Need notes on SLD?

Hi,
Need Step by Step for SLD.
How to configure SLD?
Wht is CIM Client?wht is the Use?
Regards
Kiran

Hi Kiran,
Please check below links
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ea90ab24235de10000000a1553f7/frameset.htm
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak
Why and what is a SLD
SQL query problem, listing all deliveries linked to an invoice
Hope this helps
Thanks
Santosh

Similar Messages

  • ** RFC to JDBC scenario - Need not source code - Correct ?

    Hi Friends,
    I am doing RFC to JDBC scenario. It is a synchronous scenario. I think it is need not required to write any code in the source code tab of  RFC. Is it correct ...? (Only Import and Export parameters are enough.)
    Kindly reply, friends.
    Kind Regards,
    Jeg P.

    Hi,
    RFC needs only configuration and we  will call remote method in R/3. Actual logic present in R/3.
    Thanks,
    RamuV

  • WBS element need not to capture specific condition type value in Po

       Hi Gurus,
    example
    we have 2 PO document types a) consignment PO b) standard PO
    if in Consignment PO condition values are
    Basi Value
    100
    Excise
    10
    E cess
    2
    CVD
    4
    Total
    116
    Total = 116 this value goes to WBS commitment line item
    a) but in consignment PO has to be value 116 , and in WBS commitment line items capture only 112 only CVD value 4 need not be capture in wbs commitment line items
    b) standard PO & wbs commitment line items need to be capture 116 only
    so please can any one give solution

    Hi,
    As I know, there is not any standard functionality for excluding commitments for certain condition type. On the other hand, you can make that line item as free issue if you dunno want to generate commitments.
    Also let other experts comment on this.
    Regards
    Shishir

  • Need notes on Business  Service Objects

    Hi Friends,
    I need notes/user guides/developer guides on Business Service Objects.
    This is urgent requirement.
    Please respond ASAP.
    Thanks in Advance
    Narendar.

    Are you sure you posted in the right forum? Which product you are referring to when you mention Business Service Objects?
    Manoj

  • Why sender agreement need not to create for IDOC

    Hi Experts,
    why sender agreement need not to create for idoc

    Please check these related discussions:
    Re: Question on sender agreement
    Re: IDOC and HTTP Adapters - sender agreement ??
    Re: ** Sender Agreement is required for RFC but not IDoc, XI, & HTTP.. Why ?
    Many threads with the same Q are answered on SDN....so if you search you can find the correct answer that you need!
    Regards,
    Abhishek.

  • Need notes on MDM and on material master data

    HI Gurus
    Can some one help me In understnding MDM tool and if can provide notes and second need notes on material master data
    thanks everybody

    Hi,
    Please refer below links for the MDM and material master. Thanking you.
    http://wiki.sdn.sap.com/wiki/display/SAPMDM/SAPNetWeaverMDM+Tools
    http://www.sap-img.com/materials/classification-view-of-material-master.htm
    http://www.magnatraining.com/how-to-create-material-master-in-sap-mm/

  • Real Smack In Face (iDrones NEED NOT APPLY)

    Having been an Apple purchaser and stockholder since 1992, this is the first time I must say that I'm questioning my emotional attachment to this company. This emotional aspect has made me overlook the issues of their computers, monitors, keyboards from the Mac Classic II to the PowerPC 7100/80 to Color Stylewriter Pro's to iMacs to at one point operating a "microsoft-free" office.
    Never once did I feel ripped off, until now.
    This entire purchase and all the headaches that accompanied it (losing my corporate discount with AT&T for this phone) to now finding out that less than 2 months after purchase Apple says to the their loyal purchasing base, sorry, but the phone is really worth $200 less, is absolutely unreal.
    Apple owners overpay for everything, computers, monitors, etc. and not Apple smacks us in the face.
    While I will be going the same route, contacting AMEX to counteract this, I will never look at Apple the same way.
    iDrones, need not apply, this is an absolute legitimate gripe and stop acting like you work for their PR dept. Oh wait maybe you do.
    And, for those of you using iToner, DO NOT UPGRADE TO Quicktime 7.4.

    I am the same way, I have been a mac user for 21 years and literally have spent close to $750,000 with them buying equipment for myself and my businesses. Even before this iPhone fiasco I was feeling like the current lineup of Macs just arn't worth what the once were. Any user can go out and build a machine which will keep pace with the Mac Pro for about the cost of the iMac and with a little effort you don't have to give up the OS X experience either....
    http://www.s155158671.websitehome.co.uk/hackintoshpage4a.html
    Apple took a big gamble stepping into the Intel hardware market, it is up to the users to decide if the premium for Apple hardware is worth it anymore...

  • Dimension Current Flag and Last Update date not updated - SLD issue!

    Hi.
    ODI is running pretty well now. I have created several interfaces from flats, multi database tables, but still have to test the services and cdc, etc... later I will do this.
    I am having a small issue here when dealing with Slowly Changing Dimensions. I am trying to populate a product dimension. I use a Load KM and the SLD KM. Then I update a product row in the source, and I wish to make sure that type-II runs OK for major and minor changes after running the interface.
    Well minor changes run ok, deletes don't run at all, and update for major changes should generate another surrogate key and turn the old record "current flag" to zero and "close"/update the last update date as well!!!
    What am I missing here? Is this related to the KM restrictions?
    "Restrictions:
    - Make sure to map ALL target table columns flagged as: "Surrogate Key", "Natural Key", "Current Record Flag", "Start Timestamp" and "End Timestamp". Notice that mappings set for the "Current Record Flag", "Start Timestamp" and "End Timestamp" columns are not used."
    Do I need to implement somehow that behaviour or use another KM?
    Another question regarding data warehousing: Well usually in a bespoke DW we can have N sources, N staging areas, and several data marts. Using ODI, for instance what are the best practises to create or simulate this behaviour??
    I know that using a Knowledge Module I can load/extract (to temp tables in the source work schema), then integrate in the target schema.. using the same schema to temp staging tables or another schema.... what is the best aproach?
    Any dw people wants to share some experiences here?
    Thank you all.
    Best regards,
    Alvaro
    Message was edited by:
    Alvaro Silva

    Thanks Cezar :)
    Well Updates work if I unckeck 262!!! :) But deletes are not setting the CURR to zero!!!
    PS: um abraço para ti também .... o mundo é pequeno! :) será que podes adicionar-me no messenger para alguma troca de experiências? [email protected]
    Alvaro
    Message was edited by:
    Guest

  • System Copy XI 3.0 - do I need a new SLD?

    I am planning to refresh my Sandpit XI system from my Development environment on XI 3.0, WAS 6.40, NW04.  I have the system copy guide version 1.1 which states that I need to migrate to a new SLD.  At present, I have one SLD for my Sandpit / Dev /QA environments and a second for Prd.
    The documentation explicitly states that I have to migrate to a new SLD, but I don't really want to have to maintain another one.  Has anyone experience of this?  And do I really need to create a new SLD for this.?
    Thanks in advance.
    Graham

    Graham,
          If your present Sandpit and Dev SLD's are same and you are trying to refresh sandpit with Dev, in this case it is not required to create new SLD.
    Regards,
    Ranjeeth.

  • I just got a used ipad version 6.1.3.  I have an ipod classic version 1.1.2PC and I have a laptop with windows 7 and use internet explorer.   somehow i have icloud on my ipad but no app for it. I cannot explain what I need --not enuf text--2 b continued

    I have never used this--on my ipad it says I have an account with icloud and that I can syn all my devices but there is no app for icloud on my ipad.
    I have never used my ipod myself--that is to put material on it.  A friend did it and I registered with Apple and I did have itunes and a list of my stuff on my old pc but it is gone.  I tried to get itunes on the pc I have--no sucess--5 + attempts yesterday.  Today I tried to link my ipod to icloud.  In the "settings" heading I do not have a "software" choice.  I do not know what to do.  Can someone help me.  I am not very pc literate--so you might get frustrated.  Thank You

    Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
    Anything else I could try, or am I doomed!
    All of your help is much appreciated, thanks

  • Report Needed, not sure if possible

    I need a report that shows what patch was applied to what machine.
    I would have thought this would be a standard report, but I can not find it pre-built or find anyway to create it myself. If anyone has any suggestions on how ot do this, I would appreciate it.
    Thanks,
    Dan

    danh2010,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Adapter Framework can not access SLD

    Hi,
    That's what I get from JPR adapter:
    "SLD host:port = sap2:50100
    Error getting JPR configuration from SLD. Exception: User credentials are invalid or user is denied access
    No access to get JPR configuration"
    And in the trace file I'm getting :
    "User J2EE_GUEST, IP address
    Error processing an HTTP request. Http error [401] will be returned. The error is [Access Denied.No details available]."
    CCMS service in Componenets Monitoring for Adapter Engine is shown as grey.
    Do I miss something here?
    Sincerely,
    Evgeny.

    It seems like CPACache tries to get the configuration with J2EE_GUEST authorhizations.
    Here is the log:
    CPA Cache not updated with directory data, due to: Couldn't open Directory URL (http://sap2:50100/dir/hmi_cache_refresh_service/ext?method=CacheRefresh&mode=F&consumer=af.x01.sap2), due to: HTTP 401: Unauthorized
    User J2EE_GUEST, IP address
    Error processing an HTTP request. Http error [401] will be returned. The error is [Access Denied.No details available].
    Confirmation handling failed, due to: Couldn't send confirmation, due to: Couldn't access Confirmation URL, due to: HTTP 401: Unauthorized
    Any idea where do I miss configuration step?
    Thanks.

  • B2B scenario with IDocs, sender system not in SLD

    Hello all
    When sending a purchase order IDoc (ORDERS05) out of SAP ECC 6.0 I get the following error in SM58:
    No service for system SAPPEE, client 200 in Integr ation Directory
    Message no. SR053
    Until now I did not register the SAP ECC 6.0 system in the SLD. Is this absolutely mandatory?
    The RFC-Destinations work like a charm, the user (type C) and authorizations (for now SAP_ALL) should be ok (same settings in XI and SAP ECC system).
    In the integration directory I defined a partner "IDOC_SENDER" with the following identifiers:
    Agency = http://sap.com/xi/XI
    Scheme = XIParty
    Name = IDOC_SENDER
    Agency = PEE_200 (SID with client from customers system)
    Scheme = ALE#LI#LF
    Name = 0000601140 (this is the vendor id from customers point of view)
    Agency = AEE_200 (SID with client from vendors system)
    Scheme = ALE#KU
    Name = 0000001011 (this is the customer id from vendors point of view)
    Within this partner "IDOC_SENDER" I defined a business service "Order" and assigned ORDERS.ORDERS05 as allowed outbound-interfaces.
    Within this business service "Order" I defined a sender communication channel "Order_send_IDOC" with adapter type IDoc.
    Based on this I created a receiver determination, interface determination, etc.
    I also configured things in IDX1, IDX2. The metadata (structure info of idoc type ORDERS05) was successfully loaded.
    Did I miss something? What to do to eliminate this error:
    No service for system SAPPEE, client 200 in Integr ation Directory
    Message no. SR053
    Any help would be greatly appreciated!
    Thanks in advance
    Renaud

    I think there are some mis-configurations:
    defined a business service "Order" and assigned ORDERS.ORDERS05 as allowed outbound-interfaces.
    You do not define a business service when IDOC/ RFC/ PROXY is sender/ receiver
    It should be Business System and it has to be defined in SLD and then imported in ID. (search on SDN for How to create Business System )
    defined a sender communication channel "Order_send_IDOC" with adapter type IDoc.
    You do not create Sender channel when IDOC/ PROXY is sender.
    I would suggest that you follow steps mentioned in this wiki: http://wiki.sdn.sap.com/wiki/display/XI/SAPR3%28Idocs%29ToXI--Steps+Summarized
    Regards,
    Abhishek.

  • RWB not in SLD

    Hi guys,
    I am facing the following problem in a new PI 7.01 installation (be careful the PI version is 7.01 not 7.1).
    According to the Readiness Check guide everything seems to be working fine, but the RWB is not registered itself in the SLD, under technical systems of type Exchange Infrastructure.
    Also, I cannot see the RWB under "Tools" section in the RWB monitor page itself.
    Apart from that, the RWB works fine, the Caches are ok, everything green.
    Also in the Adapter Monitoring section I can only see the JPR adapter, and no other adapters.
    Your responses will be rewarded.
    Thank you.

    Hi,
    I have the 7.1 version, but this might help too.  Check Adapter Engine missing in SLD and RWB and note 720717.
    Thanks,
    Rick

  • Delivery quantity need not be exceed, After creating STO-PO in TCODE  VL02N

    Hello Gurus,,
    Greetings!!!!
    Tcode- VL02N...
    While we do PGI / SAVE after the changing the delivery quantity in Tab "Picking", it need to be checked that delivery quantity not be exceed then quantity entered while STO PO has been created for that particular PO.
    Means, in transaction VL02n  when we changes the Delivery quantity of tab "Picking" it should be equal or less then PO quantity,...
    When user put more picking quantity then it shows error that "it has been exceed" and it is working properly as well......
    But Problem I do have that user increase the Delivery quantity and put the picking quantity in terms of it so system is accepting this things..... but the Stock transport Order (STO) of that particular Purchase Order quantity is same as when created....
    And the requirement is that it is not increased then STO PO quantity.....
    So please please help to find out this solution whether this is solved using  BAdI or USER_EXIT....or any other solution please gurus ....I am facing this problem since long but can not find the solution ....I dont have that much experince in SAP-ABAP

    Hi,
    See Note 415716 - User exits in delivery processing. I think that USEREXIT_READ_DOCUMENT can work for your requirement. The question is fix a good filter to avoid problems in performance. For instance:
    CHECK ylikp-lfart = 'NL'.
    CHECK  t180-trtyp = 'V' .   "ONLY CHANGE
    and so on.
    Set the check:
    IF xlips-lfimg > ylips-lfimg.
      MESSAGE e(xxx)yy with....
    ENDIF.
    Remember check the UoM. If you don't have experience with ABAP, look for an ABAPer.
    If you don't have experience with userexits, please read carefully notes 381348 Using user exit, customer exit, VOFM in SD and 178328 Problems due to incorrect user exits in SD.
    I hope this helps you
    Regards
    Eduardo

Maybe you are looking for