Need opinion about admin backend with flex

Hi all,i need opinion please regarding admin backend..I've tried to use two viewstack,but when i run it,the other viewstack is below the first viewstack..I post the code on http://www.pastebin.org/3199 .. Please help me..Otherwise,can someone kindly enough to point me the right direction about creating admin backend..Thanks...

In that case, you can simply set the visible and includeInLayout properties for the viewstack that should NOT display to false, based on who logs in.
If this post answered your question or helped, please mark it as such.

Similar Messages

I need information about personal experience with DFS-R: shortcomings and limitaions of DFS-R

Hello,
We plan to install DFS-R in our organization.
I need information about personal experience with DFS-R: shortcomings and limitations of DFS-R.
Thank you for any info.

Hi,
You could refer to the articles below to see some limits about DFSR and some DFSR configuration mistakes which will cause DFSR problems:
Understanding DFS Replication "limits"
http://blogs.technet.com/b/filecab/archive/2005/12/12/understanding-dfs-replication-_2200_limits_2200_.aspx
Common DFSR Configuration Mistakes and Oversights
http://blogs.technet.com/b/askds/archive/2010/11/01/common-dfsr-configuration-mistakes-and-oversights.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Need advice about replacing desktop, with laptop?

I need to replace my old desktop. Know nothing about laptops! Would like to clear my spare room of computer desk and junk! Would a laptop serve the same purpose, as a desktop?
I'm a retired lady and mainly use my computer for email, internet surfing and some games.
I would not use for traveling.
How would I connect to my broadband? Can I plug in without relying on battery? Can I still use my printer?
In other words, can I use a laptop just as use my desktop?
Solved!
Go to Solution.

Hi Patsy. I am confused on why so many are trying to steer you away from the laptop when it sounds like that is just what you are wanting. Personally, I think you would love a laptop. Like you I don't travel all that often, but the biggest advantage of the laptop for me has nothing to with travel and everything to do with the mobility of it within my own home. If I want to lay on the couch and play on the internet, go outside on the patio and read an article or sit in bed and play a game on the computer or watch a DVD, it is no problem. I have had my laptop about a year now and it is hands down more convenient than the desktop in my study.
In answer to a few of your questions, yes a laptop would work with your internet in exactly the same way as the desktop, BUT you would need to purchase a wireless router in addition to the laptop. This router is what allows you to be wireless in your home. You can then plug in anywhere in the house or work off the laptop battery, whichever you so choose. The printer is the same way. You could hook the printer directly to the router or if the printer has wireless capabilities, it could be recognized by your router and be wireless too, meaning it simply needs to be plugged in and not connected to anything else and you could still send documents straight from your laptop to it.
As for computers, if you ever see a poster start talking in detail about graphics cards, more than likely they are high-end gamers. In other words, not simple computer games but very graphic intense games that call for really good graphics cards. From what you describe your use as, which is very similar to mine, you are just wanting it for internet/email, basic computer games and maybe some word processing abilities. Most laptops you get today will probably have a graphic card that supports all you need. The following is just my opinion on laptops based on needs that sound close to mine, so hopefully I won't get jumped on too much by other computer experts. I would encourage you to avoid taking the cheapest route with a laptop. That isn't to say avoid a good deal, just go for a good brand. In my opinion the good brands do not include Toshiba (just personal experience based on several people who have gotten one in the last couple of years and reading up on them before buying) or Gateway (although I think they may have been purchased by Asus as was eMachine, so the quality might be better now. They use to be crap!). I would stick with HP or Dell myself. I have a Dell, which again high end gamers are not as fond of because they have an integrated graphics card. For what you would use it for, a Dell would be more than fine, and they have been around a long time for a reason! That is what my old desktop is too, and they have always responded to my issues, even when not under warranty anymore with that desktop. As for what to look for, you should be able to get a decent laptop for $400-$550, maybe cheaper, but get a little more to the laptop and it will last you a little longer. I would look for something that is a Core2Duo versus simply Dual Core. Try to go for at least 3GB memory, 4GB is better. As to the size of the hard drive, if you mainly just save pictures and documents like me a 160GB hard drive is more than enough, but if higher, even better. The huge retailer that starts with W, which apparently can't be written here, has some good deals on both HP & Dell, and they offer relatively cheap extended warranties. Which by the way, I would highly encourage an extended warranty on a laptop. Here are 2 other good deals I just came across on good laptops {Links removed per Community Guidelines} The 2nd deal has a bigger hard drive and a 17" screen versus a 15.6". The bigger screen means it is going to be a little heavier though. I originally wanted the bigger screen myself, but ended up going with the 15.6" as it was just easier to lug around. They are so close in weight though, I don't know that it would matter that much to some. As to hooking all this stuff up, such as configuring your router, printer etc. If you know anyone that is good with computers it is usually a pretty simple task for them. Most of kids in high school can do it with their eyes closed now. If you don't know anyone, Best Buy has a service called the Geek Squad that will come and do it for you. Have no idea the cost there, but I do know it doesn't have to be purchased at Best Buy for you to buy that service.
Anyway, I know I wrote you a book, but I hope this info help. I really think you will be more than pleased with a laptop once you get the purchase and setup out the way anyhow! Good luck, Leigh.

Need to enable admin acct with user permission..

I have change the acct type and made ID that is disable an admin.. is the only admin acct in my desktop... when ever i tried anything with admin permission. the AUC will pop up but no where to enter my admin Password... run as does not work either.. because
the only admin acct is disabled..... please help... and I have the computer to login automatic on start...

Hi,
Since all administrator account was disabled in your system, there is no way to run a program that need admin rights.
You do need to enable administrator account in Computer Management.
Roger Lu
TechNet Community Support

Need info about bundled soware with Satellite A200-1FJ

Hello all,
is Windows Vista preinstalled?
Do they provide a copy with the laptop?
What about driver disk?
I've just received a recovery disk with my laptop.
Some one bought the laptop for me from kuwait.
Can anyone guide me about the dvd's included with the laptop.
best regards
Murtaza

Hello
I can just confirm what previous user has posted. Recovery DVD delivered with your notebook contains recovery image. Recovery image contains OS, all necessary drivers, tools and utilities. It also contains several different applications like WinDVD (for watching DVD movies) and Norton (make your notebook safe if you want to connect it to the LAN and use Internet).
Every time if something goes wrong you can use delivered recovery media and install OS again. You can do this without any restriction and 1000 times if you want. Very important is that you do not need any registration by Microsoft.
If you have more questions please write again. Good luck!

Need information about FI document with header and no items

Hello Experts!
I need your help for understanding the following subject :
How is it possible when using F.13 to obtain a fi document with header without items sometimes,
and fi document with header and items anothers times?
We didn't saw/found customizing topics about that ( to enable or not header without items) Some exists?
The only difference in the two cases are the document's type involded which are not the same.
Regards,
Josiane

Hi,
We verify and compare everything. it's the same everywhere except the document type of the invoice
first case, F.13 create conciliation fi document with header and no items
invoice ( doc. type YB )
payment ( doc type ZT)
conciliation ( doc type XZ )
2th case, F.13 create conciliation fi document with header and none items
invoice ( doc. type YT )
payment ( doc type ZT )
conciliation ( doc type XZ )
We match / compare every fields and value between invoice of 1st and 2tch case, every fields and value between payment of 1st and 2th case.
( we create tests case in own integration system for reproduce )
We alse match / compare customizing of invoice type document YB and YT and they seems identical...
The procedure is the same with F.13 to do conciliation in both cases.
we got same amount, same currency etc etc.
We still didn't understand why with invoice type YT the conciliation document created is not the same as invoice type YB ...
Nobody have idea ?

Need help about a dll with panel function

Hello,
I try to create a DLL file with a graphical panel, and i want to use it on an other platform with visual c++ compiler.
to release this DLL, i use an UI and generate a code with the option : Tools\UI to Code Converter.
now i have a code which can create a user interface without the file .uir
During the compilation there is no error, but when i want to test/execute it on Visual C++, I have an error message : The memory cannot be read, address 0x00000000.
Someone can help me about this? and if you want my project to see the code, i can give it.
thanks.

One quick question: are you trying to avoid needing to install the LabVIEW runtime on the target machines? If so, I don't believe packaging it in a DLL will accomplish that. (Correct me if I'm wrong, but I think LabVIEW created DLLs still have dependencies on the LabVIEW runtime.)
In general though, I agree with your suspicion as to why it isn't working. One test you could perform to clarify the situation would be to added another VISA write and DLL read in line after the second form in your attached JPG. If the resource is hosed up after your DLL read also, I agree, it would point to the DLL calls causing the resource to hang. Perhaps the process of translating the VISA resource name from a string to the actual resource object causes the VISA session to be tied to the scope of the DLL function call (hence automatically releasing when the call is completed)? If so, maybe passing the actual VISA resource name would help. The VISA resource is really nothing more than a pointer to an object (a LVRefNum). From the perspective of language independence, I think that probably amounts to a 32-bit integer.
Also, perhaps you could just avoid building this level of granularity into the DLLs? The idea of creating a DLL is to abstract away some complex task. I'm not sure what benefit you get of creating DLLs out of such basic functions.
Anyway, good luck.

Need Info about using Strut with WL 7.0

I want to find out how to use it with WL 7.0. Would anyone give me any info about it? :) Thanks


You could download and deploy "struts-example.war" from apache website.
          [That Struts 1.0.2 I think.]
          ---Nam
          Jordy wrote:
          > I want to find out how to use it with WL 7.0. Would anyone give me any info about it? :) Thanks
          And God said
          Let there be numbers
          And there were numbers.
          Odd and even created he them,
          He said to them be fruitful and multiply,
          And he commanded them to keep the laws of induction.
          [Bill Taylor [email protected]]
          [nam_nguyen.vcf]

Need informations about dependency scenario with job chains

Hi,
I created several job chains containing one ora mor scripts.
Now I want to create dependencies between this job chains. For example : job chain 2 must begin when job chain 1 is finished, job chain 3 must begin when job chain 2 is finished etc...
So my first question : how can I do that ? (create dependencies between job chains)
Second point : all this job chains have not the same time periods : example : job chain 1 must execute every day, job chain 2 every monday, job chain 3 every day...... so if i take the example of tuesday : job chain 1 must execute and when it is finished then job chain 3 must execute. On Monday : job chain1, then job chain 2 and for finish job chain 3. How can I do that ?
Edited by: kennel yves on Aug 19, 2009 12:27 PM

Hi Yves,
If your chains are not dependent on each other, you should submit them as separate jobs.
So if you have a chain that runs every workday at 18:00, and another chain that runs on Tuesday and Friday at 14:00, and there are no dependencies between the chains, then you should:
- submit the first chain at 18:00, time window "Workdays", submit frame "EveryDay"
- submit the second chain at 14:00, time window "TuesdaysAndFridays", submit frame "EveryDay" (it will skip the days that the time window is closed anyway)
Same for the other independent chains with different schedules. If there are no dependencies, there is no need to combine chains together.
The first reply was for the scenario where you have chain A and B, A starts at some time and B starts after A. Additionally, B only runs on Tuesdays, while A runs every workday. In that case there are dependencies between the two chains, and then a parent chain is very convenient:
- chain "RunAandB", with two steps
- step 1: call chain A
- step 2: call chain B, with a precondition so that B only runs on Tuesdays.
Regards,
Anton Goselink.

Need opinion about new design of my site

Hi,
please can you tell me what do you think about new design of my site http://www.francistravel.com
I still work on it and still try to improve it.
Thanks a lot,
Petr

I would check the navigation -- when you click e. g. German version there is no link back to the English version. If you try the Czech version and then click the English version link you will not get back to the .com domain but to the .ch domain.

Help with Flex based popup windows and data population.

Hello, I need a bit of help with Flex popups. I have a flex
application that uses a popup window when you click on a button and
displays information about the image above the button the user
clicked. I have about 4 images and I need to be able to display
information about each of them through the popup window when users
click on the buttons below the image.
At this time, I am trying to do this from somewhat of a
"static" point of view because I do not believe my hosting company
supports Flex Data services. You will find my code below.
First File.
<?xml version="1.0" encoding="utf-8"?>

<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" width="850" height="750"
cornerRadius="10" borderColor="#000000"
backgroundGradientColors="[#1b3434, #000000]">

<mx:Script>
<![CDATA[
import mx.managers.PopUpManager;
[Bindable]
private var win:IMSAI;
private function init():void{}
private function createPopup():void{
win=IMSAI(PopUpManager.createPopUp(this,IMSAI,true));
win.title = 'IMSAI.Net';
win.x = -500;
win.y = 0;
customMove.end();
customMove.play();
]]>
</mx:Script>
<mx:Style>
TitleWindow {
borderStyle:solid;
borderThickness:2;
</mx:Style>
<mx:Parallel id="customMove" target="{win}">
<mx:Move duration="2000" xTo="{(stage.width - win.width)
/ 2}" yTo="{(stage.height - win.height) / 2}" />
<mx:WipeDown duration="2000" />
</mx:Parallel>
This is the code to trigger the popup when a user clicks on
the button. The code below is the code for the popup.
<?xml version="1.0" encoding="utf-8"?>
<mx:TitleWindow xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="vertical" creationComplete="init()"
close="PopUpManager.removePopUp(this)"
showCloseButton="true" alpha=".8"
headerColors="[#000000,#1F3F62]" color="#FFFFFF"
minHeight="200" minWidth="300"
backgroundColor="#000000" title="IMSAI.net" width="520"
height="394" verticalAlign="middle" horizontalAlign="center">
<mx:Script>
<![CDATA[
import mx.managers.PopUpManager;
private function init():void{}
]]>
</mx:Script>
<mx:Canvas width="470" height="338">
<mx:Image x="10" y="10" width="140" height="103">
<mx:source>file:///C|/ColdFusion8/wwwroot/IMSAI/Web-App/Site_Images/IMSAI
Final Movie.swf</mx:source>
</mx:Image>
<mx:Text x="10" y="121" text="Description:" width="75"
height="25" fontWeight="bold" color="#ff0000"/>
<mx:Text x="158" y="10" text="Client:" width="52"
height="28" fontWeight="bold" color="#ff0000"/>
<mx:Text x="196" y="10" text="IMSAI Microcomputers
& Fischer-Freitas Company" width="252" height="39"/>
<mx:Text x="159" y="46" text="Industry:"
fontWeight="bold" color="#ff0000"/>
<mx:Text x="216" y="46" text="Computer &
Microcontroller Manufacturing." width="232" height="35"/>
<mx:Text x="83" y="121" text="IMSAI.net is the front-end
web application for IMSAI Computer " width="355"/>
<mx:Text x="10" y="136" text="manufacturing, customer
support, and order processing. Driven by a Microsoft database
back-end, this application includes rich flash forms, site search
capabilities, and flash content. Currently under phase II of a
three phase development plan, the e-commerce logic and processing
capabilities are under development. Once finished, this application
will be able to process orders provide customers with instant order
confirmation numbers, shipment dates, and payment processing."
width="428"/>
<mx:Text x="10" y="244" text="Technologies:"
fontWeight="bold" color="#ff0000"/>
<mx:Image x="100" y="244" width="50" height="50">
<mx:source>file:///C|/ColdFusion8/wwwroot/Sapphire
Development/content/cf8icon.jpg</mx:source>
</mx:Image>
<mx:Image x="244" y="244" width="50" height="50">
<mx:source>file:///C|/ColdFusion8/wwwroot/Sapphire
Development/content/flashlogo.jpg</mx:source>
</mx:Image>
<mx:Text x="53" y="290" text="Coldfusion 8 Enterprise"
height="30"/>
<mx:Text x="230" y="290" text="Adobe Flash 8"/>
</mx:Canvas>
What I want to do is either be able to create a popup file
for each button and photo, or find a way to pass a name like a
button ID that corresponds to a XML data structure and then
provides the appropriate data for the photo. I have tried altering
the first page of code with the "public" declaration to allow for a
second popup file for each button and image, but the IDE won't
allow me to do such because it creates errors stating I can only
have one public declaration of the kind and function above per
application. Help resolving this would be greatly appreciated.
Thank you.

I have an idea of what I want to do. I am just having
difficulty articulating how to go about such. I know I want to find
a way so that if a user clicks on button 1, button 1 will send some
kind of variable. For example, a user clicks Btn1 under a picture.
Btn1 sends some kind of variable or binding to a data structure
which returns the picture's description, price, etc. and calls the
popup to display that data in a form like manner. Then the user
click Btn2 which does the same thing. The only purpose of the popup
is to display the data.
Do I create a data structure with a related name to say a
button name so when the btn is clicked, the a variable title btn1
will prepend itself to the data structure like
{btn1.imagename}
{btn1.price}
{btn1.description}.
I want each btn to call a different set of data about each
picture because right now, the code I have is allowing me multiple
buttons, but is just displays the popup. Is there a way to create a
separate popup window for each button? Thats seems as though it
would be easier. Thank you for your help.

Design one universe vs two universe....need opinion

Hi
Data warehouse consist of 2 Fact table F1 and F2 and 8 dimensions(3 common dimension tables and 5 others).
Fact table F1 and F2 in warehouse have three common dimension table.
I need opinion about how to arrange universe for this data warehouse.
Report consist of measure from both fact tables.
What will be right way : -
1. create two separte universe - one for each fact table.
2. use single universe and use alias for common dimension.
3. use single universe ans use context.
Regards

Hi,
Creating Two Universes will be worst option I guess because it will be more or same like the option 2 you have mentioned. But creating 2 universes will increase the overhead of maintaining two universes.
From option 2 and option 3 you can select any one for such a requirement. I guess the performance of both will be the same.
The Advantage of option two will be that it will never asks for selecting context at run time, such situation might be possible in option 3.
Also, option 2 will take less time to develop as you may not find any loops.
Regards,
Rohit

Integration of ATG with Flex

Hi
I'm new to ATG but have experience with Adobe Flex. I'm thinking about a website with Flex as UI and ATG as the back end. Please suggest the various methods to integrate ATG with Adobe Flex.
Suggestions at the earliest will be really helpful.
Thanx
Bala

same thread:
ATG and SAP integration

Question about mapping a JAVA Interface with Flex

I am using Granite Data Services (Java backend) with my Flex
client.
The Java server has an Interface called
public interface IService {String getServiceName();}
The flex client makes a remote service call on the server
POJO which returns any implementation of the specified interface.
On the flex side I have an interface
[Bindable]
[RemoteClass(alias="com.*****.proxy.pojo.IService")]
public interface IService{function getServiceName():String;}
As shown i am binding it to the server interface.
From the client I make a call to the server and handle the
result as shown below
var serviceInstance:IService =
(remoteO.testInterface.lastResult as IService);
Alert.show("Service Name :
"+serviceInstance.getServiceName());
The call reaches the server and the remote method is being
called however the Alert is not working.
Please Help !!

//Start other thread closeT
System.exit(0)
//code for thread closeT
//wait 10 s
Runtime.getRuntime().halt()
Gil

Need info about nvidia graphics card supported with premiere pro cs5

Hi
I need information about nvidia graphics card supported with premiere pro cs5
If I have a computer(portable) with this video card or graphics card :
nVIDIA® GeForce™ GTX 285M with 1GB DDR3 Video Memory available in Single or Dual (SLi) Configurations
Microsoft® DirectX® 10 Compatible
is it going to support MPE in premiere pro cs5?
Regards,
Vinay

To be clear:
You asked about supported cards. Here is a list of supported cards. Others on this thread are telling you how to make an unsupported card function to some degree using a method that is not advocated by Adobe.

Need opinion about admin backend with flex

Similar Messages

Maybe you are looking for