Need opinion regarding table setup on my site

Hi all,
This is my site I am working on:
http://www.norbyson.com
First of all, I have a lot of work to do to it - so go easy
on me!..lol
What I'd like to know is how I should set my table up to
maximize space. I plan to turn the photos into thumbnails along the
margins like the one on the top left corner. I also plan to get rid
of the pop-up photo behavior - I feel it congests the site. That
said, I would like to know how I should set it up so there is
enough room for content - text. The center cells seem a bit narrow
but they should open up once I scale down the images to thumbnails.
I plan to replace the existing map with Google maps. Also, I plan
to replace the navigation area along the left margin with a
navigation bar (using Spry) which will be located below the banner.
Your input on how I should set up the table would be
appreciated.
Thanks.

I would check the navigation -- when you click e. g. German version there is no link back to the English version. If you try the Czech version and then click the English version link you will not get back to the .com domain but to the .ch domain.

Similar Messages

  • Need opinion about new design of my site

    Hi,
    please can you tell me what do you think about new design of my site http://www.francistravel.com
    I still work on it and still try to improve it.
    Thanks a lot,
    Petr

    I would check the navigation -- when you click e. g. German version there is no link back to the English version. If you try the Czech version and then click the English version link you will not get back to the .com domain but to the .ch domain.

  • Regarding table VBEPDG- Dangerous goods

    Hi Friends.
    I need help regarding table VBEPDG.
    Can anybody tell me how entries are made in table VBEPDG? Whether its configuration table or master data table?
    In my purchase order an item has been wrongly marked as dangerous material,
    and this is leading to table VBEPDG.
    Thanks in advance.

    Dear Saketpanse,
    the table VBEPDG contains the schedule line data for the dangerous goods. If the material is not dangerous then the entry should not be created. Probably the material initially was classified as a dengerous one and is currently changed to the non-dangerous. Am I correct ?
    In this case the entry in VBEPDG will remain because during creation of the order the material was dangerous. Quite generally, SAP does not recommend to change Customizing or Master Data in the Life-system. It can cause many inconsistencies. The correct way to do such a change would be to reject all sales documents which could be affected by such a change, then do the change and then create the sales documents again. It is for the future.
    Concerning the current inconsistency. The correct way would be: to indicate the material temporary as a dangerous one again, then delete the sales order item, and then to indicate the material as a non-dangerous one and create the item again. If you have already subsequent documents, then you can only reject the item. Then the VBEPDG entry will remain, but will not disturb you anymore. Alternatively, you can write a simple ABAP report, which deletes the VBEPDG entry.
    I hope, that this information will help you a little bit further.
    Kind regards,
    Akmal Vakhidov
    Development Support SD, SAP, Walldorf/Germany

  • Design one universe vs two universe....need opinion

    Hi
    Data warehouse consist of 2 Fact table F1 and F2 and 8 dimensions(3 common dimension tables and 5 others).
    Fact table F1 and F2 in warehouse have three common dimension table.
    I need opinion about how to arrange universe for this data warehouse.
    Report consist of measure from both fact tables.
    What will be right way : -
    1. create two separte universe - one for each fact table.
    2. use single universe and use alias for common dimension.
    3. use single universe ans use context.
    Regards

    Hi,
    Creating Two Universes will be worst option I guess because it will be more or same like the option 2 you have mentioned. But creating 2 universes will increase the overhead of maintaining two universes.
    From option 2 and option 3 you can select any one for such a requirement. I guess the performance of both will be the same.
    The Advantage of option two will be that it will never asks for selecting context at run time, such situation might be possible in option 3.
    Also, option 2 will take less time to develop as you may not find any loops.
    Regards,
    Rohit

  • Need inputs regarding the dvd drive on primary ide channel.

    Specs:
    Motherboard: MSI P35 Neo3 (MS-7935 1.0)
    CPU: Intel Core2 Duo E6550
    Memory: Team Elite DDR2800 (2x1GB Dual Channel)
    Hard drive: Seagate Barracuda 7200.11 500GB 32MB Cache (SATA)
    Optical drive: LG GSA-H55L (IDE only) Firmware version 1.02
    Graphics card: Gecube HD3870
    Chipset: Intel P35/G33/G31 (Rev. A2)
    Southbridge: Intel 82801IB (ICH9)
    LPCIO: Fintek F71882F
    BIOS: AMI V1.1 (11/07/2007)
    Hello,
    Almost all new motherboards today only have a primary ide channel and the rest are SATA.
    I need inputs regarding the dvd drive which is shown in device manager as located on the primary ide channel while the hard drive is located on the secondary channel. Because I would like to update the dvd drive to the latest firmware (version 1.06; to be able to recognize more blank media) but the LG site recommends that the drive (dvd) be located on the secondary ide channel.
    I already tried to uninstall every channel from the device manager but all would still be the same after reboot, dvd drive on primary, hard drive on secondary.
    Current ide mode in BIOS is set to AHCI+IDE mode, DMA modes are fine (UDMA4 for dvd, UDMA5 for hard drive), boot sequence (1st=HD, 2nd=DVD, 3rd=Floppy drive)
    Tried switching to IDE mode only in BIOS but would not detect the optical drive. Never tried RAID+IDE mode since I only have a single hard drive.
    I'm not sure but if I try to update the firmware, it might instead try to update the hard drive's firmware instead of the optical drive and make the hard drive unusable.
    I would like to know if anybody with this same situation was able to successfully update the optical drive's firmware or is there some way to place the optical drive on the secondary ide channel and the hard drive on primary for me to follow and replicate the process.
    Thank you for any replies.

    Thanks sir NovJoe for the reply.
    Just received the solution from another forum where I posted the same problem.
    They said that the flash program for the firmware will detect the drive on its own and would not flash other devices except the optical drive itself. So its pretty safe, and I can confirm this since I just flashed my ODD a little over a while ago and everything went fine. No errors.
    Though I'm speaking for the brand of ODD I own and may be different for other brands so take precautions as well. It may be different for the others.

  • How to setup three SharePoint sites on one server?

    Hello,
    How to setup three SharePoint sites on one server?  I have three sites like:
    http://site1
    http://site2
    http://site3
    And need to have them running up on one server. I recall some changes need to be done to the host file, but not sure.  Can you advise on what to change?
    Thanks,
    Paul
    Paul

    you need to make entries in DNS to get this done.
    check here:http://spshare.blogspot.com/2012/05/how-to-create-host-header-web.html
    nice blog with step by step explanation:
    http://thuansoldier.net/?p=1323
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Need HELP regarding installinfg CR2008/Visual Advantage

    I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
    HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
    I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
    HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
    HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
    Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

    Hi Shamish
    Actually you were on the right track, i think you just have to increase PSAPTEMP a bit and you will be fine. 358 MB seems just too small, i suggest you increase it to at least 2GB.
    1. what will be the difference in use of PSAPUNDO and PSAPTEMP while copy is running. ( i.e. what will be entered in PSAPUNDO and what will be filled in PSAPTEMP.)
    PSAPTEMP: is needed for large sort operations, as mentioned when you have a select with an ORDER BY clause, or if you do join two tables. During the client copy some sorting might be needed for special tables (cluster tables) where data is stored sorted.
    PSAPUNDO: undo space is only needed for DML (data manipulation), if data is changed undo is generated. This obviously is heavily the case during a client copy.
    2. the target client already has a copy taken 1 month before. so I think while importing it first delete existing data and then copies the new one.
    So If I first delete the target client and then take import on it; will it have advantage in regards of getiing UNDO or TEMP segments getting filled ?
    Deleting the client first might help for the undo problem, but you already solved that. I cannot imagine, it will help for the PSAPTEMP issue. As i said i would just increase PSAPTEMP and restart the copy.
    One more add: if you are doing the client copy with parallel processes, this will influence your requirements on temp and undo space, because of the concurrently running processes.
    Best regards
    Michael

  • Can another site be loaded into a table cell on my site?

    I would like the user to click on a button that would cause
    "website_A.com" to open inside of a table cell on my site. Is that
    possible. If not is there another way to do it?

    You would need to use an inline frame or iframe.
    <iframe id="Frame1" iframe name="Frame1" src="
    http://website_A.com"
    width="100%" frameborder="0" scrolling="auto">
    </iframe>
    http://www.w3schools.com/TAGS/tag_iframe.asp
    --Nancy O.
    Alt-Web Design & Publishing
    www.alt-web.com
    "relief8" <[email protected]> wrote in
    message
    news:g02k90$702$[email protected]..
    > I would like the user to click on a button that would
    cause
    "website_A.com" to open inside of a table cell on my site. Is
    that
    possible. If not is there another way to do it?

  • Need to create Table Maintenance with more than 400 characters

    I need to create table maintenance in which one filed have more than 400 characters. CHAR type support between 1-255 & STRING type not supported by Table Maintenance. Is there any alternative type or solution for that?

    Hi,
    If  you assign TMG to the table, it will throw error as unable to display the field on screen. why because it can able to display upto 255 char length only.
    For this requirement you have 2 solutions :
    1) Create multiple fields and your Z table, split the data and store them as required.
    2) Create a TEXT ID and store it as a long text using FM CREATE_TEXT.
    or
    This type of text should be treated as Long Text.
    And the steps are:
    1. Create Text Object Using SE75.
    2. Create Text ID Using SE75.
    3. Now you have to Save the text with FM SAVE_TEXT.
    For example:
    The Most simple solution for it can be that Divide the field REMARKS of size 1000 in multiples of 200 characters like REMARK1, REMARK2....REMARKn.
    Now you can create two FMs :
    zset_data: To Store 1000 char long data in Table
    Here you will divide the data of Variable (type char1024) in multiples of 200 and will store in REMARK1, REMARK2.....
    zget_data: To Get 1000 char long data back from Table
    Here you will concatenate REMARK1, REMARK2..... and will store in Variable of Type char1024.
    This is the best solution if Table is not going to be maintained by Table Maintenance Generator.
    regards,
    ravi

  • Help needed for SAP Tables Relationships

    Hi All,
    I am new to ERP and need help regarding standard SAP Tables.
    Please share the document that contains the details of SAP Tables and Standard SAP FM that are provided by SAP.
    All helpful answers will be rewarded.
    Regards,
    Udaya.

    Hi,
    Please go to the following link.
    http://www.erpgenie.com/abap/tables.htm
    http://www.erpgenie.com/abap/tables_sd.htm
    http://www.erpgenie.com/abap/tables_mm.htm
    http://www.erpgenie.com/abap/tables_fi.htm
    Regards
    Jean

  • Regarding Table Maintainance

    Helo All. I have a query regarding table maintainance.
    I have created a transaction for a table, and allowed only SHOW and VIEWNAME in default values.
    Still it is allowing to update the table.
    Can you tell me why?
    Thanks in advance !!!

    Your transaction is just calling SM30, even though you specify these defaults all of functionality of SM30 is available.
    To limit access to the table to display only you would need to either apply the authorisation concept (set an authorisation group in the table maintenance settings and restrict user access) or write a simple list report that displays the table contents and link that to a transaction.
    Regards,
    Nick

  • I need help regarding installation of Netweaver 2004s

    Hi,
    I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
    " SAPinst is getting started.
    Please be patient ...
    starting gui server process:
      sapinstport: 21200
      guiport    : 21212
      guistart   : true
      command    : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
    load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
    guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
    guiengine: login in process...............................
    guiengine: login timeout; the client was unable to establish a valid connection
    Exit status of child: 1"
    Regards,
    Farooq Shaik.

    Hi
    Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver.

  • Need opinion on SE38 changing reports developed using report painter

    Hi all,
    I need opinion on whether the report produced using report painter and se38.
    Can i use se38 to modify a report which was produced by report painter?
    Thanks
    William Yau

    Hi,
    You can change it thru SE38, but doesn't serve the purpose,
    if it's regenerated dynamically your code will be over-written &
    there's lot of overhead in change thru SE38.
    Regards,
    Raghavendra

  • I need to know table for field CLASS , which is coming in cl30n

    Hi,
          I have to create a report customer meterial price.For this I need  one coloumn i.e  Finished Good material(coming from cl30n transaction and field name CLASS). I want to know in which table this field  "CLASS" is getting stored.AS I am getting 
    structure CLSELINPUT  where this field is stored but I need to know table .
    Regards.

    Hi Ian ,
                  Thanks for your support.I need to fetch spare part meterial on basis of this class .which is the correct  table to get spare parts details and how we can link klah with it.
    Regards.

  • Need Help regarding text Output

    Dear gurus.
    I need help regarding formatting of a text.
    I want to format a employee sub group text.
    im getting a text workers (7) from a table t503t having field ptext.
    i want to show only (7) in the output not the whole text how can i do this ?
    Please help
    regards
    Saad.Nisar

    DATA: BEGIN OF itab_odoe OCCURS 0,
      department_text LIKE t527x-orgtx,"Holds the short text for department
      department_no LIKE pernr-orgeh,
      pernr LIKE pernr-pernr,
      ename LIKE pernr-ename,
      grade like t503t-ptext,   "THIS AREA GET ME TEXT OF EMPLOYEE SUBGROUP"
    *  department_text LIKE t527x-orgtx,"Holds the short text for department
      current_year LIKE sy-datum,
      wt0001 LIKE q0008-betrg,"Basic Pay
      wt1101 LIKE q0008-betrg," COLA
      wt3002 LIKE p0015-betrg,"Overtime
      per_basic type p DECIMALS 2,"Overtime percentage on basic
      per_basic_sum type p decimals 2,"Overtime Sum Division
      overtime_sum LIKE p0015-betrg,"holds sum of overtime
      basic_sum like q0008-betrg,"holds sum of basic
    END OF itab_odoe.
    Im using the select statement to get the employee subgroup from the table
    select single ptext
        from t503t
        into itab_odoe-grade
        where persk eq pernr-persk
        AND SPRSL eq 'EN'.
    now in itab_odoe-grade the values comes is Workers (7) , Snr Mgt (M3)
    i want to show only the text in Brackets.

Maybe you are looking for