Need Manual For Linksys EFAH24 Switch
Hello,
I have tried to download the manual from Linksys, but for some reason the PDF link is dead. Does anyone know where else I can download a manual for this unit?
Thanks JR
Check this link, and click on Get Manual and then download the Manual on your Computer. I think it will help in settings up Hub.
Similar Messages
-
Need manuals for Equium L10-273
Dose any one know were I can get a manual for my Equium l10-273 as have misplaced mine?
Have searched this site but it gives no results.Hi
Do you mean the user manual???
This can be downloaded from the Toshiba European support homepage.
Go simple to
http://eu.computers.toshiba-europe.com -> Support & Download -> Toshiba User Manual
You will need to search for the user manual for Equium L10 -
Password recovery for linksys slm224g2 switch
what is password recovery for linksys slm224g2 switch
Hi Kalpesh.
Unfortunately this series of switches doesn't have a password recovery. Only the reset infront of the device.
If you have forgotten the device password you have to reset the switch to factory default to access the interface again. -
Need manual for Satellite S2610CDT/6.0
Hello .
I would like to find the manual for this notebook (Satellite S2610CDT/6.0) but i can't find it on the Toshiba-site.
It is for a friend and he likes to internet with it but the notebook has no network-entrance. So I would like to find out if it is still possible.
Anybody has some ideas?I have checked Toshiba support site and the manual is listed there. Please go to http://eu.computers.toshiba-europe.com > Support & Downloads > Support Homepage.
There you can find Toshiba User Manual under Downloads.
At this point under product type select ARCHIVE and you will find it.
Bye and good luck! -
Need manual for an older 20" A1038 Monitor ???
Hi,
I've searched in vain for the manual for the A1038 monitor. Does anyone know where I can download it?
Thankshttp://support.apple.com/manuals and then enter the serial number.
-
How to change SSID for Linksys wireless switch for PC?
imac-G5 Mac OS X (10.4.4)
Now, let's try to brake this issue down:
I need the Linksys to get a PC (Dell) running wireless. I installed a motorola PCI card for ethernet & the software that came with it in the PC. The switch does not read the network.
This involves a networking issue on a PC running Windows
The last time I spoke with Linksys they suggested http://192.168.1.1/same address, also 192.168.1.225. I get network connection errors.
This is an issue of your network setup
I have my Powerbook hard wired to the Motorola wireless router. My I-Mac is wireless.
So PowerBook & iMac work fine. Right?
You also have a Motorola Wireless Router, is this also your broadband modem?
I hooked up the Linksys switch to the modem with ethernet cat 5 cable. I still get connection errors. Neither computer can access these links. I get Motorola's broadband page with 192.168.1.1. I've done as much as I know but can't change the ssid if I can't access the Linksys switch. HELP Please!
This is a bit confusing:
What do you mean by connection errors? Unable to connect, able to connect but the connection drops?
Try this:
Shutdown your PC and both of your Macs
Turn of the Linksys switch and unplug it from the Motorola Router
Unplug the PowerBook which is wired to the Motorola and directly (with the same ethernet cable) connect it to the Linksys switch
Turn on the Linksys switch
Turn on your PowerBook
Open Safari or any other browser and go to: http://192.168.1.225 or http://192.168.1.225 (or whatever address Linksys told you)
Configure your Linksys switch (Change SSID) and save new settings
now, if everything goes fine, then:
Connect the PowerBook to the Motorola Router (just as it was before)
Connect the Linksys switch to the Motorola Router via an Ethernet Cable
Try to connect (from your PowerBook via Safari) to the Linksys switch@ http://192.168.1.225 or http://192.168.1.225 (or whatever address Linksys told you)
Keep the iMac and the PC shutdown untill you manage to set up the Linksys switch propperly
Post back feedback
a few Macs running 9.x, a bunch of Macs running 10.4.x and some serious SGI workstations running Irix 6.5.x
Message was edited by: fu -
Need manual for Satellite A40-702
Hello all
My daughter has been given a SA40 702. The problem is it's the bit worse for wear, keys missing from the keyboard, DVD drive problems. These are not insurmountable.
The main problem is that the manual has been lost. Does anyone have a link to a down-loadable version please?
Regard
MartinHi,
if you need a manual then look here:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_manuals.jsp?service=EU&mode=allMachines
On that site you can choose the machine you have (in your case Satellite -> Satellite A-series -> A40) and then download the manual as pdf.
Greetings -
Need manual for MSI GTX 680 Lightning
I recently purchased a MSI GTX 680 Lightning card, but the cd that came along was faulty, I cant open the pdf manual. I have contacted the shop I purchased the card from but they cannot get another cd for me. From where can I download the manual?
Great card btw, I just want to read more about the card details.
/Peteras flobelix said vga manuals doesn't have much.
but you can use nvidias official pages for the more information.
http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-680 -
This should be a good link for the users manual.https://download.lenovo.com/consumer/mobiles_pub/lenovo_tab_2_a10-70_ug_en_v1.0_201503.pdf
The manual given on the Support site relates to a Thinkpad tablet and is dated 2012.Looking through the pages has no reflection on my model.Why is it so difficult to find info on this tablet, the manufacturing date is 2015-04-20! Have the same problem finding accessories. dwflo
-
Need Manual for mail.app
How to search, please?
http://support.apple.com/manuals/#Mail.app ? Check it.
~ k.Why can we update App lik Wechat - Viber - Whatsapp.. Please BB bring Update for Us.
-
Need Help for Huawei S2700 Switch
My friend ask me to find a layer 2 Huawei switch with 48 10/100Base-TX ethernet ports and 2 dual purpose 10/100/1000 or SFP. Someone advise me switches S2710-52P-SI-AC and S2710-52P-PWR-SI, does those switch suitable?
Hello,
Host will can't get internet connection
I remove this configuration...... access-list 101 permit ip 10.25.0.0 0.0.255.255 any
and change the configuration .... ip access-list extended 101
5 permit ip host 10.25.7.136 any
In this case I will allow only host 10.25.7.136 but it isn't work.
No internet connection from the TMG Server. -
Still need a new firmware for linksys one/cisco svr3500
now i tried over a year to just find someting about this either firmware or manuals or someting.. it freezes after a little time
and this didnt help me the phone support just send me around in a circle to ppl that dosent know anything and left me only with a phone bill since im from denmark
and after all that time used for nothing and have an expensive router just collecting dust that it just not funny anymore
1. May 10, 2010 6:17 PM (in response to Chris Rasmussen)
Re: linksys svr3500
Hi HightowerDK,
Contact the BAC (Broadband Access Center) for Linksys One support if you are in the USA on 1 866 870 5826
Regards,
Cindy Toy
Cisco Small Business Support
Community ManagerHi,
Thank you for your quick reply.
My DVD drive is a SD-R6112 I found a frimware update on the page you have given searching on the model of my drive but when executing the exe file it says I don't need the update and program stopped.
On another forum someone said the third party firmware I installed should have changed some calibration data of my drive thats why I can not read any DVD-R anymore and no firmware will fix it anymore.?
I still can read CD's and original DVD's but I can not read DVD-R's anymore which is very annoying.
Do you know if Toshiba technicians could re-calibrate my drive?
Can I buy an intern DVD drive for my model? -
Ac adapter for Linksys model # EZXS88W 10/100 8-Port workgroup Switch
Please, need help finding and obtaining an AC Adapter for Linksys model3 EZXS88W 10/100 8-Port Workgroup Switch. what info do I need to narrow my search, any websites? be blessed and keep looking up!
(\O/)
/_\ ANGEL!!
Jay Paul Wilder,RN _
Be Blessed and Keep Looking Up! (\O/)
*************************************** /_\ Angel*Try to check on this link to check the power specs of the adapter.
-
Cisco switches 3560 need manual reboot after power outages
Hi everyone,
In africa we have lot of power outages.
Working at a very big company with more than 300 switches can be challenging if you have to bring them up by manually rebooting few of them on the property.
The switches are directly connect via fiber using LH/LX SFP connector to a 4500 Core switch which is on a UPS and does not go down during the outage; only the access layer switches will then need manual reboot....
Please assist in having a permanent fix on this issue.
Thank you very much in advance.@hdussa:
Here is the output :
sh boot
BOOT path-list : flash:c3560-ipbase-mz.122-35.SE5/c3560-ipbase-mz.122-35.SE5.bin
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : no
HELPER path-list :
Auto upgrade : yes
Auto upgrade path :
===================================================================================================
SW1#sh dir flash:
Directory of flash:/
2 -rwx 5436 Nov 21 2013 13:08:49 +00:00 vlan.dat
3 -rwx 4749 Oct 10 2013 09:08:45 +00:00 config.text
4 -rwx 5 Oct 10 2013 09:08:45 +00:00 private-config.text
5 drwx 512 Mar 1 1993 00:10:16 +00:00 c3560-ipbase-mz.122-35.SE5
27998208 bytes total (18636800 bytes free)
===================================================================================================
SW1#sh ver
Cisco IOS Software, C3560 Software (C3560-IPBASE-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 19-Jul-07 18:15 by nachen
Image text-base: 0x00003000, data-base: 0x01100000
ROM: Bootstrap program is C3560 boot loader
BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(35r)SE2, RELEASE SOFTWARE (fc1)
SW1 uptime is 1 week, 1 day, 8 hours, 42 minutes
System returned to ROM by power-on
System restarted at 09:58:40 UTC Mon Feb 10 2014
System image file is "flash:c3560-ipbase-mz.122-35.SE5/c3560-ipbase-mz.122-35.SE5.bin"
cisco WS-C3560-8PC (PowerPC405) processor (revision A0) with 122880K/8184K bytes of memory.
Processor board ID FOC1315V4LS
Last reset from power-on
3 Virtual Ethernet interfaces
8 FastEthernet interfaces
1 Gigabit Ethernet interface
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:25:46:DE:1F:00
Motherboard assembly number : 73-10612-07
Power supply part number : 341-0207-01
Motherboard serial number : FOC13152YLK
Power supply serial number : LIT13060H65
Model revision number : A0
Motherboard revision number : C0
Model number : WS-C3560-8PC-S
System serial number : FOC1315V4LS
Top Assembly Part Number : 800-28131-01
Top Assembly Revision Number : E0
Version ID : V01
CLEI Code Number : COM8C00ARA
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
* 1 9 WS-C3560-8PC 12.2(35)SE5 C3560-IPBASE-M
Configuration register is 0xF
SW1#
Please let me know if you need same output for another switch posing the same problem.
Thank you very much. -
Automatic Conversion of PR to PO.. Need User Manual for ME59 T code
Hai Sap Gurus,
I Got the following content from net. but kindly help me by sending me user manual for ME59.
You created purchase requisition for various material. During creation of purchase order you used the following path:
Purchase Requisition
.......Follow on function
.........Create Purchase Order
............automatic via purReq.
When you mentioned required purchase requisition number and execute, system give error that purchase requisition does not contain any suitable item.
Is there any setting in customization where you can monitor and use that function.
In an effort for you to successfully use the Transaction Code ME59 to automatically convert the current PR into PO, then the following criteria should be met:
1) In the Purchasing View of the material master data, the "Autom. PO" field must be clicked;
2) In the Purchasing View of the Vendor Master Data, the "Automatic Purchase Order" field must be clicked;
3) The Outline Agreement or Purchasing Info Record shall be maintained which will allow the automatic copying of unit price and other conditions into PO;
4) The Source List shall be maintained for the nominated vendor which was shown in either the Outline Agreement or Purchasing Info Record.
or
it might be PR subject to release strategy and not yet released
or
If you're not using a source list or automatic creation of PO, you may need to assign the requisition to a purchase information record using transaction ME56. Then it should appear in ME58
Thanks.. Reply me pls...
Edited by: Swetha SAP Girl on Jun 18, 2009 2:19 PMHi,
Step by step process for automatic PO creation from PR
1. Tick check box in purchasing view of Material Master(MM01/MM02)
2. Tick check box for auto PO in purchaisng data of Vendor Master record (MK02)
3. Maintain Source list for Material,plant and Vendor combination in ME01
4. In ME51N create PR and assign source of supply in "Source of supply" tab
5. In ME59N key in Purchaisng Org., Vendor and Plant - execute
You will get POs created with reference to PR automatically.
Hope its clear
Regards,
Uzair Hussain
Maybe you are looking for
-
How to increase the length of a message in message class
Hi Friends, Is there any way to increase the length of a message in a message class as the maximum length is 72 chars. My requirement is I cannot use the Long text option. Thank You
-
How do I save input from a user into a html file?
Sure could use a couple of pointers here, I am a newbie to jsp's. I am trying to create an html file with meta tag keywords and description for search indexing purposes, the idea is to have the user call a jsp page and enter the desired meta tags in
-
Increasing filesystem size in disksuite
I need to increase the size of a file system on a Solaris 9 server. The filesystem is apparently a metadevice, it shows in /etc/vfstab as: /dev/md/dsk/d15 /dev/md/rdsk/d15 /opt/inlum ufs 1 yes - metastat: d15: Concat/Stripe Size: 37749760 blocks (18
-
Hello, I am running into problems in Eclipse Mars when trying to run a static web project using the HTTP preview server (as well as dynamic web project running on apache, but one thing at a time), I get this error. 'Launching HTTP Preview at localhos
-
SetValueAtTime setting keyframe at wrong time
With the following code var comp = app.project.activeItem; comp.layer(1).transform.scale.setValueAtTime(1,[25,25]); comp.layer(1).transform.scale.setValueAtTime(10,[25,25]); comp.layer(1).transform.scale.setValueAtTime(100,[25,25]); I would expect a