Need missing sortware

por favor nesecito ayuda mi ipod no funciona me dice error 28 cuando trato de hacer restore

Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
Above from:
http://support.apple.com/kb/TS3694

Similar Messages

"Files that iWorks needs missing" message AND other error msg

Hi-
I had a crash of both my mac (it had to be replace) and the back up system. When I reinstalled iWorks, I still get the message "Files that iWorks needs are missing". When I proceed it launches the application, but when I tried to make some upgrade download, I got the message "The eligible Pages (Numbers, Keynote) application missing from the folder Applications" - it not the case - all three are there - any idea what may be going on there?

As far as I know, the described message is not issued by iWork 's installer but by updaters.
You must start with the iWork installer which will install Keynote v4.0, Numbers v1.0, Pages v3,0 in the folder "iWork '08' in the folder "Applications".
It's only after that that you will be able to apply the updaters (those delivered last week).
Yvan KOENIG (from FRANCE mercredi 11 février 2009 21:17:48)

Help needed - Missing Files in Aperture

Hi All:
A quick question: I initially imported RAW files in to a new project. During some time I was doing adjustment to these files, a subset of these files disappeared from the browser (I checked under "all image library" and the project). I can't remember if I inadvertantly deleted them from the Library.
However, the strange thing is that I still have these files in the Aperture Library (I have checked and confirmed that they are physically in the Library and they are not referenced files).
How would I bring these files back to be shown in Aperture ?
Thanks,
Ed
mbp 17" 2.16 GHz Mac OS X (10.4.6) 2G 100G@7200

I wanted to ask anyone (close to this issue) if they've had the problem I've had after upgrading to ver. 1.5.3. Once this upgrade was done, and I opened Aperture, I noticed that lots of photos seems to be missing. specificly from July of 2006 to current. These photos were stored in several projects that I created simply listed as months (ie. 0701-Photos) meaning Jan of 2007 photos, etc.
These projects and their photos are not to be seen now. I'm hoping there're on my hard drive somewhere. I've tried to rebuild library but no luck.
Help please from anyone?? Thanks!
PowerMac G5, MacBook Pro 15 Mac OS X (10.4.9) 30" Apple Cin. display

Help desperately needed - missing SMS icon - have tried EVERYTHING!

Hello
Thank you for taking the time to read this.
For no apparent reason, about a week ago the SMS icon on my BlackBerry Curve 8900 completely disappeared. In addition, now when my phone boots up, a message appears stating ’Uncaught exception: java.lang.NullPointerException’
I have tried finding a solution online, and have attempted to do all the suggested fixes including:
- Pulling the battery out while phone is still on, and then reinserting
- Using the ‘Show All’ option
- Changing Themes
- Choosing to SEPARATE in Messages options
I can view some of my SMS messages by : Messages folder > View Folders > SMS Messages However, many of my recent SMS messages are missing from here. And when I send test SMS messages to that device from another phone, not all of them are received! In addition – and MORE IMPORTANTLY (to me) – when I try to view my saved SMS messages by : Messages folder > View Folders > Saved Messages only about 10 saved messages appear; when in fact there should be nearer 100!
Without getting too sentimental, many of my saved SMS messages were from people who are unfortunately no longer in my life, and I want to be able to read them again. I could not bear for them to be lost forever. I really hope someone can help me with this.
Thanks so much in advance for any help or advice you can offer – very gratefully received.

The only way to get your SMS icon back is to reload your OS using BlackBerry Desktop Software. I can't guarantee you'll get all your messages back but at least you'll have the icon from which to view your messages.
To reload your OS, plug your phone in to your PC and open BlackBerry Desktop Software. Once your phone has connected to the software, click Device at the top of the software then click Backup and Restore. Do a data backup. When the backup has been done, follow the same path I suggested but this time at Backup and Restore click Restore and load the backup file you just created. This will restore your SMS icon.
Let us know if that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

SDN Downloaded tutorial TutWD_Tree needs missing libraries

HI All
SDN Downloaded tutorial TutWD_Tree has build errors due to missing libraries. is some one faced similar problem what are the libraries we have to include and where will i get these libraries.
any suggestions please
-Manohar

Hi,
I had the same problem. I think the reason is indeed that you are working with some newer version of the Studio. My version is 2004s (Version: 7.0.06 Build id: 200601142119). The example project references some directories like "com.sap.dictionary.runtime" (located under ...SAP\IDE\IDE70\eclipse\plugins). In my installation the name of this directory is a little different: "com.sap.dictinary.runtime_2.0.0". To solve this problem you will have to replace some jar-files referenced by the project. This works as follows:
Right-click the project, then select "Properties" from the contex-menu. A new dialog appears. At the right side of this dialog select "Java Build Path". At the left you will see 4 tabs, select "Libraries". The references jar-files will be displayed. Probably several of them will be marked with a little yellow "!". For each marked jar-file perform the following steps:
Select the jar-file. Press "Edit...". A new dialog will appear. Press "Extension...". A file-selection-dialog appears, where you can select the jar-file in the right directory.
- Christoph -

Installed Windows 7 64bit but need missing Toshiba applications

Last weeek I had installed Windows 7 64 Bit Version and I did not manage to find the following Programs from Toshiba:
1) Acoustic Silencer
2) Toshiba Easy Media Program for DVD
3)Tempro
4)SD Utilites
5)Super Visor Password Utility.
Please can someone help me on this issue and if possible could someone send me the full list of Programs that Toshiba Laptops comes out with.
Thanks

It will be nice if you can post this in your previous thread under http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=189703
And we can continue discussion there.

Need Missing Templates For Flash CS4

I am looking for these templates: Brew Handsets, Consumer Devices, Global Handsets, Japanese Handsets and Photo Slideshows.
I understand that they were included in Flash CS3. Unfortunately, I removed my Flash CS3 before installing Flash CS4.
Does Adobe have a place to download these templates. If not, they should!

Apple changed the New Project Assistant in Xcode 3.2. Choose Application under Mac OS X on the left side of the New Project Assistant. Choose the Command Line Tool project from the list of application projects. Use the Type pop-up menu to specify the type of command-line tool project you want to create. Choose Foundation for an Objective-C command-line project.

Need missing password to reset missing password

I seem to be stuck in a classic Catch 22. My sister has given me her new Mac book running Snow Leopard. Unfortunately, she cannot remember her password. I have followed the instructions for re-setting the password:
Insert OSX disk
Utilities
Re-start etc
However, when I get to restart up pops a box asking for the forgotten password, which of course if I knew, I wouldn't be trying to re-set it in the first place!
Has anyone encountered this problem and if so is there a way around it?

Dame Hyndman wrote:
I am following the instructions to re-set my password. According to the blurb, I should put in my OSX disk, get into utilities and hit re-start. At this point it is meant to restart, ask me me what language and via utilities offer the opportunity to reset my password.
those are not the correct instructions.
see here
http://docs.info.apple.com/article.html?path=Mac/10.5/en/11627.html
you insert the disk and reboot normally from the apple menu. hold "c" at the chime. this will boot you directly into the installer. no passwords required. once you are booted into the installer start the reset password utility from Utilities menu.
but i would recommend that at that point you wipe the hard drive and reinstall the OS rather than simply resetting the password. this will give you a clean system which will be entirely yours to control and you'll know exactly what's on it or not. you can erase the drive using disk utility (it's also in the Utilities menu) while booted from the install DVD.
I get as far as utilities, hitting re-start and up comes a box asking for the password.

How can I tell which catalog a missing image belongs to?

How can I tell which catalog a missing image belongs to?
Beating a dead horse.....Everytime I need "missing images" in LR4.2, I cannot access them, even though I am looking right at the location they presntly occupy because thye image is ALREADY IN ANOTHER CATALOG.
HOW frustrating is this...going on 8 months now. But I need the images and I suppose I could just go back and reprocess 10,000 images that are missing in my collections but I have tried many solutions offered over the months that are just impractical.
So Now I want to approach this thing from the other direction...
If let's say one image is already associated with another catalog that houses that collection, ( and the collection is important because it has the edits), i want to go to that catalog instead.
How do I do this?
Any Ideas?

So Now I want to approach this thing from the other direction...
If let's say one image is already associated with another catalog that houses that collection, ( and the collection is important because it has the edits), i want to go to that catalog instead.
How do I do this?
It sounds as if you have been using separate catalogs for sets of images which are in separate folders. Perhaps you have had good reason to do that. But I would now make three linked observations:
It seems that you are now more able to both find, and distinguish, things via a folder structure - rather than via whatever classification of different catalogs you may have thought were going to be helpful to you
accordingly, having these mutiple catalogs is now getting in your way
using folders works just the same inside one big catalog, as it does inside each of two smaller catalogs.
The solution to the first two, IMO, is to merge your separate catalogs into one catalog. Then the third will kick in. You can still keep the current separate catalogs for archive or reference purposes, but the "Import from Another Catalog" function will MERGE copies of all their contents into a combined, larger catalog that you can use going forward. (The images and folders themselves, do not change in any way when you do this.)
If you wish to track which catalog each image is currently inside, you could apply some kind of keyword across all images in that catalog, before carrying out the merge. However, it sounds to me as if your folder arrangement currently mirrors the different catalogs in some way anyway - and will continue to convey the same information once combined.
Lightroom is designed to be able to work with large numbers of images more or less the same as with small numbers; and this has been anecdotally confirmed in many cases. AFAICT the main performance issue is not the size of the database, but the size and nature of the image data involved and the complexity of things you do with that, per image, also the ability of your computer system to carry these operations out, per image. (Another overall productivity issue is: do you need to keep navigating to and opening different catalogs; or... not!)
Even if you merge catalogs and then change your mind about all or some of that, you can either: retain and go back to the previous un-merged catalogs - or: to preserve further work done since merging, you can use Export as Catalog to copy out a certain highlighted set of images. Then you can Remove what you wish from the main catalog - using the exact same means of identifying which images require this - for example, the image set you have only just exported to a new catalog will still be highlighted inside the source catalog.
RP

How can I reinstall missing system fonts?

I used FontXplorer X Pro to organize my fonts sometime back. I just updated it to 9.2.2 and found in the ReadMe file that the update was correcting the fact that 9.2.1 deleted some of the system fonts. How can I restore the missing fonts?
I'm thinking of uninstalling FontXplorer and then reinstalling it and starting fresh with a new setup. But I still need missing system fonts. Safari is asking for ZapfDingBatsITC; activating the ZapfDingBats I have doesn't work.
I have the install disk for OS X Snow Leopard. There is no install disk for Mavericks since it was a download only (I believe this since I can't find the DVD). Would I be able to pull system fonts from the Snow Leopard disk? I looked the Snow Leopard disk contents but don't dare to try anything.
Thanks in advance.
Bonnie

Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then re-install the OS.
OS X Recovery
OS X Recovery (2)

After downloading ios6.0.1 for iphone 4 i am unable to transfer my outlook7 calendar and contact info to the phone - i am not now given the option on the info tab of synching with outlook -the info reads my calendar is being synched over the air w/o ?

w/o ability to change it to my preference .

Here are your options:
1. Export from Palm Desktop and import to iCal and Address Book Instructions are here:
http://www.palm.com/us/support/downloads/pre/migration/exportical.html
The downer is that this will lose your categories in Address Book, I think.
2. Get Missing Sync here:
http://www.markspace.com/products/palm/palm-sync-software.html?source=pickerpalmosmac
3. Sync the Treo to Address Book and iCal, then connect the iPhone and sync from AB/iCal to the iPhone. Instructions here
http://askville.amazon.com/Palm-Treo-700p-sync-Mac-OS-iCal-Address-Book/AnswerVi ewer.do?requestId=2508818
Number 3 is your best bet - it should retain all the categories etc. However, doing this in a hurry is a recipe for panic. My advice is to try 3 first. If you can't get it to work, try 1. Although that might lose categories, it gets everything onto the iPhone, and the iPhone's built-in Spotlight search will enable you to find people, events etc really quickly. And it's easy and quick. Later on, when you have time, you can try something cleverer.
You don't need Missing Sync

How to erase the content of a cube

Hello. How could I fully erase the data contained in a cube, preserving the outline?
Note that I don't mean substituting values with zeros, for I need MISSING VALUES and not zeros.
Thanks in advance.

Do you mean completely clearing out a database?
You can do this via EAS by right clicking on the database and selecting "Clear data"->"All data". This will clear all of the data and retain the outline, calc scripts, etc.
You can use MaxL's alter database reset data for both ASO and BSO databases.
Or do you mean clearing out selective bits of a database, using something like (BSO) CLEARBLOCK or CLEARDATA calc script commands? In ASO land, you can use MaxL's alter database clear aggregates or clear data in region commands.
Regards,
Cameron Lackpour

Tags not showing up in Dreaweaver cs5

Hello and thank yuo for reading my problem.
I'm working on my website and i came across this issue:
Dreamweaver cs5 ''disabled''? some of the tags, for example <video>, <source>, <media>, and a few others. The only tag witht he letter v is <var>, i have no idea what the issue could be. I tried adding the tag within a div, outside the surrent div and throughout different places within the layout but nothing does it.
Will anybody be able to help me? Thanks in advanced.

UPDATE:
You can forget converting the fonts, here is what really helps:
Move all of your fonts from your user library to your desktop (or whereever, just make sure to remember where), basically uninstalling all your fonts.
Then put the fonts that you need & miss in FLASH into this folder: Macintosh HD/System/Fonts
Enter your user password to confirm the movement of the files into the system folder.
Restart FLASH.
Now the formerly missing fonts should show up in FLASH.
When you're done with your Flash Project, you can delete the added fonts from the system folder and move your old fonts back to your user library in order to get your sytem back the way it was.
WARNING: Be careful while in the system folder, you don’t wanna make any mistakes there. ^^
SICK that adobe is not fixing this issue which is really hell hell hell. Hope this helps you guys in the meantime.
cheers.

Another java newbie question: "Link errors"

In the environments I've attempted compiling in, it seems that there is a just-in-time default, which means that any missing classes are not found until run time.
Is there any way to to run javac so that what we used to call "link errors" will be displayed at compile time?

Java has no .h files, so it shouldn't compile at all if a class is missing, unless:
Someone compiles class Library, they have class Extension available
They give you Library
You compile, javac sees theat "Library" exists and checks no further
At run time, you get errors about Library needs missing class "Extension"
What class is missing anyhow?

Daniel_K leaving for good. Thanks Creati

http://forums.creative.com/creativel...&thread.id=334
He posted his farewell not too long ago.
I will miss him dearly as he was the only one that gave many of us hope. Especially those of us that bought Creative products with low incomes / little alternati've to upgrade or replace or hardware that Creative refused to fully support.
You have lost an invaluable community asset.
You have also lost me as a customer - the only thing that was keeping me around was the hope you'd made good on your mistakes. This obviously did not happen.
Message Edited by Diderot on 04-03-2008 :2 AM

Lets, give a poor guy a peace...
He knows how that commmunity respects/needs/misses him...
After "possible lawsuits" let him go... he did it for free...
...and needs "a bit of silence and peace"..
BTW...
I also respect his work & effort...
...and wish him, only the best...
Gi've him a little break...
and...maybe..maybe...he will release something...when he feels he is ready again...
Anyway he deserved a little vacation, for things he already done...for US...
Show some respect and leave, him some "room"...
Until he says otherwise..
Message Edited by Etz on 04-03-2008 09:33 PM

Need missing sortware

Similar Messages

Maybe you are looking for