Need OWB 11g tutorial and video classes

Hi Experts,
I am new to OWB and I need Need OWB 11g tutorials and video classes material.
Can any one please help me
Regards,
Phanikanth

Hi Phanikanth
There are some OBEs referenced here;
https://forums.oracle.com/forums/ann.jspa?annID=1667
Cheers
David

Similar Messages

I lost my iphone, i dont needed anyways, all i need is my contacts and videos and pics. i had icloud too.

i lost my iphone, i dont needed anyways, all i need is my contacts and videos and pics. i had icloud too.

Did you backup to iCloud before it was lost? The iPhone normally does it if you leave it charging with internet connection via wireless. Either ways go to iCloud.com and enter your Apple ID and password and check if your info is there.
Regards,

HT4061 My Ipad was part of my tuition. My school "IIN" loaded all my audio and video classes on it. I diseabled it by entering the wrong passcode it says connect to Itune. How do I make sure I do not lose my classe recording by doing so? please help. Than

Hello, I am and IIN Intitute of Integrative Nutrition in New York student. My iPAD 2 is part of my school material and was uploaded with all Videos and Audio classes for the whole program. I recently typed in my passwork incorrectly and disabled my iPad it is giving me the message " connect to i-tunes". I am afraid to loose my lectures. Could anyone help me with some information please? Thank you very much. Wouga22

If you do not have a backup you are going to lose everything on your iPad and even if you do have one, you may still be out of luck.
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
Read this very carefully before you proceed. Sometimes iTunes will allow you to restore the iPad without having to use recovery mode, but if you need to use recovery mode and don't have a backup, that is where you may have a problem.
http://support.apple.com/kb/ht1212
If you need recovery mode ....
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

Difference between OWB 11g OBE and OWB 10g: Implementation Part I?

I am planning to attend oracle OWB class Oracle Warehouse Builder 10g: Implementation Part I (Data Warehousing and Oracle Business Intelligence) through Oracle University http://education.oracle.com/pls/web_prod-plq-dad/show_desc.redirect?redir_type=13&group_id=1343&p_org_id=1001&lang=US&media=1&source_call=?
Has anyone already taken the class and tell the difference between the class and owb 11g oracle by examples in http://www.oracle.com/technology/obe/11gr1_owb/owb11g_update_extend_knowledge/less1_setting_up/less1_setting_up.html?
If there is not much difference, I woukd like to learn it by myself through Oracle OWB 11g OBE.
Thanks in advance. WS

If you seriously intend to take up OWB as your career path then i would advise you to go to Oracle unversity and attend classes , if you are going to use owb only for a project/small works then use Oracle by example.
Further to this if you company is sponsoring you then take oracle unversity course as "every little helps" and its never too bad to learn something the right way.
Its like making a choice whether to learnmusic form the web(online) or going to a music teacher and learning music. I would prefer the second approach.

I need "synchronize" my music and videos from my ipod to my new laptop

I buy a new computer but I don't have my music there. Can I copy all music and videos from my iPod to the new laptop?

The ipod is not a storage/backup device. It simply mirrors the selected content of the computer to which it is synced.
The sync is one way - computer to ipod. The exception is itunes purchases: File>Devices>Transfer Purchases
You should copy everything from the old computer or your backup copy of your old computer, to your new one.

Needing to present "photos" and "video" to large audience

I need an App to allow me to use a laptop and a remote mouse, and to make a formal presentation to a large audience. I need it to show both "photos" and a "video" in my presentation, allowing me to page through the photos one-at-a-time while I talk about them. How can I use Adobe "Photoshop Element" and "Premiere Element" to do this?

Answered in your other threads in the PSE & PRE fourms.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Need help understanding soundtracks and video

Hi,
I write music for myself (http://www.youtube.com/jgelhaar or http://www.myspace.com/bonjimmy) and I just saw the movie "The Holiday". In the movie Jack Blacks' character writes music for video. My question is what kind of software is handling this type of thing in the real world? Obviously I don't care so much about the PC side...
I have a contact that makes videos for YouTube and he's used my music on some of them (example is here: http://www.youtube.com/watch?v=9Zf3ET52BvA ) But in these cases, he just takes something that I've done and then puts it on his video as a sound track. I think it would be much better for me to write the music specifically for the video instead of the other way around. So I need to know what kind of software one would use for that purpose. With that, it would be nice to know what kind of a rig would need to be put together. Right now, I only have a couple of G4's at my disposal, but I am in the market for a new system once I can put the funds together. :/
Any help or comments would be greatly appreciated.
Jimmy

I figured the G4 wouldn't be able to hack it and I plan on getting a new system for this.
So when you're composing in Logic, is it a recording application that also shows the video or does Logic have to sync with something else for the video?
Now that you've assured me that Logic 8 is the right place for me, I will do more reading about it. Thanks a lot for your comments.

Need help syncing audio and video

Hello,
I am fairly new to this Mac and Final Cut Pro. Over the weekend, I recorded some video and audio separately and am now attempting to piece them together. I can get the two in sync for about a minute and after that they no longer line up. I was told the root of the problem was that the sound was recorded at 32 bits and needs to be 16 bits to sync up with the video in FCP, however, after I rendered the sound clip and checked up on its settings, I discovered that it was 16 bits. So now I am completely stumped. Any ideas?
Thank you.
Jamie

Seems like that person is a little lost on the subject.
Do this. Open FCP, go into Audio Video settings under the Final Cut Pro menu, then click on the Sequence Presets tab. (Forget about an Easy Setup, because you are not capturing. Easy setup is only if you want to match capture settings to sequence settings and playback settings. You are only concerned with sequence settings.)
In the Sequence settings tab, locate the Apple Pro Res 422 1920x1080 (or the corresponding aspect ratio for your footage), and press duplicate. Then, go into the duplicate setting and change the editing time base to 30 from 29.97, and change the timecode rate to Non-Drop frame. Label this something different so you know where to find it when you need it.
Now, when you start a project, go into the A/V Settings and choose this as the Sequence preset. Make sure you convert your footage with either Compressor or MPEG Streamclip to ProRes 422 before you edit. Do NOT use the native H.264 files that the camera creates.
The reason the blogger couldn't do it was because they were relying on Easy Setups. You can't set up a capture preset for 30 fps, because tape plays at 29.97. But you aren't capturing from a tape. You're just importing files.

Advice needed on importing photos and videos onto iPod.

Hi,
I am off travelling round the world for 6 months next year. I love taking a riducolous amount of pics and I was wondering what the best device to get them onto my ipod is. Also i want to be able to import videos as well. I have a sony T9 and the upgraded 5th gen iPod.
Thanks
Archie

Hi, I did some research and figured it out, and thought I'd post my results here in case it can help someone else someday.
There are two ways to get photos out of Picasa: Exporting and Backing Up.
If you export photos, they all show up flattened-out in one folder. While this would technically work, the downside is iPhoto will suddenly have thousands of photos added to it and I'm not really sure how it will figure out the events (I didn't try importing into iPhoto yet).
If you use Picasa's Backup feature (Tools->Back up pictures) then all the photos show up with their folder hierarchies preserved. So for example you could end up with a folder containing the following folders and photos.
Vacation Photos
Vacation Photos/Hawaii 2009/
Vacation Photos/Hawaii 2009/pic1.jpg
Vacation Photos/Hawaii 2009/pic2.jpg
Vacation Photos/New York 2008/
Vacation Photos/New York 2008/pic1.jpg
Vacation Photos/New York 2008/pic2.jpg
etc.
From what I've read, if the "Vacation Photos" folder is imported into iPhoto, the folder names will be used as events, so in this example you'll end up with a "Hawaii 2009" event and a "New York 2008" event, which is nice.
As far as Picasa's Backup tool goes, it will create one or more top-level folders with names starting with a dollar sign. These represent the top-level folders containing photos. On the computer I tested this on I ended up with $Desktop, $My Documents, and $My Pictures, because all the photos on this computer were inside of the Desktop, My Documents, and My Pictures folders (and their children).
So in a nutshell, if you want to migrate from Picasa on Windows to iPhoto, just use Picasa's "Back Up Pictures" menu item if you want to preserve the folder hierarchy of your photos. Oh, one last thing: this feature doesn't let you back up to the same hard drive as the photos, so just share a folder on either your Mac or your PC and then back up to that folder.
Hope somebody finds this information useful.

Can I un-do a restore - I really need the 77 pictures and video's bad - and I have not done a backup in 45 days

Help - I somehow did a restore on my iPhone and have lost all my pictures! Can this be undone??

No.
You can only try to restore from the latest backup that may contain the photos.
You should be importing pics taken with iphone regularly to your computer as you would with any digital camera.

How to stream audio and video captured from mic and webcam in sync.

I am working on a video chat project. I need to capture audio and video from mic and webcam and create rtp stream for them. How can I proceed for this. Any source code help will be highly appreciated. Otherwise just guide me how to do this and point to any good resource which is directly related to my need.
Thanx.

t.b.m
As mentioned by you, i am doing exactly like that . I have coded transmitter class. But at the receiver side it is unable to play the stream. I am posting my code . Can you please help with me with any mistake i m making in my code ?? Or with way I should receive stream at receiver side. Plz see my code. I am streaming to ip address 172.31.80.67.
package heyram;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.media.control.*;
import javax.media.protocol.*;
import javax.media.format.*;
import java.io.IOException;
import java.util.Vector;
import java.net.InetAddress;
import java.awt.*;
import java.io.*;
import java.net.InetAddress;
import javax.media.*;
import javax.media.protocol.*;
import javax.media.protocol.DataSource;
import javax.media.format.*;
import javax.media.control.TrackControl;
import javax.media.control.QualityControl;
import javax.media.rtp.*;
import javax.media.rtp.rtcp.*;
import com.sun.media.rtp.*;
import java.lang.Thread.*;
public class HEYRAM{
Format[] format=new Format[2];
Vector[] devices=new Vector[2];
CaptureDeviceInfo[] di=new CaptureDeviceInfo[2];
   SessionManager rtpsm = new com.sun.media.rtp.RTPSessionMgr();
Processor p=null;
Processor p1=null;
boolean result;
public HEYRAM(String address,int port,int ttl){
    try{
            InetAddress destaddr = InetAddress.getByName(address);
            SessionAddress sessaddr = new SessionAddress(destaddr,
                                                         port,
                                                         destaddr,
                                                         port + 1);
            String cname = rtpsm.generateCNAME();
                String username = null;
            try {
            username = System.getProperty("user.name");
        } catch (SecurityException e){
            username = "jmf-user";
        // create our local Session Address
        SessionAddress localaddr = new SessionAddress();
            SourceDescription[] userdesclist= new SourceDescription[]
                new SourceDescription(SourceDescription
                                      .SOURCE_DESC_EMAIL,
                                      "[email protected]",
                                                                 1,
                                      false),
                new SourceDescription(SourceDescription
                                      .SOURCE_DESC_CNAME,
                                      cname,
                                      1,
                                      false),
                new SourceDescription(SourceDescription
                                      .SOURCE_DESC_TOOL,
                                      "JMF RTP Player v2.0",
                                      1,
                                      false)
            rtpsm.initSession(localaddr,
                            userdesclist,
                            0.05,
                            0.25);
            rtpsm.startSession(sessaddr,ttl,null);
        } catch (Exception e) {
            System.err.println(e.getMessage());
            //return null;
    // rtpsm.initSession(localAddress, defaultUserDesc, rtcp_bw_fraction, rtcp_sender_bw_fraction);
        // rtpsm.startSession(...);
public void createVideoSession()
    format[1] = new VideoFormat(VideoFormat.YUV);
    devices[1]= CaptureDeviceManager.getDeviceList( format[1]);
     di[1]= null;
        if (devices[1].size() > 0) {
             di[1] = (CaptureDeviceInfo)devices[1].elementAt(0);
              System.out.println(di[1].toString());
        else {
            // exit if we could not find the relevant capture device.
         System.out.println("1234jjfjsajfjasf1");
            System.exit(-1);
        // Create a processor for this capture device & exit if we
        // cannot create it
        try {
            p1 = Manager.createProcessor(di[1].getLocator());
        } catch (IOException e) {
            System.out.println("1234jjfjsajfjasf2");
            System.exit(-1);
        } catch (NoProcessorException e) {
            System.out.println("1234jjfjsajfjasf3");
            System.exit(-1);
        // at this point, we have succesfully created the processor.
        // Realize it and block until it is configured.
       // p1.configure();
     result = waitForState(p1, Processor.Configured);
     if (result == false)
     System.out.println("Couldn't realize processor");
        p1.setContentDescriptor(new ContentDescriptor( ContentDescriptor.RAW_RTP));
        // block until it has been configured
        TrackControl track[] = p1.getTrackControls();
        boolean encodingOk = false;
        // Go through the tracks and try to program one of them to
        // output ULAW_RTP data.
        for (int i = 0; i < track.length; i++) {
            if (!encodingOk && track[i] instanceof FormatControl) {
                if (((FormatControl)track).
setFormat( new VideoFormat(VideoFormat.YUV)) == null) {
track[i].setEnabled(false);
else {
encodingOk = true;
else {
// we could not set this track to gsm, so disable it
track[i].setEnabled(false);
// Realize it and block until it is realized.
p1.realize();
result = waitForState(p1, Processor.Realized);
     if (result == false)
     System.out.println("Couldn't realize processor");
// block until realized.
// get the output datasource of the processor and exit
// if we fail
DataSource ds = null;
try {
ds = p1.getDataOutput();
} catch (NotRealizedError e){
//System.exit(-1);
System.out.println("1234jjfjsajfjasf4");
// Create a SessionManager and hand over the
// datasource for SendStream creation.
// The session manager then needs to be initialized and started:
// rtpsm.initSession(...);
// rtpsm.startSession(...);
try {
(rtpsm.createSendStream(ds, 0)).start();
} catch (IOException e){
System.out.println("1234jjfjsajfjasf6");
e.printStackTrace();
} catch( UnsupportedFormatException e) {
System.out.println("1234jjfjsajfjasf7");
e.printStackTrace();
public void createAudioSession(){
format[0] = new AudioFormat("linear",8000,8,1);
devices[0]= CaptureDeviceManager.getDeviceList( format[0]);

Has anyone tried installing the Google Voice and Video plugin?

Hi,
I wanted to check out the Hangouts feature at Google+, but I need the Google Voice and Video plugin for that. I tried unpacking the deb package supplied by Google and installing it manually, but the plugin does not work and Firefox just keeps crashing. Could anyone actually get it to work with Arch yet?

Sorry for not using the search, I see it's available in AUR... http://aur.archlinux.org/packages.php?ID=36308
Now trying to install from there!

How to synchronize audio and video rtp-streams

Hi everyone!
I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
In JMF API Guide I've read:
"2. Determine which Player object's time base is going to be used to drive
the other Player objects and set the time base for the synchronized
Player objects. Not all Player objects can assume a new time base.
For example, if one of the Player objects you want to synchronize has
a *push-data-source*, that Player object's time base must be used to
drive the other Player objects."
I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?
How are you supposed to sync audio and video if not with as above ?

camelstrike wrote:
Hi everyone!
I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
In JMF API Guide I've read:
"2. Determine which Player object's time base is going to be used to drive
the other Player objects and set the time base for the synchronized
Player objects. Not all Player objects can assume a new time base.
For example, if one of the Player objects you want to synchronize has
a *push-data-source*, that Player object's time base must be used to
drive the other Player objects."
I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?The RTP packets are timestamped when they leave, and they are played in order. You can't change the timebase on an RTP stream because, for all intensive purposes, it's "live" data. It plays at the speed the transmitting RTP server wants it to play, and it never gets behind because it drops out of order and old data packets.
If your RTP streams aren't synced correctly on the receiving end, it means they aren't being synced on the transmitting end...so you should look into the other side of the equation.

How to backup iPhone Music and Video to Your PC

As we all know that, it is impossible to backup iPhone movies and songs to PC in iTunes. So we need a third-party iPhone to PC transfer tool to backup iPhone contents to PC.
And sometimes you need to transfer music and videos on your pc to your iPhone, or your friends want to backup music from your iPhone to his iPhone, this time you need an iPhone Transfer to help you to solve these problem.
I would like to recommend the useful 4Videosoft iPhone Transfer for PC users.
Today I will show you how to transfer music, videos, photos and other files among iPhone and PC with 4Videosoft http://www.4videosoft.com/iphone-transfer.html iPhone Transfer .
4Videosoft iPhone Transfer is all-in-one iPhone software. It is a remarkable iPhone File Transfer to transfer iPhone files to PC, including the videos, audios files. Along with the function to transfer music and movies from PC to iPhone. Plus, it acts as one iPhone to iPhone transfer. So it’s very comfortable to copy one iPhone files to another iPhone. All the steps can be finished without any help of the iTunes.
The step-by-step guide on how to transfer music, videos, photos and other files among iPhone, PC with the help of 4Videosoft iPhone Transfer as follows:
This guide includes three parts:
How to transfer music/movie from PC to iPhone
How to backup iPhone music/movie to PC
How to export files from iPhone to iTunes
The first thing you need to do is to free download 4Videosoft http://www.4videosoft.com/download/iphone-transfer.exe iPhone Transfer , install and launch it. Also you should confirm your iTunes version is the newest version to satisfy your need. The interface will pop up like this:
http://www.4videosoft.com/guide/iphone-transfer/interface.jpg
How to import your computer files or folder to iPhone
1. Run 4Videosoft iPhone Transfer and connect the iPhone to PC via USB cable. The software will automatically detect the iPhone, display all the contents of iPhone in the left device list and show its device info on the right window.
http://www.4videosoft.com/guide/iphone-transfer/import-files.jpg
2. Click "PC to iPhone" button to import the files or folders on your pc you want to import to iPhone by checking them. It will start transferring automatically.
How to backup iPhone files to Computer directly.
1. Run the software, and connect iPhone to PC.
2. Select the files you want to copy to PC by checking them.
3. Click http://www.4videosoft.com/guide/iphone-transfer/iphone-to-pc.jpg button to start transferring.
4Videosoft http://www.4videosoft.com/iphone-to-computer-transfer.html iPhone to Computer Transfer has the same function as this. You can get a free trial and experience it.
How to transfer files between different iPhone.
1. Run the software, connect iPhone to PC.
2. Check the file(s) to be transferred in the file list.
3. Click the “iPhone to iPhone” button to start transferring from one iPhone to another.
http://www.4videosoft.com/guide/iphone-transfer/progress.jpg
For Mac users, we have the same function software to share with you.
4Videosoft http://www.4videosoft.com/iphone-to-mac-transfer.html iPhone to Mac Transfer
4Videosoft http://www.4videosoft.com/iphone-transfer-for-mac.html iPhone Transfer for Mac
4Videosoft http://www.4videosoft.com/iphone-ringtone-maker.html iPhone Ringtone Maker
4Videosoft http://www.4videosoft.com/ipod-video-converter.html Free iPod Video Converter

Your parents must be so very proud to have raised a spammer.:D
[Kamran Agayev A. |http://kamranagayev.wordpress.com] (OCP 9i/10g)
Author of "Oracle Backup & Recovery: Expert secrets for using RMAN and Data Pump"
http://www.rampant-books.com/book_1002_rman_backup_recovery.htm

How to synchronize audio track and video when transmitting by RTP

since the audio stream and video stream are transmitted separately on the network even if in a merged data, how to synchronize the audio stream and video stream at the receiving end ?

camelstrike wrote:
Hi everyone!
I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
In JMF API Guide I've read:
"2. Determine which Player object's time base is going to be used to drive
the other Player objects and set the time base for the synchronized
Player objects. Not all Player objects can assume a new time base.
For example, if one of the Player objects you want to synchronize has
a *push-data-source*, that Player object's time base must be used to
drive the other Player objects."
I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?The RTP packets are timestamped when they leave, and they are played in order. You can't change the timebase on an RTP stream because, for all intensive purposes, it's "live" data. It plays at the speed the transmitting RTP server wants it to play, and it never gets behind because it drops out of order and old data packets.
If your RTP streams aren't synced correctly on the receiving end, it means they aren't being synced on the transmitting end...so you should look into the other side of the equation.

Need OWB 11g tutorial and video classes

Similar Messages

Maybe you are looking for