Need Open Source Sip client(user agent)

Hi,
Can any one tell me where to find and open sourse sip client which has the facility to call PC to PC ,PC along with IM(messanging).
I have tried the SIP-Communicator that is not good.
If You have the code please forword me or let me know .
My mail id is [email protected]
pramod.

hello,
for the last 4 weeks I struggling to know how to make my mjUA working for voice communication. Thanks God, I found your message that sent last year.
Now I use a free VoIP registrar server (just like free world dialup), but my mjUA can't make any call through that server although my mjUA can register to that server successfully.
my question is:
- is mjUA can be run using free registrar server? or I must use the MJSIP server?
- for the audio tools, I use the JMF (not RAT) without any change on mjUA. Is that right choice?
- can you send me the really working configuration file (such as a.cfg on config folder)?
I'm so desperate because this UA's is the key for my final project. And I hope you can help me.
Best regards,
paulus ivan

Similar Messages

Open source SFTP Client

Hi,
I�m looking for an open source SFTP Client.
I�ve downloaded commons-net-ftp-2.0.0.jar from http://people.apache.org/~rwinston/commons-net-2.0/.
It is very useful and has support for FTP and FTPS protocols but I need to have support for SFTP protocol too.
So any update in this regard is highly helpful to me and the same is highly appreciated.
I�m looking NOT for any graphical or command line,�kind of implementation.
I�m expecting a jar like commons-net-ftp-2.0.0.jar which I can as use as part of (server side) java applications.

corlettk wrote:
georgemc wrote:
And your Java question is?Relax, Thunderbird is written (predominantly) in Java.What? No! It isn't! Why do you think so?
Thunderbird is based on XULRunner, which is a lot of C++. And Thunderbird itself is a mix of C++, JavaScript and XUL.

Open source Email client

Hi friends,
I want open source Email client project.As of now I am using SourceForge/columba Email client project which is having so many bugs.So i need better solutions.
Thanks &Regards,
Vaideesh4u

corlettk wrote:
georgemc wrote:
And your Java question is?Relax, Thunderbird is written (predominantly) in Java.What? No! It isn't! Why do you think so?
Thunderbird is based on XULRunner, which is a lot of C++. And Thunderbird itself is a mix of C++, JavaScript and XUL.

Skype to release an Open Source linux client

Apparently, Skype will be releasing an open source linux client.
http://share.skype.com/sites/linux/2009 … ource.html

wonder wrote:http://bbs.archlinux.org/viewtopic.php?id=83856
Yup.

I Need Information about Open Source Java Client/Server Instant Messaging

I need your valuable help and collaboration with the following issue:
I need to know where can find a robust Open Source Java Instant Messaging Client/Server Application.
I thank in advance for their valuable time. And for the attention and the collaboration lent to me.

I was going to mention that right off, but since the OP is clearly unaware of the search engines on the Web, I thought I'd give him a hand. Jabber works pretty good - I tried it a while back and some of the clients were ... quirky.

Mobile RD Clients - User-Agent string

Anyone happen to know what, if any, user-agent string the RD client for Android (and\or IOS) is using when connecting via an RD Gateway?
The Windows RD client uses "MS-RDGateway/1.0" but it appears that the Android client (at least) does not, and I can't for the life of me get a packet capture to decrypt the traffic.
Thanks

Got this one sorted - looks like internal RemoteAppAndDesktop connections connect via 3389 through the RDGateway.
Here's what I ended up with: http://blogs.serioustek.net/post/2014/10/04/load-balancing-remote-desktop-gateway-with-citrix-netscaler-part-2.aspx

Need open source tool

i want to add a private key into a certificate file
what open source tool i can use ?

you are right but i did the other way around.
I have a keystore.
I extracted certificate and the private key out of that keystore (by keytool and a custom java program)
Now, i would like to share this certificate and private key to a client (for the time being its the browser) so that the browser and the server are mutually authenticated in 2 way SSL.
so, if i can make a certificate + private key file ...then i could use Browser's Import tab and will pick up the file and then i'll call a secured Web Service from the browser.

Need open source for SUN's JIT...

Hi,
From where we can download the open source for SUNWJIT? Is it not available as part of Standard CDC Personal Profile package download from SUN website? Is it bundled or combined with other packages? I am unable to search in Sun website itself about JIT. Can somebody help me in this regard please?
Thanks,
-Suresh

http://java.sun.com/j2se/1.5.0/docs/api/java/net/ServerSocket.html
http://java.sun.com/j2se/1.5.0/docs/api/java/net/Socket.html

Can I connect open source evolution mail client to an OCS Mail Server?

Hi.
I'm trying to configure an evolution mail client to connect to OCS Mail Server. The idea would be to evaluate this solution over costly MS Outlook. I'm aware that Oracle provides a connector for outlook client and that this facility might offer certain functionality not available with other mail clients. So far, i can connect, send and receive mails. However i can't access the distribution list in Oracle Mail Server, or put in other words, i can't access the OID. Evolution offers the option to connect to an ldap server, but i've not been able to connect. The guys as Metalink tell me that if this client can connect to an ldap server one could accessed the distribution list in OID.
So :
- Has anyone out there tried to connect this mail client or any other open source mail client to OCS Mail Server?.
- Can evolution client really connect to an ldap server? one like OID?.
Thanks in advance ...!

Hello Luis!
I have in the past used different mail clients to connect to the OCS. So as a fact as long as they speak POP3 or IMAP you should be capable of reading your mails.
However I did not try to use the distribution lists.
What exactly is not working with the connection to the OID (LDAP) from the Evolution client?
Did you try to set the logging in the OID to a higher value? This helped me lots of times when dealing with OID problems.
cu
Andreas

VoIP SIP Client

Now I know I'm not the only one seeking the ability to write a snazzy little Flash Application for SIP access. I am, however, the only one willing to start a neat little open source project to help, people like me, use SIP to its full potential.
So here it goes, I'd like (and hope) to write a SIP client for two projects. The first is a for-profit endeavor for the company I work for, and the second is a not-really-for-profit webservice I own that would have its customers benefit from on-site VoIP call. Since they both require the same thing, I'm willing to open it up as an open source project to allow it to continue growing.
The idea is this:
A list of contacts (unassociated with the SIP client) have phone numbers or VoIP extensions. Click on the call button will activate a snippet of javascript that will communicate with the Flash SIP Client, sending instructions to dial. On the bottom of the screen the flash client will begin dialing, or ask for permission access cam and mic then dial. The sip client must also be able to receive inbound calls being projected to it from my VoIP server. Do all the things needed for a SIP client to do, such as hold, conference, mute, answer, and hangup calls.
So I'm thinking the Flash Client will be a thin, virtually no interface, that will communicate with the onboard javascript. This thin-layer of flash would be invisible, to everyone except a developer maybe looking at trace information. Javascript would instruct the flash client to connect to SIP, establish calls, hangup, etc. Flash would also send instructions from the VoIP server to javascript such as incoming calls, text, sign off, messages... etc.
So what I'm asking you as the community here at adobe for is somehelp. I've been Googling and found not to much helpful in this area.
I know flash can communicate to javascript. I know Javascript can communicate to flash (Yahoo does it for their IM client). I know Flash can communicate with VoIP servers via sip. What I don't know is where to start writing this client. I herd that AIR has an API for such things, that maybe even flash has a SIP/VoIP API, where is it? If I have all this information I'll start a nice open source project on sourceforge, github, or something like that where I hope to get input and offer the very thing I'm looking for to people all over the net. Expand VoIP capabilities so we can truly see inexpensive solutions popping up over the net. With the advent of VoIP integrated telephony should not be an expensive effort.
P.S. - Nothing says that when you sign in that the Flash API and Javascript components don't communicate with each other through another window to keep the SIP client connected. Also nothing says that when the main windows closed it doesn't disconnect the sip client and the user goes on his/her merry way... This IS possible, I just need to put the larger peices together.
Let me know!

I am definitively interested. Will you contact me at radoslav <At> everestkc.net.
What about this: http://flashphoner.com/
Is this totaly open source or you need to pay to be able to check out the code?
Rad

Vmobile SIP Client

I use an Asterisk open-source SIP server in my home office as mu business telephone system. Works great. I downloaded the Vmobile SIP client for my 9930 Bold so I could use it as an extension of the Asterisk. Two issues: I get a DNS error when attempting to log in to my home wifi network even though the domain name is recognized by other apps. When I tried to switch to the 3G cellular network, I am prompted for an "APN name, APN username and APN password". I cannot find this info anywhere.
I did try to get to the blackberry.vmobile.eu webpage, but it appears to be down tonight.
Anyone have any suggestions>

sorry just a question then maybe a worthwhile reply.
where the heck do you get this "vmobile" client from??

Softphone open source

Hi, Is there any j2me open source SIP VoIP client ?
I tried to find some mobile open source sip voip client but only got someone developed in Linux or Windows CE platform.
Thank you for your attention!

Hi, Is there any j2me open source SIP VoIP client ?
I tried to find some mobile open source sip voip client but only got someone developed in Linux or Windows CE platform.
Thank you for your attention!

Forms 6i, open default mail client and add attachment to message

Hi,
I would like to use some functionality in my forms application. I want call some action, that opens default mail client in windows platform and add some attachment to message. I want to do this for my reports. I am exporting reports to PDF files. I am using oracle forms / reports 6.0.8.12.1 version. And I cant use build-in PDF export functionality, because exported PDF files are in old PDF version and I have problem with Czech charakters. So I am using my own virtual PDF printer for printing reports. A now I would like to send report as mail attachment. I know that there is this functionality in report preview. When I click button with letter image (showed on screenshot at http://img20.imagevenue.com/img.php?image=00067_screen_122_899lo.JPG) the default mail client is opened in this is created new messages with report (eps) in attachment.
That is what i need. Only open default mail client and add own attachment to message.
I found only one solution for Outlook, but I need open default mail client (for example Mozilla Thunderbird etc.)
Can You help me? Or send some solution how it is solved in report previewer?
Thank you.

Hi,
metalink Note 47498.1 "Programmatically Sending a Fax/Email via Microsoft Exchange" may be a good documentation for you. Have a look in there.
regards,
Heike

X11 and open source ATI drivers

Hi. Well I have a little(big) broblem. I have ATI Radeon x1600 video card, and I need open source video drivers (not fglrx). I installed it by the article at archlinux wiki:
Open Source ATI Drivers
The open source drivers will work to some degree on Radeon chipsets up to the Radeon X850. Radeons up to the 9200 series are fully featured, stable, with full 2D and 3D acceleration. Radeons from 9500 to X850 have full 2D acceleration, the y provide 3D acceleration as well but it doesn't support all the features that the proprietary drivers do. A full list of supported chipsets can be found here.
[edit]
Installation and Configuration
The package is xf86-video-ati. Note: if you have previously installed the proprietary driver make sure to remove fglrx, fglrx-beyond, and fglrx-utils.
pacman -S xf86-video-ati libgl-dri
Edit your xorg.conf, and add or make sure you have the following in their given sections. For
Section "Module"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "Device"
Identifier "name" # your alias
Driver "radeon"
Option "XAANoOffscreenPixmaps" "true" #needed for aiglx
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
When using this driver, make sure you do not have fglrx-utils installed but use libgl-dri instead. Otherwise you'll have the wrong libGL.so which will cause direct rendering not to work.
So I did all this crap and i get, when i tryed to start X:
(EE) Failed to load module "glx" (module does not exist, 0)
(EE) Failed to load module "radeon" (module does not exist, 0)
My xorg.conf:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "drm"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" ""
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
Driver "radeon"
Option "XAANoOffscreenPixmaps" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Any help? =/

I may be wrong, but I dont think the open source drivers support the X1xxx series cards.
If I am wrong, then make doubly sure you actually did install xf86-video-ati and libgl-dri. Then, maybe try starting from a fresh Xorg.conf by running this as root in the console (without X started):
cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bak
X -configure
mv xorg.conf.new /etc/X11/xorg.conf
And see if that works, if it does, slowly build on top of it, until you have your desired result

User Agent (DC 5.3, Agent 2.2)

Having problems with the user agent/AD integration. I have installed the user agent on a Windows 2008 box, it seems to be communicating with the DC servers fine. When going from the agent to the DC is where it seems the problem is. I added the IP on the DC, added the DC on the agent...get nothing. I can telnet to port 3306 on the DC from the user agent machine fine and get the Got packets out of order message like is said in the troubleshooting guide.
Any suggestions? I turned on debugging and logging on the agent and there are no errors listed and it says start DC chk, end DC chk...

Hi ,
Not sure if this helps but there is a known bug with v2.2.18 of the UA software which doesn't populate events unless the Date format is set to US Locale on the Domain Controller. I've seen it where events aren't logged at all, or events are generated but only on the first 12 days of the month (I assume theres an issue with the logic on the parser for the logs, once you hit the 13th it bugs out - UK Locale anyway, depends on your date format)
Info here:
If you use the dd/mm/yyyy date format on your Microsoft Active Directory (AD) server, the system sets the Active Directory server status to pending and fails to generate events. As a workaround, use the mm/dd/yyyy format on your AD server. (137315)
Other common issues are as you have correctly stated. Ensure the relevant Windows EventIDs for logon/logoff events are generated in the Windows security event logs.
Also if the agent and DC/FSM are seperated by a NAT device, you need 2 entries in the User Agents section on the DC/FSM. One for the Pre-NAT address and one for the Post-NAT Address.
Thanks,

Need Open Source Sip client(user agent)

Similar Messages

Maybe you are looking for