NEED mySAP CRM 5.1 and 5.2 Version Help file-Urgent

Hi
Can any body please send me the new version in mySAP CRM 5.2 help file or any other source.
positive reply will be appreciated and rewarded.
Thanks & Regards
Vikram Gopal
my personel email Id : <removed by SAP Community Network Moderator>

Hello Vikram Gopal,
please avoid Document requests by E-Mail. Unfortunately neither the Help http://help.sap.com/ or the Releasenotes http://service.sap.com/releasenotes for CRM 5.2 are avaliable.
Best Regards,
Gregor Wolf
SAP Community Network Moderator

Similar Messages

How can I change the password in the iBook donated to our nonprofit. No password was given with the iBook? We need to put in printer and other software. Help, we can use the laptop without changing the password.

How can we change the password in the iBook donated to our nonprofit? No password was given with the iBook and every time we try to install items, the password window pops up. We need to put in printer and other software. Help! We can use the laptop without changing the password.

If you did not get an OS X install-restore DVD with the computer you may need
to buy one from somewhere, and you may be lucky to get a retail OS X 10.5.x
version. The original grey-label install set of software and OS X it shipped with
likely would be an older system than Leopard 10.5. Last versions of G4 Mac, &
G5, shipped with a Tiger 10.4 system; so did early Intel-based Mac. Grey discs
which accompanied other computer build models generally do not interchange.
The last OS X version a PowerPC architecture can use, if supported, is 10.5.8.
A PPC processor at 867MHz & faster should be able to run OS X 10.5 Leopard.
{With the correct disc installer, you can use it to change a password and other
things including re-install, and perform disk utility functions, etc.}
There is a chance you may be able to get a white-label Replacement 10.4 DVD
or Replacement 10.5 DVD from AppleCare or the online Apple Store (800myapple)
from a Mac OS X system specialist; these have been available yet hard to get
as not all persons involved with them seem to know if they still exist until someone
is asking. These aren't retail stock, are special discs for computers who could use
a system later than original old discs; these are complete install discs not for one
specific series of Mac. Generally they'd work in supported PowerPC G4/G5; but
do not replace specialized original install DVD, such as an early Intel mac requires.
You'd need to have a serial number of the computer, and a method of payment
when seeking some replacement system media from Applecare or Apple sales
and these discs are not available in a retail store. The original Retail discs are
labeled differently and shipped in a retail box with a big X on the front. Other
sources for retail 10.4 Tiger or 10.5 Leopard may be online via amazon sellers
or computer resellers who handle repaired Macs. Avoid mystery grey label ones
that were intended to be sold and kept with their original computer kits.
Good luck!

I need to press F1 and call a executable help file

Hi everyone, how do i listen to a f1 key pressed event and call another executable help file (help.hlp). I've got an application based on swing. Thanks for your help !

Well I do not use a hlp file, but I open an html document and go to a target via F1. See about setHelpContext, and de.must.util.help at http://www.must.de/Jacompe.htm

Difference between CRM 5.0 and 4.0 version.

Hello Experts,
Please let me know the exacat difference between CRM 5.0 version and 4.0 version.
Please let me know.
Thanks

Hi Koti,
There are some significant differences between CRM 4.0 and CRM 5.0.
1. IC Web : Locking and Handling of entities should be handled explicitly in CRM
                  4.0 where as the same is handled implicitly in CRM 5.0.
2. In 4.0 most of the Std Classes can be inherited but in 5.0 most of the Std
   Classes cannot be inherited as they are made as Final Classes.
3. CRM 5.0 and 5.1 so on.... versions have introduced CRM specific User Interface which is very flexible and simplified as you can jus drag and drop the objects for creation of custom application.
Thanks
Siva

How do I generate a Word document and a PDF from Help files?

Hi,
I am new to RoboHelp HTML, and am using version 8. I updated some Help files, and now I want to generate output. Here are my questions/ or the process I used:
To compile the help, I clicked Generate Primary Layout. Is this correct? I noticed that the date stamp on the xpj file has not changed. The date is still from many months ago. (Why is that? Should it show a recent update date?) However, the files that I updated do reflect the dates when I made the updates. These include art files, an hhp, and htm, js, ldb, pss, cpd files.
To generate a pdf, I clicked Generate PDF. I was not able to generate the PDF at first, but then, I enabled macros in Word 2007 (Trust Center Settings > Enable all macros...and clicked the checkbox, Trust access to the VBA project object model), and clicked Generate PDF. At the end of the generation, I got this error in Word: Microsoft Office Word has encountered a problem and needs to close. We are sorry for the inconvenience. The info you were working on might be lost. Word can try to recover it for you. I closed the dialog and Word generated several blank documents. Microsoft Office Diagnostics was run and found one problem and corrected it. Despite the error message, a pdf was generated. (If you could give me any insight on why I got the error messages, that could be helpful to know).
How do I generate a Word document?
Thank you!
Erin

Welcome to our community
Note that RoboHelp is capable of creating a variety of layouts. WebHelp, FlashHelp, AIR Help, Microsoft HTML Help, JavaHelp, Oracle Help, ePub and more.
Any of these layouts may be nominated as the Primary layout. So when you generate the Primary layout, you get whatever has been configured as the Primary layout.
Only certain actions will result in a change to the .XPJ file. The actions are indicative of major changes to the project. So I wouldn't fret the fact that the date time stamp wasn't updated.
Indeed the Printed Documentation Single Source Layout recipe is what you use to create PDF. Generally what happens is that RoboHelp creates a Microsoft Word document as an intermediate file type, then creates the PDF from that. As you might imagine, there are a host of things that can go wrong during the process. I might suggest that you first get a Word document to generate cleanly. Then once you do that, focus on PDF. I know that I typically gen a Word document and stop there. I just open Word and use Word to create the PDF.
If you look at the properties for the Printed Documentation Single Source Layout recipe (View > Pods > Single Source Layouts then right-click the Printed Documentation layout and choose Properties) you will see that PDF, Word or both are options at the top of the dialog.
Hopefully that gives you a nudge in the right direction.
My fellow Adobe Community Expert Peter Grainge has excellent info on Printed Documentation on his site at Grainge.org. Click the link below for that.
Click here to visit Peter's site
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

WSUS 4.0, SQL server, and SCCM 2012 version help

I am trying to get to the bottom of a version question.
We currently have SCCM 2012 R2 up and running, with a DB on a separate server version MSQL 2008 R2. Now we also are using the WSUS integration. I am being told WSUS 4.0 cannot be ran on SQL server 2008 R2, so they could only install and use WSUS version
3.0.
Can anyone out there please shed some light on my version items from above?
Thank you

I am being told WSUS 4.0 cannot be ran on SQL server 2008 R2, so they could only install and use WSUS version 3.0.
(Pedantically speaking this is true because there is no such beast as "WSUS 4".)
However, WSUS v6.2 (Windows Server 2012) and WSUS v6.3 (Windows Server 2012 R2) can most certainly be installed on SQL Server 2008 R2, and the official documentation is at
http://technet.microsoft.com/en-us/library/hh852344.aspx
However, the *preferred* installation methodology, unless you've expressly chosen to use a remote SQL Server, is to use the Windows Internal Database feature which is built into Windows Server 2012 and 2012 R2.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

No visible cursor, and question about the help-file

Right now I am using a temporary computer, as mine is being re-formated.
When I opened Illustrator to change a text-line in a picture, there was no cursor when I clicked on a word. I could still make my change, but no blinking cursor to tell me where I was. Can somebody please tell me where that setting is? It feels like I am working blind...
I looked for this in the help-file, and while doing that (and not finding the answer), I wondered, as so many times before, how they thought at Adobe when they constructed the help-file as it is now... If I open the help-file in Illustrator, select that I want an answer for Illustrator (the icon to the right of the search-box) WHY do I get answers for InDesign, Bridge and other programs???? WHY not just for Illustrator? I am NOT interested in those programs right now, I want an answer for Illustrator. Please tell me there's a setting or something to fix this, because this drives me crazy each time I want help with something.
Lena
Sweden

Thanks for your answer. For some strange reason the problem is now fixed... I checked the second box in Settings/General that says something like "use exact cursors", restarted the program and no change. Then I went for a coffee break and now it works
So how do I download the pdf help-file?
Lena

Urgent help needed - RE: 10.4.6 and dvd's/cd's files disappearing

Hi all,
I've just upgraded to 10.4.6 on my Powerbook 1.5gHz, 2gb Ram laptop (PPC).
When I insert a dvd or cd I click on a file and then it just disappears, and sometimes you cannot copy to the desktop either.
Has anyone heard of this before and can recommend a solution asap?
This never happened on 10.4.3, and I did the 10.4.6 combo update to 10.4.6.
Please, please, please help me, as I can't open, copy or read my files on my dvd's. :'(
I don't know what to do!
Ash

Hi m8,
They are checked by default, and I've repaired permissions numerous times and restarted, yet still the same problem.
I believe this to be a 10.4.6 issues, as everything was fine in 10.4.3.
I had to upgrade due to some applications requesting the need for 10.4.6.
I hope someone out there can help me, as I've read numerous threads in the support, trashed plists for the finder and sidebar and such, but nothing works.
Cheers
Ash

HT5037 It doesn't work for me. Anyone got any suggestions? Just gets into a loop where I upgrade and then launch and it says I need to download the upgrader and upgrade again. Help!!

I want to open some old iphoto libraries. The new iphoto says I have to upgrade the library, so I downloaded the upgrader and ran it on the library I wanted to upgrade and still it would not open, just kept giving me the same error message about needing to upgrade the library!! How can I open that old library file?

Did you go to Applications/Utilities and find the upgrader app and then double click it?

I need to capture streaming audio and save to a wav file

I need to be able to capture an audio stream delivered via ethernet using UDP protocol and then save to a wav file.
I currently can capture the data stream but do not know how to format the data to save it to a file. Our format is 16KS/s, 16bit, PCM, no compression.

Did you do the thing about searching in the example database. Let us use that as base for discussion. Those who put in some effort will be rewarded. Also check out the AU file format http://en.wikipedia.org/wiki/Au_file_format As it is big-endian http://en.wikipedia.org/wiki/Big-endian the numbers can be stored as is in Labview. Must players,matlab, etc can use the AU file format.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

A dialog box tells me i already have firefox running i must close this and or restart computer this is annoying can this be fixed or am i needing better instruction for opening and closing firefox sessions help............

i have close firefox and tried to log on again i get a box saying firefox is already running, i must close this session before i can log on again confused i don't see the program running in the task manager confused again says i must restart computer in order to log on again. i close firefox by accident seems like this could be resolved easier. vs. restarting computer confused help shows something like firefox exe. confused

Try to run the Firefox program once as Administrator (right-click: Run as Administrator).
If that doesn't solve the problem then remove the Firefox program folder to do a clean reinstall.
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Excel sumifs and the powerpivot version help please

very new to power pivot, can you help please?
In an excel table I was able to do the following...
=SUMIFS([GWP],[Date],[@Date],[PolType],[@PolType])
I have 60k rows where the above totals all GWP where the date & policy type match the individual record. This in effect gives a subtotal, per date per policy type rather than doing it in a pivot table. This works
nicely however it takes for ages to update, and calculate, also has issues when I then need to pivot table it.
As a result I'm trying to use powerpivot, as I understand it is better at dealing with these big calculations, I've tried the calculate formula, but I cannot understand how to have a rolling criteria in the field. Like I can in my sumifs.
Thank you in advance for your help
Mathew

To duplicate your original SUMIF as a Calculated Column in PowerPivot you could use one of the following:
Using EARLIER():
=CALCULATE(
SUM(Table1[GWP]),
FILTER(
Table1,
Table1[Date] = EARLIER(Table1[Date]) &&
Table1[PolType] = EARLIER(Table1[PolType])
Using ALLEXCEPT:
=CALCULATE(
SUM(Table1[GWP]),
ALLEXCEPT(
Table1,
Table1[Date],
Table1[PolType]
Both should produce the same result as a Calculated Column.
The second version with ALLEXCEPT() should also work a Measure/Calculated Field:
ALLEXCEPT Measure:=
CALCULATE(
SUM(Table1[GWP]),
ALLEXCEPT(
Table1,
Table1[Date],
Table1[PolType]
The advantage of the measure is that it should return the expected result in a pivot and filtering dynamically.
Your final measure would then be:
Percent GWP:=
SUM(Table1[GWP])/[ALLEXCEPT Measure]
In all examples, replace 'Table1' with your actual table name in Power Pivot.

Need to build a central TOC for ~75 html help files

I'm using RH8 for HTML. A year ago, I took our 75 Winhelp projects and converted them to 75 HTML projects in order to be compatible with Windows 7. in Winhelp, the user selects Help and gets a central TOC from which to select the help for the individual project they want. Now that we want to install the HTML, we need something similar. we are not set up to have context sensitive help (it's not a browser interface). How do I create a TOC as a separate HTML project from which all of the other projects can be called?

Best practices? That's all a ToC really is at heart anyway - a bunch of hyperlinks ;>)
You could build yourself a nice big parent/child merged projects scenario if you want the pain...

Plug ins and rosetta from the help file

does anyone know how to get safari to open with rosetta - to use plug ins better?
I follow the instructions but cannot find the rosetta check box anywhere - screen shot helpful
could it be my imac 1.9 G5 PPC doesn't have rosetta?

thanks
I'm trying to watch tv (live football) on my imac G5 and Safari is struggling with some of the pages. Can't download IE anymore and so I need to be able to find the required plug-ins to watch. for example: Safari can’t open “tvants://www.tvants.com/tvants/?k=b098b8443c47b932”
also plug-ins required are a common error message.
I think this technology may only work with PC's - a shame
appreciate any help - have had a mac for years (since my Amiga became a relic!)

Bought Photoshop CS5 Standard and Received Extended Version - Help

Hi.
I need help/advice. I purchased the full version of Photoshop CS5 for Windows. I made it a point to not get the extended version as I thought it was built for only 64bit sytems and I have 32bit. Today I received the extended version. What should I do? Will this work on my sysyem? I have Win XP, SP3 installed, 3.0Mhz processor and 4GB memory.What advantages/disadvatages will there be if I can use this version?
Also, why is it that the Extended version seems to be cheaper than the regular version?
Thanks for any help.
Norm

Also, why is it that the Extended version seems to be cheaper than the regular version?
From reputable resellers, the extended version should be more expensive because it includes additional features.
As already stated - extended runs on all the same computers as the standard version.
To use the 3D features in extended you may need a better video card.

NEED mySAP CRM 5.1 and 5.2 Version Help file-Urgent

Similar Messages

Maybe you are looking for