Need oracle 10g software to install on OS windows 7

Hi,
Need oracle 10g software for install on OS windows 7.

You can download the file from
http://www.oracle.com/technetwork/database/10203vista-087538.html
and install the same with ignoreSysprereqs option at command line.
However, for a certified combination, you need to download 10.2.0.5.0 patchset (patch 8202632) from Metalink and apply on top of this installation.

Similar Messages

Error in GetCurrentDir(): 13 when installing oracle 10g software

Hi Basis Expert,
We are doing an Mock System Upgrade.
So now we are installing
Before upgrade
BW 3.5 with oracle 10g (10.2.0.4)
After upgrade
BI 7.0 with oracle 11g (11.2.0.4)
When installing the Oracle 10g software we are getting an error
Error in GetCurrentDir(): 13
Error in GetCurrentDir(): 13
Error in GetCurrentDir(): 13
Starting Oracle Universal Installer...
Our OS is AIX 5.3
Please help us in fixing this issue
Regards,
Anil Shenoy

[While Installing Oracle software facing "Error in GetCurrentDir(): 13" [ID 378393.1]|https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=378393.1]
Solution
In order to get rid of this problem, please check for the following.
1. You are logged in as the oracle user and group which owns the oraInventory (if this is not the first install on this system)
2. You have read/execute permissions on the source files/directories (CD-ROMor CD-ROM image)
3. You have write permissions on the target directory (ORACLE_HOME)
4. When the target filesystem for ORACLE_HOME is unmounted the directory for the mount point has rwx permissions for the oracle user
If this is the first Oracle software to be installed on this system you can ignore item 1 as it will create a new oraInventory with the correct permissions. For item 4, unmount the filesystem and "chmod 777" the directory used for the mount point, then remount the filesystem. Item 4 is actually a somewhat frequent issue on AIX.
If none of the above solves your problem, the only alternative left would be, to copy the Staging directory (Disk1 of Install) to /tmp directory and proceed with the installation.

E-Business Suite R12 Oracle 10g 32 bit to 64 bit windows migration

Hi friends;
I just published Step by Step E-Business Suite R12 Oracle 10g 32 bit to 64 bit windows migration pdf on my blog wiht screen shoot,error message etc.
Hope it helps forum user who need to perform this issue
http://heliosguneserol.wordpress.com/2010/11/22/step-by-step-e-business-suite-r12-oracle-10g-32-bit-to-64-bit-windows-migration/
Regard
Helios

Hi Hussein Sawwan
Good stuff .. Thanks for sharing this experience with us.Thanks for your kind words.
Regard
Helios

Oracle 10G Non-Network install - OEM will not start when on the LAN.

Greetings,
Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
===========================================================
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered for the loopback adapter.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer
==========================================================
In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.110.250 IBM-6AB1330E158
==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
IP_address hostname.domainname
- not -
IP_address hostname.domainname hostname
Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
Thanks in Advance for any help,
ADG13

I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
fwiw,
ADG13
C:\Documents and Settings\Administrator>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : IBM-6AB1330E158
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ibm.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.110.250
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-11-25-13-96-AF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 65.24.7.3
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
Ethernet adapter AGN Virtual Network Adapter:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . : AGN Virtual Network Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-01
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 9.49.217.159
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 9.49.217.159
DNS Servers . . . . . . . . . . . : 9.0.2.1
9.0.3.1
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

Need Oracle 10g & 10g AS advice in Delhi

We have a developed a MIS software related to HARD/Road/Bridge/Building with Inventory and project monitoring. The Software is complete as per Client Server Architecture. Presently we have Oracle 9i , Windows NT/2003 Server, 32 bit .
We require to migrate it to 10g and deploy it on Oracle 10g application Server and impart training to the users/ developers .
I[b] am seeking someone from Delhi region to provide me some IMMEDIATE technical ONSITE support . .
Technical details
(1) Oracle 9i: Ver Rel2 (9.2.0.1.0) for windows
(2) Server 512 MBR, present OS is NT4.0 we are upgrading it to Windows 2003
(3)(report and forms have been designed by d2k- form6i/report6i
One may call me at +91 9830251150 . Pls ask your friends / contacts if they could assist us .

First, you will not be able to install a Database and Application Server on that server with 512MB RAM. Secondly is this definitely NOT the kind of forum where you should make commercial advertisement, spamming etc. If you need a resource, I advice you to call Oracle Consulting directly.
Regards,
Martin

Oracle 10g Client R2 Install

Hi,
I have recently installed the Oracle 10g Database release 2 and now want to install the client. I would like to install the client on the same pc as one of my standard users so I can write scripts(using sqlplus) and run them as this user, but the original oracle home was installed as oracle:oinstall. How should I proceed?
Thanks,
Chris.

You don't need client for this. You could use binaries from existing database installation.
Just setup the enviroment (ORACLE_HOME, LD_LIBRARY_PATH and other oracle variables except ORACLE_SID) and PATH for other user and it is done.

Upgrade steps needed - Oracle 10g to Oracle 11g in RHEL 4

Hello,
Am in the process of upgrading oracle 10g with 10.1.4.3 IDM,10.1.0.5 DB and 10.1.4.2 portal version to Oracle 11g. Now I see that there are some compatibilities in the OS. I have RHEL 4 and when I check the compatibility guide I see that it is possible to install/upgrade the oracle to 11g. But am worried on the kernel and packages which is needed for Oracle 11g. If there is any step by step assistance on this please guide me. Also I have an another query can I upgrade the OS RHEL 4 to RHEL 5 and then Oracle 10g to Oracle 11g. Will I be seeing any issue after the OS upgrade with product upgrade. Kindly advise me.
R/Ganesh

This is all about libraries, some libraries between RHEL 4 and 5 had change and this may lead to malfunction of some products, cause they have been copiled using old libraries that doesn't exist now, even I think in the upgradres there are compatibility modes where let you keep old libraries, anyway seems a difficult thing to do. If you plan to move RHEL 4 to 5, I think this is your first step and then install again the Portal in the old version, and then make the upgrade, If you make this step by step, as firts install RHEL 5, install db, install portal, upgrade DB and finaly upgrade portal, would be easier. You may want to read the Master note for this upgrades in oracle Support 873751.1
Greetings.

Is Oracle Client 10 part of Oracle 10g Developer Suite install?

Hello,
I am currently using Oracle Client 9i for Business Objects. I suppose once I move to Oracle 10g Developer Suite, I'll need to move this to Oracle 10g Client. Is this a separate install from the developer suite?
Thanks.

A Developer install should be including it's own Oracle Client -- ie Oracle_Home. That is how I've seen it in older versions -- haven't done Developer installs for quite a few years now !
See http://download.oracle.com/docs/cd/B25016_08//doc/dl/core/B16012_04/chap2.htm#i1018939 and http://download.oracle.com/docs/cd/B25016_08//doc/dl/core/B16012_04/chap3.htm .
The 10g Developer install is expected to be seperate from existing ORACLE_HOMEs

Oracle 10g 2 problem install on Solution manager

Hi,
I'm installing Sap Solution Manager 4 on Red Hat Enterprise
Linux ES release 4 (Nahant Update 5) with Oracle 10g 10.2.0.1.0.
I have an Oracle error message :
/oracle/SM1/102_64/lib32//libnls10.a(lxecg2e.o)(.text+0x681): In function `lxecg2e':
: undefined reference to `ldxdtd'
There are a lot of message of this type with different end of message :
/oracle/SM1/102_64/lib32//libnls10.a(lxecg2i.o)(.text+0xf0): In function `lxecg2i':
: undefined reference to `ldxnbeg'
But it's always a problem with libnls10.a(lxecg2i.o)....
Someone have alreaday had this problem before?
Thx for all.

you should install 10.2.0.2 with latest patches.
please read Note 871735 - Current patch set for Oracle 10.2.0

Oracle 10g can be Installed on Windows 7 64 bit os

Hi
Is it possible to install oracle 10g/11g on windows 7 OS /windows vista 64 bit os
Regards
Pavan Kumar

Oracle 11g works like a champ on Win7. During the install, when you get that error regarding Windows Vista 6.1, you will see a small check box next to the error message. Simply check the box next to the error. It will designate the error as "User Verified". Then you can continue your install.
Be warned, this is not a certified configuration. Soooo....
Problem solved.
Pete

Info about Listener for oracle 10g and 11g installed on single systm

Hi,
I have installed oracle 10g n 11g on my system. I have question regarding oracle listener.
oracle 10g , Listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = kankala.kalyan)(PORT = 1521))
oracle 11g, Listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
(ADDRESS = (PROTOCOL = TCP)(HOST = kankala.kalyan)(PORT = 1522))
my question is why the listener's names are same even though thy are on different ports?
and for people worrying, why i have installed 10 n 11 is
Initally only oracle 11g was installed on my system. Later, I was learning forms for first time and i have to connect to database frm developer suite 10g. so i installed oracle 10g database.

The names are the same because that is the way you created them.
If you want to make a change use NETCA to drop and recreate one of them.
Just make sure you've defined ORACLE_HOME correctly before you do it.

Oracle 10G error - while installing 4.6C

Dear all,
I have tried installing 4.6c directly in oracle 10g in a HPUXIA64 server.
I followed the note 946141 and did the central instance and also installed Oracle and upgrade it to 10.2.0.2 then applied the interim patches.
After applying the interim patches I started the DATABASE.R3S file and it has loaded the data successfully and also statistics update was done successfully.
But it fails to start the database. when I checked the alert log it says.
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Wed Dec 5 21:54:29 2007
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Can anyone help me to solve this issue
Regards
Senthil

Thank you very much for your help Markus.
The installation was complete and was able to start sap.
But I got an error in the last step. mentioned below.
Enter CONT to continue with R3SETUP now.
Enter EXIT to exit R3SETUP, update the MNLS tables and afterwards restart
R3SETUP to continue the installation procedure.
      (1) Continue installation
   -> (2) Exit
Please select one of the options by entering the preceding number
or confirm default [2]: 1
INFO 2007-12-07 20:05:01
    Starting the SAP system on the central instance
INFO 2007-12-07 20:05:01
    Starting up the SAP System
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.79 03/08/22 46D - hpxOscol 07/2003
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
Starting collector (create new process)
could not move /usr/sap/tmp/dev_coll to /usr/sap/tmp/dev_coll.old
saposcol on host cpchpsap started
Checking SAP R/3 DV2 Database
Database is running
Starting SAP R/3 Instance
Startup-Log is written to /home/dv2adm/startsap_cpchpsap_00.log
Instance on host cpchpsap started
INFO 2007-12-07 20:05:39
    Initializing the Workbench Organizer with RFC
INFO 2007-12-07 20:06:18
    Creating Database-Specific Objects with RFC
ERROR 2007-12-07 20:06:50 RFCRADDBDIF_IND_IND InstallationDo:0
    Phase failed.
ERROR 2007-12-07 20:06:50 Main
    Installation aborted.
Not sure what this step does?
How do I proceed?
Thanks & Regards
Senthil

How to install Oracle 10g Database (Silent Mode) on Ms. Windows

Hello,
I need to find out how to run a silent mode installation for Oracle 10g Database. I could perform such an installation for Oracle EX because I could found the installation guidelines.
I need some document to guide me from scratch, how to write response files, etc.
Thanks in advance!!

Hi,
this would help;
http://tinyurl.com/ybzvg4v

Do we need all those software pre-installed with N...

If you look at the application manager after you install V30 firmware, you will see that there are many software pre-installed with it.
When the phone starts, the main standby screen goes out for a second now, and it is obvious that these programs use alot of phone's resources.
Do you keep them? Or have you already deleted them? If you have, which ones? Do you think we need them? Or if we deleted them the phone might not work properly?
I just think that those software use alot of phone's resources. They were not there with V20 or V21.
Any Suggestions? Thank You.

20-Sep-2008 12:55 PM
grschinon wrote:
I know I have noticed it once or twice but it doesn't bother me really. As long as it only does it on the standby screen and not while watching a video, for example (which is the case as far as I can see), I'm not really sure what the problem is. And yes, the screen does go blank for a second or two at startup, but there too it's only once so it doesn't bother me either.
A lot of the software can be got rid of. You can start by uninstalling N-gage if you don't have any intention of using it. That will also get rid of a certain number of other things in the application manager. I also got rid of the "Welcome!" application and the "settings wizard". All in all that'll removed about 15MB of stuff.
This screen refreshing does seem to be doing it only on "Standby Screen." Not during other activities such as watching a video or something. But it is so rare, so nothing really bothering though. I just wanted to let people know not to panic, that's all. You may see it someday.
About uninstalling software, what about those weird programs like adlib, stuff like that. Do you think I can delete everything on Application Manager?

Need Oracle 10g/11g Form Builder Kit

I am planning to give an exame !Z0-141 for Oracle form developer. I don't have Oracle Official Kit. If anyone has and interested to sale me, please let me know. You can reach me at my personel email [email protected]

The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence. Well, in my opinion, a higher market share does not reflect the quality or reliability of a product. Take MS Windows for example. Unfortunately, the reason for success is often not due to knowledge and experience, but rather due to fear and sheep effect or herd behavior.
Perhaps you can use other arguments or questions to help you to make a decision, eg.:
Oracle has a better understanding of what Oracle products require than Red Hat.
Oracle takes full responsibility for the OS and Database, no finger pointing.
Oracle tries to provide a better product than the RHEL kernel.
The Oracle UEK kernel contains Oracle driver software, not available for RHEL 6 or later.
Oracle updates are free of charge, RHEL requires a subscription.
Oracle as a company is about 20 times bigger than Red Hat.
There can be reasons that require the use of the original RHEL kernel, for instance if the vendor of a specific driver for your hardware demands it. But otherwise...

Need oracle 10g software to install on OS windows 7

Similar Messages

Maybe you are looking for