Need manual unisntall instructions for 1.3.1_02

Hi, I downloaded and installed Java 1.3.1_02 onto my Win ME computer. Something got messed up with the install. I went to control plannel, add/remove to get rid of it and it gave me an error, some files were missing it said. Now Im stuck with it. How do I get rid of it? Thanks.

bump

Similar Messages

  • Where can I find a manual or instructions for time machine?

    Where can I get instructions for using time machine. I have 2 external hard drives, 1 for docs, music, photos and 1 for a cloned version of my system. I have ordered time capsule so I want to get up to speed on how I ca use different drives for different things?

    check out this page
    http://www.apple.com/support/leopard/timemachine/

  • Need RAM Installation Instructions for mac mini intel duo core

    I just purchased two gig of ram for my intel duo core mac mini and cannot figure out how to install. I was able to get the cover off - but where does the RAM go?
    I can't find any instructions on the apple support page for the mac mini.
    All of the links in discussion board that I found are for instructions on installing ram on single processor mac mini which uses different type of ram and is installed in diff location.
    Any help greatly appreciated.

    I found a video here at owc: http://eshop.macsales.com/tech_center/index.cfm?page=Video/mini/intel/high.html

  • Need instructions for Enhanced Cable Tech "Liberty" VGA adapter....

    Hi!
    I'm trying to get my old PowerMac 8500 up and running. The only display I have that is (well, should be...) compatible is an old Apple Studio Display 15" Flat Panel (Rev B.). This is the second iteration of that display, with the VGA connection, not the earlier Mac 15 pin D-sub connection, which is what the 8500 has (http://support.apple.com/kb/SP135).
    I have two adapters that I'd think should do the trick of getting me something on the display. An NEC MultiScan unit that has several resolutions printed on it, but no adjustments, and an Enhance Cable Technologies Liberty adapter.
    The NEC one gets me noplace, and so far, neither does the Liberty.
    The Liberty has a knob with several letter stops (A-M or N), and a set of 9 (I think) DIP switches. Instructions on the back list many resolutions, but only give instructions for the last 3 DIP switches, which are for sync. It mentions to consult the instructions (which I can't find or don't have) for using the other DIP switches to get "expanded" ID codes.
    I've tried all of the knob stops, and a couple DIP switch settings, but nothing seems to get me an image on the display. The display does work, it just isn't detecting a signal, and it will tell me so.
    I think the 8500 may be going into "headless" server mode (no video) when it can't detect a monitor attached, so once it boots (and it IS booting), I can't get anything until I re-boot again. I'll have to dig up an OS9 install CD, to see if that helps me any. When I stored it some years ago, it was running Mac OS X 10.2 via a boot loader (it has a Sonnet PPC G3 processor upgrade card), so that may be an issue, too.
    But, I was hoping that maybe someone has the instructions for the Liberty adapter kicking around in their junk drawer. All I need is the instructions for the DIP switch settings.
    Regards,
    Larry W.

    Well, bought some new PRAM batteries from OWC. Installed one on the 8500/150 (also bought spares for my G4 & SE/30), zapped the PRAM several times, and still nothing. Then dug out my DVI-VGA adapter for my MBP, just to verify that nothing had gone sour with the display since I last put it in the box. All good there.
    But, it turns out that I had a solution all along in the "Accessories Kit" in the box the Studio Display came with. There was, still sealed in 16-year-old plastic, an adapter that came bundled with the display! Cut open the plastic, installed it, hooked on the display, and presto-chango, I'm watching Jaguar boot up!
    Though, Jaguar isn't so swift on this machine, even with a 250Mhz G3 processor... Might have to do with only 240MB of RAM... Once I got it back running Mac OS 9.1, though, it's a pretty snappy machine. It even reports a processor speed of 279Mhz!
    Now I can get what I need from the machine, and move it on to a new home. Also check out all the rest of my SCSI devices for data I think I need, as this is my last SCSI machine that'll take more than one internal device!
    And I may even see if I can make the Liberty adapter work like the Apple-supplied one.

  • Using instruction for creating field catalog to archive object "MM_MATNR"

    Hi all,
    I need a using instruction for creating a new field catalog to archive object "MM_MATNR". I'd like to create a field catalog using some fields of tables mara, makt, mvke and marc.
    Thanks for your help!

    Hi,
    Go to following link;
    [Material Master Archiving|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f75a80-867f-2d10-7aa6-ac164e43e89f?quicklink=index&overridelayout=true]

  • Manual network selection for iPhone 5

    i need manual network selection for iPhone 5 why do not?

    You bought the wrong phone.
    Yes, it will work. Up to a point. LTE will not work as they use different LTE bands. Contact AT&T to make sure 3G data is provisioned properly on your account. And consider returning the phone and purchasing one intended for AT&T (or an unlocked phone) instead.

  • Need instructions for downloading/installing Flash Player

    Need instructions for downloading/installing Flash Player in my PC

    Hi, This is the Adobe Flash Player Uninstall link:
    http://kb2.adobe.com/cps/141/tn_14157.html
    This is the Adobe Troubleshooting Guide which you may want also to review. I would suggest using the Manual Installers which you can download and SAVE to your Desktop. Pay attention to any apps using Flash, you may need to Disable any Anti-Virus. Be sure to use the Administrator Account and check Settings. Be sure to Reboot after running the Uninstaller and also after Installing.
    http://kb2.adobe.com/cps/191/tn_19166.html
    eidnolb

  • I need simple instructions for setting up hosted home directory

    Folks, I am just learning how to use OS X server (10.3.9) in our office. The manuals aren't totally clear.
    We have a lot of interns that work on shared documents on several machines. I want them to be able to login into an account on the server (where the shared files will be) and work on them that way.
    I am not quite sure how to do this. The server is already set up. I set up a LDAPv3 domain (not sure why I needed to - just following the manual instructions.
    Things I don't understand:
    - why did I need to setup another domain directory (per the manual's instructions). The local one does show up on our LAN even though workgroup manager says it's not visible to the network. Everyone can see the sharepoint I've created.
    - I can't seem to do anything with the Access Control List. I can't put anyone in it.
    Please advise.
    Tangier

    the LDaPv3 is so that if someone isn't on the local subnet of the server they can access their user account. By having a specific directroy domain you can have an address that can be access from anywhere on the network.
    It is also there so you can be able to create indivudual user accounts to have the ablitly for users to login to multiple machines and have there home folder located on the server. This allows users to not be restricted to a specific machine but still have access to all their files.
    to have the hosted home directories you first need to create a location to have the home directories... then enable sharing on that location. this can be done in the workgroup manager under sharing. Make sure under the "network mounting" you enable use for home directories. Once that is created and set up you will now be able to choose that location for users home directories under "home" in the accounts section.
    I don't have much experience using the ACLs sorry... basically for a share folder i make a folder, enable sharing on it in workgroup manager, mount the folder and then drag it to the login items for that group that i want to use that folder. that way when a particular user of that group logs in the share folder will mount and they can have access to the folder with out having to login to the server.
    I hope that helps a little and didn't confuse you more... i am still new myself but i have had to set up the individual users and share folders.
    ALSO: when having users work with the shared documents... make sure they are coping the files to there local user then copy back when they are done... this will help avoid potential issues with files being opened by multiple people and chances of file corruption.
    again i hope that didn't confuse you more
    dm

  • I need instructions for using my HP Photosmart D5345

    I need instructions for operating my HP Photosmart D5345.  I lost them.

    Hi Tigger59,
    Here is a link to the online manuals for the HP Photosmart D5345:
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&jumpid=reg_r1002_usen&lc=en&product=3...
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • I followed all instructions for redeeming a coupon for movies.  Inserted digital disc as instructed and manually entered redemption code.  Nothing.

    I followed all instructions for redeeming a coupon for movies.  Inserted digital disc as instructed and manually entered redemption code.  Nothing.  Laptop camera refused to take picture.  Entered everything manually but instructions keep saying insert digital copy of the disc.  I did.  Instructions keep repeating.  I'm in movie ****.

    Hey fattymoko,
    Welcome to Apple Support Communities.
    I imagine that would be frustrating, to not be a able to redeem an iTunes Digital Copy with the Digital Copy code and disc. Did the movie come with more than one disc or has the code been used already? Try taking a look at the article linked below, it provides tips that will resolve most issues redeeming an iTunes Digital Copies.
    Redeeming an iTunes Digital Copy - Apple Support
    Having trouble with iTunes Digital Copy?
    If your Digital Copy DVD or Blu-ray is damaged, scratched, or missing its redemption code or Digital Copy disc, contact the appropriate studio for help:
    20th Century Fox
    Disney
    Lions Gate
    Paramount
    Sony Pictures
    Universal
    Warner Bros.
    If you're having trouble redeeming your Digital Copy code or downloading your iTunes Digital Copy, contact iTunes Store Support.
    Learn more
    iTunes Digital Copies aren't available in every country.
    You must use a Digital Copy code in the iTunes Store country where the packaging says it will work. For example, you'll need a U.S. iTunes Store Apple ID to use a code from a U.S. DVD, and you'll need an Australian iTunes Store Apple ID to use a code from an Australian DVD.
    Take care,
    -Jason

  • Need instructions for setting up wireless network at home, w/o base station

    I have a new iMac with Airport Extreme card and a MacBook, also with a card. I need instructions for connecting the two Macs via Airport. I do not have a base station. The Help on the Mac does not match my actual system.
    All of the manuals that I can find are for the base station.
    Please help.

    Hi W
    You don't mention if you have any kind of internet connection on either computer, so I'll assume that you don't, and this setup will simply network the two computers with no consideration of the internet.
    On either of the computers, make sure that the Airport icon is visible in the menubar, and that Airport is active - check System Preferences, Network, Airport to make sure both are the case. Now, in the menu icon, click "Create Network". You'll be prompted to name the new network, set a channel if you need to, and you can also set a password under "Show Options". Once the network has been created, your Airport icon will change to a solid grey with a computer inside it.
    You should now be able to connect to the new network on your other Mac and share services.
    Let me know if you have any problems with it.
    Matt

  • Need instructions for iphone 4

    need instructions for use of iphone 4 - where can I obtain please.
    cant be simpler

    The manual can be found at Apple - Support - Manuals
    Allan

  • How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes?  I need step by step instructions for first-time sync with ipad mini.  Thanks.

    How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes?  I need step by step instructions for first-time sync with ipad mini.  Thanks.

    If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
    First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
    Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
    That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
    http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/

  • I need detailed instructions for scanning to my iMac using my hp desk jet 2540.

    I need detailed instructions for scanning to my imac, using the HP Deskjet 2540.

    Follow the instructions in this article, http://support.apple.com/kb/ht4505
    I double checked and your scanner is supported.

  • The Examples They Show Are not for my computer I Need instructions For A Windows Computer HP TouchSmart

    The Examples They Show Are not for my computer I Need instructions For A Windows Computer HP TouchSmart

    hp
    The answers are in the details, and you have not given us enough details to help you.
    Right now I am guessing at what you seek. Are you trying to use your HP Touch Screen to do your
    Premiere Elements importing, editing, and exporting and the Touch Screen movements are not working
    to do what you want to do in Premiere Elements?
    Have you configured the HP computer Touch Screen? Using the Touch Screen, what cannot you do
    that you can do with the mouse?
    HP Support document - HP Support Center
    If I am guessing correctly here, does the mouse work instead of the Touch Screen to allow you to
    work in the program.
    I suspect that Premiere Elements does not support Touch Screen and you will end up using a mouse, but I would need to do more homework on
    that.
    This is not Adobe. Rather user to user. If you are dealing with the current version, 13, you might want to contact
    Adobe about the matter. More on that later, once you confirm the above or let me know that I have completely
    misinterpreted your question/concern.
    ATR

Maybe you are looking for