Need manual updates for 9.2 and 9.55 to do clean reinstall of acrobat 9.0 pro from cd

I just did a new nstallation of acrobat V9.0 professional from CD:
I need a link to the master incremental update for 9.2 and the master 9.55 incremental update that goes from V9.2 to V9.55
I am looking for a master baseline release.
My reinstall is on an old XPSP3 machine. When acrobat professional 9.0 goes away I will still need the incremental update from V9.0 to V9.55
I do not need to put acrobat X or acrobat XI on this machine. A new acrobat X or acrobat XI license is for a new machine.
I keep all my master and incremental updates in archival. That way i can rebuild my machine.
This is the way it is normally done.
the autoinstaller jumped me from V9.0 on CD to V9.2 and from V9.2 to V9.55.
I dont' see master releases in the table that do the same thing.
there were only 2 updates.
normally support would just send me a link out-of-band. i understand I need to send the request thru the forum
many thanks!

Most of the manual updates are not cummulative. It sounds like you did the updates from the help menu (and many of those are cummulative -- don't know why they are not available). You may be able to find the updates you used on your harddrive -- I have seen them before, but don't remember where, probably the users folder or such.

Similar Messages

Manual update for plug ins and extensions not working

I've just noticed that when I attempt to manually check for updates either in plug ins and/or extensions from the gear symbol drop down screen that I get the drop down screen, but, the check for updates function does not work. It just sits there with nothing happening. I have to close the screen to get out of that function. Anybody know anything about this?

Thanks you for your comments. I would mention that this problem just started with the update to FF 37.0.4 I tried restarting FF in safe mode with no effect on the above mentioned problem. Any other thoughts?

When to perform Manual update for a job

Hi Sap Gurus,
I am new SAP-BI Can anyone tell me exactly why do we perform Manual Update for a job and when to perform Manual Update for a job and What exactly Manual Update does

Hi Antony,
In RSMO, BI Monitor you would be seeing several jobs that has been run for the day. In some instances there could be certain jobs that has failed. These could be because of certain packages which have failed to load. In these cases the request need not be set to error and reloaded again. The manual update can be done for those packages so as to save the entire load once again.
Regards
Govind

Need to update the business place and section code for the advances

Hi,
I need to update the business place and section code for already posted advance payment requests (f-47), advance payments (f-48) and clearing documents (F-54).
I can able to update the business place and section code for only invoices those are coming from MM route in J1INPP.
guide me
sateesh

Hi ,
Please follow the below point as per note no 640231
2. Path : Transaction SM31 . Enter the table name as TRWPR and press
                                                                  Page 2
    maintain .
    a) Delete all entries linked to component ZIND if they are present.
    b) Check that, entries as specified below exist for Component IND.
       Business
       Tran.    Time     No    Component        Function Module
       DOCUMENT CLOSE    043   IND              J_1I6_UPDATE_BA
       DOCUMENT CLOSE    044   IND              J_1IEWT_UPDATE_SECCO
       DOCUMENT PREREV   810   IND              J_1I6_CIN_DOC_PREREV
       DOCUMENT CLOSE    810   IND              J_1I2_COPY_TO_LOCAL
       RABELEG ERGAENZE 810   IND              J_1IEWT_COPY_BUPLA_FBZ
       BELEG    POST     810   IND              J_1ITDS_TABLE_UPDATE
       DOCUMENT CHECK    810   IND              J_1I6_VALIDATE_GR
       DOCUMENT POST     811   IND              J_1IEWT_UPDATE_PROVISION
       BELEG    POST     811   IND              J_1IEWT_UPDATE_PROVISION
       BELEG    CLOSE    820   IND              J_1I2_COPY_TO_LOCAL
       DOCUMENT CHECK    820   IND
       J_1I6_VERIFY_GR_EIC_QUANTITY
       DOCUMENT CLOSE    820   IND              J_1I6_COPY_TO_LOCAL
       DOCUMENT CLOSE    821   IND              J_1IEWT_COPY_TO_LOCAL
       DOCUMENT POST     821   IND              J_1ITDS_TABLE_UPDATE
       BELEG    CLOSE    821   IND              J_1IEWT_COPY_TO_LOCAL.
    For the first two entries which are marked with sequence number 43
    and 44 for the Business Transaction 'DOCUMENT' and Time 'CLOSE' ,
    ensure that the sequence number is below the number for function
    module FI_DOCUMENT_CLOSE. This is to ensure that these two functions
    are processed in time for other checks in Financial Accounting.
MIRO documents also will update the Business place section code.
Reg
Madhu M

I have a 2006 imac (intel) w osx 10.4.11 and need to update for new ipod touch? software updates says up to date, but itunes requires 10.5 or higher? any solutions?

i have a 2006 imac (intel) w osx 10.4.11 and need to update for new ipod touch? software updates says up to date, but itunes requires 10.5 or higher? any solutions?

i have a 2006 imac (intel) w osx 10.4.11 < Tiger
It's not just iTunes you need to update...
You need to upgrade to Leopard v10.5.8 at the very least in order to sync, restore, and backup an iPod touch.
See iPod touch system requirements here.
Leopard is available from Amazon here.

I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

Hello Huss87bash,
This screen indicates that the device is in recovery mode, and must be restored in iTunes before it can be used again.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Once the device has been restored, you should be able to restore your device from a backup to replace all of your content and settings.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Cheers,
Allen

SONY !! We need an update for Cairo timezone !!

Hi there .
We need an update for Cairo timezone ..
Because there is no upcoming daylight saving time .
So my phone shows that Cairo is GMT+03:00
And now it should be GMT+02:00 after we cancelled the daylight saving time or as we call it "summer time"
So what should i do ?? My mobile gaves me an incorrect time !!
Please tell me how to update my phone to work with the new time in Cairo .
Im waiting for the solution ..Thanks .

I can't see a Daylight saving option on my phone, and also Cairo should be GMT +2 by default, then add 1 hour for Daylight saving.
To solve your problem, you'll need to set your time and date manually.
Meanwhile, contact Sony directly to leave this feedback:
http://www.sonymobile.com/global-en/support/contact-us/contact-info/
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos

We need new Update for Xperia 2011 only

Hi Johan,
we need new Update for Xperia 2011 only,
in This Update We need Only 3 times :
1- Battery Precentage
2- Change Network ( 3G - E - H ) Icon
3- Messid Call in Lock Screen ( Swip to se the message )
Because Today i'm see the ICS in Xperia P and there is the battery precentage ,
and the network icon for ICS not nice and very small
and the mesed call in Xperia S in the lock screen ( Swip to se the message ) at's very nice
Yoc Can send me the ditales in my Gmail : [email protected]
ok , dont forget
Bettery precentage : in the Xperia P ( 4.0.4 ICS )
Lock Screen : Xperia S ( 2.3.7 GB And 4.0.4 ICS )

Thank you for your feedback. It will be forwarded.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Business use Linux, then Linux needs a update for ...

We needs a update for the same version windows and mac!!
the skype 4.1 for linux is a garbage, very bad!!
I was a pay user but i cancel my account because it, in business we needs a good softwere!

I used Adambonello's fix and it worked?http://forums.creative.com/creativel...mp=true#M80097

I need iOS 5 for "Drive Google" and " i Cloud" where and how do I get to download it?

I need iOS 5 for "Drive Google" and " i Cloud" where and how do I get to download it?

You have to update by using a computer via the latest version of iTunes. You can connect the iPad to your computer and launch iTunes. Select the iPad on the left side under the devices heading. Click on the Summary Tab on the right. Click on Check for Update.
After you update to iOS 5 or later, you will have Software Update in you settings and can update via WiFi OTA. If you have the iPad 2 - you will be updating to iOS 6.0.1.
If you have the original iPad - iOS 5.1.1 is as high as you can go.
How to update to iOS 5 or later.
http://support.apple.com/kb/HT4972

When downloading updates for Quicktime 7 and Itunes 10 I keep getting an error saying that files shared by these updates has an invalid signature and that the downloaded has been removed.

When downloading updated for Quicktime 7 and Itunes 10 I keep getting an error saying that files shared by these updates has an invalid signature and that the downloaded has been removed. If I don't get that message I get a message saying that the download was unsuccesful and that in order to download I need to go to tools and then select dowload only. Please help I really want to update my iphone!

Thanks for helping out, but I already tried these steps.
I even tried this on a iMac with similar results. The only difference was that the errorcode was called 2001 instead of 21.
Today I took the phone to www.iphoneambulancen.dk. A guy (in Aarhus, Denmark) that specializes in iPhone repairs. I figured, that given his occupation he'd seen most errorcdes. Two hours later, he called me back, and told me that he had replaced the battery.
So, it turns out that a broken battery can cause this behaviour.
But thanks again

Guide me for any way to avoid manual update for processing data package

Hi sap gurus,
I am new to SAP BI. In my project everyday I have to manually update for processing data packets for an infocube. Can you tell me why it happens that some time data get stuck and we have to do manual update? Is there any possible solution to avoid or correct that? Can we make some kind of Process chains that automatically do these things?
Please reply..as it is very irritating to do same thing everyday..
-Thanks in advance.

We have program RSARFCEX, which can execute all of them in one go.
But you can not schedule it in process chain, as you will never know when TRFC will struck. So it will execute without anything if there is no TRFC struck.
Pravender

HT201359 I need to update my compte skype and facebook in the apple store but they require me to get the ios5 but I don't no how to get that option

I need to update my compte Facebook and skype in the apple store since yesterday but it din't working they require me to get the ios5 but I don't know how to get to get the ios5

If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623

I downloaded the latest update for my ipad and now it won't open. the screen shows the itunes icon and a pic of the usb cable

I downloaded the latest update for my ipad and now it won't open. the screen shows the itunes icon and a pic of the usb cable

That message means that you have to restore the iOS software because something went wrong. Follow the instructions here. I hope that you have a backup.
iTunes: Restoring iOS software - Support - Apple

I am trying to download adobe reader for my macbook air but it keeps stopping at 44%. I have downloaded the latest updates for my mac and retried numerous times. Please advise. Thank you

I am trying to download adobe reader for my macbook air but it keeps stopping at 44%. I have downloaded the latest updates for my mac and retried numerous times. Please advise. Thank you

As posted about a dozen times every day, try the offline installer from http://get.adobe.com/reader/enterprise/

Need manual updates for 9.2 and 9.55 to do clean reinstall of acrobat 9.0 pro from cd

Similar Messages

Maybe you are looking for