Need package for Solaris 10 with extension .pkg after bunzip/tax -x

did steps to unzip firefox-30.0.en-US.solaris-10-fcs-i386.tar.bz2. the folder is not a package to Solaris, when trying to run
directly from folder get XPCOMGlueload error ( no libc.so.1). is there a package that unTars as a package ( -.pkg) and installs
with pkgadd ?

I am not an expert in this, but I did some research for Solaris builds and found some instructions that may help:
More information that may help:
*[https://developer.mozilla.org/en-US/docs/Solaris_10_Build_Prerequisites]
*[https://community.oracle.com/thread/2400868?tstart=0]
Builds only up to 31: [http://unixpackages.com/packages/mozilla]

Similar Messages

Mod_jk2 package for Solaris 10 x86

I need a mod_jk2 package for Solaris 10 x86 so it will be part of my installation, thus build is not good enough. Can anyone help?
Oren

Creator is now integrated into NetBeans. Download the Java + EE
distribution of the NetBeans 6.1 release from netbeans.org.
When you create a project, you will be led through a series of panels,
where the last is Frameworks. Select the "Visual Web JavaServer Faces"
framework. You will be familiar with the rest, and of course it will
work on solarisx86.
Have fun!
/krys

How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some

Hi
As my topic says
How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some custom presets?
Assume you have Flash Builder 4.5, CS Extension builder 2.0, Xcode 4.5.1 running under MacOS 10.8.

I understand why you need updated running headers in your book. To a sighted reader these serve as a guide to where you are and help you find things quickly. In addition, if you are exporting your data to XML or HTML from the tagged PDF it would also be important to have these in the proper location.
But for accessibility purposes, it doesn't have to be there because the screen reader reads everything in linear order, line by line. No one is looking at the page. A user listening to the screen reader read the page is going to hear this heading, just before the actual word itself. So they will hear the first word on the page twice. It's not the end of the world if it's there, but such headings are not necessary for accessibility unless they are not repetitive and contain information that is not otherwise available.
So I would say, fine if you need them or want them there, it's just one word.
I think you should try exporting your book to PDF (or even just a chapter of the book) and look at the tags panel in Acrobat to see if you are getting the result you want. I can't tell you exactly what you should do to get those results, you are using a plug-in I don't have.
I can tell you I didn't have to add the headers to any article at all, they just automatically export if the other articles in the file are added and you don't select the header style option "not for export as XML."
You may not experience the same results with your plug-in, but I think it will probably work the same way.
Give it a try and best of luck.

Best source of binary packages for Solaris 10

Which is the best source, Sun's companion CD, www.sunfreeware.com, www.opencsw.org, www.blastwave.org, or others?
Thanks,

Depends on your needs. Ie what criterion you use to decide "best".
blastwave and opencsw are more "modern" complete repositories.
They come with a "pkg-get" system for recursively fetching a package and all its depencies.
But they have a slightly higher startup cost as you have to install the pkg-get framework. Not that its hard.
You can't just download a package off the website and install it.
These days blastwave has made a cut with the past and only supports solaris 10/opensolaris.
opencsw is a fork that still supports solaris 8+.
the sun cd is a old snapshot of a small subset of whats on sunfreeware.
So if you just want one simple package. Grab it off sunfreeware.
If you want something more complex. eg a bunch of packages or a package with complex dependencies, its worth making the effort to get it off blastwave. Unless your running solaris 8/9. In which case use opencsw.

Business Package for Communication with NW04 and Exchange 2003?

Hi, we are evaluating opportunities to realize a groupware integration in the SAP Portal EP60SP2. A upgrade to Netweaver is planned, so the possible solution should work with Netweaver too. Our Exchange version is 2003.
I'm thinking about the standard SAP Groupware-Integration in combination with the Business Package for Communication.
Has anyone expirences with the Business Package for communication, Netweaver and Exchange 2003, yet?
I know, it's not officially supported, but maybe it works.
With the OWA-iViews we've got problems to implement our Styleguide and to devide into different iViews. The informations shown in the iViews of the Business Package are adequate and we would save ActiveX.
Is there another solution that works?
Are there other iViews from 3rd party developers, that show Outlook informations? Has anyone realized something like this in a project yet?
I would be grateful for any ideas.
Sandra

Hi Sandra,
Please note that the Business Package for Communication was only available for SAP EP 5.0. Newer releases of SAP EP contain the groupware (GW) functionalities and some GW iViews automatically as soon as KM is installed with the EP. The integration with MS Exchange 2003 should work. If you look for iViews such as Send EMail, Create Appointment, Show availability and Room Calendar, you can use the iViews shipped by SAP. If however you need the EMail inbox or the personal calendar and tasks, then the native OWA iViews are the way to go. For further details please refer to the SAP NetWeaver admin guide http://help.sap.com/saphelp_nw04/helpdata/en/0c/30d624a0fae949902f7a4b2a8f98bd/frameset.htm.
Hope that helps
Christian Stadler

Downloading Windows Update Packages for inclusion with System Image Manager

Is there a tool other than WSUS or SCCM that can download all Windows 8.1 updates for use with System Image Manager? I would like to deploy the updates along with the OS, custom drivers, and custom applications.
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

Hi Sean Liming ,
The main purpose is to download all the updates for specific system version image ,right ?
I haven`t heared about such an official released tool to do this .
As for the API ,I have found a tool based on this API developed by our MSDN guys to install the updates ,but I am afraid it doesn`t meet your need.
Searching, Downloading, and Installing Specific Updates
https://msdn.microsoft.com/en-us/library/windows/desktop/aa387101(v=vs.85).aspx
Get-WindowsUpdates.ps1
https://gallery.technet.microsoft.com/Get-WindowsUpdatesps1-7c82c1f4
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Cant install any extension for Dreamweaver with Extension Manager

I have installed dreamweaver cs6 but when i tried to install extension it says "This extension can not be installed, it requires Dreamweaver version 13 or greater.

You can only install extensions for DW CS5 with Extension Manager CS5. But this extension has declared it only supports CC or higher. So you can’t install it for DW CS5.

Downloads are Dead...Need 9i for Solaris

Download site is down. Is there a download-west or download-east that we can use? Please provide a mirror site, if available?

Enterprise/Standard Edition for Solaris SPARC:
- 7, 8 and 9 can be either 32-bit.
General Notes For Oracle Database On Solaris Operating Environment x86:
Terminal Release:
RDBMS 8.1.7 is the terminal release for this platform.

I need example for VARIABLES with Customer Exit.

hi every body i need example for Variable for Customer Exit.

Hi,
You can define 'Formula' variables in your customer exit..for example..
you need to calculate no of machine running hours per month, in order to
caculate the machine total utilization time..in this context.. you need to know
how may hours are there in an month by month..
you can define a variable and write the code in the customer exit for deriving the total no. of hours available for that month and get that value into a variable for further calution like deducting the down time and set up time so on..in your
calculated KF..
Hope this helps..
Assign points if useful..
Cheers,
Pattan.

Where could I download Adobe Acrobat 6.0 (we need to for compatibility with a 3rd-party custom software package)?

Please send me a pointer to a download site. Thanks in advance.

acrobat 7 is the oldest available unless you find something public on the adobe ftp server, ftp://ftp.adobe.com/pub/adobe/acrobat/

SUNWinst package for Solaris 8

Hi,
I am working on flar images and i have to get a flar image from existing solaris 8 system. But flar has not been included to the system installation when it installed. I have tired to install flar with pkgadd command from SUNWinst package which is under /var/sadm/pkg but this package doesn't contain any lib or binary like flarcreate. Then I searched SUNWinst on web but i couldn't find it. Another trouble, " I have no installation DVD for sol8". I am downloading sol8's iso now. But just in case, where can I get SUNWinst full package?
One more question:
Can solaris10.flar image be used on solaris 10 again? I mean, I have a flar image which contains sol10 OS and I wanted to use it as zone on other sol10 system. Can I do that?
*1st system*
uname -a
SunOS mach1 5.8 Generic_108528-03 sun4u sparc SUNW,Ultra-250
*2nd system*
uname -a
SunOS mach2 5.10 Generic_139555-08 sun4v sparc SUNW,T5440

Here is solaris8.flar download link :
https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_SMI-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=Sol8-cont-1.0.1-G-F@CDS-CDS_SMI
Hope someone knows the answer of my other question.
best regards
aykut

Pl/sql package for use with workflow will not return a value

hi all,
just trying to intercept a requisition being turned into an order if it uses a certain cost code. so i have amended the workflow and created a package to check what cost centre a requisition is using. how over the workflow stops on the function that calls the package witha a status of complete as if the package is not returning any values.
the package is as below:
CREATE OR REPLACE PACKAGE APPS.xxhccWFcapitalcheck AS
procedure XXHCC_CHECK_CAPITAL(itemtype in varchar2,
itemkey in varchar2,
actid in number,
funcmode in varchar2,
resultout out NOCOPY vARCHAR2);
END xxhccWFcapitalcheck;
CREATE OR REPLACE PACKAGE BODY APPS.xxhccWFcapitalcheck AS
procedure XXHCC_CHECK_CAPITAL(itemtype in varchar2,
itemkey in varchar2,
actid in number,
funcmode in varchar2,
resultout out NOCOPY varchar2 ) is
x_progress varchar2(100);
x_resultout varchar2(30);
l_doc_mgr_return_val VARCHAR2(1);
l_doc_string varchar2(200);
l_preparer_user_name varchar2(100);
doc_manager_exception exception;
p_test varchar2(100);
l_req_id varchar2(30);
CURSOR p_line_id IS
SELECT
codes.segment2 cost_center
FROM
po_requisition_headers_all headers,
po_requisition_lines_all lines,
po_req_distributions_all dist,
gl_code_combinations_v codes
WHERE
headers.requisition_header_id = lines.requisition_header_id
AND
lines.requisition_line_id = dist.requisition_line_id
AND
dist.code_combination_id = codes.code_combination_id
AND
headers.segment1 = l_req_id;
line_rec p_line_id%rowtype;
BEGIN
-- Do nothing in cancel or timeout mode
--if (funcmode <> wf_engine.eng_run) then
-- resultout := wf_engine.eng_null;
-- return;
-- end if;
l_req_id := wf_engine.GetItemAttrNumber (itemtype => itemtype,
itemkey => itemkey,
aname => 'DOCUMENT_NUMBER');
--FOR line_rec in p_line_id
---loop
open p_line_id;
fetch p_line_id into l_doc_string;
close p_line_id;
IF p_line_id= 'Q9DEF'
dbms_output.put_line p_line_id;
Then resultout := 'COMPLETE:F';
return;
p_test := 'USE DIFFERENT CODE';
ELSE
resultout := 'COMPLETE:T';
return;
END IF;
END LOOP;
end;
END xxhccWFcapitalcheck;
any help would be great!

Hi Community, first of all, english is not my native language and im not sure to use the correct terms for PowerCenter - so if im wrong please help me correct and make clear what we need. We have a kind of 3-steps ToDo. First step: Load data from an external source into a "local" datastore (its an oracle db on a server in our "hands")Second step: Check data against several verifications, this is done with a PL/SQL Package. The PL/SQL Package shall be called with an Interfacename who is set in the First PowerCenter Mapping. Our current thoghts are to do this via a stored procedure, which runs as "Target Post Load" and gets a variable "Interface Name".Is that possible? Im not quite sure about it. About the last part its even more unclear how we can solve it:Third part should be switch back to PowerCenter now - and the package (or to be correct a function in the package) should return a value for "okay everything fine => workflow continue" or "something happened => workflow is stopped" Im not sure how i can handle this. I hope my explanations are good enough so you can provide some help?!If there are any questions please ask! Thank you alot, best regards, Christian

Laptop for editing with Adobe Premiere & After Effects CS6

Hi, I'm just started a company working with young people, and I need a laptop for editing some videos (short films/music videos).
I was looking at a cheap laptop to be able to run Adobe Premiere and After Effects smoothly. I was told that this laptop would run smoothly:
http://www.pcworld.co.uk/gbuk/hp-envy-m6-1178sa-15-6-laptop-17419990-pdt.html
Can anyone confirm this? The graphics card is not listed on the Adobe's website but I was told it's compatible?
Im new to this stuff so please help, thank you.

How realistic are the system requirements Adobe posts on their site?
System requirements
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor with 64-bit support; Intel Core®2 Duo or AMD Phenom® II processor required for Adobe® Premiere® Pro, After Effects®, and Encore®; Intel Core i7 processor required for Adobe SpeedGrade™
Microsoft® Windows® 7 with Service Pack 1 (64 bit) and Windows® 8. Refer to the CS6 FAQ for more information about Windows 8 support.*
2GB of RAM (4GB recommended) for 32 bit; 4GB of RAM (8GB recommended) for 64 bit
14.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
Additional disk space required for disk cache, preview files, and other working files (10GB recommended)
1280x900 display with 16-bit color and 512MB of VRAM; 1680x1050 display required, and second professionally calibrated viewing display recommended for SpeedGrade
OpenGL 2.0–capable system
Sound card compatible with ASIO protocol or Microsoft WDM/MME
DVD-ROM drive compatible with dual-layer DVDs (DVD+-R burner for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
Java™ Runtime Environment 1.6 (included)
Eclipse™ 3.7 (for plug-in installation of Adobe Flash® Builder®); the following distributions are supported: Eclipse IDE for Java EE and Java Developers, Eclipse Classic, Eclipse for PHP Developers
QuickTime 7.6.6 software required for QuickTime features, multimedia, and HTML5 media playback
Dedicated GPU card required for SpeedGrade (for optimal performance in SpeedGrade and for GPU-accelerated features in Adobe Premiere Pro and After Effects: NVIDIA Quadro 4000, 5000, or 6000 or other Adobe-certified GPU card with at least 1GB of VRAM recommended); visit www.adobe.com/products/premiere/extend.html for supported cards
Optional: Tangent CP200 family or Tangent Wave control surface for SpeedGrade
Optional: For SDI output, NVIDIA Quadro SDI Output card required for SpeedGrade
Optional: 7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended) for video products
This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.† Phone activation is not available.
You have to be from another world to believe these requirements. Note the last optional statement. Up to and including CS4 this stated:
Dedicated 7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured) for video products.
Nobody in his right mind believes that system requirements get lower over time. It is purely a marketing lie to artificially lure prospective buyers.
The requirement to have two physical disks for CS6 is bogus.
If anything is bogus, it is the system requirements from Adobe and only fools would try to use a system with these minimum requirements, like this:
Pentium 4 with 4 GB of RAM, 24.5 GB of hard disk space is enough according to them.
Harm is confusing editing with getting high PPBM scores, I am afraid - again. Not all projects have 10 layers of H.264 stacked with heavy effects for two hours straight. The vast majority of editing is simple transitions and effects with 10 minutes of YouTube encoding twice a week.
Wrong assumption. I was thinking of a simple DV timeline with one single track. And however much you dislike the PPBM benchmark, it is the only available tool to show how well a system is setup and in balance. Question: Is your dislike of the benchmark based on the fact that your favorite HP Z820 does not do well?

Licensing and packaging for Netweaver with focus on CE.

Hello
As far as I know SAP always agree licensing with the SAP Customers itself. But is there a possibility to find out at least how they package Neatweaver. For example which standard package they have and what does it include.
Our Customer has the need to implement Application Integration and Workflows probably based on BPM which is part of the CE EHP1.
So they would need PI, BPM, some UI techs like webDynpros, VC and so one, Business Rule Engine, ESR.
Regards
Josef

Hello Josef!
To the best of my knowledge, NetWeaver consists of the PI and the CE. However, NW 7.1 has been never released officially as a bundle. Rather, PI and CE have been shipped separately. Version NW 7.2 should be shipped as a bundle again. This bundle should then provide all the technologies you listed.
Best regards
Alexander

Need Packages for Documentum

Hi all,
What are the jar files necessary for running applications using documentum. I have sample code written in JSP and when i run in my web browser i get the following error ..........
package com.documentum.fc.client does not exist
probably occurred due to an error in /dfcjsp/login/login.jsp line 4:
<%@ page import="com.documentum.fc.client.*" %>
HOW TO GET THESE PACKAGES ? ARE THEY AVAILABLE FREE?
could anyone please give me the links to download the packages or tell me where they exist in content server.......as i have content server installed.
Thanks
Krishna

Hi all,
What are the jar files necessary for running
r running applications using documentum. I have
sample code written in JSP and when i run in my web
browser i get the following error ..........Get them from the same place you got the sample code.
There is a good chance you already have them, if you downloaded or installed the samples from a bundle.
package com.documentum.fc.client does not exist
probably occurred due to an error in
/dfcjsp/login/login.jsp line 4:
<%@ page import="com.documentum.fc.client.*" %>The initial part of a properly named java package should reflect the web domain of the package's developer. So in this case try
documentum.com
HOW TO GET THESE PACKAGES ? ARE THEY
ES ? ARE THEY AVAILABLE FREE?No Idea if they are free, in either sense of the word, you will need to read the licence.

Need package for Solaris 10 with extension .pkg after bunzip/tax -x

Similar Messages

Maybe you are looking for