Need OWA solution for Q10

Our IT department only supports OWA for remote access to email. Activesync is not enabled and will not be enabled. POP and IMAP are also not allowed. I upgraded from my Bold to Q10 and now cannot access email remotely. Why is there no solution for this Blackberry? Below is from KB03133. Why is blackberry assuming IT departments will have activesync enabled.
Note: BlackBerry 10 does not support integration of Outlook Web Access email accounts. However, most Outlook Web Access accounts will have Active Sync enabled. To determine if Active Sync is enabled and to confirm the settings, contact the IT administrator for the account.

All the IT departments I know of either use BES exclusively or they enable ActiveSync. There is no other solution I know of for BlackBerrys. BB10 was designed specifically with AcitveSync in mind.

Similar Messages

My blackberry messenger doesn't work its needs and update for q10

my blackberry messenger says that it needs an update and it doesn't work for Q10 and when i search for update it shows that there is no update available than you

Hey,
Welcome to the BlackBerry® Support Community Forums.
To better assist you can you please provide the full error message you receive when attempting to launch BlackBerry Messenger?
Thank you.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Need a solution for integration BPM and UCM 11.1.1.4?

Hi all,
Currently, I am using BPM & SOA 11.1.1.4.
Could somebody advise me a solution for integration BPM and UCM ?
I heard somebody said that need to wait to BPM 11G patch set 5 (11.1.1.6) version, which have basic BPM and UCM integration and haven't to using external API like RIDC or CIS.
Thanks & Regards.
Ming Nguyen.

Do not use prebuilt binaries, but compile the package from source with the current libudev.
sha256sums=(SKIP)
source=("$pkgname::git+https://github.com/rogerwang/node-webkit.git#tag=nw-v$pkgver")
to build it in the PKGBUILD, use nw-gyp i guess.
Last edited by progandy (2013-06-21 22:54:36)

Need a solution for my problem. My stuff seems to be gone.

Hi.
I have an annoying problem which I solution for. When I started my laptop and logged in on my account, (there are two, my account's the administrator) everything on my desktop seemed to be deleted. But when i looked in C:/ it was still there, all the foto's
music and stuff. Before the problem, i had a background for my desktop and many shortcuts. Now i dont have any shortcut and when i go to library's, it says that the folder is empty. But when i go to -DELL is my account- C:/Users/DELL/pictures, every picture
seems to be there. What's also weird is that when i log on to the other account which isn't an administrator and which i don't use that often, nothing has changed.
PS: I have a windows 7 laptop
Please help
(sorry for bad english)

Wahh Wahh stfu I never asked anyone to my work for
me. All i asked for is help. If you read your first post and honestly consider it to be a reasonable request for help, rather than a lazy twat whining to have his work done for him, then you need even more help in basic communication than you do in computer science.
Apparently the people
that fill this board are just too good to help or put
anyone in the right direction to help.And yet, thousands of people get lots of very good help here. So is it just random whim, or do the people who get help do something different than knobgobblers like you?

I need a solution for the deprecated readLine() method .

import java.io.*;
import java.net.*;
class UC {
public static void main(String args[]) throws Exception
DataInputStream inFromUser = new DataInputStream(System.in);
DatagramSocket clientSocket = new DatagramSocket();
InetAddress IPAddress = InetAddress.getByName("hostname");
byte[] sendData = new byte[1024];
byte[] receiveData = new byte[1024];
while(true)
String[] sentence = inFromUser.readLine(); /* It says the readLine() method is deprecated. what is the solution for this? */
          sentence.getSubstringBytes(sentence,0, sentence.length(), sendData, 0);
//sentence.getBytes(0, sentence.length(), sendData, 0);
DatagramPacket sendPacket = new DatagramPacket(sendData, sendData.length, IPAddress, 9876);
clientSocket.send(sendPacket);
DatagramPacket receivePacket
= new DatagramPacket(receiveData, receiveData.length);
clientSocket.receive(receivePacket);
String modifiedSentence =
new String(receivePacket.getData());
System.out.println("FROM SERVER:" + modifiedSentence);
     public void getSubstringBytes(String sentence,int space,int Size,byte[] sendData,int space)
               byte[] bytes=sentence.getBytes();
               System.arraycopy(bytes,0,sendData,0,sentence.length()-0);
}

Sorry, It should be the BufferedReader , not BufferedInputStream.

I need a solution for a lab view apllication and installer problem

I ,ve already deployed an application and an installer, when i run the executable and the installer on my laptop it run well,
but when i run them on a computer that does'nt have a labview it gives me a messege says that i need to install the labview run time engine 8.5
actually i 've included the run time engine to the installer and i 've installed the run time engine from labview 8.5 cd,
but it still give me the same messege.
information you might need:
I'm using in my project the following:
-network shared variable
-data base connectivity functions
-report generation functions
-visa functions
so if any one can help me with this up?????????
Mahmoud Alshair
Intelligent Systems Integrator ( ISI )
System Developer
Solved!
Go to Solution.

Dear Mahik
I 'll post some snapshots of my project here so you can checke it out.
just let me tell you that when I run my app. & my installer on a computer that has a lab view and DSC it works well,
but when I run it on computer that doesn't have a labview it gives that error messege.
i'm hopefullt waiting for your reply with some solution
thanx
Mahmoud Alshair
Intelligent Systems Integrator ( ISI )
System Developer
Attachments:
Building My App.2.JPG ‏80 KB
My Project.JPG ‏118 KB
Building My App..JPG ‏88 KB

I need a solution for node-webkit and libudev.so.0

Hello there!
I'm developing the package of node-webkit in the aur. Since the first time I had trouble with libudev.so.0. The first quick fix was to generate a symbolic link to libudev.so.1, but this is not the best way and can destabilize the system.
The symbolic link is the recommended workaround for this problem at the moment. I don't think there will be a fixed version in the near future. By reading the issues on the bugtracker of node-webkit I found a solution by using a start-script and rewrite the LD_LIBRARY_PATH. This variable is missing in Arch, so I thought, I can add a file into /etc/ld.so.conf.d/. It's not what I wanted, because the library is then globally accessible, but it works on my machine.
I think there must be a better solution. Best choice would be a shell startscript in my opinion, but I don't know how.
My own package of libudev.so.0 were be deleted with the comment: "it is not needed, you can just provide a symlink to libudev.so.1". One say this, another say whatever -.-0 It's annoying. I really want a solution!
Here is the PKGBUILD:
pkgname=node-webkit
pkgver=0.6.0
pkgrel=2
pkgdesc="node-webkit is an app runtime based on Chromium and node.js."
arch=("i686" "x86_64")
url="https://github.com/rogerwang/node-webkit"
license=("MIT")
depends=("alsa-lib" "gconf" "gtk2" "nss")
optdepends=("nodejs: npm package support"
"nw-gyp: native add-on build tool for node-webkit")
if [ "$CARCH" = "i686" ]; then
_arch="ia32"
sha256sums=(
"4b3f45cbb023d043955620a1f84b239249ac00a2649834c0c675d1574462f307"
"c77f5c8bcbce1c8f12d574538845ff5b467fd1acc9e5998f459abcf6b4b7fec3"
fi
if [ "$CARCH" = "x86_64" ]; then
_arch="x64"
sha256sums=(
"a8fb4c045cc5de78d1ac784c50c1eda986d6ccbe82778f6285c5da1bfceda64e"
"fe517d0cf7f374477fcbd654b57f1bc8660069c522625bb06f4d5fc565fdede3"
fi
source=(
"https://s3.amazonaws.com/${pkgname}/v${pkgver}/${pkgname}-v${pkgver}-linux-${_arch}.tar.gz"
"http://arm.konnichi.com/core/os/${CARCH}/udev-182-4-${CARCH}.pkg.tar.xz"
package() {
msg2 "create path and copy files"
mkdir -p $pkgdir/{etc/ld.so.conf.d,usr/{lib/${pkgname}/lib,bin}}
cp -R $srcdir/${pkgname}-v$pkgver-linux-$_arch/* $pkgdir/usr/lib/node-webkit/
msg2 "copy libudev.so.0.13.1 -> /usr/lib/node-webkit/lib/libudev.so.0"
cp $srcdir/usr/lib/libudev.so.0.13.1 $pkgdir/usr/lib/node-webkit/lib/libudev.so.0
echo "/usr/lib/${pkgname}/lib" > "$pkgdir/etc/ld.so.conf.d/${pkgname}.conf"
msg2 "symlink /usr/bin/nw -> /usr/lib/${pkgname}/nw"
ln -s "/usr/lib/${pkgname}/nw" "$pkgdir/usr/bin/nw"
msg2 "symlink /usr/bin/nwsnapshot -> /usr/lib/${pkgname}/nwsnapshot"
ln -s "/usr/lib/${pkgname}/nwsnapshot" "$pkgdir/usr/bin/nwsnapshot"
Last edited by blackcat (2013-06-21 22:10:55)

Do not use prebuilt binaries, but compile the package from source with the current libudev.
sha256sums=(SKIP)
source=("$pkgname::git+https://github.com/rogerwang/node-webkit.git#tag=nw-v$pkgver")
to build it in the PKGBUILD, use nw-gyp i guess.
Last edited by progandy (2013-06-21 22:54:36)

Easy solution for Q10 and POP email setup

I am posting a suggested solution to all of the POP email headaches for anyone running OS 10. I recently upgraded from a Torch 9810 to the Q10 and have had an awful time trying to intall and run my sympatico.ca email accoun in the new OS 10. I understand this is an POP email account.
I have stumbled upon this solution quite by accident - not one of the so-called tech experts at Bell or Rogers Wireless, despite countless hours spent on the telephone and in chats with them, were able to suggest this to me, which I found quite astounding!
All fo the tech experts kept telling me to install my sympatico.ca email account as a POP account - despite dozens of attempts, it would never work and sync properly!
The solution? Go into the advanced email setup options and choose Outlook as the account type, not POP, Exchange, or anything else. Enter your email address and account password and do not change any of the default settings that OS 10 will give you. Just finish the set up and, presto! You have access to all of your account folders and sycing seems to work magically.
I hope some of the tech experts at the Internet and wireless providers read this forum from time to time...it could save frustrated customers many hours!

It's possible that Sympatico has recently enabled Exchange Active Sync (EAS) access. If so, that is a great thing for all Sympatico users.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Need a solution for flash videos on my site...

Here is the deal. My website www.jonbarron.org has a few
flash videos on it (some of them as long as 30 minutes or so) and
while this website is not purely based on videos or media like that
I am noticing that the videos when you watch them can get very
choppy. I'm assuming this is because they need to be streaming or
something which would require use of a Flash Media Server hosting
soultion. EIther way I'm not sure if I should get a Flash Media
Server Web Host because like I said the video section of the site
is pretty small with only a few videos. I would however like some
input on what everyone thinks is my best solution to the choppy
videos on the website which can be found at...
http://www.jonbarron.org/video/video.php
Should I invest in a Flash Media Server Hosting plan (I don't
think I want to do this because for unlimted connections it's over
1500 each month!) or is there a way to make the videos less choppy
without downsizing them anymore then they already are? I'm a little
confused here when it comes to Flash Video on the web since I'm
rather new to this area...

They work fine for me, but I know what you mean. Don't invest
in a media server just yet...
Try increasing the buffer time on all of the movies. That
should fix any choppiness on the videos on computers that aren't
using a superfast connection.
Let me know if you need help adjusting the buffer. It's
pretty easy, just click on the FLVplayback component and open the
component inspector window. There is a spot for buffer size, make
it anywhere from 3-15-30 seconds, depending on how much you want to
buffer it.

Need a solution for multiple sites and multiple cameras

Hello,
I have a customer who has 3 different sites all in different locations. They are not connected through VPN however they do have a terminal server at the main location. They have 6 cameras total, 2 at each location. They are looking for a way to be able to connect all of these cameras to a centeral location (i.e. website, server, ect.) so that all 6 cameras can be viewed on the same screen by different users who would be given access. I am looking for the best solution working with a tight budget. Let me know your ideas and how you would implement it.
Thanks!

Ben,
Normally when you have multiple cameras you would log into the web interface and change the http port of at least one of them. The default port is 80. We normally would change one camera to use http port 1024 and the second 1025. Then you simply forward port 1024 to the first camera and 1025 to the second in the router. Just remember that when you attempt to access the cameras after you change the port it will look like this: :1024">http://:1024 (locally and remotely) Please reply if you have further questions.

Needs a solution for loading Crystal Report

Hi.....
I have already desiged & loaded crystal reports through SAP B1 Main Menu.
But I need help (Code in C#.Net) for loading a crystal report template(already created) for a System form (eg; A/R Invoice) immediately after the form load by a menu click(means through UI interface)
and report generated by identifying the Forms Document Number.

HI...
See this following link
https://www.sdn.sap.com/irj/sdn/businessone?rid=/webcontent/uuid/807d22cb-cb1d-2b10-8794-fb76d7feca88#section2
Regards
Billa 2007

I need a solution for the security questions please ?? In the other hand i can't use the rescue email !! I need help .

I need help for those security questions please !! I don't have a rescue email and even i don't know how to add it ! Please help me

I didn't mean to give me an answer for the security questions i mean that i didn't remember the answers and i don't have a rescue email to send in it , i'm just ask for sloution to reset my security questions got it?

I lost my Blackberry and I need a solution for preventing information from being seen.

HELP! I lost my business BB Curve 8320 the other day. It was supposedly found and the person was going to mail it to me, but I haven't heard from him in 2 days. Is there any way to prevent him from looking at business classified emails on my phone? I do not have a password on the phone and called T-Mobile (my carrier) who says I am out of luck. Can you delete an email address or anything? I really don't want my information in the wrong hands.
Thanks for any help anyone can provide!!

Hi
Sorry to hear your trouble. maybe its in the mail as we speak.
If you have a BIS account, you could log-in on PC and edit/delete it. If you run on BES, your admin will need to sort it.
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

I need a solution for a Muse/BC shortfall regarding phone pages with tag_pagecontent please

Hi, I wonder if you can help?
Our website is very content driven, with News/Jobs/Deals being uploaded throughout every working day, so I need to find a work around for the fact BC doesn't produce URLs/announcements with 'phone' in the URL like it does with the static pages, thus traffic browsing our mobile site ends up on the desktop version somewhat defeating the object.
Any help or suggestions much appreciated as how we can make the best of this situation?
Regards
Tom

Hi Tom
Have you tried enabling mobile support for BC generated urls ?
I would suggest you to get in touch with BC support and then will guide you with steps for how to achieve this.
Thanks,
Sanjit

Need alternative solution for SAP Note, kindly do needful

Dear Consultants,
Our client is not able to apply SAP NOTE (SAP NOTE :- 1850965) for the issue (http://scn.sap.com/thread/3517341)due to some technical problem, kindly suggest if any other way is there to solve this issue, please do needful.
Thanks & Regards,
Navesh

Dear Consultants,
Please do needful, I need your help.
Thanks & Regards,
Navesh

Need OWA solution for Q10

Similar Messages

Maybe you are looking for