Need Old Version of Firmware - Suspected Errors with 1.11

Zen V Plus reporting "Audio format is not supported" after upgrade to firmware ..0. I am interested in reverting to .0.xx to see if problem is resolved, but I cannot find it anywhere. Regards,?John

Problem solved for me. Found .0.03 firmware available from link at nomadness.net (http://www.nomadness.net/modules.php...rticle&sid=980). No longer experiencing errors with audio format not supported.

Similar Messages

Need help with installing old version of firmware

I would like to revert to an old version of firmware for my Airport Extreme base station. I have read in a number of postings that this would possibly help with the problem of my Canon Pixma ip3000 not working after the firmware was usdated. When I tried to install the old firmware, the Installer would not allow it, there was just a message that the software was up to date. Could anyone please give a step by step description of how this can be done? Is there a way around the Installer? Thanks.

The firmware supplied with the base station was 4.1. After installing it, everything worked just fine, including wireless printing to a Canon Pixma ip3000. At one point, after being prompted by a message onscreen to upgrade to 4.2, I did the download and installation, and that is when all the problems started. No wireless printing, and I can't seem to use the Airport Admin or Assistant (not responding). Since then I have also upgraded the OS to 10.4.5.
I am trying to downgrade to 4.1 since that is what worked initially and what was suggested in another posting I read.
I did look at the information for the various parts of Airport and noticed that the Setup Asistant is 4.2, the Admin Utility is 4.2 and the base station is 5.5.1. Could this be affecting the problem as well?
I will try downgrading using the link you provided. Thanks very much.

How to upgrade old version of MacPro 1.1 with Lion 10.7.5 to Mountain Lion? There is some way by inserting 64 bit instead od 32bits. Reply to Stefan Erix

How to upgrade old version of MacPro 1.1 with Lion 10.7.5 to Mountain Lion? There is some way by inserting 64 bit instead od 32bits. Reply how to do it to Stefan Erix, Uppsala, Sweden
<Email Edited by Host>

If you are a developer, or have a similar personality, there is an aftermarket EFI-64 "work-alike" program you can load into memory instead of 64-bit firmware. It is too complicated for regular folks.
You must already have upgraded your Memory and your graphics card to use this solution, and your Mac will not operate quite normally. Any problems with it are unsupported.

TS3074 Hello anyone with Windows 7, not sure why having followed instructions above, install of latest version of itunes won't work and can no longer open old version either. anyone help with this?

Hello anyone with Windows 7, not sure why having followed instructions above, install of latest version of itunes won't work and can no longer open old version either. anyone help with this?

Hi,
thanks for your reply.
Yes, except n°1 - empty Temp directory, I had tried/checked all of those.
I emptied the local temp folder tonight, but it still won't work.
Please note: the installation doesn't give me any problem. The program was working fine, until at one point *plouf* it stopped working. I can re-install it without any problem, it just crashes when opening.
\\edit\\ I seem to have located the problem, it's in the library files. If I re-install iTunes without my library, it works fine (though there is no music in it, yet). As soon as I import my library, or replace the My Music\iTunes folder with the old one, it stops working.

How to fix the Log4j error due to old version of log4j jar bundled with jre

Hi,
We have a webstart application which budles the latest log4j.jar (ver 15), but for some users at startup after the app is downloaded the newer version of the log4j jar is not loaded - We get a NoSuchMethodError when we try to use the trace() method of log4j. Question is how do we ensure that our app always picks up the newer version of log4j jar bundled with the app and not the one in the lib/ext folder of the jre,
thanks

I think we both have similar issue Thread
Do anyone knows why this is happening?

Old version of itunes to help with burning issue.

I first downloaded itunes about a year and a half ago(Feb of 2005). I cannot remember what version it was. Everything worked fine and burning music cds was a piece of cake. About 6 months later I downloaded a later version of itunes and my problem with being unable to burn cds began (error 2123). I have tried about everything I can think of to fix it. I have posted on this forum before. There have been some people on it that have tried to help but nothing seems to work. I've tried contacting Apple but that's been a deadend street(if anyone knows how to get a real person on the phone at Apple please let me know). I've contacted the drive's manufacturer and they have tried to be helpful but they, as I, believe it's an issue with the itunes software. I think the only way I'm going to get this problem fixed is one of three things. First, try to find a new drive that's compatable. Secondly, find a way to install an old version of itunes without losing everything on my machine and my ipod. Thirdly, stop using itunes altogether. Has anyone run into this problem and found a solution? Any help would be greatly appreciated.
TJ

Hey, I had the exact same problem. Is your drive an AOpen drive? If so, I read somewhere that their site admits that two of their DVD Rewriter drives do not work with ITunes 6.
You can install old ITunes versions at oldapps.com. However, I installed version 5 and it's now saying I need an upgraded version to play or burn these songs. Let me know if you figure anything out.

I just downloaded Maverick on my Macbook Pro from 2011. When I try to open iPhoto, it says that I have an old version that doesn't work with Maverick. None of the solutions stated on this forum work for me, because there are no options displayed.

After downloading Maverick on the MacBook Pro that I bought in 2011, I am unable to open iPhoto. The message says "You can't use this version of the application "iPhoto" with this version of OS X. You have "iPhoto" 9.2.3" What??? That is ridiculous. Why doesn't Maverick download everything? I've tried the "fixes" I found on this forum, but none of them work for me, because there is no workaround via the library. I can't access the library.

I have an old iPhoto version and it still works with Mavericks, the version before yours, that is puzzling.

My Mac version 10.4 isn't compatible so I deleted Firefox entirely. How do I get the old version (the one that works with my system) back?

I have a Mac OSX 10.4.11. I installed the new Firefox update and when I tried to open it, it said it wasn't compatible with my compatible with my computer. I deleted it and now I would like to know how to install the old version of Firefox --or any version that works with my system. Thank you!

Last version for 10.4.11. <br />
http://www.mozilla.com/en-US/firefox/all-older.html

Need old version iPod software 2.1

Hi
i got a 20gb 3rd gen ipod, it was working perfectly, yesterday, i needed to restore it to make new playlists i tried to restore it witht he lastest version of iPod updater but it still showing me the Folder with the exclamation point. I tried all the reset tricks and disk mode but the Exlamation folder still showing. The last time my ipod broken like this, i fixed it by restoring with the first iPod software for the 3rd gen ipPod ( iPod software 2.1 ) then updating with the lastest ipod pdater.
SO PLLZZZ if somebody got a working link to download it, plz tell it to me u ll save my iPod
PS: the apple link is not working anymore: http://docs.info.apple.com/article.html?artnum=120229
Thanks
P-4 Windows XP Pro

Also, if you want to do an 'Update' with your old firmware (versus a restore which wipes all your data), you simply go into your iPod_Control folder on your iPod (which is set to hidden on default), go into Device folder under that and open the SysInfo file with notepad.
Alter the BuildID and VisibleBuildID to a number lower than the firmware updater you're going to use.
example: This is the SysInfo file. The numbers bolded, italicized and underlined is what you want to change:
BoardHwName: iPod Q21
pszSerialNumber: JQ5122G6PS9
ModelNumStr: M9282
FirewireGuid: 0x000A2700024E5DDF
HddFirmwareRev: JD100B
RegionCode: LL(0x0001)
PolicyFlags: 0x00000000
buildID: 0x03108000 (3.1)
visibleBuildID: 0x03108000 (3.1)
boardHwRev: 0x00000000 (0.0 0)
boardHwSwInterfaceRev: 0x00050014 (0.0.5 20)
bootLoaderImageRev: 0x00000000 (0.0 0)
diskModeImageRev: 0x00000000 (0.0 0)
diagImageRev: 0x00000000 (0.0 0)
osImageRev: 0x00000000 (0.0 0)
iPodFamily: 0x00000004
updaterFamily: 0x0000000A
Don't touch anything else. You want to use version 2.1, so you'd change 3108 to 2008. Simple.
This will give you the option to 'update' the firmware, so you don't lose all your songs. Don't know if this would help in your situation, but it might.
Sony VAIO Laptop Windows XP
Sony VAIO Laptop Windows XP
Sony VAIO Laptop Windows XP

Not allowed to run old version, can't download new, with MacOS 10.3

I have a Powerbook running Mac OS 10.3.9. When I start Digital Editions it tells me that there is a new version and that I must upgrade or quit. However, the new version (1.5) requires Mac OS 10.4 - and I cannot download it even if I wanted. In effect, I can no longer run Digital Editions on my computer. To put it kindly: That is somewhat irritating.
Of course, it works if I shut down internet access, but that's quite awkward.
How do I continue running Digital Editions?
/Jacob

Thank you for checking this out!
Well, the reason for not upgrading to 10.4 is simple. It costs money that I don't have to spend.
10.3.9 runs great, and every other piece of software I have allow me to run the versions I have installed. They also run great. Only Digital Editions suddenly refuses to run, for no apparently good reason.
I use Digital Editions to read (time limited) ebooks I borrow at the library. I have not been able to read these with Acrobat Reader.
On a more angry note: I think software that on purpose renders itself useless is very near a kick in the face on the user.
Why can't users have the OPTION to upgrade, like with any other civilized software? Especially when it is obvious that the new version is incompatible with the machine's operating system.
Best regards,
/Jacob

Need old version of Safari--Where can I find it?

I downloaded the new safari 3 today not realizing that my computer could not run it. I did not see the 10.4 requirement. I run 10.3.9. It allowed me to install the program but when I click on the icon nothing happens. Obviously it overwrote the previous Safari.
I have tried to download 1.3.1 update and it will not work "You cannot install this software on this volume. THis system cannot use this software."
I tried 2.0.1 but it requires 10.4.2
Do I have to uninstall the new safari 3 somehow first? If so how would I do that? Then where do I find a version that I can run? I had no problems before.
Thank you.

You're Again Welcome L Ryan!
Navigate to HD > Applications: Move Safari to the Trash.
Navigate to HD > Users > Your Account > Library > Preferences: here, locate and move to the Trash this file com.apple.Safari.plist.
Navigate to HD > Library > Receipts: Move to the Trash Safari.pkg & Safari31UpdUniv.pkg.
You're Safari Bookmarks are stored in three locations.
HD > Users > Your Account > Library > Cache > Metadata > Safari: HERE Bookmarks folder.
HD > Users > Your Account > Safari: HERE Bookmarks.plist file.
I found another one!
HD > Users > Your Account > Library > Safari: Bookmarks.plist file.
If you delete Safari from the Applications folder, those items should not be affected, but to safe, before deleting Safari, make copies and put them on the Desktop.
Be sure to note the original location of each item, in case you need to put them back.
Once you have reinstalled Safari, restart and then run Repair Permissions.
Download and install the 10.3.9 Combo Update.
Restart.
Run Repair Permissions.
Run Software Update and install any additional Safari updates.
Restart.
Run Repair Permissions
Check to see if Safari is functional, and if your Bookmarks are there.
I'm not sure how upgrading Safari affects Mail, as I don't use Apple Mail, but for now, just make copies of all your Mail folders, and place them in a folder on the Desktop.
Again noting the original locations.
Maybe correcting Safari, will also repair Mail.
Don't know yet.
I have to be away for a bit, but if you can wait a while, I'll be back to post more extensive info about the Mail folders.
And Thank You, for extending the courtesy, of awarding in  Discussions, as this is not a requirement, nor mandatory, but is much appreciated!
ali b

Old version Iphone 32 GB. with IQS 6 doesnot work with itunes

Itunes placed new IQS 6 in my old Iphone32 GB ( 3eyrs old,) and Itunes not recognice,my Phone in last procedure with start with Itunes..

Update iTunes on your computer.

Need old version and does HiQ run in Classic mode on Mac OS

I'm hoping an NI rep responds to this: I'm a licensed user of HiQ 2.2 for Mac. I switched to Mac OS X, did not reinstall HiQ, and no longer have my original floppies. Is there any way I can get a replacement? Also, can anyone tell me if HiQ will run in Mac OS X's Classic mode?

Thank you, Chris. I just wanted to confirm. It's a shame that NI dropped HiQ. I'm having a heck of a time doing the simplest things with Mathematica ---steep learning curve--- and it can't do some of the things that HiQ could!

Is it possible to bypass "Old Version of Java Requested" error message?

At my organization, we have a number of applications which request an older version of Java, but work just fine in the latest version of Java 7. This prompt coming up confuses our users, and I'd like to disable it administratively. Is this possible?

Did you try the Undo button at the top of the document? If you tried that and had no success, I'm afraid that the sheet is gone. There is no trash can from which you can remove files on the iPad.

TS3212 can't download new iTunes version; old version blocks it; error message "network resource is unavailable" iTunes.msi

Can't download latest iTune version on my PC with Vista 64bit. Old version blocks it. Error message: "......network resource that is unavailable" references "iTunes.msi" How do I remove old version?

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Need Old Version of Firmware - Suspected Errors with 1.11

Similar Messages

Maybe you are looking for