Need new driver & firmware for HL-DT-ST DVDPAM GSA-T30 FOR MY COMPAQ 6830S

Model HP Compac 6830s laptop.
operating system windows 7 professional service pack 1
I cannot burn dvd-r disks.
I get a message to install drivers.
I used devicemanager to unstal the device driver.
Rebooted system, found new hardware-installing
Did this twice, Still unable to record

malper wrote:I cannot burn dvd-r disks.
Hi,
From my memory HP laptops used to write to DVD+R only. I don't know how far back.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

I Need the driver CD for Zen To

i need the driver CD for my Creative Zen Touch for Windows XP
because i lost it
and how can I contakt the german creative support
i dont know how i can contact creative with phone
is there any german Creative forum ?
or have anyone an idea how i can get the driver cd for Zen TouchMessage Edited by T3chn0fr3ak on 03-26-2006:36 PM

Hi, ich denke mal, ich kann dir auch in deutsch antworten.
also von dem link oben aus, w?hlst du erst mal mp3 player, dann zen und schlie?lich zen touch. auf der n?chsten seite kannst du dann dein betriebssytem ausw?hlen (sprache ist egal) und w?hlst dann noch driver aus. dann hast du auf der n?chsten seite nur eine datei zur auswahl, n?mlich den aktuellen treiber f?r windows xp f?r einen zen touch mit der alten V. Firmware. Dann m?te WIndows den Player erkennen. Zum Transfer von Musikdateien, empfehle ich dir dann noch den Nomad Explorer runterzuladen, den w?rdest du dann finden, wenn du oben anstatt driver, application ausw?hlst. Der macht das ?berspielen und verwalten der Musikdateien einfacher.
Ansonsten besteht auch noch die M?glichkeit, die Firmware des Players upzudaten, auf die V.2 mit der Playsforsure F?higkeit. Dann reicht es, wenn auf einem Computer XP und der Mediaplayer 0 installiert sind. Ein Treiber w?re dann nicht mehr n?tig.
Ich empfehle dir allerdings, erst mal die treibervariante auszuprobieren, da das update nicht mehr r?ckgangig zu machen ist, und wenn du mit der alten variante zufrieden bist, ein update nicht zwingend n?tig ist.
wenn du noch fragen hast, dann schick mir ne pers?nlich nachricht, ich bin eigentlich alle zwei, drei tage in diesem forum.

New BIOS firmware for B590 Notebook (20206)

Hello.
Where can I find new BIOS firmware for B590 Notebook (model 20206)? support.lenovo.com provides an earlier version (08 Oct 2012), but I need at least the same as in the notebook now (15 Nov 2012).
Just wait for a new firmware becomes available at lenovo.com?
How can I find out when it will happen or whether happen at all?
Or at least how to save the current BIOS? Preferably by regular means. It looks like Lenovo utility can only update (and reported that the installed firmware is fresher).
Thanks.

Still nothing. Is there any hope?

When will new update (firmware) for E72 will come?

when will new update (firmware) for E72 will come?

Firmware update for E72 has already been released..
v22.007 has been around for many European models since around January
v23.002 has been around for Asian/Middle-East models since this February.
Some operator-branded phones may not have available updates yet though.
You can use the Device Software Update page (search for the links in Nokia website) and enter your product code to find out if your product code has been included in the firmware updates already.

When will Sweden get the new v50 firmware for noki...

When will Sweden get the new v50 firmware for nokia 5800? Why is our country amongst the last few to get available updates?

I live in the US. I should be the one complaining! As an American, I'm not used to waiting forever for everything. The US is a large market Nokia neglects. Of course, few of us buy its phones but that's the company's fault for making so many **bleep** models. Many nations don't even get updates at all! They're still stuck on firmware 3. Trust me, you have it good up there in Sweden.

So, are we going to have the new v30 firmware for ...

After talking about new v30 firmware for the N97 we got the v22.0.110 which is good and fixing all the known bugs.
So are we going to have the v30 firmware or not?

as an N97 user I also hope there will be updates , but fear it will be left dead in the water , the severe memory limitations of the phone restrict how much can be done and so I expect it's had it's day Hope I'm wrong , but not very optimistic , hoping Symbian^3 will give the experience I had hoped for !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Need new compact printer for lion os, suggestions?

Need new compact printer for lion os, suggestions?

This page provides the specs and requirements for Moutain Lion: http://www.apple.com/osx/specs/
It appears you must be running Snow Leopard (or newer) to upgrade to ML: http://www.apple.com/osx/how-to-upgrade/

Where can i buy a new cooling fan for my Compaq Presario CQ61-330SO Notebook PC?

like the headline says.
Where can i buy a new cooling fan for my Compaq Presario CQ61-330SO Notebook PC?
it died almost a month ago and i have been searching for a new one since
I searched all over HP's website and cant find any information about that, not even the name of the fan.
som help here would be wary appreciated

Hi,
You can order from here:
http://h20141.www2.hp.com/hpparts/?cc=US&lang=EN&jumpid=hpr_r1002_usen
and part # is in here (page #3-4):
http://h10032.www1.hp.com/ctg/Manual/c01868653.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Need new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

Any one know where i can get the new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

http://www.nvidia.com/object/7seriestechspecs.html
Pls visit above nVIDIA web page.
based on NVIDIA web pages, 7900GTX supports MAC OS X.
but .....seems not so far.

Editing software crashing-do I need Display driver update for Satelite C660

Hi folks,
recently I have installed trial versions of Adobe Premier cs5, then avid media composer and neither of them are loading, (not responding) and Adobe crashes on importerquicktime.prm.
Everywhere I look it seems to be telling me I need to update my drivers, but I have the latest driver available for this model,
Is it a QuickTime issue?
Or a driver issue?
Can anyone help me or even let me know what my options are?
Thanks
Conor

Hi
In internet I could find this interesting info:
+I am having issues with the ImporterQuicktime.prm with the new update 5,03.+
+Ive been editing on a project for months, and exported a QT with Avid DNxHD codec,+
+I started another project with this QT DNxHD file (to make sample clips), and then I updated to 5.03, and now PPro CS5 runs very slow, and then locks up. I did read the forums to find a solution.+
+I noticed when re launching PPro CS5, it would hang on the Exporter, and Importer Quicktime .prm, so I tested removing the plugin from the PPro>plugin>common folder. PPro CS5 launches very quickly and runs smooth- although the QT files are off line+
It looks like its not display driver issue If the info above would not help you, you should get in contact with Adobe support

New driver releases for E-MU PCI, PCMCIA and USB models (Jan 2008)

For XP/Vista
PCI & CardBus v2 - http://www.emu.com/support/welcome.asp?rd=download
0202 USB & 0404 USB v2 (preview, expires in May '08) - http://connect.creativelabs.com/emu/default.aspx
jutapa
Message Edited by jutapa on 01-18-200810:24 PM

maiki wrote:
I see very new driver and Patchmix releases for the 1616 and 1616M PCMCIA interfaces (1/16/08), I did not look at the pages for the PCI boards, but I sure don't see any new drivers, firmware, etc for USB, 0202 and 0404 USB.
For instance, here is the current page to download drivers, etc., for the 0404 USB:
http://www.emu.com/support/files/dow...cy=&Platform=1
The install package there is dated April 2007.
Why did you include USB models in your post about new driver releases? Are they somewhere else?
Hmm... maybe you didn't look close enogh behind the link given for drivers for USB models in my post ... though, those are not new final drivers but as the previous USB driver expired 17 or 18 January, E-MU refreshed them 18 January. Also, I have not informed anything 'bout new drivers for USB but only new driver releases as the subject says.
jutapa

Driver/firmware for ethernet port??

I recently got rid of my PC (YAY!!!), meaning I no longer need my cheap crappy wireless router. However, when I hook my Ethernet cable up to the port in my PB, I can not connect to the web. I'd like to try reinstalling the necessary driver/firmware, as doing so recently solved my non-working USB ports problem, but I don't know where to find the driver... Can anybody post a link to a site where I can download a driver? Or perhaps have a better way to connect?
(I understand that what I am looking for is probably under my nose, but I'm not computer savvy enough to know what terms to search for.... heh..)
thanks

Sorry, posted this one in the wrong department... I asked in the proper one (Networking, internet, etc...) Mods can delete this if so desire

New drives help for APPLE RAID Card RAID Redo

Hi,
I've been happily using an Apple 3,1 MacPro with Apple RAID Card installed and connected to 4-500 GB Apple OEM drives. I'd like to redo my setup and replace the Apple drives with bigger drives. Someone said I could only use up to 2 TB drives - is this correct?
Has anyone done this or anything like it using Seagate Drives that are not Apple OEM. Will that work OK or will the Apple RAID Card want to see Apple OEM drives? Apple sells 2TB Seagates, but they cost a lot compared to non-OEM drives, but will cheaper generic Seagate Barracuddas work OK in every way?
Also, after accomplishing this upgrade, I'd like to upgrade this machine to the latest Lion and possibly even Moutain Lion System Software. Any issues perceived?
To reiterate, I'd like to increase my storage to the max in my Early 2008 MacPro3,1 which has the Apple RAID Card utilizing a RAID5. This is spec'd at "4 - 3.0 Gbps Serial ATA (SATA) controllers" but no mention is made of what the MAX Size drives that will be addressed by the RAID Card.
Thanks, and so long for now, TOM

I thought it was an oxymoron to be using Apple RAID card, and to be happy.
It does not support drives larger than 2.2TB
Seagate's just seem to be more trouble. Any enterprise drive should do.
If you really really need RAID5 then maybe this card is useful, otherwise, no.,
There is much less than 300MB/sec x 4 in bandwith, they are shared and not independent, but the total is more like 800MB/sec maximum. Less overhead and other factors comes in more like 700MB/sec total max. \
SSDs have come a long way.
Use a PCIe cards to manage 2 x SSDs of 500GB up to 1TB
Use Disk Utility or SoftRAID 4 to manage 2-4 drive mirror or stripe arrays
10.8.4 has a bug that interferes with using 3TB and larger drives, just introduced bug.
This is the FIRST time there have been limits on drive size. And Apple RAID card. Seems the card is not getting updated firmware to address the need for larger drives. For those using SAS it is also a viable candidate.
SSD on its own to hold the system. 4 x 2TB WD Black for data and media storage. 4 x SSDs for scratch and graphic catalogues and media... all depends what your goal and use and type of programs.
No you do not need to use Apple's.
I cannot vouche for or seen someone doing so but I would hope that WD RED series would be suitable.

Need new result file for each iteration of a loop

I am using TestStand 2010 SP1. I have a main sequence that essentially does the following:
Initialize the test equipment and set up the test environment [Sequence Call]
Start Loop
Run Tests [Sequence Call]
End Loop
Because testing can continue for hours, the resultant report file is enormous and difficult to evaluate. I need to create a new result file for each loop iteration. I know that starting a new execution of “Run Tests” will create a result file for each iteration of the loop, but the new execution will not have access to the handles to the test equipment that were made during initialization. The testing is time critical, therefore initializing the test equipment and setting up the test environment must occur outside of the loop.
How can I programmatically create a new result file at the beginning of the loop and close the result file at the end of the loop? I am open to any other suggestions. Thank you in advance for your help!

Hi,
You could modify your process model by making a copy of Test UUTs entry point. Then make the loop that usually tests multiple UUTs into your loop. Take the loop and init out of your sequence. You can init in PreUUTLoop or the other pre loop sequence, and maybe store your references in runstate.root.Locals and pass them to MainSequence. Then you can use Report Options to set it for separate report files.
cc

When will Sweden get the new v20 firmware for N97?...

OK, third attempt. This time I will not make any harsh comments directed at Nokia as they have threatened to remove my account.
Please, please, pretty please with sugar on top, when will you release the v20 firmware for unbranded Swedish N97? I would be super-duper happy if you would release it very, very soon and I would be even more happy if there was any kind of schedule for the release. I see that many, many other regions have it already but not the Nordic countries.
Former owner of E90, N97 x2, E72, N8 and current owner of E7.

Sadly all you can do is wait like many people in many other countries have to do. Shouting, ranting, threatening nokia on this forum will not get you any results whatsoever.
Nokia will not give you a date for a specific country, they never do because in most cases they do not know. Different countries have different approval processes and some are more efficient than others.
Take a look at the software updates board and see how many people are in the same boat as you. UK users have been especially vocal about it on a thread that I started. We managed to keep that thread constructive which lead to comments from nokia and coverage in the UK press.
It's a poor situation that for the moment we are stuck with. Anyone that doesn't like it is welcome to foot with their feet.
As for v20 on the N97 you really need to fully reset the phone (dial *#7370# which wipes all data from phone memory) after installing it to get the most out of it. Before a reset it's ok, after it's been great for me so far.
Also for the lens and GPS issues it's entirely at the care points discretion if they lend you a phone or not. Care points are independent companies, not run by nokia. Again some are more efficient than others.
Message Edited by psychomania on 30-Oct-2009 01:22 PM

Need new driver & firmware for HL-DT-ST DVDPAM GSA-T30 FOR MY COMPAQ 6830S

Similar Messages

Maybe you are looking for