Need New Drive For G4

I am looking to replace my DVD/CD drive in my PB G4 15 inch 800Mhz.
It is making weird noises even when nothing is in the drive.
What make/model can I buy for this.
I found this:
http://store.mcetech.com/Merchant2/merchant.mvc?Screen=PROD&ProductCode=PBG4DVDR8DL-A&Category_Code=SVCPBG4&ProductCount=2
The current drive is matshitacd-rw cs-8121
Thanks

Hi, Angela. MCE's offerings will do nicely as replacements for your Combo drive, and give you the option of burning DVDs as well as reading them. But you can pay less elsewhere for drives that will do as well, and performing the installation yourself is quite easy with the aid of the iFixit guide for your model. If you'd rather have the job done for you and the price isn't an obstacle, MCE is highly reliable.

Similar Messages

  • Need new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

    Any one know where i can get the new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

    http://www.nvidia.com/object/7seriestechspecs.html
    Pls visit above nVIDIA web page.
    based on NVIDIA web pages, 7900GTX supports MAC OS X.
    but .....seems not so far.

  • Help Need New Driver For MG2100 Where Is It?

    I am having a hard time finding the driver for Canon Printer all in one the MG2100 series where is that can not find it please help also when I needed to print out my homegroup setup with password I get a error and it wont print help please ty 
    Error Code is 2147500037 

    Hi CynthiaAvey,
    Thanks for your reply!  We suspect you may have the PIXMA MG2120 printer, which often appears with the the phasing "2100 Series" on the manual and packaging.  However, the official model number can be found on the unit itself, typically on or near the control panel.  If the PIXMA MG2120 is indeed your printer, you can download the driver from the following page: 
    http://usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/...
    However, if you do have a different printer, or the link above did not allow your PIXMA MG2120 to continue printing, please visit the link below for further assistance.  Thanks so much! 
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HT1338 Why doesn't "Software Update" show me the new driver for the Epson 50C20D (Artisan 800) while It is on the list of available new driver?

    Since I upgraded to mountain lion, my Artisan printer stopped working. After talking to Epson and trying all kind of things, it was determined its definitely a driver problem. The PC ping the printer well but won;t print to it as it think its not connected (when it is as priven by the ping).
    The new driver for Epson 50C20D are on the list of update available drivers on the OS X wen site yet trigering "Software Update" does does detect I need it... Why is that? Thanks

    Thanks Mende1. The printer is there and installed allright. Even shows as "idle" until I try to print to it. The driver version shows 6.36 and I ned to update to 9 which is only avail from the App store... However, the app store don't detect I need it..

  • I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

    I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

    Go to: > http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_pri nters/imageclass_lbp6000#DriversAndSoftware
    It does not look like the Canon driver has change from Mavericks to Yosemite.
    If you just updated from Mavercks to Yosemite, see > OS X Mavericks: Reset the printing system
    If you have a new or clean install of Yosemite, see  > OS X Mavericks: Set up a printer

  • Re: Satellite U500-115: Need touchpad driver for Win 7 64bit

    Hello,
    I have a little question or rather a problem.
    Is there any newer driver for the alps touchpad on Windows 7 64-bit than the 7.5.303.117?
    The driver was made for Windows Vista not Windows 7, so it didn't work well on my Notebook!
    It's very slow a startup and the first few seconds I can't move my mouse pointer.
    Thank you in advance.
    Thanks
    By the way sorry for my bad english ;)

    >The driver was made for Windows Vista not Windows 7, so it didn't work well on my Notebook!
    > It's very slow a startup and the first few seconds I can't move my mouse pointer.
    Since the touchpad driver does not depend on notebook model you could use touchpad driver released for any notebook model
    Please take a look into other Toshiba notebook driver areas.
    But to be honest I doubt that mentioned touchpad behaviors are real touchpad driver bugs.
    First of all its nothing unusual that an applications (no matter what application) would need some time to load at the beginning of the boot procedure it depends on the amount of applications which are loaded at the beginning
    So wait a moment until the touchpad software has finished loading process and then use the touchpad

  • Need a driver for Acrobat Distiller 5.0.0.0 that will work on Win 7 Pro SP1 64-bit.  How can I find it?

    Need a driver for Acrobat Distiller 5.0.0.0 that will work on Win 7 Pro SP1 64-bit.  Where can I find it, and what file is it?  (Yes, it's an old Distiller that came with Acrobat 5.  So shoot me.  But I do need the driver.)
    Win 7 prompted me for an *.inf file.  Any idea?
    If I find the original Acrobat 5 CD, which .inf would it be?
    (Hey, since I'm asking, also a driver that will work on Win 8.1 Pro 64-bit.)
    Thanks.

    There is no .inf file on the Acrobat 5 CD that you can use to create a “driver.” If Distiller 5 even installs and runs on Windows 7 x64, the plumbing that came with Acrobat 5 to automatically feed PostScript files created by the PostScript driver to Distiller simply won't work with modern versions of Windows or any 64-bit version of Windows.
    FWIW, Acrobat 5 is five full versions back from the current version. And no, we won't shoot you; you are effectively doing that to yourself!  Your time must be worth something?!?! 
                 - Dov

  • Need mac driver for TP-Link Wireless USB adapter TL-WN7200ND

    i need Mac driver for TP-Link Wireless USB adapter model no TL-WN7200ND

    First of all, TP-Link does not provide OS X drivers for that adapter. However, there are other sources that have drivers like this one. It is not official and it may fail, but it has been tested by other users and it works correctly.

  • Need a driver for HP Color LaserJet

    Hi, Need a driver for my printer and I can´t figure out how I can get it.
    I have Mac OS X version 10.8.
    Please help!
    Regards,
    Lena-Maria

    According to Apple Support's list of supported printers, yours is supported in Mountain Lion.
    How is it connected to your Mac, Lena?  If it's connected via USB (and I know nothing about this printer) you should be able to go to System Preferences --> Printers and Fax and click on the "+" button. It should pop up in the left hand pane, where all you'd then have to do is select it and add it. It would then load the appropriate drivers.
    Some people have reported they have to reboot their Mac in order to get their printer to show up in the list.

  • I need a driver for Epson Photo Stylus 2200 for OS 10.5.8 PPC

    I need a driver for Epson Photo Stylus 2200 for my  OS 10.5.8 Power PC G5. Does anyone know where to locate one? Epson does not support this version of the Mac. They have  drivers for 10.4 and 10.6, but not for 10.5. Perhaps there is someone has a clue as to where I can find an original driver disk or download  for the my Epson.
    Thanks

    Hmmm, not sure what this Common Updater is, but...
    http://www.epson.com/cgi-bin/Store/support/SupportDownloading.jsp?BV_UseBVCookie =yes&licenseoid=17774&download=https%3a%2f%2fftp.epson.com%2fdrivers%2fepson1428 4.dmg&pn=Stylus+Photo+2200&pc=Epson+Stylus%26%230174%3b+Series&ft=Drivers&return page=%2fsupport%2fsupDetail.jsp&returnparams=%26infoType%3dDownloads%26oid%3d144 02%26platform%3dOSF_M_X5
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14402&infoType=Down loads

  • We need new Update for Xperia 2011 only

    Hi Johan,
    we need new Update for Xperia 2011 only,
    in This Update We need Only 3 times :
    1- Battery Precentage
    2- Change Network ( 3G - E - H ) Icon
    3- Messid Call in Lock Screen ( Swip to se the message )
    Because  Today i'm see the ICS in Xperia P and there is the battery precentage ,
    and the network icon for ICS not nice and very small
    and the mesed call in Xperia S in the lock screen  ( Swip to se the message ) at's very nice
    Yoc Can send me the ditales in my Gmail : [email protected]
    ok , dont forget
    Bettery precentage : in the Xperia P ( 4.0.4 ICS )
    Lock Screen : Xperia S ( 2.3.7 GB And 4.0.4 ICS )

    Thank you for your feedback. It will be forwarded.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Hi. I need a driver for  printer Hp scanjet N 6350.

    I need a driver for installing to my iMac, i cany find officially driver Hp Scanjet N 6350. Please help me

    I would recommend VueScan,  you can get a trial copy to test it with then buy the app once you are convinced it works.  You can find it by clicking http://www.hamrick.com/
    Good luck.

  • HELP! I need a driver for Soundblas

    I need a driver for my creative labs soundblaster generic for Windows XP, model # ct745a-tbp
    I can't find one anywhere
    Please help!!

    I'm having the same problem. So any info would be appreciated. Thanks

  • Need a driver for w7

    need a driver for w7

    The LJ 4000 PS comes with Windows 7 printer drivers. (make sure to run the update the printer drivers)
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Where to buy new drives for Xserve RAID

    I have been looking all over to buy NEW drives for my RAID. Can anyone direct me where to go to buy new drives with the slot attachment? 500GB or 750GB
    Forgive my lack of specific/correct terminology - I am a newbie when it comes to the RAID.
    Thanks in advance!
    Brian

    I think the fine print says DVD Player support requires 10.3 or higher. But you can still play DVDs in the original drive you have, and are looking to add a drive in the empty bay, right?
    Also, Patchburn is available for 10.2 to add native burning support, or you can maybe find an old version of Toast (5 ?) for 10.2 that should allow you to burn to the drive.
    http://patchburn.de/download.html
    I agree with the suggestion to upgrade to 10.3 or 10.4, if you can, but you should be able to make this drive work in 10.2 (and still use the original for OS 9 and DVD Player) and decide to do the other upgrades later on if you want.
    http://eshop.macsales.com/item/Pioneer/DVR112/

Maybe you are looking for

  • HT2494 New Macbook pro retina (haswell)

    I have the new macbook pro retina, I have been into the sound settings to switch my input on headphone/built in mic to line in but the option is not there?

  • Troulbe importing .aac

    I've been using Premiere Elements 4 for a while and have never been able to import .aac file formats, despite the format beging listed as compatible.  I keep getting an error message stating: "File format not supported/One of the necessary components

  • How do I transfer apps from my itouch to itunes...somehow they are not in itunes library

    I have an old ipod touch..for some reason my apps did not transfer to itunes and I need to get apps on itune account so I can put themon my iphone

  • Two users editing one file over internet

    I know this is a long shot, but would there be a way to have a file open at the same time as someone else across the internet and sort f co-edit the file through cyberspace??

  • Upgrade from Windows Server 2003 to 2008

    Hi Experts, We are currently running SAP BPC v 7.0 for Microsoft in a Windows Server 2003 environment. This is not a production application right now as we are doing discovery work in SAP BPC 7.0. For another project, we need to upgrade to windows se