Need opinion on vantec fans

Hey, I need your opion on those Vantec stealth case fans. I'm planning to replace all my current 80mm fans with vantec since they are hella loud, much louder than my stock cpu fan. Well, let me know what you think or any other fan recommendation.

i have not used the 80mm Stealth's
but im useing 2 120 strealths right now.
thay are vary quiet.  and push a good amount of air.

Similar Messages

  • Design one universe vs two universe....need opinion

    Hi
    Data warehouse consist of 2 Fact table F1 and F2 and 8 dimensions(3 common dimension tables and 5 others).
    Fact table F1 and F2 in warehouse have three common dimension table.
    I need opinion about how to arrange universe for this data warehouse.
    Report consist of measure from both fact tables.
    What will be right way : -
    1. create two separte universe - one for each fact table.
    2. use single universe and use alias for common dimension.
    3. use single universe ans use context.
    Regards

    Hi,
    Creating Two Universes will be worst option I guess because it will be more or same like the option 2 you have mentioned. But creating 2 universes will increase the overhead of maintaining two universes.
    From option 2 and option 3 you can select any one for such a requirement. I guess the performance of both will be the same.
    The Advantage of option two will be that it will never asks for selecting context at run time, such situation might be possible in option 3.
    Also, option 2 will take less time to develop as you may not find any loops.
    Regards,
    Rohit

  • Need opinion on SE38 changing reports developed using report painter

    Hi all,
    I need opinion on whether the report produced using report painter and se38.
    Can i use se38 to modify a report which was produced by report painter?
    Thanks
    William Yau

    Hi,
    You can change it thru SE38, but doesn't serve the purpose,
    if it's regenerated dynamically your code will be over-written &
    there's lot of overhead in change thru SE38.
    Regards,
    Raghavendra

  • I need a heat sink/fan for p7-1254

    my desktop is getting really loud and i need to replace the fan and possibly also the heat sink, but i dont know what to search for. Can you help me?!
    This question was solved.
    View Solution.

    Here it is on eBay:
    http://www.ebay.com/itm/HP-P7-Desktop-CPU-Cooling-Fan-Heatsink-644724-001-/360760738117?pt=LH_Defaul...
    Part No. 644724-001
    HP is out of stock at partsurfer
    If this is "the Answer" please click "Accept as Solution" to help others find it.

  • Qosmio X500-135 - I need a new the fan and keyboard

    I need a new the fan and keyboard on my Toshiba Qosmio X500-135 (PQX33E-044400DN5) laptop!
    The problem is that I don't know what fan or keyboard (nordic) is actually compatible with my laptop (product number etc) .
    So what fan and keyboard I'm I actually suppose to get for my laptop?

    You can you any keyboard which was released for the Qosmio X500 series.
    But if you need an keyboard with an special language layout, I would recommend you to contact the Toshiba authorized service partner in your country to get such compatible parts.
    Do you know the contact data for ASP available in your country?
    In case you need the contact details, check this page:
    http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  • HELPPP need opinion on buying a netbook

    Need opinion
    Solved!
    Go to Solution.

    Link < That's not a bad option, the only downside is that you'd have to find a local store that has it in stock.
    Other than that, the $179 one you mentioned is pretty much going to be your only option in that pricerange.
    If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
    I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
    Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

  • Need opinion about admin backend with flex

    Hi all,i need opinion please regarding admin backend..I've tried to use two viewstack,but when i run it,the other viewstack is below the first viewstack..I post the code on http://www.pastebin.org/3199 .. Please help me..Otherwise,can someone kindly enough to point me the right direction about creating admin backend..Thanks...

    In that case, you can simply set the visible and includeInLayout properties for the viewstack that should NOT display to false, based on who logs in.
    If this post answered your question or helped, please mark it as such.

  • Need opinion

    I've been working on this 2 minute video presentation on Final Cut Express. Here's my problem: there are several titles and texts along with many graphics and small animations. Also included are several HD video sequences. Final Cut and digital video don't like text, graphics and animations so the only good looking part in my presentation is the video sequences. The rest looks like crap. The text and animations looks very fuzzy. So I just heard about iWork. I thought I could build my presentation in iWork. I could import the video sequences, the graphics and the animations. The presentation is a 2 min. self running looping video so I could export it as a Quicktime. This needs to play on a PC (not ideal, I admit). I need your opinion on this. I am on the right track here? How does iWork handle videos? Will I loose quality? Since I will be running this on PCs, is Quicktime the best export alternative? Or should I go with Powerpoint? Thanks for you input.

    Right now you are on the wrong track. Export to PowerPoint sometimes works very well, but often it is so shoddy, that you could as well start from scratch again in PowerPoint. If you intend to show the presentation in PowerPoint, you should always test it in PowerPoint first. And if you have PowerPoint to test it, you may want to create it there instead of in Keynote to save one step.
    QuickTime used to be an excellent solution for what you want to do. However, currently there is a bug, so Keynote presentations exported to QT won't play well on a PC. It is possible (but far from certain) that it is solved in the version of Keynote that came out yesterday. For your needs, you should wait until someone can tell for sure if the Keynote 3 solves the problems.
    PDF can contain movies and make reasonably good presentations as well, but (as far as I know) not the PDF version that can be produced with iWork.
    That said, there are many excellent reasons to buy and use iWork. For your particular needs, however, the current version doesn't work.

  • Need opinion : Tiger Server running on PowerMac G4 (AGP Graphic)?

    Dear Gurus,
    I have a spare PowerMac G4 (AGP Graphic) with 2GB RAM, and a spare copy of 10.4 Server. Is it reasonable to install Tiger Server into this PowerMac? The computer will serve as a file server for about 20+ user (mostly documents, no video or gigabyte psd file).
    The machine meet Tiger minimum system requirement but I need some real life opinion of whether this is okay, or just a bad idea (system will sluggish, etc, etc.)
    TIA

    Server doing File Sharing is an I/O problem, not a compute problem. I have run Server 10.3 on a Beige G3 \[with a SCSI RAID added].
    You need fast Hard Drives and a fast (preferably Gigabit Ethernet) connection to the workstations to get "near Hard Drive" performance.

  • I need opinion on APC surge protector/ backup for Imac

    HI,
    I need an opinion...I have an Imac 24" and printer, scanner,
    and I need to get a surge protector. backup because when is
    raining where I am, is not uncommon for the power to go out...
    APC BR1500LCD 1500VA 865 Watts 8 Outlets BACK-UPS
    or
    Belkin F6C1500-TW-RK 1500VA Dual Form-Factor Battery Backup?
    I have no idea wich one would be best...or if there is a less expensive alternative...
    thanks!

    APC is your best selection, but be sure to get the model that has the high-speed switching. Call APC to find out which model they recommend for use with the iMacs.

  • I need a new primary fan

    Hi,
    I need to replace the primary fan (the one in the center of the motherboard) of my powerbook titanium dvi 867.
    I've found it here:
    http://www.powerbookmedic.com/SUNON-Primary-Fan-Replacement--DVI-models-p-16444. html
    but it's ever out of stock.
    I've also tryed another site pbfix, but it's out of stock here too.
    And i can't find any other place to get it.
    There's no way ot find its dimensions or model?
    Do you think i can replace it with any other fan?
    Thanks

    Here are a few other parts vendors:
    http://www.pbparts.com (parts and repair work)
    http://www.dttservice.com (parts and repair work)
    http://www.powerbookresq.com (parts and repair work)
    http://www.tekserve.com (parts and repair work)
    http://www.powerbooktech.com (parts only)
    If you don't find the fan on their web sites, call them — it may not be advertised.

  • I need to replace my fan

    Hello,
    I was wondering if anyone know where to get a fan for my vga card? I have a geforce 4 ti4800se vtd8x. The fan that was on it quit working. Please help!!!!

    jfelts,
    I would recommend the:
    Vantec "IceBerq" All-In-One VGA & Chipset Cooling Ki
    or the:
    Vantec "IceBerq" Coppery All-In-One VGA & Chipset Cooling Kit
    Take Care,
    Richard

  • Does the Macbook Air need to have a fan under it to prolong its life?

    I just bought a Macbook Air and would like to know if an external fan is necessary as it was for my Macbook. Even with the fan the Macbook would get really hot. I noticed that the Macbook Air gets warm also, but with everything internal being solid state I don't know if the external fan would be beneficial or not. Thanks for your thoughts, in advance.

    Anytime you can keep an electronic device nearer to a preferred temperature, you will do nothing but good for it. In this case, you may make the fan work at slightly lower RPM. Primary cooling of the MBA is acccomplished by means of an interior fan, coupled to a heat sink/pipe leading to the CPU/GPU. This same fan also draws air over the logic board. Interior heat is also expelled, to a lesser extent, by means of being radiated and conducted by the case bottom.
    However, blowing a fan across the bottom is probably the least efficient manner in which to aid cooling of the MBA, especially if you are drawing power from the MBA to run that fan.
    If your goal is to extract heat from the case, you can more efficiently do so if your heat conduction to the case itself is more efficient than air, as the case bottom has a rather low surface area to exterior dimension ratio. There are heat conducting materials suited for contact cooling, such as the Targus Heat Defense Pad. This device also consumes no power from the MBA. The downside is that it is only functional for a finite period, wherein the crystals remain somewhat solidified and are able to take on heat.
    If you are using the MBA for extended periods, perhaps a fan type cooler will offer some help, but don't expect much if it also contributes to heat generation by being powered from the MBA itself. Look for something that actually conducts heat from the case, and uses a fan across a high surface area element to transfer conducted heat to the air.
    But as far as the MBA actually "needing" additional cooling, ...in most cases no. If it were the case, then Apple would be making the recommendation. However, there are definite situations where users are putting much more heat loading than what would be considered "normal", and in such cases, it is definetely something to consider. I use a heat defense type pad from time to time, and it works great.

  • System Fan (90B) - Need Part # for Replacement Fan

    My laptop is booting up to System Fan (90B) error. This is after the fan has been grinding for a while and finally died.
    I need to find out the part number for the replacement fan. The following is the information about my laptop:
    Model Number: LK184AV
    Model Description: HP PAVILIONDV6Z-6100NOTEBO
    Serial Number: 5CH1331LZ0
    Please help.

     (15) Fan/heat sink assembly (includes replacement thermal material):For use only with computer models equipped with an AMD processor: For use only with computer models equipped with an AMD A8, A6, or A4 processorand a graphics subsystem with discrete memory650848-001 For use only with computer models equipped with an AMD A8, A6, or A4 processorand a graphics subsystem with UMA memory650847-001 For use only with computer models equipped with an AMD Athlon, Phenom, orTurion processor and a graphics subsystem with discrete memory640426-001 For use only with computer models equipped with an AMD Athlon, Phenom, orTurion processor and a graphics subsystem with UMA memory640425-001 For use only with computer models equipped with an Intel processor: For use only with computer models equipped with a graphics subsystem with 2048-MBdiscrete memory650797-001 For use only with computer models equipped with a graphics subsystem with 1024-MBdiscrete memory641477-001 For use only with computer models equipped with a graphics subsystem withUMA memory641476-001  Your manual here. http://support.hp.com/us-en/product/HP-Pavilion-dv6-Entertainment-Notebook-PC-series/5111979/model/5138752/manuals REO

  • I need help with SMC fan control?

    I recently installed smc fan control but everytime I open it I can't get the minimum fan speed below 4200 rpm's, anyone have any ideas what I should do?

    You don't need smc fan control, just Mac, more accurate to say SMC automatically control fan at proper speed.
    If it's not proper speed you think, resetting SMC could solve it.
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

Maybe you are looking for