Need NFS help... getting hangs on write

Hi all.
I'm having major problems with getting an NFS export to operate correctly for clients. I shared a dir over NFS, exported to subnet/mask, maproot to all. Right now it mounts ok, and users can read the files perfectly. But if you try to write at all it will immediately fail.
My logs start coming up with:
kernel[0]: nfs server server:/Volumes/drive: not responding
and this repeats about 20 times total. Amidst those this block appears:
KernelEventAgent[31]: tid 00000000 received VQ_NOTRESP event (1)
KernelEventAgent[31]: tid 00000000 type 'nfs', mounted on '/server/drive', from 'server:/Volumes/drive', not responding
KernelEventAgent[31]: tid 00000000 found 1 filesystem(s) with problem(s)
The disconnect drive window eventually pops up which stops the repetitions with this final message:
KernelEventAgent[31]: tid 00000000 unmounting 1 filesystems
I have no idea what to do here. On another xserve (a cluster), I tested NFS export the same way which worked fine. Granted, no other services were active.
Does anyone know what this is, or have any advice on how to get it working properly?
Mac OS X (10.4.6)

Hm... our network is running with jumbo frames... i will check to see if these larger frame sizes dont have something to do with the problem.
It's a good start at least.
As for the ports... yeah, the system is behind a network firewall, so all internal firewalls are down and shouldnt be affecting this traffic.

Similar Messages

Need some help getting my G5 "SCSI" compatible

Aloha:
I need some help getting my G5 to work with my SCSI scanner.
It has been suggested that I use an Adaptec PowerDomain 29160N to connect my Lacie SilverScanner III scanner, which is SCSI.
http://www.adaptec.com/en-US/products/mac/scsi/APD-29160N/
Does anyone have any experience with this unit or another SCSI adaptor that may be of help.
I have a G5 using OS 10.4.8
Any help would sure be of use!
Thanks
Dan Page
Maui, Hawaii

Dan Page-
I've not used this card, but a quick scan of the web page says that it is compatible with Mac OSX 10.3.X. You may want to contact them to verify that it will work with your system.
Luck-
-DaddyPaycheck

Need some help getting my logic express 7 to work!

alright so....i bought logic express 7 about 3 years ago and i HAVE NEVER USED IT! the reason being is because i could never get it to work and gave up 3 yrs ago. i just recently came across again while cleaning out my closet...i tried again but it still wont work...i think it says i need logic express 6 in order to get it work. is this true???? if so, where can i get logic express 6? i've searched everywhere and i can't seem to find it!
can someone please help me out?? i don't want it to go to waste! please?
thanx.
-smitty

sorry disregard...i just saw the sticker that says upgrade for express...idiot!

Poor student in desperate need of help getting my Adam 4017 and 18 units functioning!!

Thought I was getting a great deal. Like the loggers. Have them hooked up but I can not link to any program. Grant it I am a novice when it comes to these things. Im a microbiologist looking for bacteria that makes electric not a programmer.
I need the most cost effective way to record data off of these loggers. Im supposesd to begin a project on friday. Dasylab? Anything. If I can just collect the numbers in a folder I can process.
Please help.
Thanks

DASYLab 13 includes an ADAM module that should work with those units.
You do need to ensure that they are configured correctly, and have unique unit ids, and that they are wired correctly. Documentation should be available on the Advantech site.
You can download the DASYLab 13 evaluation from www.dasylab.com. Choose the Evaluation mode, and select the ADAM driver under the Data Acquisition packages.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Help getting the XPS writer working.

Win7 ... the MS XPS Document writer has never worked well. Today I uninstalled the feature and reinstalled it (to no avail).
If I try from Outlook, I get a simple message box ... "Printer not ready".
From Notepad, a message box ... "The parameter is incorrect"
From Excel, an elaborate message box starting with "... could not be printed in the MS XPS Doc Writer on e00 ..."
From Winword, I get nothing at all, including no XPS file.
From IE, I get ... Internet Explorer (not responding)
From the Windows Photo Viewer ... it works!
Help!
Thanks.   - Vince

With a utility of my own, I searched the registry (key names, values, data) for strings containing "xps" (case-insensitive on two machines ... one (work) where printing to XPS works, and the other (home) about which I have been complaining. Much is
the same but there are striking differences.
The home machine, where printing to XPS doesn't work, has these classes which are completely non-existent on the machine where printing to XPS works. In fact, "xpsprint.dll" is not mentioned in the registry of the machine on which printing to XPS works.
HKCR\CLSID\{348ef17d-6c81-4982-92b4-ee188a43867a}\InProcServer32
   Value:
->   Data: %SystemRoot%\System32\XpsPrint.dll
HKCR\CLSID\{E1553E07-5939-4CFD-BE24-3BCEBA2F148C}\InProcServer32
    Value:
->   Data: %SystemRoot%\System32\XpsPrint.dll
And the second of these (below, "7.1") does not exist on the machine where printing to XPS works.
-> HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\x86_microsoft-windows-printing-xpsprint_31bf3856ad364e35_none_1c8562f614ed785a\6.1
-> HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\x86_microsoft-windows-printing-xpsprint_31bf3856ad364e35_none_1c8562f614ed785a\7.1
-> HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide\Winners\x86_microsoft-windows-printing-xpsprint_31bf3856ad364e35_none_1c8562f614ed785a
The registry keys which exist on the problematic machine have a time stamp of 2013-11-17, the day on which I instelled IE11 (which required 10 other updates which I'll try to investigate).
If the installation of IE11 is the culprit, I gotta laugh ... some apps can print to XPS, some can't, but IE11 is special ... it goes ballistic (not responding).
Any thoughts?

[SOLVED] Need some help getting the sound to work again

Recently I changed the motherboard and CPU to an AM3 platform, everything works with my previous setup except sound.
Reinstalling alsa-utils and rebooting had absolutely no effect. Google didn't help either.
lspci -v
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 8415
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at dfff4000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel modules: snd-hda-intel
The motherboard documentation refers to it as "VIA VTI708S".
VLC complains about alsa-lib. Reinstalling it also didn't help.
aplay /usr/share/sounds/alsa/Front_Center.wav
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4633:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:654: audio open error: No such file or directory
alsamixer
cannot open mixer: No such file or directory
Edit:
Damn ASUS font... It's "VIA VT1708S" (number one, not the letter "i") ! Duh. No wonder Google couldn't find any info.
Still, any ideas ? Or would you just rather let me squirm a little and diagnose the problem myself ?
Last edited by DSpider (2010-11-28 18:15:41)

sudo modprobe snd-hda-intel
(I think it's what you tried to tell me, igndenok)
Great. It took the bulk of my day trying to figure out how to get this thing to work.
VolWheel is now set to adjust "Master Front" (it was previously set to "Master" with the old motherboard) and the Sonata volume bar apparently works too, just like I wanted (adjusting the PCM volume by default). Good. Great ! Now I just need to set the "snd-hda-intel" module to load at boot so I don't have to type "sudo modprobe snd-hda-intel" all the time and this thread can be considered SOLVED.
sudo nano /etc/rc.conf
...and add the following:
MODULES="... snd-hda-intel ..."
(also removed snd-ac97-codec from the list because that's what the old mobo used)
THANKS FOR ALL YOUR HELP !
PS: Just out of curiosity, why is it called "snd-hda-intel" ? Why intel ? The CPU is AMD, the chipset is Nvidia nForce, sound is VIA...
Anyone know ? I'll subscribe to this topic just in case anyone knows. Thanks again.
Last edited by DSpider (2010-11-28 18:16:36)

Need NFS help

I've followed the guide from the ubuntu documentation here https://help.ubuntu.com/community/SettingUpNFSHowTo . I've followed the guides for NFS and NFSv4 in the arch wiki. I've tried a combination of all of them. Everything seems to being as planned up until I actually try to mount the share. Everytime I get this...
"mount.nfs4: mounting boxee-server:/home/boxee failed, reason given by server:
No such file or directory"
All I want to do is be able to set my torrent program to transfer the files to my boxee-server once they're done downloading. This is becoming way harder than it should be. This is certainly not a reason to praise windows, but it's frustrating that I could have this done in windows in 30 seconds.

# /etc/exports: the access control list for filesystems which may be exported
# to NFS clients. See exports(5).
# Example for NFSv2 and NFSv3:
# /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check)
# Example for NFSv4:
# /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check)
# /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check)
/export kellen-desktop(rw,fsid=0,insecure,no_subtree_check,async)
/export/boxee kellen-desktop(rw,nohide,insecure,no_subtree_check,async)

Need some helping getting safari up

OK a friend just got her Mac, the cable internet guy just spent 4 hours at her house trying to get her online. The moden is getting a signal, he doesn't knwo how to get the mac to acquire. I didn't have this issue when setting up mine, and I am not in front of my machine to walk her through it. Will she need to set up an account first, shouldn't she be able to see the cable network? On my machine I just plugged in the line and I was on the net in 3 seconds..????
Can anyone walk me through this to help her get set-up,

Network connection problems can be buggers.
Go to the Network panel in System Preferences
Click on the drop down menu next to Show> Select "network port configuration". Make sure her cable type (Ethernet or Airport) is selected. If it was unchecked, she found her problem. If checked:
Have her open Safari. The page will say "cannot connect etc." with a box below for Network Configuration. Select it and see if the internal help function can make the connection work.
Post back

New to sun/unix need some help getting my solaris express developers workin

well it installed, detected my dvd but during the install process I was not asked any networking questions. I figured perhaps it meant I had to configure that after the fact but alas it says the network admin can't configure the network because the network auto-magic is configured. whatever that means...well I guess it means my ethernet was not found? also a right click screen resolution only gives my 50hz refresh rate and 640x480 so I am guessing that means my video card is not detected either? I have an asus 800se motherboard with built in graphics and ethernet so I guess I will need to get 2 pci cards?
well if so I started to look at the very large hardware list and my head started spinning. so my question is...can anyone here suggest both an older video and ethernet card that I might say be able to find on ebay? because I really don't need anything fancy I am must out to learn sun...old but good and reliable???
thank you.

extendedping wrote:
well it installed, detected my dvd but during the install process I was not asked any networking questions. I figured perhaps it meant I had to configure that after the fact but alas it says the network admin can't configure the network because the network auto-magic is configured. whatever that means...Please see the rest of the message on the network issue:
Please see the nwamd(1M) manpage for more information on
how to configure the system in this operational state.
More information is also available at:
http://www.opensolaris.org/os/project/nwam/phase0/
Did you do a "man nwamd" to see the instructions on what you can do?
-- Alan

Need some help getting add/remove field buttons working

Someone here on the forums had previously assisted me with getting a button set up on a form that would add an additional text field to a form. I now need a separate button created that will delete a text field in case too many were added. I am hoping that someone can assist me with this since my XML knowledge is pretty much nil. It doesn't look like I can upload files to the forum here, so I am going to attempt to paste my code. I just need to get the "-" button to subtract a row. Thanks in advance for the assistance.
-Chris
<?xml version="1.0" encoding="UTF-8"?>
<?xfa generator="AdobeLiveCycleDesignerES_V8.2.1.4029.1.523496" APIVersion="2.8.9029.0"?>
<xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" timeStamp="2010-06-28T16:04:04Z" uuid="081329f3-4914-4dde-87ae-75a83da8434e">
<template xmlns="http://www.xfa.org/schema/xfa-template/2.6/">
   <?formServer defaultPDFRenderFormat acrobat8.1static?>
   <subform name="form1" layout="tb" locale="en_US">
      <pageSet>
         <pageArea name="Page1" id="Page1">
            <contentArea x="19.05mm" y="12.7mm" w="190.5mm" h="266.7mm"/>
            <medium stock="default" short="612pt" long="792pt"/>
            <?templateDesigner expand 1?></pageArea>
         <?templateDesigner expand 1?></pageSet>
      <subform w="7.5in" h="10.5in" name="Page1">
         <subform w="174.625mm" y="79.377mm" name="Current_Objectives" layout="tb">
            <subform w="174.625mm" h="9.522mm" name="Objective">
               <field name="txt_currobj" minH="8.263mm" w="174.625mm">
                  <ui>
                     <textEdit multiLine="1">
                        <border>
                           <?templateDesigner StyleID aped3?>
                           <edge stroke="lowered"/>
                        </border>
                        <margin/>
                     </textEdit>
                  </ui>
                  <font size="11pt" typeface="Verdana"/>
                  <margin topInset="1mm" bottomInset="1mm" leftInset="1mm" rightInset="1mm"/>
                  <para vAlign="middle"/>
                  <caption reserve="7.76mm">
                     <para vAlign="middle"/>
                     <value>
                        <text>1.</text>
                     </value>
                     <font size="11pt" typeface="Verdana"/>
                  </caption>
                  <event activity="initialize" name="event__initialize">
                     <script contentType="application/x-javascript">this.caption.value.text.value = (this.parent.index + 1) + "."
</script>
                  </event>
               </field>
               <occur max="-1"/>
               <?templateDesigner expand 1?></subform>
            <field h="5.08mm" name="curr_obj_add_line" w="5.08mm">
               <ui>
                  <button highlight="push"/>
               </ui>
               <font typeface="Arial"/>
               <caption>
                  <value>
                     <text>+</text>
                  </value>
                  <para hAlign="center" vAlign="middle"/>
                  <font typeface="Arial"/>
               </caption>
               <border hand="right">
                  <edge stroke="raised"/>
                  <fill>
                     <color value="212, 208, 200"/>
                  </fill>
                  <?templateDesigner StyleID apbx2?></border>
               <bind match="none"/>
               <assist>
                  <toolTip>Add an item</toolTip>
               </assist>
               <event activity="click" name="event__click">
                  <script contentType="application/x-javascript">
_Objective.addInstance(1)
</script>
               </event>
            </field>
            <field h="5.08mm" name="curr_obj_del_line" w="5.08mm">
               <ui>
                  <button highlight="push"/>
               </ui>
               <font typeface="Arial"/>
               <caption>
                  <value>
                     <text>-</text>
                  </value>
                  <para hAlign="center" vAlign="middle"/>
                  <font typeface="Arial"/>
               </caption>
               <border hand="right">
                  <edge stroke="raised"/>
                  <fill>
                     <color value="212,208,200"/>
                  </fill>
                  <?templateDesigner StyleID apbx2?></border>
               <bind match="none"/>
               <assist>
                  <toolTip>Delete an item</toolTip>
               </assist>
               <event activity="click" name="event__click">
                  <script contentType="application/x-javascript">
_Objective.deleteInstance(1)
</script>
               </event>
            </field>
            <?templateDesigner expand 0?></subform>
         <?templateDesigner expand 1?></subform>
      <desc>
         <text name="version">8.2.1.4029.1.523496.503679</text>
      </desc>
      <?templateDesigner expand 1?></subform>
   <?templateDesigner DefaultLanguage FormCalc?>
   <?templateDesigner DefaultRunAt client?>
   <?acrobat JavaScript strictScoping?>
   <?templateDesigner Zoom 100?>
   <?templateDesigner Grid show:1, snap:1, units:0, color:ff8080, origin:(0,0), interval:(125000,125000)?>
   <?templateDesigner FormTargetVersion 26?>
   <?templateDesigner SaveTaggedPDF 1?>
   <?templateDesigner SavePDFWithEmbeddedFonts 1?>
   <?templateDesigner Rulers horizontal:1, vertical:1, guidelines:1, crosshairs:0?></template>
<config xmlns="http://www.xfa.org/schema/xci/2.6/">
   <agent name="designer">
      <destination>pdf</destination>
      <pdf>
         
         <fontInfo/>
      </pdf>
   </agent>
   <present>
      
      <pdf>
         
         <version>1.7</version>
         <adobeExtensionLevel>1</adobeExtensionLevel>
      </pdf>
      <common/>
      <script>
         <runScripts>server</runScripts>
      </script>
      <xdp>
         <packets>*</packets>
      </xdp>
   </present>
   <?originalXFAVersion http://www.xfa.org/schema/xci/2.8/?></config>
<localeSet xmlns="http://www.xfa.org/schema/xfa-locale-set/2.6/">
   <?originalXFAVersion http://www.xfa.org/schema/xfa-locale-set/2.6/?>
   <locale name="en_US" desc="English (United States)">
      <calendarSymbols name="gregorian">
         <monthNames>
            <month>January</month>
            <month>February</month>
            <month>March</month>
            <month>April</month>
            <month>May</month>
            <month>June</month>
            <month>July</month>
            <month>August</month>
            <month>September</month>
            <month>October</month>
            <month>November</month>
            <month>December</month>
         </monthNames>
         <monthNames abbr="1">
            <month>Jan</month>
            <month>Feb</month>
            <month>Mar</month>
            <month>Apr</month>
            <month>May</month>
            <month>Jun</month>
            <month>Jul</month>
            <month>Aug</month>
            <month>Sep</month>
            <month>Oct</month>
            <month>Nov</month>
            <month>Dec</month>
         </monthNames>
         <dayNames>
            <day>Sunday</day>
            <day>Monday</day>
            <day>Tuesday</day>
            <day>Wednesday</day>
            <day>Thursday</day>
            <day>Friday</day>
            <day>Saturday</day>
         </dayNames>
         <dayNames abbr="1">
            <day>Sun</day>
            <day>Mon</day>
            <day>Tue</day>
            <day>Wed</day>
            <day>Thu</day>
            <day>Fri</day>
            <day>Sat</day>
         </dayNames>
         <meridiemNames>
            <meridiem>AM</meridiem>
            <meridiem>PM</meridiem>
         </meridiemNames>
         <eraNames>
            <era>BC</era>
            <era>AD</era>
         </eraNames>
      </calendarSymbols>
      <datePatterns>
         <datePattern name="full">EEEE, MMMM D, YYYY</datePattern>
         <datePattern name="long">MMMM D, YYYY</datePattern>
         <datePattern name="med">MMM D, YYYY</datePattern>
         <datePattern name="short">M/D/YY</datePattern>
      </datePatterns>
      <timePatterns>
         <timePattern name="full">h:MM:SS A Z</timePattern>
         <timePattern name="long">h:MM:SS A Z</timePattern>
         <timePattern name="med">h:MM:SS A</timePattern>
         <timePattern name="short">h:MM A</timePattern>
      </timePatterns>
      <dateTimeSymbols>GyMdkHmsSEDFwWahKzZ</dateTimeSymbols>
      <numberPatterns>
         <numberPattern name="numeric">z,zz9.zzz</numberPattern>
         <numberPattern name="currency">$z,zz9.99|($z,zz9.99)</numberPattern>
         <numberPattern name="percent">z,zz9%</numberPattern>
      </numberPatterns>
      <numberSymbols>
         <numberSymbol name="decimal">.</numberSymbol>
         <numberSymbol name="grouping">,</numberSymbol>
         <numberSymbol name="percent">%</numberSymbol>
         <numberSymbol name="minus">-</numberSymbol>
         <numberSymbol name="zero">0</numberSymbol>
      </numberSymbols>
      <currencySymbols>
         <currencySymbol name="symbol">$</currencySymbol>
         <currencySymbol name="isoname">USD</currencySymbol>
         <currencySymbol name="decimal">.</currencySymbol>
      </currencySymbols>
      <typefaces>
         <typeface name="Myriad Pro"/>
         <typeface name="Minion Pro"/>
         <typeface name="Courier Std"/>
         <typeface name="Adobe Pi Std"/>
         <typeface name="Adobe Hebrew"/>
         <typeface name="Adobe Arabic"/>
         <typeface name="Adobe Thai"/>
         <typeface name="Kozuka Gothic Pro-VI M"/>
         <typeface name="Kozuka Mincho Pro-VI R"/>
         <typeface name="Adobe Ming Std L"/>
         <typeface name="Adobe Song Std L"/>
         <typeface name="Adobe Myungjo Std M"/>
      </typefaces>
   </locale>
</localeSet>
<x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="Adobe XMP Core 4.2.1-c041 52.337767, 2008/04/13-15:41:00        ">
   <rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
      <rdf:Description xmlns:xmp="http://ns.adobe.com/xap/1.0/" rdf:about="">
         <xmp:MetadataDate>2010-06-28T16:04:04Z</xmp:MetadataDate>
         <xmp:CreatorTool>Adobe LiveCycle Designer ES 8.2</xmp:CreatorTool>
         <xmp:ModifyDate>2010-06-28T11:28:54-04:00</xmp:ModifyDate>
         <xmp:CreateDate>2010-06-18T11:45:23-04:00</xmp:CreateDate>
      </rdf:Description>
      <rdf:Description xmlns:pdf="http://ns.adobe.com/pdf/1.3/" rdf:about="">
         <pdf:Producer>Adobe LiveCycle Designer ES 8.2</pdf:Producer>
      </rdf:Description>
      <rdf:Description xmlns:xmpMM="http://ns.adobe.com/xap/1.0/mm/" rdf:about="">
         <xmpMM:DocumentID>uuid:081329f3-4914-4dde-87ae-75a83da8434e</xmpMM:DocumentID>
         <xmpMM:InstanceID>uuid:4d9ea5d0-fbf1-4be5-8aa5-b9c828a765e9</xmpMM:InstanceID>
      </rdf:Description>
      <rdf:Description xmlns:dc="http://purl.org/dc/elements/1.1/" rdf:about="">
         <dc:format>application/pdf</dc:format>
      </rdf:Description>
      <rdf:Description xmlns:desc="http://ns.adobe.com/xfa/promoted-desc/" rdf:about="">
         <desc:version rdf:parseType="Resource">
            <rdf:value>8.2.1.4029.1.523496.503679</rdf:value>
            <desc:ref>/template/subform[1]</desc:ref>
         </desc:version>
      </rdf:Description>
   </rdf:RDF>
</x:xmpmeta>
<xfdf xmlns="http://ns.adobe.com/xfdf/" xml:space="preserve">
   <annots/>
</xfdf></xdp:xdp>

Hi,
The (1) is incorrect for the removeInstance.
In the addInstance script the (1) is for "true" - merge the new instance with the data model.
In the removeInstance you need to specify which instance you want to remove.
So in your button the script would look think this:
var vCount = _Objective.count - 1;
_Objective.removeInstance(vCount);
This counts the number of instances and then subtracts 1, because the instances are zero based.
I have also added a button within the repeating instance, which allows the user to select the instance they want to remove.
_Objective.removeInstance(this.parent.index);
The this.parent.index is telling Acrobat that the instance to delete is the one that the button is in.
Form is here: https://acrobat.com/#d=nn2Ubo6tq5TDEcrtnz-SCg
Good luck,
Niall

HELP! I'm new at this and need some help getting started

I am currently working on our website and was wondering how do I make a new page?
for example.
I want people to click on a link on the homepage to say a stockist list and see another page open with that information on.
Also I need to know how to make the homepage have white strips on the left and right (for an example of what I mean please visit www.internationalrobes.com)
I look forward to your replies!
Carly

Well, these are more web design related questions, but I will help as much as I can in the context.
Going about adding a page:
1) Navigate to Admin > Layout > Static pages
2) Add a new static page here and enter your content
3) Once it is saved, you should see an eyeglasses icon next to the page and you can copy that url and use it in a link.
4) For example
<a href="common/pagedetail.aspx?PageCode=test">My link here</a>
As far as the white stripes, I think you mean centering a page?
1) Edit the main master page under your theme
2) Center the content using css, more info here: [http://www.thesitewizard.com/css/center-div-block.shtml]
I think you would also benefit from the WebEx i created on implementing a layout into Webtools available here: [http://www.businessoneecommerce.com/developerdownloads/Implementing_a_Webtools_Theme.zip]

Need some help getting iTunes installed

I already know that I have a problem installing iTunes and its during the "publishing product information" part of the installation. I got my hands on a Windows XP Home Edition disc . . . I attempted to do the installation repair . . . part way through it I was asked to give the "administrators password" . . . this I do not know. After the third wrong password I was told that I needed to reboot and start over. I am trying to avoid the re-installing windows b/c of all the factory crap that I have on this comptuer.
Is there anyone out there that can break this down to me big bird and barney style?? I have been on the phone waiting to talk to someone at compaq from more than 80 mins now!!
Thanks
Puck

hi puckusmc!
I attempted to do the installation repair . . . part way through it I was asked to give the "administrators password" . . . this I do not know.
okay, it sounds like you've already found the correct KB doc for the "vanishing installation" problem:
http://docs.info.apple.com/article.html?artnum=300361
... so you're on the right track.
what administrative rights do you have on that PC?
if you don't have administrative rights, can you contact the administrator to get them to do the install for you?
love, b

I need some help getting flash player 10.2

I need to have an older version of flash because my SiteGrinder web software doesn't work with flash 10.3. Can anyone please give me a version of 10.2 or a valid link where I could get a copy of it? I would appreciate it.
Thank you

I just installed Camino 2.0.7 and Flash Player 10.2.159.1 but the Sitegrinder page you posted appears to load proplerly. The Youtube video appears and plays as expected. Do you also encounter issues with playback on Youtube itself?

Need some help getting my iTunes over to my new Mabook pro

Hi:
I am trying to populate the iTunes application on my new laptop with my song from my G5 desk top. I failed trying to burn the songs to a DVD. I needed three dvd's to hold all my songs. The process failed on disk one. But it did totally fill the disk with something as the is now worthless. it is not recognized by iDVD.
Help need some ideas.
Thanks
Dan Page
Maui, Hawaii

Hi:
Thank you for the reply, most appreciated.
Did you burn as a data disc? Yes, I used iTunes "file/back up to disc".
Why are you using iDVD to import you music?
I had to use a DVD because I have many songs.
The only error I got was that the first of three DVD's was not usable. I did not burn the next two.
Thanks
Dan Page

Need some help getting started

This is my occi.c (test file)
#include <occi.h>
main()
printf("hoho");
Compile it
gcc -I /u01/app/oracle/product/10.1.0/db_1/rdbms/public/ occi.c -o occi
In file included from /u01/app/oracle/product/10.1.0/db_1/rdbms/public/occi.h:39,
from occi.c:1:
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:125:18: string: No such file or directory
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:129:18: vector: No such file or directory
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:134:16: list: No such file or directory
In file included from /u01/app/oracle/product/10.1.0/db_1/rdbms/public/occi.h:39,
from occi.c:1:
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:145: error: syntax error before "oracle"
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:145: error: syntax error before '{' token
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:272: warning: data definition has no type or storage class
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:273: error: syntax error before "EnvironmentImpl"
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:273: warning: data definition has no type or storage class
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:274: error: syntax error before "Connection"
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:274: warning: data definition has no type or storage class
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:275: error: syntax error before "ConnectionImpl"
There is a lot more of the error messages.
What am I doing wrong? Or rather what is wrong? In this example I only include the header file and get lots of errors.
Message was edited by:
Marius

I think I found the mistake, at least it feels that I'm closer:
[oracle@akurei master]$ g++ -I/u01/app/oracle/product/10.1.0/db_1/rdbms/public/ -L/u01/app/oracle/product/10.1.0/db_1/lib -l occi10 occi.c -o occi
occi.c: In function `int main()':
occi.c:5: error: `Environment' undeclared (first use this function)
occi.c:5: error: (Each undeclared identifier is reported only once for each function it appears in.)
occi.c:5: error: `env' undeclared (first use this function)
occi.c:5: error: `Environment' has not been declared
occi.c:5: error: `createEnvironment' undeclared (first use this function)
occi.c:6: error: `Connection' undeclared (first use this function)
occi.c:6: error: `conn' undeclared (first use this function)
occi.c:9: error: `Statement' undeclared (first use this function)
occi.c:9: error: `stmt' undeclared (first use this function)
occi.c:32: error: `Environement' has not been declared
occi.c:32: error: `terminateEnvironment' undeclared (first use this function)
With this file:
#include <occi.h>
main()
Environment *env = Environment::createEnvironment();
Connection *conn = env->createConnection("marius","passord","orcl");
env->terminateConnection(conn);
Statement *stmt = conn->createStatement("INSERT INTO test(empno) VALUES(:1)");
int empno = 2;
stmt->setInt(1,empno);
stmt->executeUpdate();
Environement::terminateEnvironment(env);
I do not understand why environment is not declared. I though it should be as it is included through occi.h that include occiControl.h where it is declared.
Can anyone point me in the right direction.

Need NFS help... getting hangs on write

Similar Messages

Maybe you are looking for