Need media help
My phone keeps telling me to format my media card. The first time I formatted it I lost every that was saved on it (that is supposed to happen). However, I got another message that the media card needs to be formatted. I have done the following about 6 times: go to media, hit menu, hit format card. The phone locks up and I have to take the battery out and reinsert. Then, I get the message that I need to format media card. I have not lost media saved to the card these last 6 times. I can still save pics and graphics to it. However, when I try to record a video I am told the media card is insert but not formatted. Important: this media card was working perfectly for a few weeks. How do I format my media card without the phone freezing up? If you have any ideas please reply. Thanks in advance.
Might sound like a stupid question, but how are you formating the card?
If someone helped you give them kudos. Research all info!
Similar Messages
-
"needs media recovery" after a successful recovery ???
RMAN novice here....
Oracle 9.2.0.1.0 on Redhat Linux (Itanium)
Running in NOarchivelog mode
In RMAN, I backed up a set of datafiles in read only mode taking this approach....
sql "alter tablespace foo read only";
configure channel 1 device type disk format 'backupdisk/mybackuparea/foo.dbf.bck';
backup datafile 'dbdisk/mydb/foo.dbf';
sql "alter tablespace foo read write;
Everything seemed to go fine.
After some time, I wanted to restore/recover. This is what I did (again, in RMAN"...
sql "alter fablespace foo offline";
restore datafile 'dbdisk/mydb/foo.dbf';
recover datafile 'dbdisk/mydb/foo.dbf' noredo;
sql "alter tablespace foo online";
My first stab at it, without the "noredo" failed. But with the "noredo" I got
"Starting recover at ...."
A set of channel assignment statements
"Finished recover at ..."
Looks to have run OK.
But then, when I try to put the tablesopace back online...
"failure of sql command on default channel at...."
"failure during parse/execution of SQL statement: alter tablespace foo online"
"file 1 needs media recovery"
"data file 1: 'dbdisk/mydb/foo.dbf'"
What gives?
Thanks for any helpI've read the books and googled this to death.
Looks like I'm screwed.
At this point, I don't even care about the datafile or the tablespace it contained. I just want my database back.
I dropped the tablespace and it's datafile (and it's data too). I'll have to repopulate from scratch.
Lesson learned
This is what I want to do.....
I want to do a 1x/wk backup of a schema (not the whole DB, I don't have enough disk space for that, just 1 of the schemas). I've designed the thing such that each schema has it;s own tablespaces (no overlap) and each tablespace maps to a single datafile.
I would have liked to do some sort of online backup of the schema (read/write while backup is happening), but I'll settle for read only. If Oracle can't hack that, then I'll take the tablespaces offline.
The schema contains hundreds of millions of records, and the load preocess involves several times that number of data manipulation statements (deletes, updates, inserts). I'd rather not use archivelog mode because I don't have the disk space for it. And, given the volume and nature of the data I'm loading (hundreds of millions of records, created from the data in large raw data files), and how it's being loaded (precompiled C/SQL programs), I would never have need to "rerun" the enormous archives for any reason.
So...
1) backup a single schema (an exclusive set of tablespaces/datafiles)
2) as "online" as possible
3) in noarchivelog mode.
The only thing that I've seen that can do this is EXPORT/IMPORT. I tried that, but extrapolating IMPORT performance, even with all the streamlining recommendations, would take over 3 days. For this reason, IMPORT is not a viable option.
-dave -
Need some help after inserting CMS system
Hi on my site ive inserted an CMS system from Cushy. It all work that isnt the problem. The problem is that my page is a mess now.. The only thing ive addes is a cms code so im hoping the solution isnt hard to do.
There are three pages that are complete changed.
The home page
http://www.vakantiewoningeninsuriname.nl/index.html
The text colomn right under is moved.How can i place this back?
on http://www.dorff.nl/ you can see how it was before i add the CMS.
The next page is:
http://www.vakantiewoningeninsuriname.nl/bezienswaardighedenparamaribo.html
You can see there is a lot extra space between the head and the text. And you see that the text is not only at the right side anymmore.
This is how it should be:
http://www.dorff.nl/bezienswaardighedenparamaribo.html
The same goes for this page:
http://www.vakantiewoningeninsuriname.nl/prijzen.html
And this is how it have to be:
http://www.dorff.nl/prijzen.html
Hope you can help, thank you for looking..
Regards BrianDear Nancy,
Thank you for your response,
I will try to explain again what is wrong. On my site you see this page:
http://www.vakantiewoningeninsuriname.nl/prijzen.html
Problem is that the picture below is on the right side of the page instead of the left like the other pictures.
On:
http://www.dorff.nl/prijzen.html
You can see how it should looks.. Pictures to the left and text on the right. Dont know what happened when im adding the Cuschy CMS. Hope you can see what is wrong.
Regards Brian
Date: Wed, 2 May 2012 13:04:14 -0600
From: [email protected]
To: [email protected]
Subject: Need some help after inserting CMS system
Re: Need some help after inserting CMS system
created by Nancy O. in Dreamweaver - View the full discussion
Change this:
Prijzen
Bij ons kunt u terecht met elk budget. Wij hebben woningen voor mensen die een langere tijd blijven maar ook voor vakantiegangers. Daarom hebben wij verschillende prijzen gehanteerd.
to this: <!Begin CushyCMS>
h2. Prijzen
Bij ons kunt u terecht met elk budget. Wij hebben woningen voor mensen die een langere tijd blijven maar ook voor vakantiegangers. Daarom hebben wij verschillende prijzen gehanteerd.
<!end CushyCMS> Nancy O.Alt-Web Design & PublishingWeb | Graphics | Print | Media Specialists http://alt-web.com/http://twitter.com/altweb http://alt-web.blogspot.com/
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4374962#4374962
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4374962#4374962. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
question : I need some help to upload a new ebook; tanks jean-pierre marson
It may help others to advise you ..IF you give more information.
Is your eBook made in iBA and do you have a free books or paid books account?
I am not familiar with Textbooks - which I understand are apps rather ebooks, if so it seems you are trying to submit the wrong media as Tom already advised. -
Error in internet recovery need some Help.
Hello i need some help with this kind of error on my Macbook pro upon recovering in the internet using wifi..
[URL=http://s617.photobucket.com/user/jrockers_143/media/IMG_0101_zps679fa98a.jpg.htm l][IMG]http://i617.photobucket.com/albums/tt254/jrockers_143/IMG_0101_zps679fa98a.jpg[/IMG][/URL]
does anybody knows how to solve this..Never mind, after a lot of searching adn BS, finally found a tutorial on Youtube on how to get apps without a credit card.
Apple, make your system easier for people out of their country, and people without a credit card. -
I tried to update to IPad 5.1, but when it finished and tried to restore the backup, it shows me that Itunes could not back up because a session could not be started with iPad. need your help please
This has happened to me a couple of times and what I do is quit iTunes and restart my Mac and then try again and then it will work.
If iTunes has already created the backup, you should still be able to restore from the backup when you are connected to iTunes. Right click on the iPad name on the left side of iTunes and select restore from backup. After the process completes, sync with iTunes to transfer all of your apps, music, photos and other media back onto the iPad. -
I need your help regarding Macbook Pro with FCS3 via USB
Sorry for the double posting, I need your help...
I am producing an independent TV movie. We are shooting in HDV with a Sony Z5.
Currently I am using a 2007 iMac (1gb) for the FCS3. I am considering buying a Macbook Pro 15' i7, because I need the portability as well as a WD 1TB portable external drive.
Just when I am about to buy the machine I started to read all about the USB vs. the Firewire. What should I do? The MBP only have one firewire port...if I use an USB portable external drive means that I won't be able to use FCS3 properly and that buying a MBP will mean spending money in something that I won't be able to make it work properly??
Thanks for your help!!!!Hi there,
As Patrick said its Firewire hubs you should avoid along with directly connecting your media drive via USB. USB hubs are fine for connecting peripherals (keyboards, tablets, mice etc). directly connecting USB media drives is not for streaming video due to their method of sending data in packets rather than as the continuous stream that firewire provides. Firewire hubs just seem to cause all sorts of headaches to those that have used them, I cant give you a specific reason other than splitting the available FW bandwidth (someone with more knowledge on this will have to chime in), its more just inherited practice.
cheers
ANdy -
I am currently using an ipod touch 3. When i record in voice memos with the apple earphones(with an inbuilt mic) i can see on the screen that its recording;
but when i hear it, its just a long beep. Need some help!Does the mic work for other apps like Voice Control?
Does the mic work OK in other devices?
Have you tried it with another mic?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I Need Some Help With My Dreamweaver
Hello, there i need some help with my dreamweaver i already made a forum about this but that one i maded didnt make sense soo i will make it more details in it soo i will tell you what i did i tell you what i downloed and all that just now but i tell you the things what it does i downloaded Adobe Design and Web Premium CS6 its a 30 day trial then and now i will tell you the details look below please
Details
Soo i opened my start menu then went on all programs then clicked on Adobe Design and Web Premium CS6 then i clicked on the dreamweaver CS6 then when i clicked on it i heard my computer shut down then it shuted down when i opened it straight away then it turns it self back on
What did i do about this when it happened?
I made a question so please can telll me what to do or what ever
Why did i download it?
i downloaded it because i am making a website and i want to use dreamweaver CS6 because i use notepad++ i do not like the notepad++ its harder and dreamweaver helps a bit i think because i watched a video of it
What if you dont have an answer?
Well, i will be very angry because i am making a good website its gonna be my frist publish website ever i made 20 websites but i never published them i deleted them because i wiped my computer
What kind of Computer Do You have?
System:
Micfosoft windows xp
Media Center Edition
Version 2002
Service Pack 2
Computer
ei-system
intel(R)
pentium(R) 4 CPU 3.20ghz
3.20 ghz, 960 MB of RAM
Btw i am using dreamweaver CS6 if you fogot and dont say add more details because there is alot off details there and if you help me i will show u the whloe code when i am done but leave ur emaill address below
(C) Connor McIntoshNo.
Service Pack 3 just updates your OS. All of your files, folders and programs will still be there.
You will start running into more problems like this the longer you stick with XP though. That particular OS is over 11 years old, service pack 3 hs been out for over 4 years.
It may be time for a system upgrade. I personally went from XP to Windows 7 and I haven't looked back one bit. -
In need of help to remove hard drive from my naffed pc & install it into my current system
hello all.
yesturday i was given some pretty good advice regarding problems with my pc . now however i need further help as i need to know how to remove the hard drive from my naffed system and install it onto my fugitsu scaleo 600. any help is greatly appreciated
thankyouRe: HP MEDIA CENTER PC M700 ( M7630.UK ) WINDOWS XP 32 BIT[ Edited ]
11-15-2011 09:44 AM - last edited on 11-15-2011 09:59 AM
Hi:
If you are referring to the picture, you need to open the case to remove that jumper.
If you are referring to how to actually access the BIOS software menu, you do that by tapping the F10 key at the HP welcome screen.
When opening the case of your PC, please make sure you disconnect the A/C power cord.
If you are unfamiliar with opening the case I have posted the link to the service manual below.
http://h10032.www1.hp.com/ctg/Manual/c00681228.pdf
Your work is not lost. It may be held captive by a broken PC, but you can get it off your hard drive by putting the hard drive currently in your PC into another one as a secondary drive, and copying the data off of it. -
Basic Output program need some help...Please
import java.io.*;
class FileOutputDemo
public static void main(String args[])
int one=1, two=2, three=3;
FileOutputStream out; // declare a file output object
PrintStream p; // declare a print stream object
try
// Create a new file output stream
// connected to "myfile.html"
out = new FileOutputStream("myfile.html");
// Connect print stream to the output stream
p = new PrintStream( out );
p.printf ("This is written to a file %d", one);
p.close();
catch (Exception e)
System.err.println ("Error writing to file");
}Hello I am new to java, and I hope someone help me to modify the above code in order to make it work as the following:
I have a list of integer values like 1, 2, 3, 4? 10
And I want the program to substitute the integer values (the integer declared list) subsequently one by one to output a new html file as the following output:
This is written to a file 1
This is written to a file 2
This is written to a file3 ?etc
Also this substitution has to be outputted to a new file every time.
Thank you very much in advance for your kind help
if i have to post this anywhere else please advise me..
Adamimport java.io.*;
public class FileOutputDemo
public static void main(String[] args) {
FileOutputStream out; // declare a file output object
PrintStream p; // declare a print stream object
try
// Create a new file output stream
// connected to "myfile.html"
out = new FileOutputStream("myfile.html");
p = new PrintStream( out );
int[] arrayOfInts = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };
for (int element : arrayOfInts)
p.printf (element + " ");
p.close();
// Connect print stream to the output stream
catch (Exception e)
System.err.println ("Error writing to file");
}ok .... guys i really understand what do you mean,
i only need your help to make the program print one integer at a time from the array to a seprate file ....what do you suggest ... any hints
Thanks -
Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now. -
Need your help in Remodeling concept
Hi Gurus need your help in time estimations
I have a cube with data and now I need to add 10 new info objects to the cube which are including Date fields (BUDAT, BLDAT) these 10 fields will be populated to the cube from a Z table in ECC as we donu2019t have these fields in the cube we have to go for remodeling of the cube
My client requires how much time it will take to complete this
Now I want to know how much time it would take to do this (if any customer exits and user exits are required) and addition if new fields will have any effect on the current queries
Please advice in this
Thank youThe time taken will depends on a lots of factor like server speed, available memory, background jobs etc. Apart from this, the time will also depends on how much the cube is filled i.e. the no. of records in the cube. Its very abstract to tell you the exact time taken for this. But, please make sure that you have the backup of the cube which you are going to re-model. T0 say, I think 3-4 hours should be ok for the remodelling.
Thanks.
Shambhu -
Need your help on performance issue please
Hello everyone!
I need your help to understand an effect I notice with a Thread class I built. I currently work on enhancement of my application Playlist Editor (see http://www.lightdev.com/page74.htm) and a new release will be available soon.
Among other extensions the new release will have a title filter function which is based on audio data that is recursively read from ID3 tags of files found in a given root directory. The data collection is done by a CollectionThread class which reads into a data model class AudioDataModel and the entire process works fine, no problem with that.
However, when my application is started for the first time the CollectionThread runs approximately 3 minutes to collect data from approximately 4300 audio files on an Intel Pentium M 1,4 GHz, 512 MB RAM, Windows XP SP2. When the application is shut down and started again, it takes only a few seconds to do the same task for all subsequent launches.
I already tried to start the application with java option -Xms40m to increase initial heap size. This increases performance in general but the effect is still the same, i.e. first run lasts significantly longer than subsequent runs.
I also tried to build a pool mechanism which creates many empty objects in the data model and then releases them to contain the actual data at is being read in but this did not lead to better performance.
It must have to do with how Java (or Windows?) allocates and caches memory. I wonder whether there is a way to pre-allocate memory or if there are any other ideas to improve performance so that the process always only takes seconds instead of minutes?
I attach the key classes to this message. Any help or ideas is much appreciated!
Thanks a lot a best regards
Ulrich
PS: You can use the news subscription service at
http://www.lightdev.com/dynTemplate.php4?id=80&dynPage=subscribe.php4 to be informed when the new release of Playlist Editor is available.
All classes posted here do not need debugging, they already have proven to run error free. The classes are only posted for information for the interested reader - no need to go through all the stuff in detail - only if it interests you.
My application calls class CollectionThread wich is a subclass of InfoThread. CollectionThread recursively goes through a directory and file structure and stores found ID3 tag information in instances of class ID3v11Tag which in turn gets stored in one instance of class AudioDataModel. All classes are shown below.
This is the mentioned CollectionThread
* Light Development Playlist Editor
* Copyright (C) 2004 Ulrich Hilger
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
package com.lightdev.app.playlisteditor.data;
import com.lightdev.lib.util.InfoThread;
import java.io.File;
* A class to collect audio data from a given storage location.
* <p>
* <code>CollectionThread</code> uses ID3 tag information to gain data.
* </p>
* <p>See <a href="http://www.id3.org">http://www.id3.org</a> for details about
* ID3 tags.</p>
* @author Ulrich Hilger
* @author Light Development
* @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
* @author <a href="mailto:[email protected]">[email protected]</a>
* @author published under the terms and conditions of the
* GNU General Public License,
* for details see file gpl.txt in the distribution
* package of this software as well as any licensing notes
* inside this documentation
* @version 1, October 13, 2004
public class CollectionThread extends InfoThread {
* constructor
* @param model AudioDataModel the data model to collect data to
public CollectionThread(AudioDataModel model) {
this.model = model;
* constructor, creates a new empty AudioDataModel
public CollectionThread() {
this(new AudioDataModel());
* set the data model to collect data to
* @param model AudioDataModel the model to collect data to
public void setModel(AudioDataModel model) {
this.model = model;
* get the data model associated to this thread
* @return AudioDataModel the data model
public AudioDataModel getModel() {
return model;
* set the directory to collect data from
* @param rootDir File the directory to collect data from
public void setRootDirectory(File rootDir) {
this.rootDir = rootDir;
* do te actual work of this thread, i.e. iterate through a given directory
* structure and collect audio data
* @return boolean true, if work is left
protected boolean work() {
boolean workIsLeft = true;
maxValue = -1;
filesProcessed = 0;
if(getStatus() < STATUS_HALT_PENDING) {
countElements(rootDir.listFiles());
if(getStatus() < STATUS_HALT_PENDING) {
workIsLeft = collect(rootDir.listFiles());
return workIsLeft;
* count the elements in a given file array including its subdirectories
* @param files File[]
private void countElements(File[] files) {
int i = 0;
while (i < files.length && getStatus() < STATUS_HALT_PENDING) {
File file = files;
if (file.isDirectory()) {
countElements(file.listFiles());
i++;
maxValue++;
* recursively read data into model
* @param files File[] the file array representing the content of a given directory
private boolean collect(File[] files) {
int i = 0;
while(i < files.length && getStatus() < STATUS_HALT_PENDING) {
File file = files[i];
if(file.isDirectory()) {
collect(file.listFiles());
else if(file.getName().toLowerCase().endsWith("mp3")) {
try {
model.addTrack(file);
catch(Exception e) {
fireThreadException(e);
i++;
filesProcessed++;
fireThreadProgress(filesProcessed);
return (i<files.length);
/** the directory to collect data from */
private File rootDir;
/** the data model to collect data to */
private AudioDataModel model;
/** the number of files this thread processed so far while it is running */
private long filesProcessed = 0;
This is class InfoThread
* Light Development Java Library
* Copyright (C) 2003, 2004 Ulrich Hilger
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
package com.lightdev.lib.util;
import java.util.Vector;
import java.util.Enumeration;
* Abstract class <code>InfoThread</class> implements a status and listener concept.
* An <code>InfoThread</code> object actively informs all objects registered as listeners about
* status changes, progress and possible exceptions. This way the status of a running
* thread does not require a polling mechanism to be monitored.
* <p>
* <code>InfoThread</code> implements the following working scheme
* </p>
* @author Ulrich Hilger
* @author Light Development
* @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
* @author <a href="mailto:[email protected]">[email protected]</a>
* @author published under the terms and conditions of the
* GNU General Public License,
* for details see file gpl.txt in the distribution
* package of this software
* @version Version 1, October 13, 2004
public abstract class InfoThread extends Thread {
* construct an <code>InfoThread</code> object
* <p>This class is meant to be used when a <code>Thread</code> object is needed that actively
* informs other objects about its status</code>. It is a good idea therefore to register
* one or more listeners with instances of this class before doing anything
* else.</p>
* @see addInfoThreadListener
public InfoThread() {
* set the amount of time this thread shall idle after it is through with one
* work cycle and before a next work cycle is started. This influences the time
* other threads have for their work.
* @param millis long the number of milliseconds to idle after one work cycle
public void setIdleMillis(long millis) {
idleMillis = millis;
* Causes this thread to begin execution; the Java Virtual Machine calls the <code>run</code>
* method of this thread. Calls method <code>prepareThread</code> before calling
* <code>run</code>.
* @see run
* @see prepareThread
public synchronized void start() {
setStatus(STATUS_INITIALIZING);
prepareThread();
setStatus(STATUS_READY);
super.start();
* call method <code>start</code> instead of this method.
* calling this method directly will lead to an exception
* @see start
public void run() {
//System.out.println("InfoThread.run");
if (status == STATUS_READY) {
boolean workIsLeft = true;
setStatus(STATUS_RUNNING);
while (status < STATUS_STOP_PENDING && workIsLeft) {
if (status < STATUS_HALT_PENDING) {
workIsLeft = work();
if(!workIsLeft) {
setStatus(STATUS_WORK_COMPLETE);
if (status == STATUS_HALT_PENDING) {
setStatus(STATUS_HALTED);
else if (status == STATUS_STOP_PENDING) {
setStatus(STATUS_STOPPED);
else {
try {
sleep(idleMillis);
catch (InterruptedException e) {
fireThreadException(e);
else {
// error: Thread is not ready to run
setStatus(STATUS_THREAD_FINISHED);
* stop this thread. This will terminate the thread irrevokably. Use method
* <code>haltThread</code> to pause a thread with the possiblity to resume work later.
* @see haltThread
public void stopThread() {
switch (status) {
case STATUS_RUNNING:
setStatus(STATUS_STOP_PENDING);
break;
case STATUS_HALT_PENDING:
// exception: the thread already is about to halt
break;
case STATUS_STOP_PENDING:
// exception: the thread already is about to stop
break;
default:
// exception: a thread can not be stopped, when it is not running
break;
* halt this thread, i.e. pause working allowing to resume later
* @see resumeThread
public void haltThread() {
switch (status) {
case STATUS_RUNNING:
setStatus(STATUS_STOP_PENDING);
break;
case STATUS_HALT_PENDING:
// exception: the thread already is about to halt
break;
case STATUS_STOP_PENDING:
// exception: the thread already is about to stop
break;
default:
// exception: a thread can not be halted, when it is not running
break;
* resume this thread, i.e. resume previously halted work
* @see haltThread
public void resumeThread() {
if(status == STATUS_HALTED || status == STATUS_HALT_PENDING) {
setStatus(STATUS_RUNNING);
else {
// exception: only halted threads or threads that are about to halt can be resumed
* this is the method to prepare a thread to run. It is not implemented in this abstract
* class. Subclasses of <code>InfoThread</code> can implement this method to do anything
* that might be required to put their thread into STATUS_READY. This method is called
* automatically by method <code>start</code>. When implementing this method, it should
* call method <code>fireThreadException</code> accordingly.
* @see start
* @see fireThreadException
protected void prepareThread() {
// does nothing in this abstract class but might be needed in subclasses
* this is the main activity method of this object. It is not implemented in this abstract
* class. Subclasses of <code>InfoThread</code> must implement this method to do something
* meaningful. When implementing this method, it should call methods
* <code>fireThreadProgress</code> and <code>fireThreadException</code> accordingly.
* @return boolean true, if work is left, false if not
* @see fireThreadProgress
* @see fireTreadException
protected abstract boolean work();
* add an <code>InfoTreadListener</code> to this instance of <code>InfoThread</code>
* @param l InfoThreadListener the listener to add
* @see removeInfoThreadListener
public void addInfoThreadListener(InfoThreadListener l) {
listeners.add(l);
* remove an <code>InfoTreadListener</code> from this instance of <code>InfoThread</code>
* @param l InfoThreadListener the listener to remove
public void removeInfoThreadListener(InfoThreadListener l) {
listeners.remove(l);
* notify all <code>InfoThreadListener</code>s of a status change
* @param fromStatus int the status tis thread had before the change
* @param toStatus int the status this thread has now
protected void fireThreadStatusChanged(int fromStatus, int toStatus) {
Enumeration e = listeners.elements();
while(e.hasMoreElements()) {
Object l = e.nextElement();
if(l instanceof InfoThreadListener) {
((InfoThreadListener) l).threadStatusChanged(this, fromStatus, toStatus);
* notify all <code>InfoThreadListener</code>s of an exception in this thread
* @param ex Exception the exception that occurred
protected void fireThreadException(Exception ex) {
Enumeration e = listeners.elements();
while(e.hasMoreElements()) {
Object l = e.nextElement();
if(l instanceof InfoThreadListener) {
((InfoThreadListener) l).threadException(this, ex);
* notify all <code>InfoThreadListener</code>s of the progress of this thread
* @param progressValue long a value indicating the current thread progress
protected void fireThreadProgress(long progressValue) {
Enumeration e = listeners.elements();
while(e.hasMoreElements()) {
Object l = e.nextElement();
if(l instanceof InfoThreadListener) {
((InfoThreadListener) l).threadProgress(this, progressValue, maxValue);
* set the status of this thread and notify all listeners
* @param newStatus int the status this thread is to be changed to
private void setStatus(int newStatus) {
//System.out.println("InfoThread.setStatus oldStatus=" + status + ", newStatus=" + newStatus);
int fromStatus = status;
status = newStatus;
fireThreadStatusChanged(fromStatus, newStatus);
* get the current status of this thread
* @return int the status
public int getStatus() {
return status;
* cleanup before actual destruction.
public void destroy() {
//System.out.println("InfoThread.destroy");
cleanup();
super.destroy();
* cleanup all references this thread maintains
private void cleanup() {
//System.out.println("InfoThread.cleanup");
listeners.removeAllElements();
listeners = null;
/* ----------------------- class fields start ------------------------ */
/** storage for the objects this thread notifies about status changes and progress */
private Vector listeners = new Vector();
/** indicator for the status of this thread */
private int status = STATUS_NONE;
/** maximum value for threadProgress */
protected long maxValue = -1;
/** the idle time inside one work cycle in milliseconds */
protected long idleMillis = 1;
/* ----------------------- class fields end -------------------------- */
/* ----------------------- constants start --------------------------- */
/** constant value indicating that no status has been set so far */
public static final int STATUS_NONE = 0;
/** constant value indicating that the thread is currently initializing */
public static final int STATUS_INITIALIZING = 1;
/** constant value indicating that the thread is ready to run */
public static final int STATUS_READY = 2;
/** constant value indicating that the thread is running */
public static final int STATUS_RUNNING = 3;
/** constant value indicating that the thread is about to halt */
public static final int STATUS_HALT_PENDING = 4;
/** constant value indicating that the thread is halted */
public static final int STATUS_HALTED = 5;
/** constant value indicating that the work of this thread is complete */
public static final int STATUS_WORK_COMPLETE = 6;
/** constant value indicating that the thread is about to stop */
public static final int STATUS_STOP_PENDING = 7;
/** constant value indicating that the thread is stopped */
public static final int STATUS_STOPPED = 8;
/** constant value indicating that the thread is finished */
public static final int STATUS_THREAD_FINISHED = 9;
/* ----------------------- constants end --------------------------- */
}this is the InfoThreadListener interface
* Light Development Java Library
* Copyright (C) 2003, 2004 Ulrich Hilger
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
package com.lightdev.lib.util;
* An interface classes interested to receive events from objects
* of class <code>InfoThread</code> need to implement.
* @author Ulrich Hilger
* @author Light Development
* @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
* @author <a href="mailto:[email protected]">[email protected]</a>
* @author published under the terms and conditions of the
* GNU General Public License,
* for details see file gpl.txt in the distribution
* package of this software
* @version Version 1, October 13, 2004
public interface InfoThreadListener {
* method to receive a status change notification from a thread
* @param thread InfoThread the thread which status changed
* @param fromStatus int the status which the thread had before the change
* @param toStatus int the status which the thread has now
public void threadStatusChanged(InfoThread thread, int fromStatus, int toStatus);
* method to receive a notification about the progress of a thread
* @param thread InfoThread the thread which notified about its progress
* @param progressValue long the value (e.g. 10 if 100 percent completed, 20 of 1 million files processed, etc.)
public void threadProgress(InfoThread thread, long progressValue, long maxValue);
* method to receive a notifiaction about the fact that an exception occurred in a thread
* @param thread InfoThread the thread for which an exception occurred
* @param e Exception the exception that occurred
public void threadException(InfoThread thread, Exception e);
}This is class AudioFileDescriptor
* Light Development Java Library
* Copyright (C) 2004 Ulrich Hilger
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
package com.lightdev.lib.audio;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.RandomAccessFile;
import java.io.Serializable;
import java.text.DecimalFormat;
* This class models characteristics of an audio file such as the absolute path
* of the file, its tag contents (if any) and the play duration, etc.
* <p>See <a href="http://www.id3.org">http://www.id3.org</a> for details about
* ID3 tags.</p>
* @author Ulrich Hilger
* @author Light Development
* @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
* @author <a href="mailto:[email protected]">[email protected]</a>
* @author published under the terms and conditions of the
* GNU General Public License,
* for details see file gpl.txt in the distribution
* package of this software
* @version Version 1, October 13, 2004
public class AudioFileDescriptor implements Serializable, Comparable {
public AudioFileDescriptor(String absolutePath) throws FileNotFoundException, IOException {
load(absolutePath);
public boolean equals(Object o) {
if(o != null && o instanceof AudioFileDescriptor) {
return ((AudioFileDescriptor) o).getAbsolutePath().equalsIgnoreCase(this.getAbsolutePath());
else {
return false;
public void load(String absolutePath) throws FileNotFoundException, IOException {
this.absolutePath = absolutePath;
RandomAccessFile rf = new RandomAccessFile(absolutePath, "r");
if(id3v11Tag == null) {
id3v11Tag = new ID3v11Tag(rf, false);
else {
id3v11Tag.readTag(rf, rf.length() - 128);
rf.close();
public String getAbsolutePath() {
return absolutePath;
public ID3v11Tag getID3v11Tag() {
return id3v11Tag;
public void setID3v11Tag(ID3v11Tag tag) {
this.id3v11Tag = tag;
public String toString() {
DecimalFormat df = new DecimalFormat("00");
return id3v11Tag.getArtist() + ", " + id3v11Tag.getAlbum() + " - " +
df.format(id3v11Tag.getTrackNumber()) + " " + id3v11Tag.getTitle();
* Compares this object with the specified object for order.
* @param o the Object to be compared.
* @return a negative integer, zero, or a positive integer as this object is less than, equal to,
* or greater than the specified object.
* @todo Implement this java.lang.Comparable method
public int compareTo(Object o) {
return toString().compareTo(o.toString());
private String absolutePath;
private ID3v11Tag id3v11Tag;
private transient long duration = -1;
private transient int type = TYPE_UNKNOWN;
public static final transient int TYPE_UNKNOWN = 0;
public static final transient int TYPE_MP3 = 1;
}This is class ID3V11Tag into which the data is actually stored
* Light Development Java Library
* Copyright (C) 2004 Ulrich Hilger
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
package com.lightdev.lib.audio;
import java.io.File;
import java.io.RandomAccessFile;
import java.io.IOException;
import java.io.Serializable;
import java.text.DecimalFormat;
* This class is a very simple implementation of an ID3v11Tag. It models an ID3 tag
* pretty much the same way as it is physically stored inside an audio file.
* <p>See <a href="http://www.id3.org">http://www.id3.org</a> for details about
* ID3 tags.</p>
* @author Ulrich Hilger
* @author Light Development
* @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
* @author <a href="mailto:[email protected]">[email protected]</a>
* @author published under the terms and conditions of the
* GNU General Public License,
* for details see file gpl.txt in the distribution
* package of this software
* @version Version 1, October 13, 2004
public class ID3v11Tag implements Serializable, Comparable {
* construct an ID3v11Tag and read tag content from a given file
* <p>This constructor can be used for cases where a RandomAccessFile has already
* been opened and will be closed elsewhere</p>
* @param rf RandomAccessFile the open file to read from
* @param isAtTagStartPos boolean true, if the file pointer is at the
* position where the ID3 tag starts; when false, the pointer is positioned accordingly here
* @throws IOException
public ID3v11Tag(RandomAccessFile rf, boolean isAtTagStartPos) throws IOException {
if(isAtTagStartPos) {
readTag(rf);
else {
readTag(rf, rf.length() - 128);
* construct an ID3v11Tag and read tag content from a file at a given location
* <p>This constructor opens and closes the audio file for reading</p>
* @param absolutePath String the absolute path to the audio file to open
* @throws IOException
public ID3v11Tag(String absolutePath) throws IOException {
RandomAccessFile rf = new RandomAccessFile(absolutePath, "r");
readTag(rf, rf.length() - 128);
rf.close();
* construct an ID3v11Tag and read tag content from a given file
* <p>This constructor opens and closes the audio file for reading</p>
* @param audioFile File the audio file to read from
* @throws IOException
public ID3v11Tag(File audioFile) throws IOException {
this(audioFile.getAbsolutePath());
* get a string representation of this object
* @return String
public String toString() {
DecimalFormat df = new DecimalFormat("00");
return getArtist() + ", " + getAlbum() + " - " + df.format(getTrackNumber()) + " " + getTitle();
* position to file pointer and read the tag
* @param rf RandomAccessFile the file to read from
* @param jumpPos long the position to jump to (the tag start position)
* @throws IOException
public void readTag(RandomAccessFile rf, long jumpPos) throws IOException {
rf.seek(jumpPos);
readTag(rf);
* read the tag from a given file, assuming the file pointer to be at the tag start position
* @param rf RandomAccessFile the file to read from
* @throws IOException
public void readTag(RandomAccessFile rf) throws IOException {
rf.read(tagBuf);
if(tag.equalsIgnoreCase(new String(tagBuf))) {
rf.read(title);
rf.read(artist);
rf.read(album);
rf.read(year);
rf.read(comment);
rf.read(trackNo);
rf.read(genre);
public String getTitle() {
return new String(title).trim();
public String getArtist() {
return new String(artist).trim();
public String getAlbum() {
return new String(album).trim();
public String getYear() {
return new String(year).trim();
public String getComment() {
return new String(comment).trim();
public int getGenreId() {
try {
int id = new Byte(genre[0]).intValue();
if(id < GENRE_ID_MIN || id > GENRE_ID_MAX) {
return GENRE_ID_OTHER;
else {
return id;
catch(Exception ex) {
return GENRE_ID_OTHER;
public String getGenreName() {
return genreNames[getGenreId()];
public int getTrackNumber() {
try {
return (int) trackNo[0];
catch(Exception e) {
return 0;
* Compares this object with the specified object for order.
* @param o the Object to be compared.
* @return a negative integer, zero, or a positive integer as this object is less than, equal to,
*Hi Franck,
thank you, mate. I did what you suggested (changed class attached) but that did not change the mentioned behaviour.
The first run is approximately 75 seconds with Java option -Xms40m and approx. double without, the second run and all subsequent runs are only 2-3 seconds each (!!!) even when terminating and re-starting the application between thread runs.
I'm pretty clueless about that, any more help on this anyone?
Thanks a lot and best regards
Ulrich
PS: BTW, I forgot to post the class that is filled with data by class CollectionThread, so here it is
* Light Development Playlist Editor
* Copyright (C) 2004 Ulrich Hilger
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
package com.lightdev.app.playlisteditor.data;
import java.io.File;
import com.lightdev.lib.audio.ID3v11Tag;
import javax.sound.sampled.UnsupportedAudioFileException;
import java.io.IOException;
import java.io.Serializable;
import com.lightdev.lib.audio.AudioFileDescriptor;
import com.lightdev.lib.ui.SortListModel;
import java.util.Iterator;
* Storage model for audio data.
* <p>
* <code>AudioDataModel</code> can be used to store ID3 tag data collected from
* a directory with audio files to perform queries and reports on the found data.
* </p>
* <p>See <a href="http://www.id3.org">http://www.id3.org</a> for details about
* ID3 tags.</p>
* @author Ulrich Hilger
* @author Light Development
* @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
* @author <a href="mailto:[email protected]">[email protected]</a>
* @author published under the terms and conditions of the
* GNU General Public License,
* for details see file gpl.txt in the distribution
* package of this software as well as any licensing notes
* inside this documentation
* @version 1, October 15, 2004
public class AudioDataModel extends SortListModel implements Serializable {
* constructor
public AudioDataModel() {
* add an audio track from a given audio file
* <p>This will attempt to read ID3 tag data from the file.</p>
* @param audioFile File the file to add audio data for
* @throws IOException
public void addTrack(File audioFile) throws IOException {
AudioFileDescriptor afd = new AudioFileDescriptor(audioFile.getAbsolutePath());
if (!data.contains(afd)) {
data.add(afd);
* get all tracks for agiven combination of genre name, artist name and album name. Any of
* the parameters may be null or AudioDataModel.FILTER_ALL
* <p>Ugly code, I know, but it simply hard codes all combinations of the the mentioned
* parameters. Any more elegant implementations welcome.</p>
* @param genreName String a genre name to get tracks for
* @param artistName String an artist name to get tracks for
* @param albumName String an album name to get tracks for
* @return SortListModel the found tracks in a list model
public SortListModel getTracks(String genreName, String artistName, String albumName) {
SortListModel foundTracks = new SortListModel();
Iterator e = data.iterator();
while(e.hasNext()) {
AudioFileDescriptor afd = (AudioFileDescriptor) e.next();
ID3v11Tag tag = afd.getID3v11Tag();
if(genreName == null || genreName.equalsIgnoreCase(FILTER_ALL)) {
if(artistName == null || artistName.equalsIgnoreCase(FILTER_ALL)) {
if (tag.getAlbum().equalsIgnoreCase(albumName))
foundTracks.add(afd);
else {
if(albumName == null || albumName.equalsIgnoreCase(FILTER_ALL)) {
if (tag.getArtist().equalsIgnoreCase(artistName))
foundTracks.add(afd);
else {
if (tag.getArtist().equalsIgnoreCase(artistName) &&
tag.getAlbum().equalsIgnoreCase(albumName))
foundTracks.add(afd);
else {
if(artistName == null || artistName.equalsIgnoreCase(FILTER_ALL)) {
if(albumName == null || albumName.equalsIgnoreCase(FILTER_ALL)) {
if (tag.getGenreName().equalsIgnoreCase(genreName))
foundTracks.add(afd);
else {
if (tag.getGenreName().equalsIgnoreCase(genreName) &&
tag.getAlbum().equalsIgnoreCase(albumName))
foundTracks.add(afd);
else {
if(albumName == null || albumName.equalsIgnoreCase(FILTER_ALL)) {
if (tag.getGenreName().equalsIgnoreCase(genreName) &&
tag.getArtist().equalsIgnoreCase(artistName))
foundTracks.add(afd);
else {
if (tag.getGenreName().equalsIgnoreCase(genreName) &&
tag.getArtist().equalsIgnoreCase(artistName) &&
tag.getAlbum().equalsIgnoreCase(albumName))
foundTracks.add(afd);
foundTracks.sort();
return foundTracks;
* list all artists in this model
* @return SortListModel
public SortListModel listArtists() {
SortListModel artists = new SortListModel();
artists.add(FILTER_ALL);
Iterator e = data.iterator();
while (e.hasNext()) {
ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
String artistName = tag.getArtist();
if (artists.indexOf(artistName) < 0) {
artists.add(artistName);
artists.sort();
return artists;
* list all artists in this model having titles belonging to a given genre
* @param genreName String name of the genre artists are searched for
* @return SortListModel
public SortListModel listArtists(String genreName) {
SortListModel artists = new SortListModel();
artists.add(FILTER_ALL);
Iterator e = data.iterator();
while (e.hasNext()) {
ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
String artistName = tag.getArtist();
String genre = tag.getGenreName();
if (artists.indexOf(artistName) < 0 && genre.equalsIgnoreCase(genreName)) {
artists.add(artistName);
artists.sort();
return artists;
* list all genres in this model
* @return SortListModel
public SortListModel listGenres() {
SortListModel genres = new SortListModel();
genres.add(FILTER_ALL);
Iterator e = data.iterator();
while (e.hasNext()) {
ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
String genreName = tag.getGenreName();
if (genres.indexOf(genreName) < 0) {
genres.add(genreName);
genres.sort();
return genres;
* list all albums in this model
* @return SortListModel
public SortListModel listAlbums() {
SortListModel albums = new SortListModel();
albums.add(FILTER_ALL);
Iterator e = data.iterator();
while (e.hasNext()) {
ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
String albumName = tag.getAlbum();
if (albums.indexOf(albumName) < 0) {
albums.add(albumName);
albums.sort();
return albums;
* list all albums in this model having titles belonging to a given genre
* @param genreName String name of the genre albums are searched for
* @return SortListModel
public SortListModel listAlbums(String genreName) {
SortListModel albums = new SortListModel();
albums.add(FILTER_ALL);
Iterator e = data.iterator();
while (e.hasNext()) {
ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
String albumName = tag.getAlbum();
String genre = tag.getGenreName();
if (albums.indexOf(albumName) < 0 && genre.equalsIgnoreCase(genreName)) {
albums.add(albumName);
albums.sort();
return albums;
* list all albums in this model having titles belonging to a given genre and artist
* @param genreName String name of the genre albums are searched for
* @param artistName String name of the artist albums are searched for
* @return SortListModel
public SortListModel listAlbums(String genreName, String artistName) {
SortListModel albums = new SortListModel();
albums.add(FILTER_ALL);
Iterator e = data.iterator();
while (e.hasNext()) {
ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
String albumName = tag.getAlbum();
String genre = tag.getGenreName();
String artist = tag.getArtist();
if(genreName == null || genreName.equalsIgnoreCase(FILTER_ALL)) {
if (albums.indexOf(albumName) < 0 &&
artist.equalsIgnoreCase(artistName))
albums.add(albumName);
else {
if (albums.indexOf(albumName) < 0 &&
genre.equalsIgnoreCase(genreName) &&
artist.equalsIgnoreCase(artistName))
albums.add(albumName);
albums.sort();
return albums;
* get the number of audio tracks stored in this data model
* @return int the number of tracks
public int getTrackCount() {
return data.size();
/** constant to select all items of a given part */
public static final String FILTER_ALL = " all";
}...and here the changed CollectionThread now caching found File objects in a vector
* Light Development Playlist Editor
* Copyright (C) 2004 Ulrich Hilger
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
package com.lightdev.app.playlisteditor.data;
import com.lightdev.lib.util.InfoThread;
import java.io.File;
import java.util.Vector;
import java.util.Enumeration;
* A class to collect audio data from a given storage location.
* <p>
* <code>CollectionThread</code> uses ID3 tag information to gain data.
* </p>
* <p>See <a href="http://www.id3.org">http://www.id3.org</a> for details about
* ID3 tags.</p>
* @author Ulrich Hilger
* @author Light Development
* @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
* @author <a href="mailto:[email protected]">[email protected]</a>
* @author published under the terms and conditions of the
* GNU General Public License,
* for details see file gpl.txt in the distribution
* package of this software as well as any licensing notes
* inside this documentation
* @version 1, October 13, 2004
public class CollectionThread extends InfoThread {
* constructor
* @param model AudioDataModel the data model to collect data to
public CollectionThread(AudioDataModel model) {
this.model = model;
* constructor, creates a new empty AudioDataModel
public CollectionThread() {
this(new AudioDataModel());
* set the data model to collect data to
* @param model AudioDataModel the model to collect data to
public void setModel(AudioDataModel model) {
this.model = model;
* get the data model associated to this thread
* @return AudioDataModel the data model
public AudioDataModel getModel() {
return model;
* set the directory to collect data from
* @param rootDir File the directory to collect data from
public void setRootDirectory(File rootDir) {
this.rootDir = rootDir;
* this is the method to prepare a thread to run.
protected void prepareThread() {
maxValue = -1;
filesProcessed = 0;
innerCount = 0;
fileList = new Vector();
* do the actual work of this thread, i.e. iterate through a given directory
* structure and collect audio data
* @return boolean true, if work is left
protected boolean work() {
boolean workIsLeft = true;
if(getStatus() < STATUS_HALT_PENDING) {
countElements(rootDir.listFiles());
if(getStatus() < STATUS_HALT_PENDING) {
workIsLeft = collect(); //collect(rootDir.listFiles());
fileList.clear();
fileList = null;
return workIsLeft;
* count the elements in a given file array including its subdirectories
* @param files File[]
private void countElements(File[] files) {
int i = 0;
while (i < files.length && getStatus() < STATUS_HALT_PENDING) {
File file = files;
if (file.isDirectory()) {
countElements(file.listFiles());
else {
fileList.add(file);
i++;
maxValue++;
* read data into model
* @param files File[] the file array representing the content of a given directory
* @return boolean true, if work is left
private boolean collect(/*File[] files*/) {
Enumeration files = fileList.elements();
while(files.hasMoreElements() && getStatus() < STATUS_HALT_PENDING) {
File file = (File) files.nextElement();
try {
model.addTrack(file);
catch(Exception e) {
fireThreadException(e);
filesProcessed++;
if(++innerCount > 99) {
innerCount = 0;
fireThreadProgress(filesProcessed);
return false;
int i = 0;
while(i < files.length && getStatus() < STATUS_HALT_PENDING) {
File file = files[i];
if(file.isDirectory()) {
collect(file.listFiles());
else if(file.getName().toLowerCase().endsWith("mp3")) {
try {
model.addTrack(file);
catch(Exception e) {
fireThreadException(e);
i++;
filesProcessed++;
fireThreadProgress(filesProcessed);
return (i<files.length);
/** the directory to collect data from */
private File rootDir;
/** the data model to collect data to */
private AudioDataModel model;
/** the number of files this thread processed so far while it is running */
private long filesProcessed = 0;
/** a list to temporary store found files */
private Vector fileList;
/** counter to determine when to fire progress messages */
private int innerCount = 0; -
TS1702 I need some help the apps were downloading slowly
The apps downloaded but it didn't cause it's stuck in downloading mode what should I do?
The iOS 6 update didn't work.
Please I need some help.
The apps didn't download.
Talking Angela and Ginger didn't download.
Talking Santa didn't update.Try moving the existing backup file to a safe location so that iTunes has to create an entire new file. The backup file is located here. You can delete that backup once you get a successfull backup.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP, Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory.
Maybe you are looking for
-
Different "From" names in Mail
All my mail is forwarded and funneled thruogh gmail, and then to my Mac Mail client. I have configured all my email addresses in the account tab by separating them with a comma. Great. Now I can send mail from all my email addresses... except, they w
-
Hit Error Screen output without connection to user.
Hi all, I am working on ABAP ess screen currently and I hit the above error. The situation is when i try to create the OBJID using FM 'RH_OBJECT_CREATE', it hits error. The error also include cx_sy_send_dynpro_no_receiver. The error occurred on the a
-
Power user function: cmd+shift+/ not activating menu items in Photoshop
In Photoshop (Mac OS X), I typically use the pattern type cmd+shift+/ to open the help menu, type the phrase of the menu item I want to use, and then hit enter to activate the selected menu item. I just checked Photoshop CC and the enter key does not
-
Why do my pics come out blue and hazy when i use my flash on my phone
Is there something i can do to keep my pics come out blue and hazy when i have my flash on?
-
How can I combine two accounts
I have two accounts and want to combine them to one