Need more than 2 states for MSO and rotation to work correct?

Hi,
I have a folio with images that I show in zoom mode with a MSO state.
After finishing the vertical version of the folio I have created a horizontal version with all the same objects.
I found that the active state stays only the same while rotating when there are more than 3 states?
Is this a bug?
Almute

Sounds like a bug.
For me too! Could you please report the bug?
If you’re not cycling through the states you could set a blank state in the MSO that no button would trigger. That way you’d have a third state but nobody would know.
Yes, I have duplicated the 2nd state (which is the zoomed version of the image) and have no button for this state.
Now it seams to work. - But it's much work now because the whole files with 150 pages already had been finished.
Almute

Similar Messages

Restrict email attachments if more than 1mb for internal and 250kb for external emails

Hi,
Restrict email attachments if more than 1mb for internal and 250kb for external emails ?
Can any one help me in this issue
Thanks
Deepan.T

Hi Deepan,
You can use transport rule to restrict the attachment size.
I use the following transport rule to reject the attachment size over 2MB with "5.7.1" information returned.
New-TransportRule "block large attach" -AttachmentSizeOver 2MB -RejectMessageEnhancedStatusCode "5.7.1"
For more information, here is an article for your reference.
New-TransportRule
http://technet.microsoft.com/en-us/library/bb125138(v=exchg.141).aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Which ports need to be open for messages and facetime to work properly?

I noticed that Messages no longer works since upgrading to Yosemite on my work network. But it did when i was in Mavericks. Did they change something in Messages in the upgrade that would cause it to no longer work? ports?
I'm behind my work firewall, which ports need to be open for messages to work properly?

Just make sure your 9001 port is open.
Hope this works..
Hamid

OMF export for Pyramix and ProTools not working correctly

I am exporting OMF files of very simple timelines (30 second promos) for an audio guy based in another part of the country to do audio post.
He is using Pyramix 7.1.10 and ProTools 9.1, while I'm outputting from Premiere 6.0.1
The problem is that when he imports the .OMF (which is exported 24bit, trimmed audio, encapsulated files), one leg of the music track is always missing
This happens the same in both ProTools and Pyramix
Has anyone else had this happen? Am I missing something? Is there a workaround?
All help appreciated
Thanks
jON

I am a post audio mixer working in ProTools, and I have the same issue, just a little more complicated.
The editors I work with handle a variety of projects, most of which use sound shot with EFP cameras. The audio recorded on these cameras is "stereo" in the sense that there are indeed 2 tracks as a single interleaved file, however, the content is dual mono, with the 2 tracks either being 2 lav mics, or a lav and the camera mic.
Is there any way in Premiere that this can be put onto 2 mono tracks, that are then exported as mono tracks, rather than being doubled up in the ProTools session? Adaptive tracks don't seem to work in this situation. The editors have tried a variety of things, none of which seem to make a difference.
Also, regarding stereo music ... that too has been exported to me as a mono file, even though it was supposedly put onto a stereo track in Premiere.
Thanks for any insights.

I have more than one apple id and need to coordinate them

I have more than one Apple ID and cant coordinate them over my devices

That's correct. They cannot be merged nor terminated. You can stop using them. Note that anything you purchased (free or paid) is permanently connected with the Apple ID used to purchase those items. Only Apple has the ability to make those changes, so you would need to ask them for help.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

My imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I've

my imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I’ve tried shutting it down and unplugging it, and that does not work -- I’ve run disk utilities checked permissions, and run anti-virus and get no adverse results – I cannot figure out what is different that causes this problem

From previous experience 3 indicates a shutdown initiated by the SMC (System Management Controller) — hardware responsible for many low-level functions including power, sleep, lights, and fan activity.
Try resetting it:
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.

I downloaded the pokemon yellow version app for my ipod touch more than a month ago and it is still not working. It has not worked for anybody who bought it. How can I get my money back?

I downloaded the pokemon yellow version app for my ipod touch more than a month ago and it is still not working. It has not worked for anybody who bought it. Why is it off of the app store now and how do I get my money back?

That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod

PS CC Says I need more than 512 Vram ...

I was using Photoshop last night just to prep a couple of photos for class submission (3 pictures, just reducing their size for web consumption), and I got the message stating that I needed more than 512 Megs of Vram, which was odd to me, as I have 1024 Dedicated available on my video card. I don't run a dual monitor setup any longer, but I do have an ASUS PBs278 that's running at 2560 X 1440. My current graphics card is an ATI Radeon 6800 HD, and my windows 7 system is running on 8 gigs of ram. Up till within the last week, CC has worked just fine, but the other day on boot, it took an unusually long time to get into the software. It eventually did, and I'm wondering if that was an update or some such that's now made the software decree that if it doesn't have the 512 it thinks it should have, the 3d functions won't happen. I don't know if it's a consequence of the larger quantity of pixels being pushed, or if it's the video card getting too old to support CC at such a high resolution now, but some help would be amazing.

Windows 7, 64 bit. I haven't been able to replicate the error, but I have the new drivers as well. I hope this just ends up being a fluke.

I need more than the maximum allowed 30 profiles - how do I change this?

I need more than the maximum allowed 30 profiles - how do I change this? Once I reach 30 profiles and I try to add one - it just deletes one automatically thus only allowing a maximum of 30. Please help.

You are talking about 30 Firefox Profiles on the same Windows Logon User Account?
I never saw that as a limit myself. I had 53 Profiles at one time, although I haven't done that since Firefox 3.0. It was causing an extended launch time and I started using "remote" Profiles that weren't controlled by the Profile Manager and weren't in the '''profiles.ini''' file; launched by command line. Like this in the Target line for the desktop shortcut: <br />
''' "C:\Program Files\Firefox_4.0_zip\firefox.exe" -Profile D:\Mozilla\Active-Profiles\4.0_10-15-10-N '''

NEED more than 15 menu item in Context Menu ????

Hi,
I really need to have more than 15 menu item displayed on Context Menu. I desperately need some workaround or ideas to achieve this
My client has invested thousands of dollar in Flex Project, he definitely need more than 15 menu item.If this project failed , client will NEVER think to invest in flex.
Had I been aware of this limitation before I would have thought some solution by now.This comes as a surprise to me at the last moment ,just fews days before Prod Date.
I cant also user java Scrip heck as my Flex application is running inside Dot net Container , I do not access to the luxury of java script
Pls gents help me get rid of this ...PLEASE provide some ideas.
Thanks in advance.
Thanks,
Dharmendra

Thanks Natasha,
I got your point but as for as I know grouping like Quality is not possibel in Flax Context menu. I also cant go for window style menu(file,edit) because I need them to be displyed on DataGrid right clk . I am designing a trade datagrid where in trader can see all trades and he can approve/reject etc by just right clk and selcting proper menu item form Context Menu.
In case of window style (acrobat.com) menu trader will have to reach to menu instead of getting all options on mouse right clk
I will have to think other alternative wich provides same ease as cotext menu.(God knows what is that )
Once again thanks for suggestion.
Regards,
Dharmendra

How do I add more than 5 phone numbers and two emails to a contact in Thunderbird address book?

I have just started using TB 31.4 and am planning to move contacts (about 1400 from Outlook) into the TB Address Book. Many of my contacts have multiple email addresses, more than five telephone numbers, and more than two street addresses.
In doing a small import test I noticed that TB only has space for five telephone numbers and two email addresses, two street addresses. Is there a way to add more so that I do not lose this data on the import?
Is there a way to rename telephone number fields (as almost no one has a pager anymore)?
Can you create a third street address location?
I understand the use of custom fields but that seems less than satisfactory method.

There is an addon called 'MorefunctionsForAddressBook'. See link below.
* https://freeshell.de/~kaosmos/morecols-en.html
scroll down to the bottom to see the download link, which looks like this;
'''Download MoreFunctionsForAddressBook - 0.7.1 version (TB 3.0 or higher)'''
Download .xpi file to desktop or downloads file.
'''How to install addon:'''
In Thunderbird
* 'Tools' > 'Add-ons' OR 'Menu Icon' > 'Add-ons'
* Click on the gear wheel icon and select 'Install addon from file'
* locate the addon .xpi file you downloaded and click on 'Open'.
* Once installed it will appear in the list of Addon Extensions.
* You will need to restart Thunderbird.
This addon offers more fields etc and much more eg; importing etc.

Need more than 90 minutes of continual video

,Need more than 90 minutes of continual video? Hi all,
I'm using the Vado HD [first gen] as a "hidden cam" type of thing for a play that I am filming. I have 2 normal cameras set out in the audience, but I want to mount the Vado HD above the stage for a bird's eye view of a sword fight scene that I can cut to when editing footage. The problem is that the fight scene happens near the end of the play and there are no intermissions.
Since the filesystem used on the Vado HD is FAT and not NTFS or HFS+, I run into the 4GB limit and the camera simply puts itself to sleep about 45 minutes into recording even though there is more space on the dri've and the battery is fine.
Can I reformat the Vado HD with HFS+ or NTFS? [i use a Mac but can run windows via VMware Fusion if need be]. Is there any way to squeeze 90 minutes of video in one file on this camera? If I reformat the camera, will it mess it up? [i don't use any of the apps that were installed on the camera - i moved them from the vid camera to my laptop actually, so i don't care about losing anything valuable on the vid camera].
Thanks for any tips you might have!
/vjl/

Could the reason be that you are capturing to an FAT32 format hard drive and it is only allowing you a limited maximum file size? Not sure but I think it is 4GB which would equate to 1/3 of a DV 13GB hour ...or about 20 minutes.
If that is correct, and you should be able to tell because the capture window will display the file size limit as space available during capture, you could do one of two things:
* reformat the drive as NTFS which removes the file size limitation (I have just done this on an external drive for exactly the same reason), but do look up online instructions for this and do it carefully.
* if the material is not long continuous shots of over 20 minutes, switch on Scene Detect during capture; it's wise to cut material up into smaller chunks in any case as huge files become very unwieldy and handling them could slow your machine right down.

More than 1 Priv IPs and 1 VIP in 10gr2 RAC installations

With 10gr2 clusterware, is it possible to add more than 1 Prv IP and VIP ?
If possible, what is the procedure to add?
Thank you.

Is it possible what you really want to be looking for is NIC bonding / teamed NICs (or MPIP solaris).
This is where two ethernet adapters share an ip address
Take a look at the following post Re: teamed NICs for RAC interconnect for instance. (which refers to metalink Metalink note 298891.1 ).
Having said that I cant see a need for more than one priv IP, but multpile VIP's might jsut be wanted for eg DMZ. (I dont know the answer to that offahnd though).
rgds - bigdelboy.

Inbound interface found more than once for outbound interface

Hello everybody,
i have a simple problem.
I build a interface with XI3.0
File to idoc
for each file i need crate 2 idoc.
It's not a problem when Idoc type is different, but in my case i need crate 2 idoc of same type but with a different mapping.
so when i upload the file i have this error:
Inbound interface found more than once for outbound interface
how can i solve this problem? can i force this step?
i thought to create a different idoc type or create the 2 idoc in same mapping , but there is not my favourite solution because in case of error , both idoc will be not created.
any suggestion?
thanks in advance
alex

Hi,
Instead of exporting and changing the occurrence as suggested by Ravi,
use the same Idoc twice in mapping as well as Interface mapping.
Coming to ID part, do every thing as usual.
The only thing to note is instead of using normal Interface determination, use extended Interface Determination.
This will solve your problem. The error will not come again. I'm sure.
Try out and update the thread.
Regards,
Jeevan.

Need more than 2 states for MSO and rotation to work correct?

Similar Messages

Maybe you are looking for