Need No to activate reverse battery function.*#337...

Hi,I have read at one website that when battery power is too low then to make call we can activate reverse battery function.By that battery power increases to 50%.In next charging this reverse battery also get charged.The no is given as *#3370#. In my phone N82 its not working.
I have checked it on many phones but it does not work.As no must be wrong.
Can anyone plz tell me the exact no. To activate it.

If there isn't enough power in the battery to make a call then changing the audio codec to a lower quality isn't going to make a difference.
The whole thing was pure nonsense anyway. It didn't make any significant difference to power consumption because the main drain of power when making a call is the RF transmitter.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

Need to de-activate Actual cost component split

Hi All,
I need to de-activate Actual cost component split in the test client.
It has been activated by my testing associate by mistake.
Please let me know the do and donts if anyone has done this de-activation before.
I could not find any relevent OSS messages or consulting notes on this topic
We are using ML Actual Costing and Multi Currency - without actual cost component split.
Thanks in advance,
Regards,
Vik Sood

Hi Balram.
If you have access to an IDES system, you can see a Cost Component split like this:
As fas as I know, this is only for educational porpouses. In the standard System, its not recomended have the detail of the split per movement, due to the huge amount of data genereted. There is a Flag that control this, in a Txxx table (i dont have access to the system right now).
If you really want this functionality, write SAP in the marketplace, and I guess their response is exactly what im saying.
Arturo.

HT204291 How can I find password to Apple TV? I have forgotten password and need it to activate AirPlay. Thanks!

How can I find password to Apple TV? I have forgotten password and need it to activate AirPlay. Thanks!

Welcome to the Apple community.
Which password is it that you are looking for. If it is your airplay password, simply turn the password off in the airplay settings on the Apple TV and then turn it back on again and enter a new password.

Need to Re-activate CS4 after upgrade from Vista to Windows 7 (32 bit)

I have a laptop running Vista 32-bit with Lightroom 2.7 and Photoshop CS4 installed. I'm planning to upgrade the computer from Vista 32-bit to Windows 7 32-bit, upgrading in place to avoid having to reformat and reinstall all the software. Will Photoshop still be activated after the upgrade or will I need to re-activate it? If I need to reactivate, will the OS change make the activation process think the software has been moved to a new computer? It is currently activated on two machines (one of which is this laptop) as it is and don't want the activation wizard to think I'm putting it on third machine in violation of the license. Should I de-activate it before upgrading the OS and then re-activate once the system upgrade is complete? After the OS change I plan to upgrade the Adobe software to Lightroom 3 and PS CS5 - does the activation of CS4 even matter in that case? Anyone done a Vista->Win7 upgrade in place and offer any suggestions?

You are a brave man indeed, John.
An in-place upgrade is still a bad idea though.
-Noel

Need some help with the Table Function Operator

I'm on OWB 10gR2 for Sun/Solaris 10 going against some 10gR2 DB's...
I've been searching up and down trying to figure out how to make OWB use a Table Function (TF) which will JOIN with another table; allowing a column of the joined table to be a parameter in to the TF. I can't seem to get it to work. I'm able to get this to work in regular SQL, though. Here's the setup:
-- Source Table:
DROP TABLE "ZZZ_ROOM_MASTER_EX";
CREATE TABLE "ZZZ_ROOM_MASTER_EX"
( "ID" NUMBER(8,0),
"ROOM_NUMBER" VARCHAR2(200),
"FEATURES" VARCHAR2(4000)
-- Example Data:
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (1,'Room 1',null);
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (2,'Room 2',null);
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (3,'Room 3','1,1;2,3;');
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (4,'Room 4','5,2;5,4;');
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (5,'Room 5',' ');
-- Destination Table:
DROP TABLE "ZZZ_ROOM_FEATURES_EX";
CREATE TABLE "ZZZ_ROOM_FEATURES_EX"
( "ROOM_NUMBER" VARCHAR2(200),
"FEATUREID" NUMBER(8,0),
"QUANTITY" NUMBER(8,0)
-- Types for output table:
CREATE OR REPLACE TYPE FK_Row_EX AS OBJECT
ID NUMBER(8,0),
QUANTITY NUMBER(8,0)
CREATE OR REPLACE TYPE FK_Table_EX AS TABLE OF FK_Row_EX;
-- Package Dec:
CREATE OR REPLACE
PACKAGE ZZZ_SANDBOX_EX IS
FUNCTION UNFK(inputString VARCHAR2) RETURN FK_Table_EX;
END ZZZ_SANDBOX_EX;
-- Package Body:
CREATE OR REPLACE
PACKAGE BODY ZZZ_SANDBOX_EX IS
FUNCTION UNFK(inputString VARCHAR2) RETURN FK_Table_EX
AS
RETURN_VALUE FK_Table_EX := FK_Table_EX();
i NUMBER(8,0) := 0;
BEGIN
-- TODO: Put some real code in here that will actually read the
-- input string, parse it out, and put data in to RETURN_VALUE
WHILE(i < 3) LOOP
RETURN_VALUE.EXTEND;
RETURN_VALUE(RETURN_VALUE.LAST) := FK_Row_EX(4, 5);
i := i + 1;
END LOOP;
RETURN RETURN_VALUE;
END UNFK;
END ZZZ_SANDBOX_EX;
I've got a source system built by lazy DBA's and app developers who decided to store foreign keys for many-to-many relationships as delimited structures in driving tables. I need to build a generic table function to parse this data and return it as an actual table. In my example code, I don't actually have the parsing part written yet (I need to see how many different formats the source system uses first) so I just threw in some stub code to generate a few rows of 4's and 5's to return.
I can get the data from my source table to my destination table using the following SQL statement:
-- from source table joined with table function
INSERT INTO ZZZ_ROOM_FEATURES_EX(
ROOM_NUMBER,
FEATUREID,
QUANTITY)
SELECT
ZZZ_ROOM_MASTER_EX.ROOM_NUMBER,
UNFK.ID,
UNFK.QUANTITY
FROM
ZZZ_ROOM_MASTER_EX,
TABLE(ZZZ_SANDBOX_EX.UNFK(ZZZ_ROOM_MASTER_EX.FEATURES)) UNFK
Now, the big question is--how do I do this from OWB? I've tried several different variations of my function and settings in OWB to see if I can build a single SELECT statement which joins a regular table with a table function--but none of them seem to work, I end up getting SQL generated that won't compile because it doesn't see the source table right:
INSERT
/*+ APPEND PARALLEL("ZZZ_ROOM_FEATURES_EX") */
INTO
"ZZZ_ROOM_FEATURES_EX"
("ROOM_NUMBER",
"FEATUREID",
"QUANTITY")
(SELECT
"ZZZ_ROOM_MASTER_EX"."ROOM_NUMBER" "ROOM_NUMBER",
"INGRP2"."ID" "ID_1",
"INGRP2"."QUANTITY" "QUANTITY"
FROM
(SELECT
"UNFK"."ID" "ID",
"UNFK"."QUANTITY" "QUANTITY"
FROM
TABLE ( "ZZZ_SANDBOX_EX"."UNFK2" ("ZZZ_ROOM_MASTER_EX"."FEATURES")) "UNFK") "INGRP2",
"ZZZ_ROOM_MASTER_EX" "ZZZ_ROOM_MASTER_EX"
As you can see, it's trying to create a sub-query in the FROM clause--causing it to just ask for "ZZZ_ROOM_MASTER_EX"."FEATURES" as an input--which isn't available because it's outside of the sub-query!
Is this some kind of bug with the code generator or am I doing something seriously wrong here? Any help will be greatly appreciated!

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

My hard disk crashed and I cannot find out how to "contact customer service" other than this forum. The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive. Please help.

My hard disk crashed and I cannot find out how to "contact customer service" other than this forum. The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive. Please help.

Hi Anthony ,
Here is the link to connect with Adobe Chat Support.
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Hope your query gets resolved .
Regards
Sukrit Dhingra

I purchased Adobe Creative Suite C2 and have been using it for years on the same computer no problem with using it. Recently upon opening Photoshop I received a pop up window saying due to Adobe Software security we need you to activate your CS2 software.

I purchased Adobe Creative Suite C2 and have been using it for years on the same computer without any problems with using it. Recently upon opening Photoshop I received a pop up window saying due to Adobe Software security we need you to activate your CS2 software. I tried, phone activation, web activation, nothing is working. I have the serial number and my Adobe account information. Any suggestions?

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Mylenium

Q: i have recently aquired an iPhone 3GS and need iTunes do activate it.But iTunes wont download onto my computer

Q: i have recently aquired an iPhone 3GS and need iTunes do activate it.But iTunes wont download onto my computer. I am running Windows Vista Service Pack 2. Please HELP!!

I'd first try experimenting with a different browser. If you've been using IE for the download, try Firefox instead (or vice versa).
If no luck there, there's some other suggestions in the following document. (You're not getting the error message, but your problem here falls into the same general class of download trouble.)
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

The "reverse position" function for midi in the transform window does not seem to be working.

So I'm trying to have all of the notes of my midi region play in reverse order. I found out after some research that the way to do this is via the "reverse position" function in the transform window. I opened the parameters for this and it gave me an option to select "inside" a set of measure positions, so I set it to between measure 99 (99 1 1 1) and measure 172 (172 1 1 1) and tried to "select and operate." Nothing. Tried to select manually and then hit "operate." Nothing. I then changed the condition from "inside" to "all" and manually select, then hit "operate," and this time it showed "340 events in one midi region found" at the bottom of the window but still did nothing. I haven't manually counted the notes in the region but that seems like a fair estimate that it's the right number of notes (midi events).
Any idea why this function seems to do absolutely nothing?

((/MAIN/NODE1NODE2 = 'x') EX)
This means that the condition will eval to true or false ONLY if the node exists?
(Note: In the actual scenario, I have an IDOC and I wish to perform a similar check on a tag that may or may not exist depending
upon the situation).
If your requirement is to check if a node exists or not then below is the condition which you should be using:
Left Operand: /MAIN/NODE1/NODE2
Middle Operand: EX
NO right operand in this case
Regards,
Abhishek.

Need some help with a remove function

Design and code a program that will maintain a list of product names. Use a String type to represent the product name and an array of strings to implement the list. Your program must implement the following methods:
Add a product to the list
Remove a product from the list
Display then entire list
Find out if a particular product is on the list.
You need to create a command command loop with a menu() function. The program must continue asking for input until the user stops.
This is the assignment and this is what I have so far. I need some help writing the remove function.
Thanks
* Title: SimpleSearchableList.java
* Description: this example will show a reasonably efficient and
* simple algorithm for rearranging the value in an array
* in ascending order.
public class SimpleSearchableList {
     private static String[] List = new String[25]; //These variables (field variables)
     private static int Size; //are common to the entire class, but unavailable
     //except to the methods of the class...
     public static void main(String[] args)
          String Cmd;
          for(;;) {
               Menu();
               System.out.print("Command: ");
               Cmd = SimpleIO.inputString();
               if(Cmd.equals("Quit"))
                    break;
               else if(Cmd.equals("Fill"))
                    FillList();
               else if(Cmd.equals("Search"))
                    SearchList();
               else if(Cmd.equals("Show"))
                    ShowList();
               else if(Cmd.equals("Remove"))
                    Remove();
     //Tells you what you can do...
     public static void Menu()
          System.out.println("Choices..................................");
          System.out.println("\tFill to Enter Product");
          System.out.println("\tShow to Show Products");
          System.out.println("\tSearch to Search for Product");
          System.out.println("\tRemove a Product");
          System.out.println("\tQuit");
          System.out.println(".........................................");
     //This method will allow the user to fill an array with values...
     public static void FillList()
          int Count;
          System.out.println("Type Stop to Stop");
          for(Count = 0 ; Count < List.length ; Count++)
               System.out.print("Enter Product: ");
               List[Count] = SimpleIO.inputString();
               if(List[Count].equals("Stop"))
                    break;
          Size = Count;
     //This method will rearrange the values in the array so that
     // go from smallest to largest (ascending) order...
     public static void SearchList()
          String KeyValue;
          boolean NotFoundFlag;
          int Z;
          System.out.println("Enter Product Names Below, Stop To Quit");
          while(true)
               System.out.print("Enter: ");
               KeyValue = SimpleIO.inputString();
               if(KeyValue.equals("Stop")) //Note the use of a method for testing
                    break; // for equality...
               NotFoundFlag = true; //We'll assume the negative
               for(Z = 0 ; Z < Size ; Z++)
                    if(List[Z].equals(KeyValue)) {
                         NotFoundFlag = false; //If we fine the name, we'll reset the flag
          System.out.println(List[Z] + " was found");
               if(NotFoundFlag)
                    System.out.println(KeyValue + " was not found");
     //This method will display the contents of the array...
     public static void ShowList()
          int Z;
          for(Z = 0 ; Z < Size ; Z++)
               System.out.println("Product " + (Z+1) + " = " + List[Z]);
     public static void Remove()
}

I need help removing a product from the arrayYes. So what's your problem?
"Doctor, I need help."
"What's wrong?"
"I need help!"
Great.
By the way, you can't remove anything from an array. You'll have to copy the remaining stuff into a new one, or maybe maintain a list of "empty" slots. Or null the slots and handle that. The first way will be the easiest though.

Need help for cenvat reversal

Hi Friends,
Need help for cenvat reversal.
Reversed MIRO by MR8M & MIGO by 102 movement but not able to post & cancel cenvat by J1IEX.
In table J_1IEXCHDR status = "P" and J1I5 does not update for document of 102 movement because reversal document of MIGO, i.e. material document with 102 movement type does not have excise tab. MBSM-Cancelled Material Documents, does not show any of the material documents.
Want to reverse the cenvat credit, please help.
--Anil Bhamere

Hi,
If I select Cancellation in MIGO then there is only Material Document option.
In MIGO Purchase Order option shows for Goods Receipt, Goods Issue and Subsequet Adj.
In this case I have been selected Goods Receipt option followed by purchase order number by which original goods receipt MIGO was created, selected 102 movement type and from line item respective MIGO document. The reversal document created successfully where as original MIGO document does not show in cancelled document list. When post option selected from J1IEX and entered vendor excise number then message appeared as No Part I exists for availing credit in excise invoice xxxxx.
If Cancel option selected from J1IEX and entered vendor excise number then message appeared as Excise invoice xxxx has already been posted for vendor xxxxx.
Please help.
Regards,
Anil Bhamere

How I can activate the tethering function on my Torc 9800

I'm tring to activate the tethering function on my torc 9800 to allow tomtom Go500 to get access to internet for traffic information. I'm not able to find a place explaing how I can set up my Torc 9800. the current version of Torc Software is 6.0 - pck 695. Thanks in advance for any help,
Orlando

Tethering, the act of allowing internet access to your PC or laptop using your phone's wireless network connection, is set up with BlackBerry Desktop Software. Plug your phone in to your PC and open BDS. Once your phone has been recognized, look at the top left for Internet Options or similar. That's where you'll find the control panel to do this.
NOTE: Tethering might not be allowed on your account. Some carriers do not allow this feature and if it can be proven that you've done it against your contract, your service could be cut off. Please make sure tethering is permitted on your account before proceeding.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Wrong buy , need a refund and reversal ...how to go about ?

There was a wrong buy , an app called mobile selling platform. For travel agents to do their flight booking thro ipad . . This happened by mistake , as normally when u download any app it would ask for the password , but some how this time it did not and the down loaded happened . I tried stopping the down load by putting off the power button , but still did not work . Hence this situation. I tried reporting a problem thro the link in the invoice , but to no success .error is reported . I need a refund and reversal . As I have of no use of the apps . I am no travel agent and tried calling the India office but was told that they had closed for the day . So then I posted this query on the communities to seek help in sorting this issue .....need help .

Go here http://www.apple.com/support/itunes/contact/
Or
http://www.apple.com/emea/support/itunes/contact.html

Need of exception handler in calling function, isn't that weird???

Hi,
I have written a function as follows
public String fetchName(String query) throws Exception
          stmt = con.createStatement();
          ResultSet rs = stmt.executeQuery(query);
          rs.next();
          return (rs.getString(1));
I've handled the for exceptions here using "throws Exception". Inspite of that when i call it from other function and in that funtion no exception need to be handled, compiler gives errror.
Following is the calling funtion
public String checksubAction(String action)
          String retValue=" ";
String query="";
          query = "select Title from dbo.Folder where Folder_Id="+folderId;
          retValue = dataBaseObj.fetchName(query);
but when i write it in try-catch block, no errror is given.
Why is it that inspite of handling exception(s) in the called function, we need to handle them in calling functions.

No you have not handled the exception. Your code say "fetchName" does NOT handle exceptions of type "Exception", the calling method should be aware of this, and handle that type of exception.
The Java Tutorial: Essential Java Classes: Handling Errors Using Exceptions
(Please when declaring a method can throw exceptions, be specific, i.e. throw SQLException in this case)

How to activate the business function HCM and HCM_LSO_CI_2

Hi!
To use the role of course administrator 1.4, we have to activate the business function HCM, Learning Solution 02 (HCM_LSO_CI_2).
On IMG, I do not see about HCM_LSO_CI_2. Could you tell me the right way to do that?
Please help.
Thanks!

Hi Linda
You should be able to active business functions through SFW5 T code or by executing the very first (top) node in SPRO.
Hope this helps
Best Regards
Reddy

Need No to activate reverse battery function.*#337...

Similar Messages

Maybe you are looking for