Need MICR compatible ink cartridge for Officejet Pro 8500A Premium to print checks.

I need to print bank accepted checks on my Officejet Pro 8500A Premium printer using MICR ink.  I cannot find a compatible MICR cartridge for this printer.  There are MICR cartridges available for other HP printers.  Does anyone know of a compatible cartridge? 

Try using the multilevel uninstaller in the HP software driver CD. Browse the contents of the CD and look for the "Util" folder and open it. In the "Util" folder, open the "CCC" folder. In the "CCC" folder, double click on the "Uninstall_L3.bat" file. Don't use the "Uninstall_L4.bat" file. It could remove files that have shared dependencies with the HP software. Restart the computer and then reinstall the software afterwards. Let me know if it worked or not.
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

Similar Messages

  • Unable to install using the Windows 2008 Driver for Officejet Pro 8500A Premium

    I have been trying to figure out why I am unable to install the drivers from the link below.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109378-2&cc=us&dlc=en&lc=en...
    The site indicates that they are suitable for windows 2008 x64 but the install fails with the error below.

    Hi,
    Be sure to follow the steps below to install the printer on a Windows 2008 server, the installation should not be used as standard, but by customizing the installer using an Msiexe ccommand.:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03351547&cc=us&dlc=en&lc=en&product=4083971&tmp...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Officejet Pro 8500A is not printing with Yellow cartridge. Full cartridge and good health ...

    I have an OfficeJet Pro 8500 which is not printing with the Yellow cartridge.  Printing with the Cyan, Magenta, and Black cartridges is fine.  Diagnostics show all cartridges properly installed and having adequate ink supplies.I replaced the Yellow cartridge with a brand new XL cart, but to no avail.  I cleaned the orifice with Isopropyl alcohol and a cotton swab, thinking perhaps there was some dried ink or an impurity there.  The problem still exists.There are no error messages, either via software or at the printer itself.  The printer is out of warranty (imagine that!).I have used HP products for well over 15 years, partly because HP support has been historically excellent.  After reading some of the posts on these forums, it seems that HP has allowed their support quality to diminish - significantly.  I hope that is not the case in real life.Any ideas out there?

    I am having same problem. OfficeJet Pro 8500A Premium.  Not printing with Yellow. First replaced Yellow cartridge with new, then spoke with HP Support yesterday and was told that the Black and Yellow Printhead must need to be replaced, at a cost of $49.  New Printhead arrived today, inserted and still having same issue with YELLOW! So, for the cost of a new Multi-Pack of print cartridges (which had the Yellow I used to replace the low ink), and the new Printhead, I could have purchased a NEW CANNON PRINTER.  I have used HP Products for over 20 years - both professionally (HP Plotters) and at home (always HP Printers, Scanners, Multi-devices, etc.  I am VERY frustrated!

  • Auto switch from tray 1 for envelopes to tray 2 for letters on HP Officejet Pro 8500A Premium

     Hi I have a HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n My Operating System is XP Media Center.  I haven't been able to get it to switch from one tray to the other automatically. Also  it only remembers 1 type of paper at a time. I can't get it to show in Properties, Paper  available, more than one type of paper. I open device settings, Form To Tray Assignment, Printer Auto Select :Letter.     Tray 1 : Letter   Tray 2 : Letter.   Now I change Tray 1 : to Envelope #10  click apply, click ok, it closes out. I open the Properties back up & Tray 1 : is back to letter.  Is there a way to get the printer to remember the it is set up with 2 Trays with 2 different types of paper ? I think the problem lies with the Printer Auto Select : But I am not sure. I would like to be able to print an address on an envelope when working in works. Without having  to manually change the Tray settings. Does any one Know How to set this up ? Thanks in advance for taking the time to read this issue.
    This question was solved.
    View Solution.

    Hi MrHope,
    Make sure that the printer is set to have tray 2 as the default tray, and then try setting the paper types for each tray in the printer settings.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02917871
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • How can I download the Printer Manuel for OfficeJet Pro 8500A. Thank You.

    How can I download the Printer Manuel for OfficeJet Pro 8500A.  The easy way.  Thank You.
    This question was solved.
    View Solution.

    Hi,
    You can download the User Guide on the link below.
    http://h10032.www1.hp.com/ctg/Manual/c02668142.pdf
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hp Officejet Pro 8600 Premium suddenly printed very slowly from PC

    Hi, and thanks for any insights.
    I have a client with an Officejet Pro 8600 Premium, and printing to this printer over USB has suddenly become very slow.  The dedicated PC is XP with 2 GB of ram and only using 40 GB on a 200 GB drive.  The printer has two trays, with tray1 dedicated to checks, and tray 2 for anything directed to plain paper.  The printer is not connected to a network, but dedicatd to this PC.  The PC is current with updates.
    Checks print at the normal speed, and copying prints at reasonable speed, but whejn printed from the PC anything directed to tray 2 prints at a snail's pace .  This is new behavior.
    I have printed status pages and performed print head and allignment processes.  Still, this behavior persists.
    I looked i the event log and saw nothing that suggested an evident system issue.  Windows update only shows Security Essentials updates for the duration during which the slowness started.
    The PC is not acting strangly in any other way.
    Any suggestion would be helpful.

    Hi,
    The information is very general, this applies for many HP printers:
    Solution 1: Use a lower print quality setting
    Solution: Check the print quality setting. Best and Maximum dpi provide the best quality but are slower than Normal or Draft. Draft provides the fastest print speed.
    Cause: The print quality was set to a high setting. If this did not solve the issue, try the next solution.
    Solution 2: Check the ink levels
    Solution: Check the estimated ink levels in the ink cartridges. NOTE: Ink level alerts and indicators provide estimates for planning purposes only. When you receive a low on ink message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace the ink cartridges until print quality becomes unacceptable.
    CAUTION: Wait until you have a new ink cartridge available before removing the old ink cartridge. Do not leave the ink cartridge outside of the printer for an extended period of time. This can result in damage to both the printer and the ink cartridge.
    For more information, see: Check the estimated ink levels
    Cause: The ink cartridges might have insufficient ink. Printing with depleted cartridges slows the printer. If this did not solve the issue, try the next solution.
    Solution 3: Contact HP support
    Solution: Contact HP support for service. Go to: www.hp.com/go/customercare. This website provides information and utilities that can help you correct many common printer problems.
    If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
    Cause: There was a problem with the printer.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page.

    HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page.  I continually get a message that the computer cannot communicate with the printer.   Not only will it not print docs, it will not print web pages using IE 11 or Google Chrome.
    I've used Print and Scan Doctor, it always reports there are no issues and prints a test page even though I can't print anything else. 
    Each time I want to print, I must reboot the computer.  After reboot I have one chance to print.   This problem started February 15, 2015.  
    My operating system is Windows 8.1.   I have unintalled the HP software, rebooted, then reinstalled the software:
    OJ8500_A910_1315-1.exe
    HP Print and Scan Doctor - HPPSdr.exe
    HPSupportSolutionsFramework-11.51.0049.msi
    All versions were last downloaded on April 4, 2015.
    I have a home wireless network (Ubee DDW366 router).  All other devices in the house will print to the 8500A printer without issues:  2 Toshiba laptops, 2 Android phones, and 1FireHD.
    The desk top is installed with a Netgear Network card I don't know the model, but I had it tested by a PC Tech to confirm that the card is working.   The card and Windows 8.1 were installed on January 3, 2015.
    I have run virus scans and malware scans.  Each time they show there are no issues with my desktop.  What kind of desktop? Specifically made to my specs from store parts. . . no brand name computer.  ASUS Motherboard P6X580 Premium.  Now I will probably get hacked!
    I am at my wits end.  And it is frustrating when I need to make a print of something and the system locks up.  I often resort to screen printing to a word document to save in order to reboot. . . .but then I lose all sorts of capabilites when I salvage what I needed.  Also this is a time consumer.
    This printer has served us well for two years and I have expensive cartridges waiting; another two rounds of refills.
    Help?
    Addendum:  I can scan using HP Printer Assistance.  I open the HP Printer assistant, it "retrieves" info from the printer, then I select "scan a document or photo" and the printer responds.   I have no trouble with scanning.
    This question was solved.
    View Solution.

    Hi ArielAce , thanks for getting back to me!
    I would recommend downloading and running the HP Print and Scan Doctor.
    Please keep me posted!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Hp officejet pro 8500a won't print or copy without turning off then on again

    HP Officejet pro 8500A, Will not print, copy or print received fax. HP icon on the Printer screen just spins, but never prints.  The print jobs show in the Que, but never print out. If I shut off the printer and turn it back on it will print, but after a short while it stops again. It has also asked for ink to be replaced.

    Hello pcmtgrl
    Which model of the Officejet 8500A series do you have? Typically you can find it inside the printer where you change the ink cartridges. Example: A910g, A910a, etc.
    Has anything changed recently since the problem started? Is the printer plugged into a wall outlet or a surge protector? Do you have the latest firmware installed? I also suggest running the HP Hardware Diagnostic Utility. Let me know if it finds anything out.
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • Error message C00E0060 on my officejet Pro 8500A Premium printer

    HI, Error code C00E0060 appears on discplay screen brieflky then change to blank display with the icon lights blinking.  Powering on and off the printer won't do anything.  Can't figure out any solution. I'm not able to use of the printer functions. I'd appreciate any solution you can share me.  Thanks

    Welcome ,  I saw your post regarding the problems you are having with your Officejet Pro 8500A premium getting an Error code C00E0060, and I found some information about it.
    The error you are describing could be an issue with an ink cartridge or with the printer. To narrow down and determine which is having trouble can you try the following an let me know the results;Remove all of the ink cartridges, does the message change to 'Replace the (K) (C) (M) (Y) Ink Cartridge'?Put only the black ink in,  does the message change to'Replace the (C) (M) (Y) Ink Cartridge'?Remove the black and put only one colour ink in,  does the message change to reflect the change?Remove the colour, and test each one individually. 
    When you have the ink cartridges removed, you might want to try a hard reset. To do so, leave the printer on and unplug the power cable from the back of the printer. While it is unplugged, you can hold down the power button on the printer for about 10-15 seconds to release any built up power. Then plug the printer back in and see if the error goes away. If the error message doesn't change when you do any of the above steps, it would mean that it is a fatal error with hardware, as mentioned in this similar post; Error Code C00E0060. Is the printer connected directly to a wall outlet or is it in a surge protector or a power bar? We want to connect it to a wall outlet just so we can eliminate the power source as the root cause. See this document for more information about Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector (Note: This document is not limited to Laserjet printers.)   Please let me know if these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!   Thanks, 

  • I have an HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n.

    I have an HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n.  I’m trying to set up HP Connect, but every time I create and account it tell me to log in using my Snapfish password.  When I use my “valid” Snapfish password, it comes back asking "invalid password".  How do I correct this?
    If I'm not on the correct board, please let me know which one I should use.
    Thanks
    This question was solved.
    View Solution.

    Hi. You are on the proper board!  Unfortunately to fix the account mis-match issue you are having you will need to share personal information.  To protect your identify and the security of your account I will private message you with what HP will need in order to get your Snapfish/HP Connected accounts synced up so you can use the web services!    
    Thanks!
    Although I am an HP employee, I am speaking for myself and not for HP

  • HP Officejet pro 8500A premium, all-in-one printer, scanner problems

    I have an HP Officejet pro 8500A premium, all-in-one printer.
    Tried uninstalling using the HP supplied uninstall software and installed recommended OSX 10.8 software for this device.
    I use wireless scanning. Scanner only scans the first page then shows an error.
    Anyone have this problem as well and any possible solutions?
    Thanks

    The HP Scan works just fine in Mountain Lion for me. Always has.
    OfficeJet Pro 8500 A909a
    I think the original poster needs to reinstall the latest software for the printer that came with his printer or directly from HP. Then, install the Apple HP updates.
    When he unistalled the HP software, it may have removed the software needed for HP Scan to work properly.
    The last software I installed from HP was -> HP_Installer_Officejet_Full_Group05_10.3.dmg
    Yes, there have been Apple HP updates, but they never stopped my HP Scan from working.

  • Officejet Pro 8500A Premium will not print from my laptop

    I have an Officejet Pro 8500A Premium. I jus had ot reload my driver thinking it would resolve the below issue but it did not. The connection string is  laptop -> docking station -> ethernet to router -> ethernet to printer.  On my laptop I can see the ink levels of the printer so there is a connection but when I attempt to print and select the Officejet 8500 (non fax) printer, it attempts to print to the 8500A fax and then pops up with a fax box.  
    Additional Information:
    I have tried the following:
    - Changed the port for the 8500A fax
    - Tried to set the default printer from the fax to the network printer - received an error message: Operation could not be completed (error 0x0000709). Double check the printer name and make sure that the printer is connected to the network.
    This question was solved.
    View Solution.

    Hello coolhandluke2,
    Welcome to the HP Forums.
    I see that you are having issues when attempting to print from your Laptop.
    I also see that you are getting an error 0x0000709.
    I do have a few suggestions we can try.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I am also going to give you a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error Me....
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I own a hp officejet pro 8500a premium and when i turn it on, the screen shows 83c00009

    i own a hp officejet pro 8500a premium and when i turn it on, the screen shows 83c00009

    HI I hope you are having a great day and sorry to see that you are having this issue,
    if you still having this issue  I will do my best to assist you
    Read this article follow the steps on it GO HERE
    If you are using Win xp or later you one of several very good troubleshooting utilities that HP offers GO HERE read the intendd use and run the one that fit your needs;
    If you are not experiencing this issue any longer or you are not using Windows, let me know I will be deeply appreciated
    Hope I can be of help;
    RobertoR
    remember↓↓↓
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • HP Officejet Pro 8500A Premium scans PDFs at legal size but I want letter size

    Hi, I have an iMac with OS 10.7.5 and my Officejet Pro 8500A Premium makes scans to computer that are legal size, even tho the original is letter sized. I can't see how to change this in HP Utility. I don't have HP scanning software because I was unable to install it. My doc feeder doesn't work either. Any ideas? Thank you.
    This question was solved.
    View Solution.

    Thanks a million! This worked for me.

  • How do i get the hp officejet pro 8600 premium to print from my ipad2 using airprint?

    how do i get the hp officejet pro 8600 premium to print from my ipad2 using airprint? The iPad does not see the printer.

    Hi RiverBirch,
    What brand and model is your router?
    First, connect your printer to your router.
    1. From printer front panel, press Wireless>Wireless Settings>Wireless Setup Wizard and follow the onscreen instructions to successfully connect your printer with an IP address.
    Secondly, connect your iPad to the same router.
    1. Connect your iPad to the Internet and download the free HP ePrint Home & Biz app from the apps store.
    2. Connect your iPad to the same network as the printer. Settings>Network.
    3. Use the new HP Home & Biz app to print and scan photos or docs from your iPad!
    Alternatively, you can also perform Airprint on the iPad thru the wireless network from the Photos menu in your iPad.
    Please click the blue Kudos star in the post that helped you.

Maybe you are looking for

  • Estimated Start time in notification based on Time defined in Work center

    Hi, Following Satish post- I am trying to find solution to the same  problem so i will appreciate any advise. When the notification is created ,the estimated start time should be based on priority .This in iteslf is pretty straight & simple. However

  • Calling an instance of a class please help

    Hi all, I hope this is the right forum to post this topic.I am doing so cause I am dealing with servlets.In the init() method of a servlet.I want to call an instance of another class UserPresent.java .I will post the code below public void init() { U

  • Photoshop not releasing file

    When I attempt to move or rename a file that was recently open in Photoshop I get a Windoze message that the file is still in use by a program. If I close Photoshop I have full access to the file. Closing and restarting Photoshop just to move a file

  • Exported movie looks awful

    Why does my type look fuzzy after I've exported it to QuickTime? I can't find anywhere that allows me to scale my movie before I export it so that it doesn't look pixelated when enlarged. Thanks in advance.

  • Wie mache ich das Konfigurieren eines Facebook Accounts in iPhoto rückgängig?

    Wie mache ich das Konfigurieren eines Facebook Accounts in iPhoto rückgängig? / How to remove the configuration of a facebook account in iPhoto? Ich habe den Facebook Account meiner Freundin in iPhoto konfiguriert und weiß nun nicht wie ich dieses rü