Need Netweaver Architecture Guide ! ASAP

Hi all,
I am new to SAP BASIS. Could anyone provide me with Netweaver Architecture Guide or any links to this specific topic so that I could understand the NW Architecture.
I am looking forward for this .
Thanks & Regards,
Sanjeev Kumar.

Hi,
I would suggest three sources;
SAP NetWeaver master guide: can be downloaded from service.sap.com/instguides --> SAP NetWeaver --> SAP NetWeaver 7.0 --> installation --> planning.
SAP NetWeaver help: help.sap.com
SAP NetWeaver developers guide: you can find this on the link of the SDN home page.
Cheers,
Mike.

Similar Messages

Need architecture guide to deploy OSB & OBPM with SOA?

Hi ,
Is there architecture guide available for OSB + OBMP with SOA?
Thanks & Regards,
Noman

Hi:
The one I know is http://download.oracle.com/docs/cd/E14571_01/core.1111/e12036/overview.htm#sthref10
Now in 11.1.1.3 u can have SOA, BPM and OSB within the same Weblogic Domain, so the diagrams that u will find in the link can be extended with one additional Managed Server depicting OSB.
BPM is on top of the SOA Infra, so u already have it there,
hope that helps
best

Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file...Now I've got a new iPad and need the User Guide which is only available inPDF

Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file using Safari...Now I've got a new iPad and need the User Guide which is only available in PDF and FireFox will not work.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Need best Architecture design for the following scenario

Hi Experts,
I need best architecture design for the following scenario:
Sender: Mail
Receiver: if sender body contain u201DApproveu201D, then call SOAP adapter, If SOAP adapter execute successfully, then send Mail(SOAP adapter executed successfully) and SMS . So receiver is SOAP, Mail and SMS.
My current approach issue:
Three message mapping:
Mapping1: mail to SOAP
Mapping2: mail to Mail
Mapping3: mail to SMS
In interface determinant>u201DSelect all three operation mappingu201D> u201Cselect order at runtimeu201D.
Issue in current approach: For me first SOAP adapter should complete successfully, after that only my Mail and SMS operation mapping should execute:
But problem is before success of SOAP adapter engine, Mail and SMS mapping completed or integration engine executed.
Note: There is possible to fail the SOAP request in adapter engine.
Kindly help me --> u201CAm I going correct way or want to change the architectureu201D?
Thanks for advance!!
Regards, Kumar

What do you mean by successful execution of soap call? Are you talking about Successful response (happy flow) from the soap call instead of application error ? Then based on the response you want to decide sending mail and sms. How big call is your soap ? If your soap interface is very simple I can give the other possible way.
Sender sends the message, use mapping to read the content and then do soap call in the mapping itself and after seeing the soap response decide about two receivers (mail and SMS). If your soap call is very simple one, you can go for it. Otherwise I would not recommend this. The reason is you loose some visibility regards to monitoring during soap call in the mapping.
Other option is go for CCBPM. Here you receive the message, use send step to soap interface which is sync step. Then after seeing the response create another block with fork steps each for two senders mail and sms. If response bad then dont proceed or execute the next block. Simply use exeception or control step to jump out from the block,

HT1212 my phone froze so i locked it. tried opening it, the screen wont even light up. what's up? i need to use it asap.

i just recently replaced the simcard to my personal simcard earlier. after e few hours of usage (messaging, facebook, twitter, instagram and viber) it slwoed down until it hung up. i locked the screen to see if that helps since it usually did with my ipod touch 4th gen. i tried pressing the sleep button again to find out it no longer lights up. it was still 50% charged so it can't be the battery. i connected it to the charger and it only makes the usual beeping sound when you plug the device to its charger. what should i do? i need it for work asap. and i have no back up phone or simcard.

slowed*

My outlook will not open yet all other microsoft packages will. When I click on the icon, the 'o' logo will come up for a split second but will not open the package - need to receive emails asap!

My outlook will not open yet all other microsoft packages will. When I click on the icon, the 'o' logo will come up for a split second but will not open the package - need to receive emails asap!

You're very welcome!
I meant holding the "option" (or "alt") key on your keyboard as you click the Outlook icon on the Dock, and continuing to hold it until you see the Microsoft Database Utility come up. Alternatively, you can open the utility by navigating to Applications/Microsoft Office 2011/Office and then double-clicking the Microsoft Database Utility app.
When you rebuild your database using that program, a backup copy of your original database (containing your account info, contacts, mail, calendars, etc) will be created. As a security precaution, you should also ensure you have a backup of your database (which you can find by going to Documents/Microsoft User Data/Office 2011 Identities/ and copying the contents of that folder onto an external drive).

Can FCS be set up in multiple offices - Would that be one database or can we synchronize several - I need general architecture concept

Can FCS be set up in multiple offices/locations - Would that be one database or can we synchronize several databases - I need general architecture concept

If you want to link to separated location which are too far from each other to connect via Ethernet or FC you can't. What you can do is build another FCS with a completely independent DB and link both with XML and scripting (or if you have a very good DB knowledge). Other than that you can put the FCS DB in one location and make the clients on the other connect to the first one. But if the issue is to ingest media from both locations to the same DB then you better have a nice and big Ethernet connection between both locations.
Hope this help

What is life cycle management in netweaver architecture

hi all,
I am new to sap can any one help me by sending me links on life cycle management in NetWeaver architecture.

http://www.sap.com/platform/netweaver/pdf/BWP_SB_Unified_Lifecycle_Management.pdf
http://www.sap.com/solutions/business-suite/plm/pdf/BWP_Life_Cycle_Process_Support.pdf
http://www.filetek.com/software/product_sheets/datasheet_SAP.pdf

Overview NetWeaver architecture

Hi!
I would like to have a short overview presentation of the NetWeaver architecture. It should be just an overview and it should be used by a non familiar SAP person (it should not be too technical). Including stuff like:
- The client/server architecture
- The hardware prerequisites
- The use of application servers and how its done
- Different client techniques and device that can be used/connected
- Integration platforms
Im looking for a eLearning course or an presentation (ppt). I have tried to find something on the SDN but have not been lucky yet. It should not be just a slide of the architecture, it should be a presentation that explain the architecture.
Does this kind of overview presentation exists?
I would be really glad if someone had any idea or advice to give.
Thanks in advance
Fredrik

These e-learning courses look like a match:
http://www.sap.com/usa/services/education/catalog/usacourse.epx?context=%5B%5BSSO_AIT_E_NA%7CTERP02%7C%7C%7C%7CUS%5D%5D%7C
http://www.sap.com/usa/services/education/catalog/elearning/usacourse.epx?context=%5b%5b%7cNW100%7c%7c%7c082%7cUS%5d%5d%7c
Regards,
Slava

FormsCentral retiring in July???!!! Are you freaking kidding me? My clients use this feature all the time. What do you suggest I do now? What service do I go with that is comparable to it? I need help with this asap!

FormsCentral retiring in July???!!! Are you freaking kidding me? My clients use this feature all the time. What do you suggest I do now? What service do I go with that is comparable to it? I need help with this asap!

I would suggest checking out http://www.logiforms.com. They have really good PDF support for both hosted PDF's and generating PDFs. You can:
populate PDF forms from a web form submission
Merge multiple PDF's together using conditional logic
Include uploaded images in the generated PDF
Get Electronic signatures on PDF's
Use conditional logic when creating PDF's
Convert HTML to PDF. You design in HTML and CSS and use form field wildcards and generate the PDF
More of the PDF features are explained here:
PDF Form Creator | PDF Form Maker | V3.Logiforms.com
They are also offering a 25% discount to anyone coming from Forms Central...

Netweaver Developers Guide

Hi,
is there a option to download the Netweaver Developers Guide as a PDF File ?
Thanks
Ingo Hilgefort

Hi,
you can download or order the SAP NetWeaver Library. for offline use. The library contains most of the information linked to from the Developer's Guide in SDN. You can find the information in this section:
http://help.sap.com/saphelp_nw2004s/helpdata/en/8b/0b674240449c60e10000000a1550b0/frameset.htm
As a customer you can download the SAP NetWeaver Library directly in the Software Download Center of the SAP Support Portal (http://service.sap.com/swdc) by searching for the Library via its material number. Alternatively you can order a copy in the SAP Knowledge Shop. (http://www.sap.com/company/shop).
best regards
Carsten

Very frustrated. downloaded reader but when I try to download pop up box says I have to accept end user license agreement but there is no place to accept it at. I need to download pdf asap for my business. Please help.

very frustrated. downloaded reader but when I try to download pop up box says I have to accept end user license agreement but there is no place to accept it at. I need to download pdf asap for my business. Please help.

Hi Pat. I've done that, it opens up the install window again. If I click on install it says it's already installed. Nothing comes up that allows me to accept the end user agreement. I just retried and the same thing happens.
I appreciate your help.
Shelley

New SAP EIM Solution Architecture Guide

A brand new SAP EIM Solution Architecture guide provides a valuable insight into how SAP EIM portfolio can be leveraged in the context of Business Intelligence. The guide proposes typical deployment patterns based on best practices and real-world project experiences for your EIM strategy. Providing a comprehensive view on how to leverage and deploy SAP EIM solutions to support your analytics and business intelligence strategy, the architecture shows how to incrementally execute this strategy along a clear growth path, realizing added value along every step.
Click the link above to access the new site and go through the presentation.
http://www.sdn.sap.com/irj/sdn/eim-solution-architecture

Dear Mohan,
SAP Custom Development offers a comprehensive range of flexible development-related services. We execute custom development projects that fit exactly your specific requirements but are not transferred to the SAP standard solution. If you have such requirements, please contact your SAP Sales Representative, Consultant, Customer Engagement Manager or Account Manager (whichever applies for you) who will then be able to assist you in initiating contact with our team.
For more information go to website at:
www.sap.com/services/customdev
If you consider filing a development request, we recommend that you either contact your Customer Competence Center (CCC) or one of the User Groups to place a stronger emphasis on your request. A list of SAP User Groups is available at http://service.sap.com/communities.
For more information, see http://service.sap.com/rollin.
Regards,
Rakesh

Need EJB architecture diagram

dear friends,
I need EJB architectural diagram and if possible give me explanation also.
thanks & regards,
siva

hi JavaDammGud,
Thanks for ur help. i am new to EJB's . Now i found the way to move on EJB's. I searched with some key words. but i didnt understood the topics they given.
thanking you,
bye,....
regards,
siva

My i phone's not working. it said no service. is it the At and t or my phone. i need to use it asap.

My iphone's said no sevice. I'm worried. Is it the AT nT or my cellphone's not working need to use it asap. What should i do?

No Service is usually a reception issue, possibly your carrier ATT is not sending signal, your SIM Card is not functioning, or the iPhone antenna is not working. You can check with ATT, you can check with ATT and get a new SIM Card, or you can trouble shoot the iPhone.
On iPhone tap Settings App>General>Reset near bottom>Reset Network Settings.
Last Resort to rule out Software Problem would be to Restore iPhone Firmware with iTunes.
Hardware would be the copper pin at the "Do Not Remove Sticker" needs to be in contact with the Case Metal Ring (Bezel). Antenna ring is screwed down on top of Bezel at Dock.

Need Netweaver Architecture Guide ! ASAP

Similar Messages

Maybe you are looking for