Need Network Printing support for the Deskjet 6500 series as a shared printer!!!

Why does HP NOT SUPPORT INSTALLING the Deskjet6500 series as a shared network printer on Win 7 64 bit?? There is NO DRIVER available and if its NOT USB DIRECT CONNECTED windows update will NOT FIND a driver either!!!
This is stupid!!

Hi,
It's a network printer (depending on how you set it up) and you can find drivers for Windows 7 64bit from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3795...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

URL Not Found for the officejet 6500 series

This is the error message I get when I attemp to download the HP Officejet Full Feature Software and Driver: Not FoundThe requested URL /pub/softlib/software12/COL31304/mp-110035-2/OJ_AIO_6500_E709_Full_Win_WW_140_408-4.exe was not found on this server. This is the link address:http://ftp.hp.com/pub/softlib/software12/COL31304/mp-110035-2/OJ_AIO_6500_E709_Full_Win_WW_140_408-4.exe Any ideas as to how to get this download file? Thanks.

Hi there, Unforunatly you dont tell us what OS you are using so I took a guess at Windows 8 or 8.1 Try this link http://ftp.hp.com/pub/softlib/software13/COL31304/mp-110035-3/OJ_AIO_6500_E709_Full_Win_WW_140_408-5.exe

We need IOS 4.0 for the ipod touch 1st generation not everybody have money to get a new version of ipod touch to used the most important social networks ... please think about it and i would grateful if i can use my old ipod touch .. Thanks :)

We need IOS 4.0 for the ipod touch 1st generation not everybody have money to get a new version of ipod touch to used the most important social networks ... please think about it and i would grateful if i can use my old ipod touch .. Thanks

Sorry, the fellow users in the forum hae no way of making that happen. The maximum iOS for a 1st generation unit is 3.1.3
Stedman.

How can I get a printer driver for the hp psc 2410 photosmart?

When I tried toadd the printer, there was a message saying that the printer driver for the 2400 series was available, but when I tried to download it, I received an error message saying that I couldn't download it because of a network error. My Macbook is not on a network at the moment. How can I get the driver so I can print?

You can also install this update directly (not through app store):
http://support.apple.com/kb/dl907
If you want us to help more, you will need to give us more detailed info. "It didn't work" leaves me wondering exactly what you've done so far.
For example, after clicking Add/+ and selecting the printer you want, have you waited for a full minute for the Mac to find the driver
- OR -
when it starts searching for driver, have you tried going to the pull-down menu where it says "Use: Auto-select," and choosing "Select Printer Software..." to make a manual selection?

Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

Team , Thanks for looking into this ..
As a last resort on optimizing my stored procedure ( Below ) i wanted to create a Selective XML index ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
Index feature is not supported for the current database version.. How ever
EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
Is there ANY alternative way i can optimize below stored proc ?
Thanks in advance for your response(s) !
/****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- EXEC [dbo].[MN_Process_DDLSchema_Changes]
ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
AS
BEGIN
SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
select getdate() as getdate_0
DECLARE @XML XML , @Prev_Insertion_time DATETIME
-- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
-- PRINT '1'
CREATE TABLE #Temp
EventName VARCHAR(100),
Time_Stamp_EE DATETIME,
ObjectName VARCHAR(100),
ObjectType VARCHAR(100),
DbName VARCHAR(100),
ddl_Phase VARCHAR(50),
ClientAppName VARCHAR(2000),
ClientHostName VARCHAR(100),
server_instance_name VARCHAR(100),
ServerPrincipalName VARCHAR(100),
nt_username varchar(100),
SqlText NVARCHAR(MAX)
CREATE TABLE #XML_Hold
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
BufferXml XML
select getdate() as getdate_01
INSERT INTO #XML_Hold (BufferXml)
SELECT
CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
FROM sys.dm_xe_session_targets xet
INNER JOIN sys.dm_xe_sessions xes
ON xes.address = xet.event_session_address
WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
--RETURN
--SELECT * FROM #XML_Hold
select getdate() as getdate_1
-- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
FOR
PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
--RETURN
--CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
--SELECT GETDATE() AS GETDATE_2
-- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
--CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
--USING XML INDEX [IX_XML_Hold]
---- FOR VALUE
-- --FOR PROPERTY
-- FOR PATH
--SELECT GETDATE() AS GETDATE_3
--PRINT '2'
-- RETURN
SELECT GETDATE() GETDATE_3
INSERT INTO #Temp
EventName ,
Time_Stamp_EE ,
ObjectName ,
ObjectType,
DbName ,
ddl_Phase ,
ClientAppName ,
ClientHostName,
server_instance_name,
nt_username,
ServerPrincipalName ,
SqlText
SELECT
p.q.value('@name[1]','varchar(100)') AS eventname,
p.q.value('@timestamp[1]','datetime') AS timestampvalue,
p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
FROM #XML_Hold
CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
SELECT GETDATE() GETDATE_4
-- SELECT * FROM #TEMP
-- SELECT COUNT(*) FROM #TEMP
-- SELECT GETDATE()
-- RETURN
-- PRINT '3'
--RETURN
INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
[UserName]
,[DbName]
,[ObjectName]
,[client_app_name]
,[ClientHostName]
,[ServerName]
,[SQL_TEXT]
,[EE_Time_Stamp]
,[Event_Name]
SELECT
CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
ELSE T.nt_username
END
,T.DbName
,T.objectname
,T.clientappname
,t.ClientHostName
,T.server_instance_name
,T.sqltext
,T.Time_Stamp_EE
,T.eventname
FROM
#TEMP T
/** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
-- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
WHERE ddl_Phase ='Commit'
AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
AND MN.[DbName] = T.DbName
AND MN.[Event_Name] = T.EventName
AND MN.[ObjectName]= T.ObjectName
AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
-- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
--SELECT GETDATE()
--PRINT '4'
--RETURN
SELECT
top 100
[EE_Time_Stamp]
,[ServerName]
,[DbName]
,[Event_Name]
,[ObjectName]
,[UserName]
,[SQL_TEXT]
,[client_app_name]
,[Created_Date]
,[ClientHostName]
FROM
[dbo].[MN_DDLSchema_Changes_log]
ORDER BY [EE_Time_Stamp] desc
-- select getdate()
-- ** DELETE EVENTS after logging into Physical table
-- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
-- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
-- SELECT @XML
SELECT GETDATE() GETDATE_5
END
GO
Rajkumar Yelugu

@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
   May 14 2014 18:34:29
   Copyright (c) Microsoft Corporation
   Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu

Can you please put me in touch with the support for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.

Can you please put me in touch with the support for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.
I have had to erase my disk since then with trouble with Apple Store not recognising my machine and the reload from Time Machine has given complications . Can you please cancel my trial and return my Trial money.

If you paid for what you used then it was not a trial.
Look thru the following links and use the chat option if required for your situation:
Cancel your membership or subscription | Creative Cloud
https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
https://forums.adobe.com/thread/1703848
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

How can I add or change the Network I'D for the TouchPad?

Most devices on a network have names for the device for one reason or another. This helps to distinguish between connected devices and the legitimacy thereof.
So far I have been unable to add a Network ID to this TouchPad.
With the Amazon Kindle Fire had seen the network ID as "My Phone" which I really wanted to change, and fast. Did manage to change it with an Android app called Fing, which allowed me to use a rather unorthodox network identification name.
Would like to find another network utility that can do the same for the HP TouchPad. Any ideas as to a utility, or a more manual method? Fing via the Kindle Fire shows no network ID for my TouchPad.
Post relates to: HP TouchPad (WiFi)
This question was solved.
View Solution.

Hello Xelkos,
What you're talking about is actually a feature of DHCP. When asking for an IP address, a client can send a hostname to the server so that it can be easily identified in a human-readable way.
By default, this is disabled on the TouchPad. To enable it, you're going to need to edit a text file on the device. There's lots of different ways to do this, so pick your favorite and then follow these insturctions.
Find /etc/dhclient.conf and open it
Find the line that starts with:
# send-hostname
Delete the "#" sign in front of the line and change the text inside the quotes. This text should be whatever you want your hostname to be:
send-hostname "TouchPad"
Once you've done that, save and close the file
Next, turn Wi-Fi off and then back on. You should now see your hostname show up on your Access Point / Router.
NOTE: Remember that in order to make these changes permanent, you must set the file system as read-write:
mount -o remount,rw /
You must also set it back to read-only when you're done:
mount -o remount,ro /

HT4623 I have an ipad3, iPhone3gs and iPhone5, my problem is my apple ID works all 3 devices but I need a second ID for the iPhone 5. How do I delete my ID and set up a new one for the iPhone5 but keeping my own apple ID for the iPad and iPhone 3GS

I have an ipad3, iPhone3gs and iPhone5, my problem is my apple ID works all 3 devices but I need a second ID for the iPhone 5. How do I delete my ID and set up a new one for the iPhone5 but keeping my own apple ID for the iPad and iPhone 3GS.

http://support.apple.com/kb/he37

Print program for the smartform for selecting the output type (email/fax)

Hi All,
Requirement :I have to create a print program for the smartform where the output type may be print out,email or fax ,so i need to put the condition for selecting the output type (like printout,email,fax).
can any body please let me know how to put the condition for selecting the desired output type ?
Thanks in advance
Rahul

Hi
It is not the output type that has to be changed
it is the MEDIUM which you have to change and configure
for printout medium is 1
for FAX medium is 2
for MAIL it is 7.
so instead of printout change the medium to 2 or 7 for the same output type and attach to the same driver program and smartform/form.
Reward points for useful Answers
Regards
Anji

SP1 to R2 Upgrade - The installed Version of SQL Server is not supported for the operational database

Hello,
Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
The prerequisites are failing and it is stating the following ;
Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
Data Warehouse SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
All other pre-upgrade tasks have been done.
Help appreciated!

I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
service can not be reached.
[10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:11]: Debug: :**************************************************
[10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
[10:29:11]: Error: :
[10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
[10:29:11]: Error: :
[10:29:11]: Debug: :**************************************************
[10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:33]: Debug: :**************************************************
So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
Let's hope this fixes your issue as well, Tubble.
Have a great day!

Implementing Single Sign-On support for the Oracle E-Business suite

Implement Single Sign-On support for the Oracle E-Business suite
I want implement Single Sign-On support for the Oracle E-Business suite.
Operationg System : linux/Solaris
Oracle E-Business suite : 11.5.10
Oracle Application Server : 10gAS(latest availble)
Type of integration : SSO and OID with 11i
No third party SSO or LDAP
Qusetions
1.If my SSO Server is down can i login to applications(11i) using normal mode(default login http://servername.xxxx.com:8000/).
2. Is it possible to have appilications (11i) in Linux/Solaris and 10gAS in windows.
Please answer...
NOTE:
I am following Oracle METALINK Doc.Id 233436.1 and 261914.1.
Thank you.
MARK

You couldn't login into server But You can use the following login
http://servername.xxxx.com:8000/AppsLocalLogin.jsp
For this you need to enable the Appslocallogin Profile option

Urgent: need to get support for ß, Ö special german characters

Hi I need to have support for this characters, how can I do this I saw I could do this on the client or directly on the database, the easiest way will be my way so if someone knows how to do this I wait for an answer.

Hello,
Why start a new post? I thought I was helping you in:
How to have dutch nls support in oracle 10g

Tether support for the Nikon D750 in lightroom 5

Will there be tether support for the Nikon D750 in Lightroom 5

You are absolutely correct Lightroom does not have tether support for the new Nikon D750. see the list of supported cameras.
Tethered camera support in Lightroom
Nikon need to provide the required sdk info for the camera to enable Adobe to work on adding tether support.

Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for the RAW files. I have DNG 8.7 but wondering if LR and PS will import direct soon Thanks for any advice

Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for the RAW files. I have DNG 8.7 but wondering if LR and PS will import direct soon Thanks for any advice

Support for the Nikon D750 was introduced in the latest version of LR 5.7 and ACR 8.7 on Novemder 18th 2014.
Further updates to LR 4 were stopped when LR 5 was released on June 9th 2013. No further updates for bug fixes and new camera support.
Nada, LR 4 will never support Nikon D750. The Nikon D750 was introduced into the market in September 2014 some 15 months after further development of LR 4 was discontinued.
You can use the Adobe DNG program (free download for the package) to convert the Nef (raw) files from your Nikon D750 to the Adobe DNG format which will permit you to import those into LR 4. This is the crutch provided by Adobe to allow for the processing of raw files with outdated versions of LR and ACR.
You can also update the ACR plugin for PS CS6 to version 8.7 which can also work with the raw files from the D750. For direct support in Lightroom you will need to upgrade (paid) to version 5.7.

802.11a network not supported for this Country Code

Hi, I get the following error whne enabling 802.11a network on a AIR-WLC2106-K9. Country is set to ID (Indonesia)
>config 802.11a enable network
802.11a network not supported for this Country Code
Yet, on a AIR-CT2504-K9, set to same country code there is no problem.
Is this a WLC model or version issue? WLC2106 is on version 6.0.199.4 while the CT2504 is 7.0.220.0
Andrew

Well is it the only country code selected? Also you might as well upgrade the 2106 to 7.0.x and move off the 6.0.x. Since your 2604 is at that code you might as well upgrade the 2106 and see. I'm guessing that you have the same APs and the APs are for that country.
Sent from Cisco Technical Support iPhone App

Need Network Printing support for the Deskjet 6500 series as a shared printer!!!

Similar Messages

Maybe you are looking for