Need non-return blocked stock option

Hello,
Currently we move certain types of missing/damaged inventory to restricted (Blocked) stock, movements 657/658. That way it does not flow through ATP, but it is being comingled with actual restricted product from customer returns. We would like them to be completely separate stocks. We currently transfer through MIGO and we do not have QM setup.
Gary

Thanks. We have 2 scenarios:
1. For customer returns, we use 657 in order to block it so that we can look it over before returning to unrestricted.
2. Sometimes, warehouse staff comes across stock that appears to be damaged or appears logically as unrestricted, but is not where it should be. In these cases we do a 344 to blocked and then do research, then we either scrap it or return to unrestricted.
My requirement is to put scenario 2 into a separate bucket, so they are not mingled with customer returns.

Similar Messages

  • Need to post blocked stock for sales order stock

    HI Expert,
                    i have one issue pls solve it as soon as possible
    when ever i received part return from customer ( RE) ,  it automatically going to unrestricted stock , i need its going to returns stock 
    Note : this is make to order type
    urgent............ pls give solution
    thanks
    kali

    Hi ,
    Thanks for ur reply
    i changed as per your instruction but cannot.
    i need to detail explain to u
    1. My planning strategy - Make to Order
    2  whenever we receive parts from customer it will automatically the goods going to returns stock  then we create DO and move to blocked stock -
       This my requirement
    3  Simultaneously inspection also created    -
       This my requirement
    pls help
    thanks
    kali

  • RE: VELO Return blocked stock to unrestricted stock

    Dear experts.
    I have a situation where once again i would appreciate any help.
    We are doing returns in VMS for an automotive company. All my code is working and my program creates a return, return delivery, goods reciept and credit memo in vms.  My problem at this stage is when i try to move this vehicle from blocked stok to unrestricted stock (Action REUS) the Bapi returns with a message complaining about a notification class. However if i run transaction velo for the exact same vehicle and try to do action REUS the log tells me that the account requires an assignment to a CO object.  I can however not just include this in config as our FI consultant says this would influence all movements into and out of this account.  I need to code it into my program.  And pass the profit centre to the bapi.  I am using BAPI_VEHICLE_CHANGE_MULTIPLE but can not find any place to pass the profit centre.
    ANY HELP?????
    PLEASE.
    Kind Regards

    Hi Griphen
    I think that is a CO configuration problem, VMS donu2019t influence the determination profit center , ask: you are returning the vehicle at the same plant?
    Best regards
    Pablo Aguila

  • Customer returns blocked stock to unrestricted stock

    Hi,
    we have a customer returns stock in blocked status and we want to put it to unrestricted stock. how do we do that? we have 4 EA in the plant and sloc
    Thanks
    Anusha

    Hi
    For sales returns of customers which is represented by return sales order RE has schedule line category DN in that if you mention movement type as 653 in the schedule line controls fronm the SD side in VOV6 the stocks will go to unrestricted straightaway
    If this process is used there is no need to use MB1B t code at all
    Regards
    Raja

  • Project stock options: valuated and non-valuated

    Hi Experts
    In some discussions, i have been told that the 'valuated project stock' option is adaptable for customer projects where as 'non-valuated project stock' option is for cost projects. is it right?
    May explain what circumstances non-valuated project stock option is chosen?
    If we choose non-valuated project stock option, the results analysis is must, is it right?
    warm regards
    ram

    Even Customer projects may be Non-Valuated. It depends on client requirement.
    Regarding result analysis it is  not must in case of valuated. Again depends on customer requirement.  Resulst anlysis can be used for both Valuated as well as Non-valuated projects.
    Venkat

  • Adding Quality blocked stock in to warehouse stock

    Hi All
    I cannot find a way of adding Quality Restricted stock in to our warehouse in one movement.
    Normally we use MB1A mvt 222 to add returned unused stock in to the warehouse with reference to a WBS. Then we use MB1B mvt 322 or 344 to quality restrict or block the stock.
    I now have a need to return the stock in to the warehouse and quality restrict or block at the same time. I do not want to return the materials as unrestricted stock and then quality restrict/block them.
    Any help would be greatly appreciated
    Thanks in advance
    Darren

    You can achieve this with creating "scope of planning" in OM0E or special procurement keys
    [MRP multi plants|http://help.sap.com/saphelp_46c/helpdata/en/f4/7d2d4d44af11d182b40000e829fbfe/content.htm]

  • How to migrate GR block stock (103) and its PO from SAP to SAP system

    Hello All,
    We are migrating from one SAP system to another . Our approach is to only migrate open POs and upload stock with initial entry. This works for POs with 101 movement type. However POs with Goods in transit - which usuallly follow the 103-105 cycle are causing an issue.
    How would I migrate GR blocked stock i.e. if a PO has had only 103 mvt against it.
    Thanks in advance.

    Hi,
       If the invoice is not entered / paid, then the old PO should not be processed for any subsequent process and you have to do all the subsequent process based on the new PO in the new system. You may block the old PO item to avoid any mistake.
       If invoice is already entered and pending for payment, please check with your accounts department regarding the approach, since it will be critical from audit point of view. You may either cancel the invoice in the old system and create the same in the new; or continue with the payment in the old system and transfer the correct material valuation price from old system to new system and create free of cost PO for these items (only for already paid items) in the new system (since invoice is already paid).
       If you need the GR blocked stock, you have to create the transaction data!!. You may use any of the data upload tool to achieve the same!
    Regards,
    AKPT

  • Return sales stock from customer

    Dear All
    for Return goods from customer,after posting the return delivery and goods recipet (the stock is posting in to movement type 651)  and not available in the unrestricted use stock, then how to make these stock to use as unrestricted use and saleable to other customers.
    Please give the soluation for this problem, its top urgent.
    Thanks in advance.

    Hi,
    When Cuistomer Return Stocks are processed by default it goes to "Returns Blocked Stock" Not valauated for Movement type 651,
    You can trasnfer post it to Unrestrcited using Mvmt Type 453
    If you want directly into unrestrcited then use 653
    Regards

  • Transfer blocked stock between plants.

    Hi everyone !
    Pls. I need to transfer blocked stock from plant A to plant B.
    The point is stock must be blocked in plant A and then I have to transfer to plant B, but stock must always be blocked just to avoid the selling process.
    Thanks a lot for help !
    Regards.

    if you want do it with SD deliveries, then the answer is: not possible
    but pure MM movements........
    By changing the field selection for movement type 325 you can open the field 'receiving plant'. this will then allow a plant to plant movement of blocked stock. Whether you should do it or not is of course up to you.
    I doupt that it is possible to do a 2-step movement for blocked or QI stock, because the 303 post the quantity to transfer stock. And transfer stock has no sub categories like QI or blocked. It is on the same level.
    There is an OSS note 448761, it is for another transaction, but it might help you a bit to understand.
    amongst other things following is said:
    There are not two-step movement types for blocked stock since no stock in transit, quality inspection exists .
    Edited by: Jürgen L. on Jun 10, 2009 9:46 PM

  • Non Returnable gate pass

    Hi Experts,
    Is there any mtype for NRGP or we have to configure it?
    If to configure- How?
    Plz give some details for the above?
    Regards
    Pratap

    Hi,
    There is no standard transaction for this.
    You can customize a transaction for your requirement with the help of Abapers.
    In our company, we too have customized it. We have created a transaction for Out Gate Pass. In that, we have given an option of 'Returnable' & 'Non-Returnable'.
    If its Non-Returnable, the corresponding option is to be selected & then a series of releases like HOD Release, Excise Release if applicable, Security exit, etc.
    Once security exit is done, the OGP is closed & the material cannot be returned back against the same OGP document.
    If its Returnable, after security exit, another release is done by the security person to accept the material when it comes back against same OGP document & the OGP is closed after that.
    Reward if useful.

  • Return material to vendor from blocked stock

    Hi!
    I am going to use blocked stock (s) to lock low quality material.
    How could I return it to vendor. Please give me document chain .
    We use WMS and document flow must include outbound delivery.
    Andrey Garsin.

    Hi! Thank you for answer
    Please provide more detals.
    I need to manage two return scenarios:
    1. stock was loaded into SAP system from  old (non sap system). no purchase order in the system.  stock was created with mvtye p 561.   
    2. Stock was recived from vendor using PO + inbound delivery + GR (101) . Now this stock need to be returned to vendor. 
    If you have a time please give me more detailed step (document flow and key steps inside document ) for both cases or link to help. I have found only this description http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm but it is too rough.
    Andrey

  • Return item to blocked stock (Movement type 531)

    Hello. I have a question.
    In my Bill of Material, I have an item with a negative quantity; this is so when I confirm a Production Order, the component, instead of being backflushed (MvT 261), instead, it is returned to stock with Movement Type 531.
    My question is, how can I determine that this item is always returned to Blocked Stock instead of Unrestricted Use Stock?

    In my Bill of Material, I have an item with a negative quantity; this is so when I confirm a Production Order, the component, instead of being backflushed (MvT 261), instead, it is returned to stock with Movement Type 531.
    My question is, how can I determine that this item is always returned to Blocked Stock instead of Unrestricted Use Stock?
    If you maintain negative quantity in BOM, then system will post 531 movement type only when you confirm the production order.   If you want to post that stock to blocked stock always automatically it is not possible.  You can activate 04 inspection type.    Then stock will be posted to quality after Goods Receipt.   From quality you can change to blocked stock.   This is one way to shift to blocked stock.
    If you want to post 261 movement in production order while confirmation you activate back flush option in MRP-2  view of that material master.    Then while confirmation automatically 261 movement is posted by the system. 
    Regards,
    KrishnamurthyDSS

  • Return consignment stock to blocked stock

    Hi All,
         I want to be able to return consignment stock through sd (pick up)directly to blocked stock .
    Movement type 632 is now used to transfer consignment stock to own unrestricted.
    What can i do ? is it possible  to put material in block stock with movement type 632
    In MM02, I enter the material code for which I am  creating consignment pick up and selected "Quality Management" view. & assign inspection type  06- Inspection for Returns from Customer
    & marked post to insp  stock.

    Hi
    Option 1
    For your consignment pick up schedule line category F0 or F1 the standard movement type is 632
    only
    You are not adviced to tamper the standard settings
    With  632 movement type stocks will be in  own unrestricted
    You can move them to QI inspection in t code MB1B with movement type 322 which should be he correct process
    Option 2
    But if the business demands then in your schedule line category F0 or F1 change the movement type to either 
    655---goes to QI inspection straight away (you can move them back to unrestricted  t code MB1B with movement type 321)
    or
    657----blocked stocks (you can move them back to unrestricted  t code MB1B with movement type 343)
    But avoid option 2
    Regards
    Raja

  • Block stock return.

    Sir i wish to return material back to vendor from block stock .How to do this.I know that by movement type 122 we can return material back to vendore from unrestected stock.
    I am online.......

    Hi,
    1st transfer material from block stock to unrestricded Stock with 343 movment type in MB1B t.code.
    2nd steps:
    Option-1:Use 122 only if u have done GR against a PO with 101 and return the material to vendor (what ever may be the reason like quality is not good , package condition is not good etc) with respect to the same PO.If remember PO Number.
    Option-2:Use 161 if u want to return some material to vendor from ur stock (that material is there in the stock ) , You can create a PO to returns with 161 for the reason[no use of that material further] to dispose materil to vendor if u have good terms.
    Better use Option-2.
    Regards,
    Biju K

  • Blocked Stock for Returns

    Hi
    I would like to know how can make the receipt of Goods against the returns ,directly to the Blocked Stock.
    right now it is going to return stock. what are the settings required for this.
    Regards
    AK

    Hi,
    You can control this by using the proper movement type.
    Movement type is controlled through item category --> schedule line category.
    Check your settings in:
    SPRO --> SD --> Sales --> Sales Documents --> Schedule lines
    - Define Schedule Line Categories
    - Assign Schedule Line Categories
    (after that of course you have to allow the item category for the SO type, and set the proper item category for the item when creating the return sales order).
    Please read SAP online help:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63360a43a211d189410000e829fbbd/frameset.htm
    Regards,
    Csaba

Maybe you are looking for