Need new compact printer for lion os, suggestions?

This page provides the specs and requirements for Moutain Lion: http://www.apple.com/osx/specs/
It appears you must be running Snow Leopard (or newer) to upgrade to ML: http://www.apple.com/osx/how-to-upgrade/

Similar Messages

Which new inkjet printer for my iMac early 2008?

I need a new inkjet printer for my iMac early 2008 (until now I use an old Epson Stylus Photo 1200 which now is going to its end of life).
Which printer would you choose, especially for photo prints?
Thanks for your answers! :-)

I should have mentioned that I may have the same computer you have - a late (December) 2007 iMac. I continue to run 10.4.11 Tiger because of some antiquated software I use that is not compatible with later operating systems. An additional thing I like about the Canon is its five individual ink tanks. When one color runs out, I just change out that one cartridge and keep going.

I need find a printer for my desktop 10.4 ?

I need find a printer for my desktop 10.4

What makes you think svergara has a MacBook?
10.4.0 through 10.4.3 didn't even come on any MacBook or Intel Mac for that matter.
10.4.4 through 10.4.11 may be a MacBook, or may be another Intel Mac, or another PowerPC Mac.
Svergara,
Please state what computer you have in Apple menu -> About This Mac. If possible open the System Profiler in Applications or Applications -> Utilities and also tell us your machine ID. It should be in the format PowerMac 8,2, or MacBook 1,1. Or at minimum tell us is it an G3, G4, G5, or Intel CPU.
DO NOT give us your serial number. That's your key to your personal info that someone can use against you.

Need new result file for each iteration of a loop

I am using TestStand 2010 SP1. I have a main sequence that essentially does the following:
Initialize the test equipment and set up the test environment [Sequence Call]
Start Loop
Run Tests [Sequence Call]
End Loop
Because testing can continue for hours, the resultant report file is enormous and difficult to evaluate. I need to create a new result file for each loop iteration. I know that starting a new execution of “Run Tests” will create a result file for each iteration of the loop, but the new execution will not have access to the handles to the test equipment that were made during initialization. The testing is time critical, therefore initializing the test equipment and setting up the test environment must occur outside of the loop.
How can I programmatically create a new result file at the beginning of the loop and close the result file at the end of the loop? I am open to any other suggestions. Thank you in advance for your help!

Hi,
You could modify your process model by making a copy of Test UUTs entry point. Then make the loop that usually tests multiple UUTs into your loop. Take the loop and init out of your sequence. You can init in PreUUTLoop or the other pre loop sequence, and maybe store your references in runstate.root.Locals and pass them to MainSequence. Then you can use Report Options to set it for separate report files.
cc

Printer for lion 10.7

HI.
I'm looking for a new Laser Printer ( B"W with print - scan - copy - fax , up to $300 not necessary wireless ) to be compatible with Lion 10.7 iOS and simple update .
Can U recommend one please ?
Thanks

One warning about the MX882. You cannot send a fax from the Mac via the machine. This is not a Lion limitation. Canon has never made a fax driver for OS X for their inkjet based AIOs. So you would have to print the document first and then place it into the MX document feeder to fax it.
There is no problem with printing from or scanning to Lion with this model.

Need to upgrade processor for Lion operating system

How do I upgrade my MacBook Pro processor for Lion operating system?

I have the same question. I have a MacBook Pro 1,2 (yeah, oooooold) with the 2.16 Intel Core Duo, running Snow Leopard. If I'd waited another month before buying, it would've had the Core 2 Duo.
It would appear that I can't upgrade to Lion. I found one forum post that gives me hope, but I'm not holding my breath: http://www.mac-forums.com/forums/apple-notebooks/84004-processor-upgrade.html#po st524333 It suggests that the CPU might not be soldered in. Which leads me to wonder if upgrading the processor is possible...
I'd like to know if upgrading the processor is possible and/or practical (as in, doesn't cost as much as buying a new mac).

New VisualHub updater for Lion seems to work great

I downloaded and ran the Visualhub updater for Lion, and converted a .mpg to flash, mpeg-2, h264, and wmv.
Unless I am missing something, we have been given quite a gift.
Hugh

But iMovie 06 works fine in Lion.
Apple knows that millions of people are still using iMovie 06, (with iDVD11) so continued compatibility is logical.
Thanks for the report. This is good news!

Need new activation code for NFR XS key

who knows who to email to receive new activation codes for logic NFR key. I havent gotten a response for the [email protected] address. what is the proper Apple email address to get codes from?

All the suggestions in this forum were made because people assumed that you are using Logic Pro 7.1 and Mac OS X.
I didn't assume this at all. I still think that they should be contacting apple, because as far as I can tell, an NFR version of a no longer selling product is not something you would ideally want to be hanging on to. apple would be able to tell you if they'll change it over for a logic 7 one, or to have a license bought for it so you can keep running 6 on OS9. NFRs are after all demo versions, usually given out to dealers and/or VIPs, I don't see why they would want to maintain NFR licenses out there for software that they are no longer demo-ing to sell. doesn't mean you can't buy a normal license though.

Just need a cheap printer for home use

Can sombody suggest a cheap color printer (say around $50) that I can use at home to just print simple documents. I want something I can hook in to my Airport Extreme by USB, that will let me print from both a PC and a Powerbook running Tiger.
I just bought a Lexmark Z735, and it doesn't seem to be at all Mac compatible. There are no Mac drivers, even on their website.

Hi,
I found a really great ink jet printer for you that will work with both Mac & PC. It is from Epson and only costs $59.99. The Epson Stylus C68 offers the perfect solution for fast, affordable home printing. You can print your simple documents as well as photos too. Visit this link to learn more:
http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&in foType=Overview&oid=58650440&category=Products
I did check out the Lexmark Z735 and you are correct, there is no driver supported for the Mac. It is for PCs only.
-Jason

Need new power adapter for Qosmio F50

Hello
I am in need of buying new power adapter for my Qosmio F50 126. The reason being if I try to run more demanding application on my computer, the entire computer just crashes, shuts down. I need to buy a new adapter before my entire computers crashes result in destroying my HDD. I am not sure if my battery are died or the power adapter fails to charge them up.
The picture of underside of my power adapter is shown below.
https://www.dropbox.com/s/qcrk4fl5bhftbzm/IMG_20131220_215821_454.jpg
What I would like to know if the following two adapters are the same and would work with my model. I ask this because the price difference between the two units is significant., 20 USD. Also, I will be importing it from the USA using an agent here. Therefore I need to get it right on the first try.
I'm curious about the connecter it has on the end. I wonder if its same as the one which came with the notebook. I believe it wont be an issue with it clearly says it supports my model, Qosmio F50 126
Another find which I believe is the best and most compatiable.
This one will sure work but the price is much higher than the one mentioned above
Regards
Abdusamed
+Message was edited: link to onlineshops has been removed - advert+

Hi
You need an AC adaptor which supports *19V and 6.32A*
The Ampere value might be a little bit different. This should not be a big problem but you have to ensure the Ampere value isnt too low. The notebook needs enough power to run properly and to charge the battery.
However, the Volt value (19V) cannot be different. _It has to be *19V_*
The original AC adaptor has the part number: *PA3290E-3AC3*
I recommend you to purchase the AC adaptor recommended by Toshiba.

Printer for Lion and airprint

Can anyone recoomend a printer that works well and for sure with Lion and also with Airpint for the I pad ? I have been trying to make an HP-CP1025 nw work with Lion and airprint for 3 days (on the phone with HP support) and finally decided to give up. An reccommendation woudl be great. A siple printer would be best. Thanks

hi there,
Thanks for your reply.
I agree there has to be a recurring problem that is not due to hardware. HP has sent me 3 printers as they claim is a 'hardware' issue, but I cannot believe that 3 printers in row are failing !
I have a an Apple Airport Express (brand new) plugged into a modem from Time Warner Cable service. The model of the modem box is: Scientific Atlanta 2100 (on the back the unit is listed: DCP 2100R2)
Any suggestions you may have are greatly helpful. I intend to buy a new printer (HP refunded me) but I need to make sure it will work with the configuration I have here). By the way, I do not know what multucasting is, should I call Apple or Time Warner to find out if multicasting is supported by my device ?
Thanks again

Help needed with existing printer for MacBook

Apologies if this question is in the wrong section of the forum - please feel free to move it!
I am new to the "Apple Experience" and have had this superb MacBook for a couple of week now. I need to connect my existing laser printer, a Samsung ML-1750 to the MacBook and so far, I have had no joy. The Samsung website is not a lot of help with regard to downloading a Mac driver and while the MacBook seems to have found the ML-1750, when printing, the printer just outputs a load of garbage! From where do I obtain the correct driver!
Please help!
Thanks, Dan

Hi Dan,
welcome to macbook forum,
Try gimp-print as suggested by Kappy and or you can choose either the nearest model to your samsungs or generic post scripts printer.
http://gimp-print.sourceforge.net/
http://gutenprint.sourceforge.net/pSupportedPrinters.php3
Good luck

Need New Video Cards for 4 Displays

Hi,
I want to install 4 displays, with one being a 30". Will the Radeon 9200 PCI, and 9600 pro work for this?
I saw that 9600pro only boots in "safe mode" but that's the only AGP card I can find that will run the 30".
Are there any PCI cards with two DVI ports?
Thanks

Hi-
Wouldn't getting the 9600 and a 9200 be the most cost effective?
Need two 9200's and one 9600 to connect 4 DVI displays. At around $400, it would be the cheapest. The 9200, though, will have minimal graphics acceleration and no Core Image support. Quartz Extreme is also not supported, unless hacked. Either the hack, or the lack of CI or QE support may affect software performance negatively.
Depending on the distance from the source computer, a signal booster may be required. 5 meters is the maximum a DVI signal can travel, but lesser powered cards may have difficulty at 10 feet (or less). If a booster were needed, a 9600 and a splitter would be better.
Wouldn't the splitter just mirror the output?
The splitter mirrors the output of the primary display +on the splitter+, not necessarily the card.
When you say "better" what do you mean? I won't be doing much 3D stuff and no gaming.
The linked cards support Core Image, Quartz Extreme, 30" ACD, and have power enough to send clean DVI signal farther.
Plus I can't find it new which is how I would prefer to buy it.
The Flashed PC cards are new. Because of the fact that they have been installed in a machine to flash the Mac ROM to them, eBay rules require that the card be listed as used.
New card prices are scary. See prices here.
Slightly lower prices here.

Need a HP printer for private use,including letter printing, photo, scanner,

June the 29th 2011
URGENT
Can U recommend me a HP printer, type HP Photosmart C4680 , or similar , using same ink 300
Thank You ?
Henry1905
PARIS

I too have an 8500 AIO (A909g), and in general I like it a lot. Have you tried using it to print directly on envelopes? I have not tried that personally, but it seems like the printer is capable of having multiple envelopes loaded at once for printing. Also, if you don't have it already, you can buy a 2nd tray for the 8500, so you can keep envelopes loaded in that tray, without needing to remove paper from Tray 1 all the time.
Another option might be to get transparent labels and print on those, instead of printing directly on envelopes. I do that, and the finished product looks pretty smart.

Need new serial number for Photoshop Elements 6 - how to get?

I purchased Photoshop Elements 6 for my mom back in 2007. She's FINALLY getting around to installing it today and it keeps giving her an invalid serial number error.
So I loaded her up on Team Viewer to make sure she's doing everything correctly (she's elderly) and she was.
The error screen says she could retrieve the number from 'my' account or request a new one.
I logged into my Adobe account, found the order and re-checked the serial number. It is correct.
There is no place to request a new one.
I hit the 'contact us' button at the bottom and wasted half an hour on live chat only to be told they can't help and I need to join the forums and ask here.
I do not want to buy her a new version of the product as she will only wait eons to install it again. I do not live close enough to her to do it for her.
How can I get the product to install?
She was using Windows XP when I purchased this for her. She is now 2 new computers later and using Windows 7.
Any help would be appreciated.

OK as promised I am here to update the status of this "problem" my mom has.
There was nothing wrong with her installation. Before I started doing any uninstalling or running as Admin, I put the registration number in again and it worked perfectly fine. It went to the registration page asking how I want the product registered:
Email
Snail mail
Never
I simply chose never and it loaded the program with no effort. Why register again when she already did years ago?
Thanks for all your prompt help when I first posted. It's much appreciated

Need new compact printer for lion os, suggestions?

Similar Messages

Maybe you are looking for