminated.
Stack Trace:
[BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +39
System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) +132
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +144
System.Reflection.Assembly.Load(String assemblyString) +28
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46
[ConfigurationErrorsException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +618
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +209
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +130
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +178
System.Web.Compilation.BuildManager.GetPreStartInitMethodsFromReferencedAssemblies() +94
System.Web.Compilation.BuildManager.CallPreStartInitMethods() +332
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +677
[HttpException (0x80004005): Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +9079228
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +97
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +258
Note that the dev machine is x64 Win7.
I have not tried deploying this to staging since the issue started as I'm a bit nervous of touching the staging/live environment until this is solved.
Removing the PlatformTarget element from the project file has no effect
Removing the msshrtmi.dll file from the bin directory of the website project ends up with
'Could not load file or assembly 'Microsoft.WindowsFabric.Common, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified'
I have used Git to revert to the last working build to no effect (But I don't have the obj/bin folders in GIT), but it has atleast reset the project files etc.
If I return msshrtmi.dll to the bin folder and switch the model and website projects to x64 there is no change
If I switch both to x86 then I get an error Could not load file or assembly 'BekoModel2011' or one of its dependencies. An attempt was made to load a program with an incorrect format.
which is the model project - presumably because to run on my x64 machine I need the 64bit version?
I really need to be able to debug and then publish some changes ASAP.
Andrew

Hi,
Is it true that you're using IIS to host the application? Could you check whether the process is x64 or x86 one via task manager or config in IIS manager?
http://blogs.msdn.com/b/rakkimk/archive/2007/11/03/iis7-running-32-bit-and-64-bit-asp-net-versions-at-the-same-time-on-different-worker-processes.aspx
Allen Chen [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Help with images not loading

My Flash page is supposed to load images from Photobucket.
However, the images are not loading. I've checked two things to see
if they have an effect:
1) Whether Photobucket has a policy file (crossdomain.xml) to
allow external access. It does.
2) Changing the allowScriptAccess parameter to "always".
Here's the HTML page where the Flash file is being used:
http://www.geocities.com/mikehorvath.geo/legopanotour.htm
The page works fine on my harddrive. I'd appreciate any help.
-Mike
[edit]
Duh! I didn't properly understand the purpose of policy
files. The domain of my own site's server needs to be listed in
Photobucket's policy file. Please ignore this message.

same damn problem I am probably having...When using IE and
deleting temporary internat files it disables/corrupts/removes
proper function of the adobe flash player....You can reinstall all
night long and it will claim a "successful" installation but, it is
not....YOU MUST FIRST UNINSTALL ADOBE FLASH PLAYER USING THE ONLY
TOOL THAT WILL DO THIS WHICH IS THE FLASH PLAYER UNINSTALLER FROM
THE ADOBE WEBSITE....BE SURE AND SAVE IT BECAUSE YOU WILL BE USING
IT FOREVER.....Once you have used the uninstaller program you can
then sucessfully and truthfully download the latest adobe flash
player.......WILL SOMEBODY FROM ADOBE FIX THIS!........
Adobe
Uninstaller at bottom of page

I need major help with the 5.0 device software!

I recently had to get a refurbished Blackberry Curve 8900 from T-mobile because my phone was no longer charging. The old one had the 5.0 update on it, this one however, does not. I know how to download it and everything, but when I am JUST about to click "finish" a message pops up that says
"Invalid Configuration
The Blackberry Device Software upgrade new features and significant enhancements to the Blackberry solution and, as such, is only available to users with an active BlackBerry subscription. To learn more about Blackberry service, please visit www.blackberry.com/service."
I don' t know what a BlackBerry subscription is.
I need help getting passed this, so I can continue on with device update.
Thanks!

Hi and Welcome to the Forums!
It is referring to a full BB data plan, the last one in this list:
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
That plan is what enables BIS -- BlackBerry Internet Service -- which enables all of the rich and proprietary features of BBs. If you had those before, then it sounds like your carrier has not completed shifting your prior account from your old BB to the new one (it is controlled by the BB PIN). I suggest you contact them for formal assistance.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem with website not loading images -

www.gsmar.com is a real estate website that shows pics of homes for sale. After entering search criteria, you have a list of properties, and the images load on this page. When you click on a property, it should load the image of the home and you should be able to click through all the pics. I haven't been able to use Firefox to look at this website since last upgrade but the "other" browsers work fine. Please help!

The JavaScript on that site isn't compatible with Firefox because document.all is used instead of document.getElementById();
See https://developer.mozilla.org/en/Mozilla_Web_Developer_FAQ#JavaScript_doesn.E2.80.99t_work!_Why.3F

I need major help with Adobe Reader!

I am a student and I need Adobe Reader for my e-books and when I click on my chapter to read it, Adobe Reader says not responding after a few seconds and closes. I have double checked the license agreement and accepted twice so I know that is not the case. I have also cleared the cookies and uninstalled Adobe Reader and re-installed Adobe Reader. Tech Support at my school can't even figure it out. Please help!! I needed to start reading my chapters yesterday! Thank you!

hrbond wrote:
I needed to start reading my chapters yesterday!
If you provided sufficient information you could get help today...
What is your operating system?
What is your Reader version?
Are these local or online files? If online, in what browser?

Need urgent help with preview (not sure where this goes)

Hi,
Ok so I have a Mac OSX and I was editing one of the best pictures I have ever drawn, I have spent weeks working on it! I was absolutely finished it and admiring it in Preview and I was using Sketchbook Pro to edit it. Suddenly Sketchbook Pro quit working then I force quit it thinking nothing would happen! Then Preview stopped working and I quit that too. When I clicked to reopen the file I could not open it! The pop up reads when I try to open it that the file may be damaged or use a file format that is not recognized by Preview. Also the icon before was a small preview of what the picture looked like and then it was turned to the default image of preview. Preview could previously open it and now it can't, the file format the picture was in was .tiff and I checked if preview could open any other tiffs and it CAN! I hadn't activated Time Share either so I can not go back before my file was damaged. This is so maddening and I hope I will not have to start all over again! Please help me!!!!

I thought you might have saved it at the transitional spot iCloud. This transitional spot iCloud automatically saves changes. If it is not there and you dont have a backup of it, I wish i knew more. Sorry. This is my open screen in preview.

Help with Apps not loading

After loading the latest iphone version, my apps wouldn't load, so I put back to factory settings and started again...now none of the apps will install on the phone, because I am not authorized for them on this computer , I have tried de-authorizing the computer, rebooting and re authorizing, then syncing again, nothing works

Same here. As per apples instructions you have to authorize each id you have. I have 2, one as a developer and one regular. I accidently installed an app under the developer id. I want to track these apps under my regular id and switched the phone and itunes over to the other id. Now nothing works.

I still am having problems with Aperture not loading, It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post wont work as it

I still am having problems with Aperture not loading, It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post doesn't work as it is for Ver 10.6.6 and I am running 10.6.7

Do you have Final Cut installed on your machine?
If so, you may want to look at this article: http://support.apple.com/kb/TS3528
Let us know if that helps.

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

I'm suddenly in need of help with my Firefox browser (6.0.2)

Hi there,
I'm suddenly in need of help with my Firefox browser (6.0.2)
(OS: I use Windows XP).
When I open up the browser, all I see is a completely blank white screen, with all the toolbars at the top.
I know that my physical connections are fine: I've tested the modem, turned the pc off and on etc. and I can also receive/send emails.
This problem started today, 8th September, 2011 and has never happened before.
Is it a coincidence that Firefox updated itself just before I logged off yesterday evening? Could it be something to do with this particular new update?
I've also noted that just before I "open up" Firefox, I now get a small box saying:
[JAVASCRIPT APPLICATION]
Exc In Ev handl: TypeError: This oRoot.enable is not a function
This has never appeared before - I hope it offers a clue a to what is wrong.
The Browser is not stuck in Safe Mode, by the way.
Obviously, I can't search for any solutions to the problem on the internet, as I can't physically see any websites!
(A friend is sending this query on my behalf from their pc)
Any light you could throw on this confusing problem would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.
If the only option is to uninstall Firefox and reinstall it from your site, then I'm also in trouble (I can't see the internet or make any downloads).
In that case, would you be able to send the .exe file as an attachment to my email address? If so, please let me know and I'll give you further details.
Many thanks in advance.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Error 1603: Need some help with this one

When installing iTunes I first get an error box saying
"Error 1406: Could not write value to key \Software\classes\.cdda\OpenWithList\iTunes.exe. Verify that you have sufficient access to that key, or contact your support personnel."
The second one (after I click on Ignore on the last box) I get it this one:
"Error: -1603 Fatal error during installation.
Consult Windows Installer Help (Msi.chm) or MSDN for more information"
Strange thing is that I do have full access to my computer (or atleast in all other cases I have had since I am the only one with an account on it).
I have done my best in trying to solve it myself but I'm running out of ideas. I have downloaded latest versions from the website and tried installing Quicktime separately. I have also tried removing Quicktime using add/or remove programs though I just I didn't dare to take full removal because it said something about system files.
Anyway I really need some help with this, anyone got any ideas?
Greets,
Sixten
Windows XP Pro

Do you know how to count backwards? Do you know how to construct a loop? Do you know what an autodecrementor is? Do you know how to use String length? Do you know Java arrays start with index 0 and run to length-1? Do you know you use length on arrays too? Do you know what System.out.println does?
Show us what you have, there isn't anything here that isn't easily done the same as it would be on paper.

I Need Some Help With My Dreamweaver

Hello, there i need some help with my dreamweaver i already made a forum about this but that one i maded didnt make sense soo i will make it more details in it soo i will tell you what i did i tell you what i downloed and all that just now but i tell you the things what it does i downloaded Adobe Design and Web Premium CS6 its a 30 day trial then and now i will tell you the details look below please
Details
Soo i opened my start menu then went on all programs then clicked on Adobe Design and Web Premium CS6 then i clicked on the dreamweaver CS6 then when i clicked on it i heard my computer shut down then it shuted down when i opened it straight away then it turns it self back on
What did i do about this when it happened?
I made a question so please can telll me what to do or what ever
Why did i download it?
i downloaded it because i am making a website and i want to use dreamweaver CS6 because i use notepad++ i do not like the notepad++ its harder and dreamweaver helps a bit i think because i watched a video of it
What if you dont have an answer?
Well, i will be very angry because i am making a good website its gonna be my frist publish website ever i made 20 websites but i never published them i deleted them because i wiped my computer
What kind of Computer Do You have?
System:
Micfosoft windows xp
Media Center Edition
Version 2002
Service Pack 2
Computer
ei-system
intel(R)
pentium(R) 4 CPU 3.20ghz
3.20 ghz, 960 MB of RAM
Btw i am using dreamweaver CS6 if you fogot and dont say add more details because there is alot off details there and if you help me i will show u the whloe code when i am done but leave ur emaill address below
(C) Connor McIntosh

No.
Service Pack 3 just updates your OS. All of your files, folders and programs will still be there.
You will start running into more problems like this the longer you stick with XP though. That particular OS is over 11 years old, service pack 3 hs been out for over 4 years.
It may be time for a system upgrade. I personally went from XP to Windows 7 and I haven't looked back one bit.

ITunes help page does not load

Greetings,
Ever since updating to iTunes 10, the help page does not load. It's blank. If I click the home menu, I can switch to another app's help page just fine, but when I switch back to iTunes, it's blank.
Also, if I enter a search term on the blank help page, it willreturn hits, but when I click on them, I again am left with a blank screen.
BTW, the gear menu is a sticky menu (one click and it stays down) but the home menu I have to hold the mouse down. Not sure if that's normal behavior, but I thought I'd throw that out there too, just in case it's helpful.
Help (with help)!

It happens the same to me. But also when click in the topic link a warning shows up telling me I need internet connection to view that help topic.
Of course I'm online and my connection works pretty well.
I tried rebuild help files with Onyx but no help.
Anyone resolved this issue?

Need major help with websites not loading...

Similar Messages

Maybe you are looking for