Need manual for an older 20" A1038 Monitor ???

Hi,
I've searched in vain for the manual for the A1038 monitor. Does anyone know where I can download it?
Thanks

http://support.apple.com/manuals and then enter the serial number.

Similar Messages

  • Need manuals for Equium L10-273

    Dose any one know were I can get a manual for my Equium l10-273 as have misplaced mine?
    Have searched this site but it gives no results.

    Hi
    Do you mean the user manual???
    This can be downloaded from the Toshiba European support homepage.
    Go simple to
    http://eu.computers.toshiba-europe.com -> Support & Download -> Toshiba User Manual
    You will need to search for the user manual for Equium L10

  • Need manual for Satellite S2610CDT/6.0

    Hello .
    I would like to find the manual for this notebook (Satellite S2610CDT/6.0) but i can't find it on the Toshiba-site.
    It is for a friend and he likes to internet with it but the notebook has no network-entrance. So I would like to find out if it is still possible.
    Anybody has some ideas?

    I have checked Toshiba support site and the manual is listed there. Please go to http://eu.computers.toshiba-europe.com > Support & Downloads > Support Homepage.
    There you can find Toshiba User Manual under Downloads.
    At this point under product type select ARCHIVE and you will find it.
    Bye and good luck!

  • Need Manual For Linksys EFAH24 Switch

    Hello,
    I have tried to download the manual from Linksys, but for some reason the PDF link is dead. Does anyone know where else I can download a manual for this unit?
    Thanks JR

    Check this link, and click on Get Manual  and then download the Manual on your Computer. I think it will help in settings up Hub.

  • Need manual for Satellite A40-702

    Hello all
    My daughter has been given a SA40 702. The problem is it's the bit worse for wear, keys missing from the keyboard, DVD drive problems. These are not insurmountable.
    The main problem is that the manual has been lost. Does anyone have a link to a down-loadable version please?
    Regard
    Martin

    Hi,
    if you need a manual then look here:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_manuals.jsp?service=EU&mode=allMachines
    On that site you can choose the machine you have (in your case Satellite -> Satellite A-series -> A40) and then download the manual as pdf.
    Greetings

  • Need manual for MSI GTX 680 Lightning

    I recently purchased a MSI GTX 680 Lightning card, but the cd that came along was faulty, I cant open the pdf manual. I have contacted the shop I purchased the card from but they cannot get another cd for me. From where can I download the manual?
    Great card btw, I just want to read more about the card details.
       /Peter

    as flobelix said vga manuals doesn't have much.
    but you can use nvidias official pages for the more information.
    http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-680

  • Need manual for TAB 2 A10-70

    This should be a good link for the users manual.https://download.lenovo.com/consumer/mobiles_pub/lenovo_tab_2_a10-70_ug_en_v1.0_201503.pdf

     The manual given on the Support site relates to a Thinkpad tablet and is dated 2012.Looking through the pages has no reflection on my model.Why is it so difficult to find info on this tablet, the manufacturing date is 2015-04-20! Have the same problem finding accessories. dwflo

  • Need Manual for mail.app

    How to search, please?
    http://support.apple.com/manuals/#Mail.app ? Check it.
    ~ k.

    Why can we update App lik  Wechat - Viber - Whatsapp.. Please BB  bring Update for Us.

  • NVidia GeForce 6800 Ultra just died - need equivalent for my G5 - HELP

    Hi,
    I reviewed the posts but didn't find a simple answer to my mundane (if critical to me!) question:
    I have a G5 as outlined below. I upgraded it the very day the 30"monitors were announced and received the:
    nVidia GeForce 6800 Ultra DDL Card kit
    My card died this morning and I need to replace it with a functional equivalent, I know the 6800 is rare which is fine- I just need whatever is available today to get fixed up.
    Does anyone know what card I can easily get to do the job?
    Thanks so much.
    My G5
    Model Name: Power Mac G5
    Model Identifier: PowerMac7,3
    Processor Name: PowerPC G5 (3.0)
    Processor Speed: 2.5 GHz
    Number Of CPUs: 2
    L2 Cache (per CPU): 512 KB

    Alot depends on whether you ever have a second monitor hooked up.
    There is a better, faster card than a 6800 for G5s called a 7800GS, but it only has 1 @ DVI port, and one VGA port. The DVI port can run a 30" just fine however. (Means it supports "Dual Link") These are all flashed PC cards....but the ROM is quite stable and they are GREAT cards.
    If you need to run 2 @ 30" DVI monitors than you will need to find a Mac 6800 on EBay. It HAS to be an original Mac one, the "flashed" PC ones NEVER have Dual Link capability.
    Another option would be a Max X800 XT...it has a DVI port good for a 30" and an ADC port which is only useful for an older Mac ADC monitor...but it can be converted to DVI with a relatively cheap adapter. These cards are super rare but occasionaly show up on Ebay. There are flashed X800s but most are VGA only...the DUal Link DVI ones are ULTRA rare.
    No Radeon 9800 ever had Dual Link, so don't waste any time looking at those.
    There is a retail option though I am not certain they are available anymore...the Radeon 9600 Mac and PC edition....has to be that one as most Mac 9600s didn't run Dual Link. These cards worked in Mac or PC and had 256 Megs of RAM. Sadly, they are MUCH slower than a 6800.
    I can't stress enough that you need to find a card with Dual Link capability to run a 30". Otherwise you will end up looking at your 30" at 1280x800 instead of 2560x1600.
    Try BruinMacs on Ebay, college kid who helped write the 7800GS ROM, now selling them for less than everyone else. He sometimes even has the X800 with Dual Link too, ask him.
    Sadly, you will find that the official Mac 6800 and X800 cards still fetch $400 or so...the old "Supply & Demand" rule being hard to avoid. If you can find one on a local Craigslist ad, grab it up !!! (after testing)

  • Is there a manual for the latest pages version?

    I can only find manuals for the older version. 
    /A

    The best I can find is at this Apple Support site. On the right hand pane, click on Pages Help.
    Same can also be done for iWork 2013 Numbers and Keynote by clicking on the app in the left pane then it's Help in the right pane.

  • Manual for GBIP-232CT.64K RS232 to GPIB converter

    I'm trying to locate a product manual for an "older" style GPIB to RS232 converter box. The part number on the box is GPIB-232CT.64K (180450-01 Rev B2).

    Hi,
    All of our old product manuals should be available online at http://www.ni.com/manuals.
    Hope this helps out!
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

  • Where do I find Manual for the 15" LCD Flat Panel display?

    Looked in Manuals here and did k-base seach...all I get is the manual for the older 15 " LCD Display with the oval stand.
    TIA
    KL

    Terence, your response is about as useful as gills on a hummingbird
    Nice phrase.
    Not heard of the App Store then? Not running 10.6.6 or later? If the answer to either question is no then you're stone out of luck. The only place to buy iPhoto 11 without the rest of iLife is on the App Store.
    Regards
    TD

  • Where can I find a new monitor for my older MacBook Pro 13.3" laptop?

    Any help for finding a place to buy a new monitor for my older Apple Pro 13.3?

    Do you need a new screen? Visit ifixit.com.
    Clinton

  • Automatic Conversion of PR to PO.. Need User Manual for ME59 T code

    Hai Sap Gurus,
    I Got the following content from net. but kindly help me by sending me user manual for ME59.
    You created purchase requisition for various material. During creation of purchase order you used the following path:
    Purchase Requisition
    .......Follow on function 
    .........Create Purchase Order
    ............automatic via purReq. 
    When you mentioned required purchase requisition number and execute, system give error that purchase requisition does not contain any suitable item. 
    Is there any setting in customization where you can monitor and use that function.
    In an effort for you to successfully use the Transaction Code ME59 to automatically convert the current PR into PO, then the following criteria should be met: 
    1) In the Purchasing View of the material master data, the "Autom. PO" field must be clicked; 
    2) In the Purchasing View of the Vendor Master Data, the "Automatic Purchase Order" field must be clicked; 
    3) The Outline Agreement or Purchasing Info Record shall be maintained which will allow the automatic copying of unit price and other conditions into PO; 
    4) The Source List shall be maintained for the nominated vendor which was shown in either the Outline Agreement or Purchasing Info Record. 
    or 
    it might be PR subject to release strategy and not yet released
    or 
    If you're not using a source list or automatic creation of PO, you may need to assign the requisition to a purchase information record using transaction ME56. Then it should appear in ME58
    Thanks.. Reply me pls...
    Edited by: Swetha SAP Girl on Jun 18, 2009 2:19 PM

    Hi,
    Step by step process for automatic  PO creation from PR
    1.  Tick check box in purchasing view of Material Master(MM01/MM02)
    2.  Tick check box for auto PO in purchaisng data of Vendor Master record (MK02)
    3.   Maintain Source list for Material,plant and Vendor combination in ME01
    4.   In ME51N create PR and assign source of supply in "Source of supply" tab
    5.   In ME59N key in Purchaisng Org., Vendor and Plant - execute
    You will get POs created with reference to PR automatically.
    Hope its clear
    Regards,
    Uzair Hussain

  • Cheap monitor for my older imac

    Just looking for a cheap monitor to use as a display for my older imac (g5 ppc) which has recently gone dark. I believe the display went bad but it's possibly a graphics card issue. Just would like to find a cheap temporary solution to be able to load up my iPads and iPhones with music and movies and basic computer functions until I can afford a new Imac or possibly MacBook. Is there anything that I need to know about compatibility issues or is it just as simple as hooking it up via the USB ports on the back of the Imac?

    I connect my MacBook Pro at work to various different external monitors, and my daughter uses a Samsung external monitor sometimes with her MacBook Air. With our laptops, the default has been that the external monitor shows up "mirrored," which is what you want, since that means the external monitor shows the same thing that is on the built in monitor. Not so good would be to come up in the extended desktop mode since that might not give you access to various menus, the dock etc. on the external display (those things would be on the built in monitor, which isn't working for you.
    I can't promise you which it will be for you, but my experience has been that mirrored is the default (which is what you need), and to get extended desktop you need to go into the Displays Preference Pane and explicitly set that up.
    If you really are going to try an external monitor, I'd get one at Best Buy or Amazon or somewhere like that who offers a no questions asked return policy in the first 14 or 30 days. So if you are stuck with your Mac in a mode that doesn't allow you to use the external monitor, you can return your purchase.
    I also have a G5 iMac, and frankly, if the monitor went out, I'd simply replace the computer. The other parts inside are probably wearing out also. The February 2013 issue of Macworld discusses the latest Mac Mini's, which cost only $599 or $799 and are extremely fast and capable machines. These are Apple's "low end," and they are really superb machines. And if you get an external monitor, you can use it also with the Mini. By the way, if you buy an external monitor, I recommend staying away from the cheap loss leader units that are often advertised and instead spend a little more to get a quality Samsung or other good brand name monitor, possibly an LED one. The quality of the screen and images and resolution do make a big difference in the use experience. I got my daughter a low-cost ACER monitor first, and she is a photographer and demands high quality images on her screen, eventually we traded it back in at Best Buy (Best Buy has a nice trade in policy where you get a credit) and replaced it with a high quality (costlier) Samsung LED monitor.
    The G5 iMac is so limited, both in its hardware and software, that I'd say if you can afford it, look at the latest Mac Mini or iMacs. Even the low-end ones are probably x10-x20 times faster and more capable than the iMac G5 and you can do all the latest things with them.

Maybe you are looking for