Need new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

Any one know where i can get the new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

http://www.nvidia.com/object/7seriestechspecs.html
Pls visit above nVIDIA web page.
based on NVIDIA web pages, 7900GTX supports MAC OS X.
but .....seems not so far.

Similar Messages

Windows 7 driver for GeForce 320m Graphic Card and Broadcom wireless card

I just got my 11" MacAir (2011)and installed Windows 7 on it using Parallel software. Everything works fine except for the driver for the Broadcom BCM 43xx1.0 airport wireless card and for the GeForce 320m graphic card. Windows 7 cannot find the drivers. I have tried everything to find a solution: Downloaded the drivers from the Broadcom and NVIDIA websites, used the drivers that came with bootcamp and made changes to the nvao.inf file for the graphic card problems but nothing works. Does anyone know a solution to these problems? Many thanks.

Hi,
since Parallels is not an Apple product it would be better to use their own Support resources.
However, Parallels does not use the native (real) hardware of your Mac but virtualizes certain hardware.
The video adapter is a "VGA and SVGA with VESA 3.0 compatible Video Adapter" and the WiFi is mapped to a "Ethernet Virtual network card compatible with RTL8029".
For these virtual devices Parallels brings all drivers with it and names them "Parallels Tools" which you have to install manually while in our Parallels Windows virtual machine.
Refer to the Parallels User Guide http://download.parallels.com/desktop/v6/docs/en/ParallelsDesktop_UsersGuide/
Regards
Stefan

Help Need New Driver For MG2100 Where Is It?

I am having a hard time finding the driver for Canon Printer all in one the MG2100 series where is that can not find it please help also when I needed to print out my homegroup setup with password I get a error and it wont print help please ty
Error Code is 2147500037

Hi CynthiaAvey,
Thanks for your reply! We suspect you may have the PIXMA MG2120 printer, which often appears with the the phasing "2100 Series" on the manual and packaging. However, the official model number can be found on the unit itself, typically on or near the control panel. If the PIXMA MG2120 is indeed your printer, you can download the driver from the following page:
http://usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/...
However, if you do have a different printer, or the link above did not allow your PIXMA MG2120 to continue printing, please visit the link below for further assistance. Thanks so much!
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Need New Drive For G4

I am looking to replace my DVD/CD drive in my PB G4 15 inch 800Mhz.
It is making weird noises even when nothing is in the drive.
What make/model can I buy for this.
I found this:
http://store.mcetech.com/Merchant2/merchant.mvc?Screen=PROD&ProductCode=PBG4DVDR8DL-A&Category_Code=SVCPBG4&ProductCount=2
The current drive is matshitacd-rw cs-8121
Thanks

Hi, Angela. MCE's offerings will do nicely as replacements for your Combo drive, and give you the option of burning DVDs as well as reading them. But you can pay less elsewhere for drives that will do as well, and performing the installation yourself is quite easy with the aid of the iFixit guide for your model. If you'd rather have the job done for you and the price isn't an obstacle, MCE is highly reliable.

Unable to install new driver for Quadro 4000

Hello
downloaded the new version 304.00.05f05 for quadro 4000. unable to install the new driver for NVIDIA Quadro 4000.
By clicking on the DMG I get a message "high-os-title high-os-message superimposed on the installer window
old NVIDIA driver already installed ; CUDA updated automatically to version 5.0.45
OS : Mountain lion
anywhere button activated in security window
Please help

Try downloading the update again. Perhaps the one you have got corrupted during the download process.
You can install updates in the Safe Mode and it should eliminate the possibility of other software interfering with the update process.
Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem.
Safe Mode
Safe Mode - About

I have a late 2009 iMac, with a Nvidia 9400 Graphics card. I was wondering what my options are for upgrading. I use Windows 7 via Bootcamp, so I need a card that is compatible.

I have a late 2009 iMac, with the default Nvidia 9400 Graphics card.
I was wondering what my options are for upgrading. I use Windows 7 via Bootcamp, so I need a card that is compatible/has available drivers.
This is for gaming. On the lowest settings of "Call of Duty 4", I get about 100 FPS... Was hoping to be able to play on higher resolution w/o the fps lag.
I'm not good with the hardware part of computers at all, but know how to get around the OS.

In most cases the graphics cards in iMacs are Not upgradeable. They are usually soldered to the logic board. RAM is considered, along with harddrives, the only component that is upgradeable in an iMac, unlike in PC's. So basically you would need to sell your unit and purchase an iMac with a more powerful graphics card.
Hope this helps

Re: Satellite A210-16F: Where to get newer driver for graphic card??

Hi!
I have a Satellite A210-16F laptop with a Ati Mobility Radeon HD 2600 graphic card...
After checking my device manager i found out that my graphic drivers are from 2007 which can't be good :S but for the life of me i can't find the right drivers anywhere... if you check out the screenshot, you will see that the drivers are from 2007 and after i click on "update driver" and then "search automatically for updated driver software" it never finds anything and tells me that my drivers are up-to-date :SS Any help would be greatly appreciated!!!
Oh, also, my OS is Vista Home Premium (32-bit)
Thank you!
http://img269.imageshack.us/img269/3407/61265269.jpg

One solution for your problem is, that if you upgraded your OS to Windows 7, there's a new driver for Mobility Radeon 2000 Series (Catalyst 9.6) on the ATI/AMD driver page(that one with the OS selector etc..). It's states however, that these drivers are for 7's beta releases only, but if you install them even on regular Win7 system, they're working fine and after a while an update for them appears in Windows update(It should update to Catalyst 9.7). I run them almost a week without a problem and it even resolved my Mass Effect 2 crashing issue.
One problem remains though that the driver is only for Win7(when you select Vista, it's really annoying: "Please contact your device driver manufacturer..." for you.).
It's truly more annoying than sad, that Toshiba, although in the Win7 supported laptop models list states that P200/A200 series are supported, the only thing supported after all seems to be a bluetooth module(since only that one got a new driver). So far there was no problem with an old display driver for 2600, but recently the new Mass Effect 2 crashes almost randomly during loading stages(with error log in computer management stating that the faulting module is ATI(anything here), and I only expect more such errors/problems with new games to come, because almost 2 years old drivers! So I think guys in Toshiba software engineering should really wake up.

Need driver for Nvidia Geforce Go 6150 for Windows 7

Hi, can anyone please tell me where I can download the driver for Nvidia Geforce Go 6150 for Windows 7. I have tried the drivers for Windows Vista but it does not work. Thanks in advance.

I followed this tutorial after installing Win7 on a friend's HP Pavilion tx1332LA (the tutorial is in Spanish):
http://www.taringa.net/posts/ebooks-tutoriales/2570715/NVIDIA-nForce-Chipset-Driver-(windows-7-_-vista).html
And since the coprocessor was no longer listed as an unknown device (or something similar), I assumed everything worked correctly afterwards... is that alright or do I have to check in some other way?
Well, here is a part of what the tutorial says (what was enough for me):
-Should work for 32-bits and 64-bits versions (I installed it on Windows 7 x64).
-First of all, we see that in the Device Administrator, there is an unknown device, a coprocessor. That's because Windows 7 can't find its driver.
-Download and install the following:
NVIDIA nForce Chipset Driver
ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39535.exe
and see if the coprocessor is recognized.
-If not, go to the Device Administrator and find the unrecognized coprocessor.
-Right-click on it and select Update driver...
-Select browse my computer -> let me pick -> have disk (this is what the tutorial says, it wasn't exactly the same for me, but I eventually got to pick a folder on my hard drive)
-Browse and select the following (assuming C represents the drive where everything from the file above got unpacked):
C:\swsetup\SP39535\WinVista32\SMU\smuc.inf (for 32-bits version)
C:\swsetup\SP39535\WinVista64\SMU\smuc64.inf (for 64-bits version)
Note: That is what the tutorial says, but I could only select the SMU folder and not a specific file. After selecting the SMU folder, a driver was automatically listed, I selected it and it got installed.
-Now, the coprocessor should be recognized (check the Device Manager).
Hope it helps!
Pixzeto
(PD: HP, the graphical editor on this forum sucks on Opera 10.01)

Nouveau driver (OSS 3D driver for Nvidia)

I have tried to make packages for the nouveau driver with success, but would like feedback from other users before submitting them to AUR.
To keep things clean and maintanable, i decided to create 3 packages :
nouveau-git ---- the kernel modules
libdrm-nouveau-git ---- userspace part that replaces libdrm
xf86-video-nouveau-git ---- the driver itself (the easiest package)
nouveau-git
# Contributor : Lone_Wolf [email protected]
pkgname=nouveau-git
pkgver=20061126
pkgrel=1
pkgdesc="Kernel modules for nouveau driver"
url="http://nouveau.freedesktop.org/wiki/"
license=('GPL')
depends=(glibc)
sources=()
md5sums=()
options=('NOLIBTOOL')
install=nouveau-git.install
_kernver=2.6.18-ARCH
# GIT variables
_gitroot="git://anongit.freedesktop.org/git/mesa/drm/"
_gitname="drm"
build() {
mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm
cd $startdir/src
msg "Connecting to git.freedesktop.org GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git-pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
cd ${_gitname}-build
git checkout nouveau-1
# ./autogen.sh
# ./configure --prefix=/usr
# make ||return 1
# make DESTDIR=$startdir/pkg install
cd linux-core
make ||return 1
# install drm.ko and nouveau.ko kernel modules
# drm.ko is renamed to drm-nouveau.ko to avoid problems with the existing drm.ko module
install -D -m644 drm.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/drm-nouveau.ko
install -D -m644 nouveau.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/nouveau.ko
nouveau-git.install
# arg 1: the new package version
post_install() {
KERNEL_VERSION='2.6.18-ARCH'
depmod -v $KERNEL_VERSION > /dev/null 2>&1
echo ">>>"
echo ">>> Make sure you have installed the xf86-video-nouveau-git package also"
echo ">>> To make this work execute the following as root :"
echo ">>> rmmod nvidia"
echo ">>> modprobe drm
echo ">>> modprobe -o --drm drm-nouveau"
echo ">>> modprobe nouveau"
echo ">>>"
echo ">>> Now edit your /etc/X11/xorg.conf to use the nouveau driver:"
echo ">>> Change in Section "Device" the Driver line to Driver "nouveau" "
echo ">>>"
echo ">>> Now start Xorg and run for cover !! "
echo ">>>"
/bin/true
# arg 1: the new package version
# arg 2: the old package version
post_upgrade() {
post_install $1
rmmod drm-nouveau || echo 'In order to use the new nvidia module, exit Xserver and unload it manually.'
# arg 1: the old package version
post_remove() {
KERNEL_VERSION='2.6.18-ARCH'
depmod -v $KERNEL_VERSION > /dev/null 2>&1
op=$1
shift
$op $*
libdrm-nouveau-git
# Contributor : Lone_Wolf [email protected]
pkgname=libdrm-nouveau-git
pkgver=20061126
pkgrel=1
pkgdesc="Userspace interface for nouveau driver"
url="http://nouveau.freedesktop.org/wiki/"
license=('GPL')
depends=('glibc' 'nouveau-git')
conflicts=('libdrm')
provides=('libdrm')
sources=()
md5sums=()
options=('NOLIBTOOL')
# GIT variables
_gitroot="git://anongit.freedesktop.org/git/mesa/drm/"
_gitname="drm"
build() {
mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm
cd $startdir/src
msg "Connecting to git.freedesktop.org GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git-pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
cd ${_gitname}-build
git checkout nouveau-1
./autogen.sh
./configure --prefix=/usr
make ||return 1
make DESTDIR=$startdir/pkg install
xf86-video-nouveau-git
# Contributor : Lone_Wolf [email protected]
pkgname=xf86-video-nouveau-git
pkgver=20061126
pkgrel=1
pkgdesc="OSS 3D driver for nvidia cards"
url="http://nouveau.freedesktop.org/wiki/"
license=('GPL')
depends=('libdrm-nouveau-git' 'glibc')
source=()
md5sums=()
options=('NOLIBTOOL')
_gitroot="git://anongit.freedesktop.org/git/nouveau/xf86-video-nouveau/"
_gitname="xf86-video-nouveau"
build() {
cd $startdir/src
msg "Connecting to git.freedesktop.org GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git-pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
cd ${_gitname}-build
./autogen.sh
./configure --prefix=/usr
make ||return 1
make DESTDIR=$startdir/pkg install

Hi
I've just get the nouveau driver installed successfully. But i had to tweak some things in your PKGBUILDS.
here you'll found the PKGBUILD i finally got.
nouveau-git (i hadn't git installed before compiling)
# Contributor : Lone_Wolf [email protected]
pkgname=nouveau-git
pkgver=20061126
pkgrel=1
pkgdesc="Kernel modules for nouveau driver"
url="http://nouveau.freedesktop.org/wiki/"
license=('GPL')
depends=(glibc)
makedepends=('git')
sources=()
md5sums=()
options=('NOLIBTOOL')
install=nouveau-git.install
_kernver=2.6.18-ARCH
# GIT variables
_gitroot="git://anongit.freedesktop.org/git/mesa/drm/"
_gitname="drm"
build() {
mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm
cd $startdir/src
msg "Connecting to git.freedesktop.org GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git-pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
cd ${_gitname}-build
git checkout nouveau-1
# ./autogen.sh
# ./configure --prefix=/usr
# make ||return 1
# make DESTDIR=$startdir/pkg install
cd linux-core
make ||return 1
# install drm.ko and nouveau.ko kernel modules
# drm.ko is renamed to drm-nouveau.ko to avoid problems with the existing drm.ko module
install -D -m644 drm.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/drm-nouveau.ko
install -D -m644 nouveau.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/nouveau.ko
libdrm-nouveau-git: nothing to change
xf86-video-nouveau-git: faced 2 problems when trying to build this package: · Missing xf86driproto (so added to makedepends). · Compilation failure when trying to build the manpage. I edit the PKGBUILD with a dirty hack to avoid manpage compilation.
# Contributor : Lone_Wolf [email protected]
pkgname=xf86-video-nouveau-git
pkgver=20061126
pkgrel=1
pkgdesc="OSS 3D driver for nvidia cards"
url="http://nouveau.freedesktop.org/wiki/"
license=('GPL')
depends=('libdrm-nouveau-git' 'glibc')
makedepends=('xf86driproto')
source=()
md5sums=()
options=('NOLIBTOOL')
_gitroot="git://anongit.freedesktop.org/git/nouveau/xf86-video-nouveau/"
_gitname="xf86-video-nouveau"
build() {
cd $startdir/src
msg "Connecting to git.freedesktop.org GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git-pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
cd $startdir/src/${_gitname}-build
##### Avoid manpage compilation #####
mv Makefile.am Makefile.am.old
cat Makefile.am.old | sed -e 's/SUBDIRS = src man/SUBDIRS = src/g' > Makefile.am
mv configure.ac configure.ac.old
cat configure.ac.old | sed -e 's/XORG_MANPAGE_SECTIONS/# XORG_MANPAGE_SECTIONS/g' | sed -e 's/man/Makefile//g' > configure.ac
##### End of hack #####
./autogen.sh
./configure --prefix=/usr
make || return 1
make DESTDIR=$startdir/pkg install
here are my 2cents

HT1338 Why doesn't "Software Update" show me the new driver for the Epson 50C20D (Artisan 800) while It is on the list of available new driver?

Since I upgraded to mountain lion, my Artisan printer stopped working. After talking to Epson and trying all kind of things, it was determined its definitely a driver problem. The PC ping the printer well but won;t print to it as it think its not connected (when it is as priven by the ping).
The new driver for Epson 50C20D are on the list of update available drivers on the OS X wen site yet trigering "Software Update" does does detect I need it... Why is that? Thanks

Thanks Mende1. The printer is there and installed allright. Even shows as "idle" until I try to print to it. The driver version shows 6.36 and I ned to update to 9 which is only avail from the App store... However, the app store don't detect I need it..

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

Go to: > http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_pri nters/imageclass_lbp6000#DriversAndSoftware
It does not look like the Canon driver has change from Mavericks to Yosemite.
If you just updated from Mavercks to Yosemite, see > OS X Mavericks: Reset the printing system
If you have a new or clean install of Yosemite, see > OS X Mavericks: Set up a printer

Satellite L450D - Need Wireless driver for Linux system

Hi,
I have a satellite L450D, with a Realtek RTL8191SE wireless card (windows 7). I use Linux for college and i can't get on the internet when i use linux cause the oporating system dose not find my wireless card.
When i check from command line for wireless cards, it shows that there are non.
I know other people that had this problem and basically i need a driver for it.
Can any one let me know what driver i need or where to get it? I would really appriciate this as i need to use Linux for college.
Thanks

Hi
I googled a little bit and found some tips in the internet.
It seems that there is no Linux driver for Realtek WLan card rtl8191se and rtl8192se.
Bu someone has managed the WLan installation by installing ndiswrapper from synaptic in Ubuntu + GUI. He downloaded the W2K driver net8192se.sys and net8192se.inf.
The W2k driver work but the combination driver W2Kxp or the xp or vista doesnt work.
After that you can use WPA because WEP encryption is not supported

New Driver for Audigy 2 NX - No 44.1Khz output ?

I installed the latest driver(.0.0099 - 26-Feb-0) for my Audigy 2 NX soundcard running on Windows 7. This the first time I am using the NX on Windows 7.
Everything is working fine, except I notice that in the "Output Rate" dropdown selection (that appears in the Windows "Advanced" tab under Properties of the playback device) there is no option for 6bit 44.Khz. The lowest is 48Khz. So does this mean a 44.Khz signal will always get resampled to 48Khz ? This is for the *analog* output only, not digital(spdif).

Re: New Driver for Audigy 2 NX - No 44.Khz output ?Hi dudl
My name is Felippe from Brazil. I bought an use Audigy 2 NX, that didn?t come with the Instalation and Applications CD. So I started looking for the drivers and applications to install. I installed the beta driver. I managed to install the sound card with it. The problem is the applications. Some of them I did the download (wave studio, creative mediaplayer), but the EAX CONSOLE I couldn?t install. So I tryed to install the Support Pack 3.8 that you published, with no success. The error code is "-6003". As I do not know much about computers, I ask you to help me. I work with music, voice recording, and EAX CONSOLE is really useful, since I do not know any program to replace. Well, I wait your response as soon as possible. Thank you. Felippe
PS: Sorry about my english, ok?!
PS2: You can answer trought the following email: [url="mailto:[email protected]">felippef [email protected][/url]

Satellite 1000-Z2: I need a driver for the display and the LAN

Hi
I have reformatted my laptop S1000-Z2, and I am having real trouble trying to find any information on this model !
Basically I need a driver for the display, and the LAN ?
Best Regards,
Austin.

What OS do you use???
If you use the XP you will not find the LAN driver on the recommended driver site!
I can not give you any advices where to find such driver because I dont know what LAN card is installed in your oldie.
But why you dont check this yourself? Try to find out what LAN card you use and googel a little bit for compatible applications ;)

Need new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

Similar Messages

Maybe you are looking for