Need new AC adapter for my Qosmio F10-124

Hi All,
I am a bit of a novice when it comes to this but can anyone tell me the product/part number of a suitable replacement AC power adaptor as mine has become faulty.
Any help welcome.

Do you know the Toshiba Options & Accessories website?
http://eu.computers.toshiba-europe.com -> Products -> Options and Accessories
There you can find all details about compatible products with your Qosmio F10

Similar Messages

  • Need new power adapter for Qosmio F50

    Hello
    I am in need of buying new power adapter for my Qosmio F50 126. The reason being if I try to run more demanding application on my computer, the entire computer just crashes, shuts down. I need to buy a new adapter before my entire computers crashes result in destroying my HDD. I am not sure if my battery are died or the power adapter fails to charge them up.
    The picture of underside of my power adapter is shown below.
    https://www.dropbox.com/s/qcrk4fl5bhftbzm/IMG_20131220_215821_454.jpg
    What I would like to know if the following two adapters are the same and would work with my model. I ask this because the price difference between the two units is significant., 20 USD. Also, I will be importing it from the USA using an agent here. Therefore I need to get it right on the first try.
    I'm curious about the connecter it has on the end. I wonder if its same as the one which came with the notebook. I believe it wont be an issue with it clearly says it supports my model, Qosmio F50 126
    Another find which I believe is the best and most compatiable.
    This one will sure work but the price is much higher than the one mentioned above
    Regards
    Abdusamed
    +Message was edited: link to onlineshops has been removed - advert+

    Hi
    You need an AC adaptor which supports *19V and 6.32A*
    The Ampere value might be a little bit different. This should not be a big problem but you have to ensure the Ampere value isnt too low. The notebook needs enough power to run properly and to charge the battery.
    However, the Volt value (19V) cannot be different. _It has to be *19V_*
    The original AC adaptor has the part number: *PA3290E-3AC3*
    I recommend you to purchase the AC adaptor recommended by Toshiba.

  • Need new laptop charger for my Qosmio G50

    I've got a Toshiba Qosmio G50 laptop that I bought quite a few years ago and the charger for it finally konked out on me from heavy use and bending of the cord.
    I've been trying to search for a charger for it with the same specifications as the one I currently have. I think the product number for it is PA3658E-1AC3B and it's specs are like 120W, 6.3A, 19V, 5.5mm/2.5mm.
    I have been unable to find a charger with these specs and when I search for other chargers with similar specs and so on, when lists of compatible laptops come up, my laptop is never in the list. Now I'm wondering if this is due to because the laptop is actually incompatible or due to the fact that it is rather quite old.
    Also, does anyone know what laptop chargers I could be able to use or specs for them. Like would a charger with these specs work for my laptop?
    Output: 19V 4.74A 90W
    DC Barrel Tip: 5.5 x 2.5mm
    Any and all help will be greatly appreciated. Thank you in advance.

    I dont know where do you live but go to eBay and there you will find proper charger. As far as I know you can use any charger that is offered for Qosmio G50.
    If you want to have original part for your model contact nearest Toshiba service provider in your country and order one.

  • I have a iMac its Bluetooth is not working. I need a Bluetooth Adapter for it. I am using Mac OSX 10.9

    I have a iMac (Not under warranty) its Bluetooth is not working. Blue tooth Hardware is failed and Replacement is huge cost,I need a Bluetooth Adapter for it. I am using Mac OSX 10.9

    Apple used to recommend this but now say it's not compatible.
    OWC have IOGear GBU421W6 Bluetooth 2.1 USB Micro Adapter   and IOGear GBU321 Bluetooth USB Adapter,  & should be able to confirm whether or not they'll work for you.

  • Troubles with the creation of New Custom Adapter for NW 7.1

    Hi guys !!!
    I have some troubles with the creation of a new custom adapter for NW 7.1. I have followed some pdf and notes, like :
    [Upgrade an SAP NetWeaver PI 7.0 Adapter to SAP NetWeaver PI 7.1|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0667f56-96c7-2b10-0e9a-c40fbd523f4d]
    note : 1004000
    I have all the materials to make the custom Adapter ( like file .sca with all .rar and .sda , like file sample_ra.rar with all the file .java, like all the libs for the projects ) and I have make it !!! But, when I try do deploy it, i recieve a warning that i don't understand, this is the warning :
    S U M M A R Y
    ~~~~~~~~~~~~~~~~~~~
    Successfully deployed:           0
    Deployed with warnings:           1
    Failed deployments:                0
    ~~~~~~~~~~~~~~~~~~~
    1. File:C:Users
    maienzaDesktopCreazione del SDAPI71_AF_myFirstCustomAdapter_ver_2.0.sda
         Name:PI71_AF_myFirstCustomAdapter_ver_2.0
         Vendor:sap.com
         Location:SAP AG
         Version:7.1007.20090310105326.0000
         Deploy status:Warning
         Version:NEW
         Description:
              1. Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
         at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Result
    Status:Warning
    I have see in the nwa if there are some applications or services that are stopped but all the necessary it's started, just one question : in the pdf for upgrade from 7.0 to 7.1 no one speaks about ejBean or about a creation of it ... it's necessary an ejBean ?? Beacause in the file .sda of the file .sca that i have downloaded there are more of the adapter with ejBean ....
    Antonello

    Hi,
    the adapter metadata it's been created but my service is still stopped; when I try to start it, in the NDWS -> Deploy view -> tab Repositary view, I receive this errors, one after the other, cause I try to start it 3 times and in each time I received 3 differents errors :
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)

  • I need a ac adapter for a cINEMA DISPLAY 23 "

    I need a ac adapter for a cINEMA DISPLAY 23 "

    Here is the long thread on this issue. Two suppliers are mentioned somewhere in the heap, but please see my ordering summary in my second post there of 03-21-2008. Good luck!
    http://discussions.apple.com/thread.jspa?messageID=6050853&#6050853

  • [svn] 2169: Add a new proxy adapter for code coverage.

    Revision: 2169
    Author: [email protected]
    Date: 2008-06-20 12:53:04 -0700 (Fri, 20 Jun 2008)
    Log Message:
    Add a new proxy adapter for code coverage.
    Modified Paths:
    blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/proxy-config.mods.xml

    Hello,
    I have not used a ThinkPad X1 Carbon (Type 3444-F9U) myself, but here is the configuration of the machine as it originally shipped:
    i7-3667U(3.2GHz), 8GB RAM, 180GB Solid State Drive, 14in 1600x900 LCD, Intel HD Graphics, 1Gb Ethernet, UltraNav, Secure Chip, 4c Li-Ion, Win7 Pro 64
    According to the Detailed Specifications page for this model, the unit shipped with an Intel Centrino® Advanced-N 6205S, 2×2 wireless card, and from looking the Drivers and Software page, it uses a USB 2.0 Ethernet adapter.
    Here are the various drivers for Windows 7 (x86) that I was able to locate for this model:
    Intel Chipset Support Software v9.2.0.1021
    ThinkPad Bluetooth with EDR Software v6.5.1.4500
    Lenovo USB 2.0 Ethernet Adapter Software v5.12.9
    Intel Wireless LAN Driver Software v17.0.5
    I would suggest starting with the Intel Chipset software first.  The order of the ofther software packages should not make much difference.
    Also, make sure the Wireless Radio Swich located on the Left Side of the ThinkPad X1 Carbon is enabled before installing the Bluetooth and WLAN drivers.
    One thing you might want to keep in mind is that with a 32-bit version of Windows, the operating system will only provide access to between ~3.2 and 3.5GB of the installed 8GB of RAM.  With the 64-bit version of Windows 7 that came with the unit, you will have access to the full 8GB.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Need new compact printer for lion os, suggestions?

    Need new compact printer for lion os, suggestions?

    This page provides the specs and requirements for Moutain Lion: http://www.apple.com/osx/specs/
    It appears you must be running Snow Leopard (or newer) to upgrade to ML: http://www.apple.com/osx/how-to-upgrade/

  • Need Windvd 5 for my Qosmio F10

    Hello,
    I have a Qosmio F10..a Japanese one...I live in Turkey and formatted my f10 ..Now it is English but I do not have programs such as Windvd and dvr ...and I cannot watch TV in windows XP...please someone help me ..I need windvr 5 for Toshiba (English)...
    Thanks

    Hello
    WinDVD and WinDVD Creator applications are a part of the recovery image and it can not be downloaded or installed separately.
    You can also use other applications for watching DVDs like PowerDVD or something similar. I presume that your Windows option is not MCE and in this way you need some other application for watching TV. I am not familiar with TV tuner built in Japanese units but I have heard that Japanese units have TV tuner that can be used in whole world.
    If you have solution for this issue please let us know.
    Good luck!

  • Need TV aerial adapter for Qosmio G20

    Hi - I desperately need a lead/adapter that will enable me to connect a conventional TV aerial lead to my Qosmio G20. Can anyone advise where these can be purchased from - I've looked at the Options website - and may be missing the obvious - but I can't find one.
    Any advise appreciated. Thanks.

    Hi - I need to connect a TV aerial to my Qosmio - not the Qosmio to a TV! There's an aerial input on the rear but it is not a standard UK type adapter (i.e. a conventional aerial lead will not fit). Please can someone advise what type of lead or adapter I need (and preferably where in the UK I can purchase one from) to connect my laptop to our house TV aerial.
    Many thanks.
    Matt

  • Could I have got a new power adapter for free?

    My power adapter for my mac stopped working recently and as far as I know I didn't cause any damage to it myself.
    I read the following on the apple website:
    Additional Information
    Whether your product is in or out of warranty, you can take your adapter to an Apple Authorized Service Provider or Apple Retail Store for evaluation and replacement if necessary. Pending the results of evaluation, you may or may not be eligible for a replacement adapter free of charge. Signs of accidental damage would negate any coverage. Be sure to bring in the computer used with the adapter; it is required to process potential adapter replacements.
    Which seems to suggest that even out of warrenty, if the charger has broken of it's own accord you can still get a free replacement?
    I took my adapter and mac to the shop, they said there were no signs of accidental damage but said I still have to pay for it. I referred to this statement from the website but they were very dismissive and kept saying it was out of warrenty. Perhaps i'm reading the statement wrongly.
    Just wondered if anyone could clarify :-)

    As you indicated, it depends on the results of the evaluation.
    Apple takes responsibility when design faults cause certain failures, especially when it represents a safety concern. There have been a small number of cases where failure met certain characteristics that Apple deemed that it should not have happened, regardless of age or use.
    I am reluctant to indicated the specificity of some of these issues, because for many reasons Apple would not want us speculating on the subject. Suffice it to say your product failure may not have met any particular characteristics associated with failures deemed to have extended coverage.
    If your product failed for an unknown reason, or apparently a failure stemming from age or normal life expectancy use, and it was after the normal expiry of warranty, then no further consideration was given. You need to buy and pay for a new one, unless you yourself, can provide extenuating circumstances to consider.

  • New power adapter for old macbook - It doesn't work!

    Hello!
    My MacBook is 3 years old. My power adapter got broken at the end where you put it into the socket.
    Now I bought a new power adapter. The adapters have changed now. The end where you put it into the computer looks now a little bit different. But they told me in the Apple Store that it will also fit my 3 years old Macbook.
    At home it really fit my Macbook but it didn't charge. Nothing happened, no light. How can that be? Then I combined the two, the end for the socket of the new power adapter and the other part where you put it into the computer of my old power adapter. Now it charges. So is the problem after all the part where you put it into the computer of the new power adapter that looks different now?
    Or what can I try now?
    Thank you for help!
    Sorry for my bad English.
    xenchen
    Message was edited by: xenchen

    You may need to download and install the SMC firmware update:
    http://support.apple.com/kb/DL1312?viewlocale=en_US

  • Need new result file for each iteration of a loop

    I am using TestStand 2010 SP1.  I have a main sequence that essentially does the following:
    Initialize the test equipment and set up the test environment [Sequence Call]
    Start Loop
    Run Tests [Sequence Call]
    End Loop
    Because testing can continue for hours, the resultant report file is enormous and difficult to evaluate. I need to create a new result file for each loop iteration.  I know that starting a new execution of “Run Tests” will create a result file for each iteration of the loop, but the new execution will not have access to the handles to the test equipment that were made during initialization.  The testing is time critical, therefore initializing the test equipment and setting up the test environment must occur outside of the loop. 
    How can I programmatically create a new result file at the beginning of the loop and close the result file at the end of the loop?  I am open to any other suggestions.  Thank you in advance for your help!

    Hi,
    You could modify your process model by making a copy of Test UUTs entry point. Then make the loop that usually tests multiple UUTs into your loop. Take the loop and init out of your sequence. You can init in PreUUTLoop or the other pre loop sequence, and maybe store your references in runstate.root.Locals and pass them to MainSequence. Then you can use Report Options to set it for separate report files.
    cc

  • Do I need an active adapter for my third monitor? (GTX 770)

    I have a GTX 770 and with it a 2560x1440 monitor is connected through Dual-DVI.
    I want to connect my TV and a second 22" computer screen to my graphics card. The MSI 770 Gaming has this:
    Dual-link DVI-I x 1
    Dual-link DVI-D x 1
    DisplayPort x 1 (version 1.2)
    HDMI x 1 (version 1.4a)
    Is it possible to connect my screens so that I do not need an active adapter? Let's say the 27" screen goes to a Dual Link DVI, the TV connects to HDMI, and the 22" screen connects to either the last Dual Link DVI or the DisplayPort.
    Is this possible?

    If Vodafone operates anything like AT&T here in the States, once the SIM has been inactivated by the carrier, you would need a new one. I usually get a new SIM when I swap phones. I may be supersticious, but I think it reduces problems.

  • Do you need a converter/adapter for the iphone 4s when I go to Italy?

    Do I need a converter/adapter to charge a iphone 4s in Italy?

    No converter is needed - the AC adaptor works will all voltages.  Depending on whare you live, you may need an AC outlet adaptor in order to plug it in.

Maybe you are looking for

  • Problem: Uploading Video To iPod

    Ok here's the issue. 8 times out of 10 when I connect my iPod via USB, it does not give me the option to upload video to my iPod. I would click on the "iPod Options" where you can select Automatically update this and that... and I only see four stand

  • Mass structure and table Inconsistencies after upgrade

    Hi all, I'm on an upgrade project upgrading system from R/3 4.6 to SAP ECC 6.0 EHP4. After the upgrade, apparently there's a mass inconsistencies that happen in the table. There's at least 1000 table which can be activated because of this inconsisten

  • Large input xml request to BPEL

    Does BPEL load the whole input request xml in memory? I have a input request having multiple IDs. The oracle business rule transforms 1 id at a time. BPEL calls the business rule in flowN for a size of 20. (processes 20 ids at a time) The input reque

  • Getting Files off of ATV

    Hi All, Is there a way to get files off of ATV that have been synced from iPhoto? Here's my problem. I have a LaCie drive that I use to save all of my media files on and that drive syncs my photo's to my ATV. I can no longer mount my LaCie drive; whi

  • MacBook Pro does't boot, logic board dead?

    Hi there, I have a big problem with my MBP 1,87 Ghz. It doesn't boot anymore, I press on button and fans starts, hd seems to make a little noise too and anything else happen, screen remain black and the white led is on but doesn't blink. Keyboard see