Need menu volume lowered relative to movie
I have a DVD project in which the feature itself has relatively low volume. In iMovie I boosted the level the max (150%). How can I raise it further? Do I have to extract it and then import it into an audio engineering program? If so, should I use QuickTime Pro or Peak? I also have Final Cut Pro 3
To lower the volume of the mp3s I use for menus, I'm wondering if I go back to iTunes and individually lower the volume in the get info options pane, will that lowering come through when I import the song into a menu of my project?
Do any other iTunes processes, like Sound Check, or the Sound Enhancer? If I adjust the starting and stopping point in a track using the get info > options panel fields will that effect how the song comes into my iDVD menu?
Thanks very much for your help!
I'm running all of the iLife 5 applications, including iTunes 5.
To lower the volume of the mp3s I use for menus
You have to open these in a sound editing porgam. iMovie will do in a pinch, but you have to add some video (A Ken Burns clip will do). Lower the volume of the MP3, and then Share>Quicktime>Expert Settings>Sound to AIFF. Use the new AIFF with lower volume in your menu.
John
Similar Messages
-
Menu Bar - Sound Volume icon does not move with the press of the F key
So I normally press the F keys to control the Sound Volume, right, just like everyone else does -
but the Sound Volume icon in the Menu Bar at the top right does not respond to the F key at all!
Isn't it supposed to react simultaneous with the press of the F key?
I have to actually use my mouse click to make that volume go up and down.
The actual volume does work with the F key, it goes up and down.
But to make the 2 work in sync, I have to point the mouse to the one at the Menu Bar, fiddle with it, and then I can use the F key and both work together at the same time.
If I haven't touched the Menu Bar one for a while and I only use the F key, the Menu Bar one doesn't move at all.
It's weird. Any ideas?I see what Al is seeing. Normally I just use one method or the other. The Volume Adjustment keys provide visual feedback, so it's unnecessary to check the menu extra, i.e. the Volume menu bar icon, to see the same feedback.
The slight delay in the reaction of the Volume menu extra, when open and while adjusting the volume with the Volume keys is normal.
They're independent methods for adjusting the Volume setting. The Volume menu extra takes a moment to refresh when the slider is displayed and you're changing the setting via the Volume keys.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
Need menu bar on BOTH displays when using external monitor
How can I have the menu bar on BOTH displays without using the "Mirror Display" mode???
I bought a Thunderbolt and use it with my MBA. It works fine overall but this is still like having one display instead of two. A real downer!!
There are 2 modes:
Mirror Displays: (identical screen: why waste valuable screen realestate?)
"Normal" mode: where it gives you access to the 2 monitors independently (you can move apps. windows and locate them on any screen you want).
In the "Normal" mode, you can move the menu bar from one display to the other but it does not resolve the problem. We need TWO menu bars, which work identical and can be used on whatever display the mouse cursor happens to be.
Currently, let's say I have applications A & B displaying on MBA, applications C & D displaying on TB, and the Menu Bar on TB. It is a nightmare to work!!!! Anytime I want to work on A or B I have to move the mouse side way to get to the MBA, then to use the menu, I can't even move up into the TB all the way to the menu bar: I have to move through the side onto the TB then up to the menu bar, select, down through the TB, side way to the MBA, and on and on and on....
Anybody knows how to duplicate a functional menu bar without Mirror Display?
Anyway of simplifying this nightmare?
ThanksI asked the same question a few days ago, got some other options then ...
https://discussions.apple.com/message/16953617#16953617
Many many things to try ... -
Need Menu Exit for T-Code ME32K in ECC
Hello,
I need Menu Exit for Transaction ME32K in ECC version, It would be helpful if any one could tell me,
Deserving answer will be rewarded points
Regards
Rajeshhi
use this program to search for the BADIS and enhancements
& Report ZPJA_PM002 (V2) &
& Text Elements: &
& P_DEVC Show user-exits from development class &
& P_LIMIT Limit submit program selection &
& P_FUNC Show function modules &
& P_SUBM Show submit programs &
& S01 Selection data (TCode takes precedence over program name) &
report zpja_pm002
no standard page heading
line-size 158.
*tables: enlfdir. "Additional Attributes for Function Modules
data: tabix like sy-tabix,
w_linnum type i,
w_off type i,
w_index like sy-tabix,
w_include like trdir-name,
w_prog like trdir-name,
w_incl like trdir-name,
w_area like rs38l-area,
w_level,
w_str(50) type c,
w_funcname like tfdir-funcname.
constants: c_fmod(40) type c value 'Function modules selected: ',
c_subm(40) type c value 'Submit programs selected: ',
c_col1(12) type c value 'Enhanmt Type',
c_col2(40) type c value 'Enhancement',
c_col3(30) type c value 'Program/Include',
c_col4(20) type c value 'Enhancement Name',
c_col5(40) type c value 'Enhancement Description'.
Work Areas: ABAP Workbench
data: begin of wa_d010inc.
data: master type d010inc-master.
data: end of wa_d010inc.
data: begin of wa_tfdir.
data: funcname type tfdir-funcname,
pname type tfdir-pname,
include type tfdir-include.
data: end of wa_tfdir.
data: begin of wa_tadir.
data: devclass type tadir-devclass.
data: end of wa_tadir.
data: begin of wa_tstc.
data: pgmna type tstc-pgmna.
data: end of wa_tstc.
data: begin of wa_tstcp.
data: param type tstcp-param.
data: end of wa_tstcp.
data: begin of wa_enlfdir.
data: area type enlfdir-area.
data: end of wa_enlfdir.
Work Areas: BADIs
data: begin of wa_sxs_attr.
data: exit_name type sxs_attr-exit_name.
data: end of wa_sxs_attr.
data: begin of wa_sxs_attrt.
data: text type sxs_attrt-text.
data: end of wa_sxs_attrt.
Work Areas: Enhancements
data: begin of wa_modsap.
data: member type modsap-member.
data: end of wa_modsap.
data: begin of wa_modsapa.
data: name type modsapa-name.
data: end of wa_modsapa.
data: begin of wa_modsapt.
data: modtext type modsapt-modtext.
data: end of wa_modsapt.
Work Areas: Business Transaction Events
data: begin of wa_tbe01t.
data: text1 type tbe01t-text1.
data: end of wa_tbe01t.
data: begin of wa_tps01t.
data: text1 type tps01t-text1.
data: end of wa_tps01t.
user-exits
types: begin of t_userexit,
type(12) type c,
pname like trdir-name,
txt(300),
level type c,
modname(30) type c,
modtext(40) type c,
end of t_userexit.
data: i_userexit type standard table of t_userexit with header line.
Function module developmnet classes
types: begin of t_devclass,
clas like trdir-clas,
end of t_devclass.
data: i_devclass type standard table of t_devclass with header line.
Submit programs
types: begin of t_submit,
pname like trdir-name,
level,
done,
end of t_submit.
data: i_submit type standard table of t_submit with header line.
Source code
types: begin of t_sourcetab, "#EC * (SLIN lügt!)
line(200), "#EC * (SLIN lügt!)
end of t_sourcetab. "#EC * (SLIN lügt!)
data: sourcetab type standard table of t_sourcetab with header line.
data c_overflow(30000) type c.
Description of an ABAP/4 source analysis token
data: i_stoken type standard table of stokex with header line.
data wa_stoken like i_stoken.
Description of an ABAP/4 source analysis statement
data: i_sstmnt type standard table of sstmnt with header line."#EC
keywords for searching ABAP code
types: begin of t_keywords,
word(30),
end of t_keywords.
data: keywords type standard table of t_keywords with header line.
function modules within program
types: begin of t_fmodule,
name like rs38l-name,
pname like trdir-name,
pname2 like trdir-name,
level,
bapi,
done,
end of t_fmodule.
data: i_fmodule type standard table of t_fmodule with header line.
& Selection Options &
selection-screen begin of block selscr1 with frame title text-s01.
parameter: p_pname like trdir-name memory id rid,
p_tcode like syst-tcode,
p_limit(4) type n default 100,
p_devc like rihea-dy_ofn default ' ',
p_func like rihea-dy_ofn default ' ',
p_subm like rihea-dy_ofn default ' '.
selection-screen end of block selscr1.
& START-OF-SELECTION &
start-of-selection.
if p_pname is initial and p_tcode is initial.
message e008(hrfpm). "Make entry on the selection screen
stop.
endif.
ensure P_LIMIT is not zero.
if p_limit = 0.
p_limit = 1.
endif.
perform data_select.
perform get_submit_data.
perform get_fm_data.
perform get_additional_data.
perform data_display.
& Form DATA_SELECT &
form data_select.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get programs/includes' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
determine search words
keywords-word = 'CALL'.
append keywords.
keywords-word = 'FORM'.
append keywords.
keywords-word = 'PERFORM'.
append keywords.
keywords-word = 'SUBMIT'.
append keywords.
keywords-word = 'INCLUDE'.
append keywords.
if not p_tcode is initial.
get program name from TCode
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
if not wa_tstc-pgmna is initial.
p_pname = wa_tstc-pgmna.
TCode does not include program name, but does have refereve TCode
else.
select single param from tstcp into wa_tstcp-param
where tcode eq p_tcode.
if sy-subrc = 0.
check wa_tstcp-param(1) = '/'.
check wa_tstcp-param+1(1) = '*'.
if wa_tstcp-param ca ' '.
endif.
w_off = sy-fdpos + 1.
subtract 2 from sy-fdpos.
if sy-fdpos gt 0.
p_tcode = wa_tstcp-param+2(sy-fdpos).
endif.
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
p_pname = wa_tstc-pgmna.
if sy-subrc <> 0.
message e110(/saptrx/asc) with 'No program found for: '
p_tcode."#EC NOTEXT
stop.
endif.
else.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode.
"#EC NOTEXT
stop.
endif.
endif.
endif.
Call customer-function aus Program coding
read report p_pname into sourcetab.
if sy-subrc > 0.
message e017(enhancement) with p_pname raising no_program."#EC *
endif.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
overflow into c_overflow
with includes.
WITH ANALYSIS.
if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
message e130(enhancement) raising syntax_error. "#EC *
endif.
check I_STOKEN for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '0'.
w_prog = ''.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endform. "DATA_SELECT
& Form GET_FM_DATA &
form get_fm_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get function module data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
Function module data
sort i_fmodule by name.
delete adjacent duplicates from i_fmodule comparing name.
loop at i_fmodule where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
refresh: i_stoken, i_sstmnt, sourcetab.
clear wa_tfdir.
select single funcname pname include from tfdir into wa_tfdir
where funcname = i_fmodule-name.
check sy-subrc = 0.
call function 'FUNCTION_INCLUDE_SPLIT'
exporting
program = wa_tfdir-pname
importing
group = w_area.
concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
i_fmodule-pname = w_include.
i_fmodule-pname2 = wa_tfdir-pname.
modify i_fmodule.
read report i_fmodule-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '1'.
w_prog = i_fmodule-pname2.
w_incl = i_fmodule-pname.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
endloop.
if p_devc = 'X'.
loop at i_fmodule.
clear: wa_tadir, wa_enlfdir.
select single area from enlfdir into wa_enlfdir-area
where funcname = i_fmodule-name.
check not wa_enlfdir-area is initial.
select single devclass into wa_tadir-devclass
from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = wa_enlfdir-area.
check not wa_tadir-devclass is initial.
move wa_tadir-devclass to i_devclass-clas.
append i_devclass.
i_fmodule-done = 'X'.
modify i_fmodule.
endloop.
sort i_devclass.
delete adjacent duplicates from i_devclass.
endif.
endform. "GET_FM_DATA
& Form GET_SUBMIT_DATA &
form get_submit_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get submit data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
w_level = '0'.
loop at i_submit where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab.
refresh: i_stoken, i_sstmnt, sourcetab.
read report i_submit-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
continue.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_prog = i_submit-pname.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
restrict number of submit program selected for processing
describe table i_submit lines w_linnum.
if w_linnum ge p_limit.
w_level = '1'.
endif.
i_submit-done = 'X'.
modify i_submit.
endloop.
endform. "GET_SUBMIT_DATA
& Form DATA_SEARCH &
form data_search tables p_stoken structure stoken
using p_level p_prog p_incl.
loop at p_stoken.
clear i_userexit.
tabix = sy-tabix + 1.
i_userexit-level = p_level.
if i_userexit-level = '0'.
if p_incl is initial.
i_userexit-pname = p_pname.
else.
concatenate p_pname '/' p_incl into i_userexit-pname.
endif.
else.
if p_incl is initial.
i_userexit-pname = p_prog.
else.
concatenate p_prog '/' p_incl into i_userexit-pname.
endif.
endif.
Include
if p_stoken-str eq 'INCLUDE'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs 'STRUCTURE'.
check not wa_stoken-str cs 'SYMBOL'.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Enhancements
if p_stoken-str eq 'CUSTOMER-FUNCTION'.
clear w_funcname.
read table p_stoken index tabix.
translate p_stoken-str using ''' '.
condense p_stoken-str.
if p_prog is initial.
concatenate 'EXIT' p_pname p_stoken-str into w_funcname
separated by '_'.
else.
concatenate 'EXIT' p_prog p_stoken-str into w_funcname
separated by '_'.
endif.
select single member from modsap into wa_modsap-member
where member = w_funcname.
if sy-subrc = 0. " check for valid enhancement
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
append i_userexit.
else.
clear wa_d010inc.
select single master into wa_d010inc-master
from d010inc
where include = p_prog.
concatenate 'EXIT' wa_d010inc-master p_stoken-str into
w_funcname
separated by '_'.
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
endif.
endif.
BADIs
if p_stoken-str cs 'cl_exithandler='.
w_index = sy-tabix + 4.
read table p_stoken index w_index into wa_stoken.
i_userexit-txt = wa_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-type = 'BADI'.
append i_userexit.
endif.
Business transaction events
if p_stoken-str cs 'OPEN_FI_PERFORM'.
i_userexit-type = 'BusTrEvent'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-modname = i_userexit-txt+16(8).
case i_userexit-txt+25(1).
when 'E'.
clear wa_tbe01t.
select single text1 into wa_tbe01t-text1 from tbe01t
where event = i_userexit-txt+16(8)
and spras = sy-langu.
if wa_tbe01t-text1 is initial.
i_userexit-modtext = ''. "#EC NOTEXT
else.
i_userexit-modtext = wa_tbe01t-text1.
endif.
i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
when 'P'.
clear wa_tps01t.
select single text1 into wa_tps01t-text1 from tps01t
where procs = i_userexit-txt+16(8)
and spras = sy-langu.
i_userexit-modtext = wa_tps01t-text1.
i_userexit-modname+8 = '/Process'.
endcase.
append i_userexit.
endif.
Program exits
if p_stoken-str cs 'USEREXIT_'.
i_userexit-type = 'Program Exit'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
append i_userexit.
endif.
Submit programs
if p_stoken-str cs 'SUBMIT'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
replace all occurrences of '''' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Perform routines (which reference external programs)
if p_stoken-str cs 'PERFORM'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if not wa_stoken-ovfl is initial.
w_off = wa_stoken-off1 + 10.
w_str = c_overflow+w_off(30).
find ')' in w_str match offset w_off.
w_off = w_off + 1.
wa_stoken-str = w_str(w_off).
endif.
check wa_stoken-str cs '('.
w_off = 0.
while sy-subrc = 0.
if wa_stoken-str+w_off(1) eq '('.
replace section offset w_off length 1 of wa_stoken-str with ''
replace all occurrences of ')' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
append i_submit.
endif.
exit.
else.
replace section offset w_off length 1 of wa_stoken-str with ''
shift wa_stoken-str left deleting leading space.
endif.
endwhile.
endif.
Function modules
if p_stoken-str cs 'FUNCTION'.
clear i_fmodule.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if wa_stoken-str cs 'WF_'.
if wa_stoken-str cs 'IF_'.
break-point.
endif.
if wa_stoken-str cs 'BAPI'.
i_fmodule-bapi = 'X'.
endif.
replace first occurrence of '''' in wa_stoken-str with space.
replace first occurrence of '''' in wa_stoken-str with space.
if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
clear wa_tfdir.
concatenate wa_stoken-str '%' into wa_stoken-str.
select single funcname into wa_tfdir-funcname from tfdir
where funcname like wa_stoken-str.
if sy-subrc = 0.
i_fmodule-name = wa_tfdir-funcname.
else.
continue.
endif.
else.
i_fmodule-name = wa_stoken-str.
endif.
i_fmodule-level = p_level.
append i_fmodule.
endif.
endloop.
endform. "DATA_SEARCH
& Form GET_ADDITIONAL_DATA &
form get_additional_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get additional data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
loop at i_userexit.
Enhancement data
if i_userexit-type cs 'Enh'.
clear: wa_modsapa.
select single name into wa_modsapa-name from modsap
where member = i_userexit-txt.
check sy-subrc = 0.
i_userexit-modname = wa_modsapa-name.
clear wa_modsapt.
select single modtext into wa_modsapt-modtext from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
i_userexit-modtext = wa_modsapt-modtext.
endif.
BADI data
if i_userexit-type eq 'BADI'.
clear wa_sxs_attr.
select single exit_name into wa_sxs_attr-exit_name from sxs_attr
where exit_name = i_userexit-txt.
if sy-subrc = 0.
i_userexit-modname = i_userexit-txt.
else.
i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
endif.
clear wa_sxs_attrt.
select single text into wa_sxs_attrt-text from sxs_attrt
where exit_name =
wa_sxs_attr-exit_name
and sprsl = sy-langu.
i_userexit-modtext = wa_sxs_attrt-text.
endif.
modify i_userexit.
endloop.
get enhancements via program package
clear wa_tadir.
select single devclass into wa_tadir-devclass from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = p_pname.
if sy-subrc = 0.
clear: wa_modsapa, wa_modsapt.
select name from modsapa into wa_modsapa-name
where devclass = wa_tadir-devclass.
select single modtext from modsapt into wa_modsapt-modtext
where name = wa_modsapa-name
and sprsl = sy-langu.
read table i_userexit with key modname = wa_modsapa-name.
if sy-subrc <> 0.
i_userexit-modtext = wa_modsapt-modtext.
i_userexit-type = 'Enhancement'. "#EC NOTEXT
i_userexit-modname = wa_modsapa-name.
i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
i_userexit-pname = 'Unknown'. "#EC NOTEXT
append i_userexit.
endif.
endselect.
endif.
endform. "GET_ADDITIONAL_DATA
& Form DATA_DISPLAY &
form data_display.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Prepare screen for display' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_userexit by type txt modname.
delete adjacent duplicates from i_userexit comparing txt modname.
format headings
write: 'Enhancements from main program'. "#EC NOTEXT
write: /.
uline.
format color col_heading.
write: / sy-vline,
(12) c_col1, "Enhanmt Type
sy-vline,
(40) c_col2, "Enhancement
sy-vline,
(30) c_col3, "Program/Include
sy-vline,
(20) c_col4, "Enhancement name
sy-vline,
(40) c_col5, "Enhancement description
sy-vline.
format reset.
uline.
format lines
loop at i_userexit.
set line colour
case i_userexit-type.
when 'Enhancement'.
format color 3 intensified off.
when 'BADI'.
format color 4 intensified off.
when 'BusTrEvent'.
format color 5 intensified off.
when 'Program Exit'.
format color 6 intensified off.
when others.
format reset.
endcase.
write: / sy-vline,
i_userexit-type,
sy-vline,
i_userexit-txt(40),
sy-vline,
i_userexit-pname(30),
sy-vline,
i_userexit-modname(20),
sy-vline,
i_userexit-modtext(40),
sy-vline.
endloop.
format reset.
uline.
user-exits from development class of function modules
if p_devc = 'X'.
write: /.
write: / 'User-exits from function module development class'."#EC
*NOTEXT
write: 157''.
uline (90).
write: 157''.
loop at i_devclass.
clear wa_modsapa.
select name from modsapa into wa_modsapa
where devclass = i_devclass-clas.
select single name modtext into corresponding fields of wa_modsapt
from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
format color 3 intensified off.
write: / sy-vline,
(12) 'Enhancement',
sy-vline,
wa_modsapa-name,
sy-vline,
wa_modsapt-modtext,
sy-vline.
endselect.
endloop.
uline (90).
format reset.
endif.
describe table i_fmodule lines w_linnum.
write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_func = 'X'.
display fuction modules used in program
uline (38).
write: 157''.
loop at i_fmodule.
write: sy-vline,
i_fmodule-name,
sy-vline,
i_fmodule-bapi,
sy-vline.
write: 157''.
endloop.
uline (38).
endif.
describe table i_submit lines w_linnum.
write: / c_subm , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_subm = 'X'.
display submit programs used in program
uline (44).
write: 157''.
loop at i_submit.
write: sy-vline,
i_submit-pname,
sy-vline.
write: 157''.
endloop.
uline (44).
endif.
issue message with number of user-exits displayed
describe table i_userexit lines w_linnum.
message s697(56) with w_linnum.
endform. "DATA_DISPLAY
reward points if it helps
gunjan -
I don't see TV Shows in my apple tv menu? I only have movies, music, computers and settings. Help anyone?
Welcome to the Apple Community.
There appears to be a large increase in this type of problem at this time, it seems that that there is a problem at Apple's end, but I couldn't at all be sure.
There are no issues being reported at Apple’s System Status page, but this status may yet be updated and it may be you need to try again a little later.
This isn't affecting me here in the UK, where exactly are you.
So far I have noted users in the following locations having similar problems:
USA
If this is a problem at Apple’s end, it rarely happens, however when it does only Apple can fix it. When this has occurred previously it has usually been resolved in a few hours or slightly more. -
Help needed to create Quik Time VR movies, step by step
Hello,
thank you for your attenction.
I need to create Quick time vr movies, and I need to know the exact sequance of steeps to do it, and if the starting point I use is correct.
1) I shooted a sequence of photos with my digital camera (for example: www.stebianchi.com/quicktimevrhelp/still-photo.jpg).
2) Then, with photoshop (CS4) I choose: Automate/photomerge and I select all them to joint them in a bigger 360° panoramic one (www.stebianchi.com/quicktimevrhelp/pan.jpg). If, untill here, all is correct, the first question: in photoshop Photomerge layout option, do I have to choose one voice "auto, perspective, cylindrical, spherical, etc..." rather than anoter one of these?
3) from here, I really need your help.
First of all: the great doubt:
My photos can not cover a spherical panorama, they're only a "ring" around a center (and not a spherical texture). To cover all the surface (or almost all, ok...) of my ambient, do I have to use a wider lens on my camera or there is a different solution (for ex a vertical photomerge?).
4) Done this, I think I shuold buy a software like Cubic converter, to set and export the QTVR movie. Right?
Thanks a lot guys,
all the best!
StefanoYou can call your local apple store(find one on the home page of apple.com) and they will give you instructions how to convert DVD to iPod. That is what they told me, but from what I heard, you may need more than Quicktime Pro. Just call and ask them, because if you make a manual of how to do it, it could help me a lot.
(I'm looking for a good DVD converter, already know some, beside the internet download ones) -
How do I get more volume when watching a movie and can I use headphones?
How do I get more volume when watching a movie? And can I also use headphones?
Many governments now limit how loud headphones can go. Europe has been plagued with this for many years. Separate amplifiers are available.
I believe volumes should be kept at reasonable levels to avoid hearing loss, but it's not the governments job to protect me.
I prefer Beyerdynamic over Bose Headphones. (They spend a lot less money on advertising.)
http://www.amazon.com/beyerdynamic-DT770-PRO-250-ohm/dp/B0006NL5SM/ref=sr_1_1?s= electronics&ie=UTF8&qid=1308969660&sr=1-1 -
Need to show data related to Process order request , BOM in a smart form
Hi,
I need to show data related to
Process order request
BoM
Now in selection screen we are entering the followings.
Manufacturing Plant ,MRP Controller, Production scheduler, Order type , Order , Material, Sales order, WBS Element,Release,Scheduled start, Scheduled finish ,Selection profile.
how to get 1> Process Order number,Produced Material,Material Description,Print date,Narcotics indicator , Quantity produced , Phase number , Phase description ,Resource description,Standard value to show in a request form.
2> Item category ,Component code,Component description , Component quantity ,Component Unit of measure ,BoM base quantity.
Please help me how to get those values , what should be the aaproach , how to write the select quiry.
ThanksHi
To get BOM details, do the following:
1. Use the material number and goto Article to BOM link table (MAST) to get STLNR (BOM).
2. With this STLNR, goto STPO table (where STLNR is the key field). Here you will get all the BOM details like components (IDNRK), UoM (MEINS) etc....
Hope this helps.
THanks
Vijay
<b>PLZ REWARD POINTS IF HELPFUL</b> -
My apple tv main menu no longer displays the "movies" section, just internet, computers, and settings. Does anyone know why or how to get it to show again? Recently rented a movie directly through apple tv but can't see the "movies" section in main menu now. WiFi and home sharing are working.
Welcome to the Apple Community.
Check the location setting for the iTunes Store is correct.
You might also try restarting the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
If you are still having problems try a restore. -
What software do I need to view files or watch movies on my imac/time capsule, from my macbook (away from home)?
imac is running lion...macbook is couple years old.
thnxIt appears you have a iPad Mini and a MacBook. Assuming that, this
About renting movies from the iTunes Store - Apple Support
says
If you rented the movie on your iOS device or Apple TV, you can’t move it to any other device.
This is the Mac Mini desktop forum -
Authorization Object Related To Movement Type
Hi,
I meet one problem, one user want to check which user can use MB1A t-code with movement type 201 and 202, but I know there are some authorization object related to movement type and I want to use suim with mb1a t-code and authorization object to check the user, but I don't know the authorization object about movement type in MB1A t-code, does anyone can help?Go to SU24, enter the transaction code and press execute.
Here you can see the all authorization object whose are used for the transaction code MB1C.
Regards
Dev -
HT1657 do you need internet to watch a rented movie from itunes
Do you need internet to watch a rented movie from itunes?
Welcome to the Apple Community.
From my own personal experience, I have found that when I turn off the Wi-Fi on my Wi-Fi only iPad, I am still able to play rented movies on it. I have tried this perhaps four or five times and in each case, this has been the result. I have also noted that other users have had the same experience as I.
However saying that I have noted a small number of users that have stated they are unable to view rented movies without an Internet connection. This knowledge base article from Apple, also suggests that an Internet connection is required. -
In which Board we need to post cRIO related Questions?
sir,
In which board do i need to post cRIO related Questions and doubts regarding my application with cRIO .Please help me previously i have posted in motion control drives as my application is related to motor control using cRIO.bu i am not getting any reply .i couldnt find any cRIO related board in select board option.
Solved!
Go to Solution.Hi illa,
You can post your query under the Real Time Measurement and Control
http://forums.ni.com/t5/Real-Time-Measurement-and/bd-p/280 -
Need back and forward functions for moves
I have a working tictactoe game with implemented back and forward moves buttons, but i don't have any idea how to create the two functions using linked lists. can anyone please suggest these functions and provide some code snippets?
Java4Geek wrote:
that's the problem! i'm not using anything for move storing (yet) because I am confused about what exactly needs to be stored for a move. should be something like a node of (player, player's move, opponent's move)?why would you want to store the move AND the opponent's move in a single node? (not saying you're wrong, just wondering why you'd want to do that.)
Think about the information that you'd need to know in order to go backward or forwards.
Would you need to know which player made the move?
Would you need to know what the player's move was? -
I need any E-mail related to Apple ?
please...
i need any E-mail related to Apple ?
Regards...khaled101 wrote:
Thanks, but sorry, i can not find any E-mail in your link .
That should tell you that email is not an option. You need to use one of those provided by the link instead.
Maybe you are looking for
-
Itunes in Windows XP no longer recognizes my device (ipod nano 2)
My ipod nano 2 is no longer recognized as a "device" on my Windows XP & in i-tunes. I have downloaded most recent version of i-tunes and of Mozilla Firefox to no avail. I have used 3 different connection cables between ipod & computer to no avail.
-
TS3989 how can i see photos in iCloud?
how can i see the photos from photo stream on icloud.com?
-
Macbook Model A1138 display problem
Hi fellow Mac users. I have a Macbook Model a1138 with a 15" screen. Its been a great computer till now. In the last month the screen has gone all wonky. If you move the screen at all it develops a horizontal line at about 1/3 of the way down the scr
-
Can't see phone in File Manager
Hey. Bought a new Nokia 2730 today and managed to get some music into it. Everything worked fine so far; the phone has connected without any problem, I can see it in PC suite and all that things. But when I select File Manager, there is nothing. I ca
-
Performance issue with NOT LIKE 'VA%' in Sql Query
I'm fetching vendor details from po_vendor_sites_all , in the where clause i use vendor_site_code NOT LIKE 'VA%'. Database:10g NOT LIKE is reducing the performance, any other option to increase the performance. Any suggestions? Thanks dow005