Need palm os rom images...urgent..

hi,
i need palm os rom images asap.. i have palm os emulator.. i went to palmos .com but it takes time for them to send.. they told me to register .. i registered one week back.. but no response from them.. if u have it pl mail me... u can send those for any palm os version.. preferably 3.x... i would b thankful to u if u send asap...
regards
Sato.

Hi,
Actually I'm facing the same problem as you are where I'ed install J2me WTK, Forte, J2sdk 1.3, Midp , POSE and the emulator from Palm. But according to www.palmos.com, they didnt provide the ROM graphic images and they asked me to register and wait for their approval.
The other way of getting the ROM Graphic images is to transfer the ROM from the PDA itself (if u have one) to your PC.....much better and faster.
The other solution is to use other type of emulator which is not PALM base.....check this webside for more information http://www.yospace.com or http://www.yozone.com.
If u find out where to get or download the ROM images, please inform me [email protected]
Regards,
Travis Loke

Similar Messages

Where can you download a new rom image?

I recently made the mistake of not bleeding the pressure out of a water line before beginning a home plumbing project, and subsequently ended up with a dead phone. I pulled the battery, and put the phone in kitty litter. Now, the phone is no longer dead, but I get a message:
Update ROM Image?
YES = <UP> button
NO = any other button
If I press UP, I get a message about the ROM on the SD card, if I press down, I get color bars on the screen.
I have tried the Verizon software upgrade (VerizonTreo700pSDUpdate-rev1.zip (unzipped on a new FAT format SD card)) upgrade on the SD card, but it doesn't recognize a rom image as being present. Where can I get the rom image that I need?
I do have insurance on the phone, so I can get it replaced (for $50 copay), but the kitty litter has worked on the phone before (when I left the phone on the seat of my garden tracter and it rained). It was swimming, then. This time it only was splashed thoroughly.
Thanks.
Post relates to: Treo 700p (Verizon)
This question was solved.
View Solution.

> 1. What happens if you press Down/No and then soft reset when you get the colored bars?
Absolutely nothing. The color bars just continue to be displayed.
> 2. Re-read the SD card setup directions to make sure that you are putting all of the upgrade files in the correct locations.
The directions were re-read, and no changes were necessary. I didn't unzip the update file on the hard drive and then copy the PALM directory to the SD card, because it was easier to just unzip it onto the SD card. I also tried it after moving the files from the PALM directory to the root directory, and it didn't do anything then, either. I get an error message telling me that the bios file is not present. I think that it's going to have to be sent in for repair.
Post relates to: Treo 700p (Verizon)

How do I create a ROM image for emulation?

Can someone tell me how to create a ROM image from my dying LC III so I can emulate it on my newer mac? I still have a lot of files and software I need to access in the future. OS 9 doesn't work with some of the software on my G4 PowerMac and I will be switching to an intel mac mini soon and will lose even that capability.

You can find instructions on this page and the pages linked from it:
http://www.emaculation.com/doku.php/sheepshavermac_os_xsetup
Regards.

Need to convert an image to .jpeg using Java !

Hello,
i am working in images now. i need to convert any image in the form of .jpeg using Java. in other words, i need to store an image in the form of .jpeg format. can any of u help me ! thanks in advance.
- Krishna

There's also jimi, at http://java.sun.com/products/jimi/
You can do something like:
image = new BufferedImage (width, height, BufferedImage.TYPE_INT_RGB);
// create your image
String path = "/path/image.jpg";
Jimi.putImage(image, path);
[\code]

Need to print in image with good quality in multiple pages

rinting of the image display area is to small to read on some large displays
Need to restrict the image resizing in generating the print output to a minimum size (to allow it to be readable) and allow the printed output to flow into a multiple pages wide by multiple pages in length if necessary. Currently it is restricted to one page.
below is the code
public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
if (pageIndex != 0)
return NO_SUCH_PAGE;
Graphics2D g2d = (Graphics2D) g;
Rectangle2D.Double printBounds = new Rectangle2D.Double(
pageFormat.getImageableX(),
pageFormat.getImageableY(),
pageFormat.getImageableWidth(),
pageFormat.getImageableHeight()
// Print the header and reduce the height for printing
float headerHeight = printHeader(printBounds, g2d);
printBounds.y += headerHeight;
printBounds.height -= headerHeight;
// Carve off the amount of space needed for the footer
printBounds.height -= getFooterHeight(g2d);
// Print the nodes and edges
printDisplay( printBounds, g2d, 0 );
if (footer != null) {
printBounds.y += (printBounds.height + 15);
printFooter(printBounds, g2d);
return PAGE_EXISTS;
=================================
protected void printDisplay( Rectangle2D.Double printBounds, Graphics2D g2d, double margin ) {
// Get a rectangle that represents the bounds of all of the DisplayEntities
Rectangle r = null;
for (Enumeration e=displayManager.getEntitySet().getEntityEnumerati on();e.hasMoreElements();) {
DisplayEntity de = (DisplayEntity)e.nextElement();
if (r == null)
r = de.getBounds();
else
r = r.union(de.getBounds());
// Get that as doubles, rather than ints, and expand by half the margin
// height in all directions
Rectangle2D.Double entityBounds = new Rectangle2D.Double(r.x,r.y,r.width,r.height);
entityBounds.x -= margin/2;
entityBounds.y -= margin/2;
entityBounds.width += margin;
entityBounds.height += margin;
// See if height and/or width was specified
Unit specifiedSize = configuration.getHeight();
double printHeight = (specifiedSize != null) ?
specifiedSize.getValueAsPixels((int)printBounds.he ight) :
printBounds.height;
specifiedSize = configuration.getWidth();
double printWidth = (specifiedSize != null) ?
specifiedSize.getValueAsPixels((int)printBounds.wi dth) :
printBounds.width;
// Figure out the ratio of print-bounds to the entities' bounds
double scaleX = 1;
double scaleY = 1;
// See if we need to scale
boolean canExpand = configuration.expandToFit();
boolean canShrink = configuration.shrinkToFit();
if (canExpand == false && canShrink == false) {
scaleX = scaleY = configuration.getScale();
else {
if ((canShrink && canExpand) ||
(canShrink &&
(entityBounds.width > printWidth ||
entityBounds.height > printHeight)) ||
(canExpand &&
(entityBounds.width < printWidth ||
entityBounds.height < printHeight))) {
scaleX = printWidth / entityBounds.width;
scaleY = printHeight / entityBounds.height;
if (configuration.maintainAspectRatio()) { // Scale the same
if (scaleX > scaleY)
scaleX = scaleY;
else
scaleY = scaleX;
above methods am using for printing image. but in large display i cant able to read letters.
Thanks in advance
Srini

Your renderer is wrong.... try this (untested):
   class myCellRenderer extends DefaultTableCellRenderer {
     public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int col) {
        if (value!=null) {
          ImageIcon icon = new ImageIcon(image);     // assuming image is defined elsewhere and is accessible
          setIcon(icon);
          setText(value.toString());
        } else {
          setIcon(null);
          setText("");
        return this;
   };o)
V.V.

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help?

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help? Is there some way to add the CMYK profile to the list of choices that are available in the export preset dialogue such that I can choose it?

leonieDF
Thanks for your response. My profiles are located within color sync utility as you can see here:
These profiles do not respond to clicking and dragging. Since they are all in one place, more or less, I'm reluctant to make further attempts to relocate them. Accessing the CMYK profile is the first difficult experience I've encountered with this arrangement. I have never needed the CMYK profile until recently, and that need has now past. However, it remains a mystery to me as to why it does not appear with all the others on the menu of export choices in Aperture 2, or on the menu of profile assignment choices in the Preview application (where again all the other profiles are listed as choices). I'm beginning to think my current set up will permit me to view an image that was created in CMYK space, but does not easily assign, or convert to that space. I don't face these restrictions with all the others, so it remains a curious circumstance for me. I anticipate upgrading my computer and software in the near future which might alleviate this issue altogether. Again, many thanks for your attention to this matter. The reach of this community is astounding.

Displaying Image on Image: Urgent

Hello All,
In my jsp page, I need to display an Image and on that image I need to display another image. How do I achieve this?
My requirement is there is a standard image. Depending on the language selected, I need to put another image on this in a corner of the parent image. Is this possible?
Pls let me know.
Thanks in advance,
Arun

You have to create a style sheet at the top of your page using z-index:
<style type="text/css" media="screen"></style>And then you create the corresponding divs.
<div id="layer1">your image
</div>
<div id="layer2">your other image
</div>

JAVA, sqlserver - Need to load an image from the sql server database

hi,
I need to load an image from the sql server database using java. I have connected to the database and getting all other records except the records for a photo (datatype = LONGVARBINARY) and Remarks (datatype = LONGVARCHAR).
I am using java and sql server db. The photo and remarks are stored in the db. and i need to show the image and the remarks fetching them from there.
I get the error :
Thread-9 org.hibernate.MappingException: No Dialect mapping for JDBC type: -1
How can I achieve this?
Thanks,
Gargi

Exactly. And are you using MySQL?
No. You are using Microsoft SQL server if I have to believe your initial post. A quick google tells me that the dialect class to use is:
org.hibernate.dialect.SQLServerDialect

Need some quick help - fairly urgent!

I've just taken over a new job and have been the task of finishing the new brochure for Christmas, there's not a lot to do but a lot of the measurements need changing
This is the layout I'm dealing with..
All the boxes have been made in Illustrator
The text has been done in In'Design and it seems every piece of text is it's own box if that makes sense
My question is, if I select the whole specification box - copy, paste it into Adobe Illustrator and change the text there, then paste the edited box back into In-Design, will I lose quality when it gets printed?
I'm worried if I do it this way it may come out blurred? Or am I just worrying about nothing?

I couldn't find an Illy file in the end and have ended up creating tables in ID to replicate what was already there!
Didn't take very long and I guess if I didn't do it now, I'd come across the same situation next time!
Date: Wed, 30 Nov 2011 08:48:07 -0700
From: [email protected]
To: [email protected]
Subject: Need some quick help - fairly urgent!
    Re: Need some quick help - fairly urgent!
    created by Peter Spier in InDesign - View the full discussion
There certainly are viable "quick fix" solutions proposed here, and if the dealine is looming and this file never needs to be touched again I might be tempted, but they are only postponing the pain for a file that needs periodic updates, and I wouldn't waste effort on them, myself, when that time can be put toward a proper rebuild now if that's the ultimate goal.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4054725#4054725
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4054725#4054725. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Need help deleting an image field/pictures in worksheet

I am in need of help!!! Added photos in an important .pdf document (a worksheet form that was pre-made) and I added image fields (Top box photo and small bottom box for text). I need to delete some image fields now and it won't let me. I upgraded my Adobe Reader to Acrobat XI Pro trial, still can't. If I try to edit image, it says I need to have Live Cycle designer to edit this form. Someone please help! This is my son's Eagle Scout worksheet and needs to be fixed tonight....please

If the file was created in LiveCycle Designer then it can only be edited
there.
It's not clear in what way you edited it originally.

In finder do I need to delete all images as I have over 10000

in finder do I need to delete all images as I have over 10000

Depends on the size of your hard drive.
Good practice indicates keeping at least 15% (or 5GB, whichever is larger) of the hard drive unused, to allow the OS to use it for swap files, virtual memory needs, etc. When your drive gets more full than that odd things can start happening - sluggish behavior, program crashes, etc.
If you are short of hard drive space, by all means dispose of as many files as you can which you don't need on that drive. Either archive them off and then trsh the originals; or just trash the ones you no longer need. Don't forget to empty the trash after dropping things into it - until the trash has been emptied, anything placed in it is not yet gone.
If you are not short of hard drive space, don't worry about it. Just becuase you have a lot of files means little - it is the effect of the space they occupy, not the quantity, that may be of concern.
I have over 50,000 image files on my Snow Leopard volume. They occupy about 29GB of drive space. Since that volume has about 500GB of capacity, the space those files consume is not of concern. There is no deleterious effect resulting from their presence on the drive.

Need Original BIOS Rom for Lenovo g565 (Mod.4385)

Messed my BIOS up, with a 560 BIOS (i know my own fault!) and need a original rom for recovery.
where to download?

the official download page doesn't have any bios update but i found one above. but, due to it's not official bios update, it may void the warraty and can brick the mainboard, use it on your own risk.
http://www.bios-mods.com/forum/Thread-Removed-Lenovo-G565-BIOS-Insyde-H2O-edit-Whitelist-or-remove-i...

Need to square various images - some tall, others wide - ideas?

I have several thousand images. They vary in size and some are tall and others wide.
I need to have all images square. Not wanting to lose resolution or have smaller images expanded and look bad.
How can I make all of my images square? Which if any of your programs would do that in a batch process?
examples:
An image 200 x 400 end up 400 x 400
an image 800 x 600 end up 800 x 800
and so on. Or if anything make them all 600 x 600 wand resize down large images or give white space around smaller images.
Which program if any will do this?
thanks,
Dave

Mass resizing tutorial
So you're wanting uniform size? You can use Image Processor script along with an action to make them all square in 1 simple click of the Run button (after you apply the right settings, of course.) Yes, all however many thousand images you have! We want to get this done in 1 swoop, which is possible, especially since all the images are ending up being the same size. I'm going to hold anyone's hand and do this step by step for anyone who has minimal to expert experience in photoshop. This explanation is very simple to follow.
1: Preparation to make them square
Heres the first step for the canvas size to be made uniform and square-y with a simple action. If you don't want square-y but still want uniform, skip this step. Let's say you want to make those thousands of pictures all 600 x 600 pixels. This is the preparation step. Make a new blank document 400 x 400 pixels. Make a new action, and name it Canvas Resize, and hit the record buton to start recording your actions. Change the canvas size to 600 x 600 pixels, and after you do that, stop the action recording. Close the document.
2: Organize so PhotoShop can process all your photos in 1 swoop
So we want to make everything 600 x 600. I'm using CS4, but CS3 and CS2 (and probably older versions of PS) all have a feature called Image Processor. This is the time to consolidate all the images you want to process into 1 main folder for an easy 1 click operation. Make two folders on your desktop and label one Pictures and the other Processed. You can either toss all your picture files which you want to process into the Pictures folder for a giant mess, or if you're organized, toss a bunch of organized folders into the Pictures folder, and you can keep your folder organization automatically. I'd recomming copying (NOT moving your pictures, COPYING) and organizing your pictures to be processed in the Pictures folder so that you don't potentially ruin your current organization of your photo archive. I've made my messes before moving files around and trying to figure out where I pulled them from.
3: Now that we're organized:
After you've consolidated your files, we will use photoshops Image Processor feature. First, click on File -> Go to Scripts -> Click Image Processor. A dialogue box will pop up with a bunch of options. Section 1 (section numbers are on the left) is "Select Images To Process." Click the Select Folder button and find the Pictures folder on the desktop with your images in it, and select the folder. Click OK. If your images are in multiple sub-folders inside the Pictures folder, and you want to process everything in each folder, check the Include Sub-Folders box so itll process everything inside. In section 2 of the Image Processor, "Select the Location to Save Processed Images," select where your batch of images is going to be saved. Select the Processed folder for this. If you have your photos organized in a sub-folder folder structure, and want to keep that organization, check the "Keep folder structure" box so it will structure your folders inside the Processed folder the same way it was structured inside the Pictures folder. Now for the file type. Choose whichever file type you want to save your photos as. Check "Resize to fit", and in the resolutions for width and height, put the same number in both. This will NOT stretch the images, but it will take whichever dimension is larger and scale it your specified number, and keep the aspect ratio the same! For example, say you have an 1800 x 1200 image, which is a 3:2 aspect ratio. If you type 1200 x 1200 in the dimensions, wether vertical or horizontal, it will resize the long dimension of the image to 1200, and the shorter to 800 and keep the 3:2 ratio. Cool, huh? This makes it painfully easy to do thousands of pictures overnight if you want them the same maximum dimension wether vertical or horizontal.
Now for the magic:
In section 4, "Preferences" in the Image Processor, you can have PS apply actions to pictures after they've been resized. Ain't that fancy? Check the Run Action box, and select the Canvas Resize action we created earlier. Since we created an action that changes the canvas size to 600 x 600 pixels, the action of making it square will be done all in 1 shot! Any picture 600 x ? will be made into 600 x 600 with whatever color you chose your background to be in recording your action. Now, click the Run button, and your computer will angrily churn all your images into perfect 600 x 600 pixel squares. All numbers I used were for expample only. Pick whatever number you want. If you want 3000 x 3000 squares, punch in 3000 x 3000, make the canvas resize action for it, and go for it!
Anyone who reads this and tries it, let me know how easy or difficult it was to use this tutorial for you. This method is how I organize the CDs or DVDs which I submit to register my photos to the US Copyright office. I generally make a batch of 800PX JPEGs, images out of all the photos I selected to copyright, burn em, and I'm done within the hour. For my first copyright CD, I made a copyright CD for registration in less than an hour for 4 years of my photographic work.
And P.S.: Upsizing always dulls or pixelates a photo unless you're going to take the time and enlarge each one with enlarging software, and that's a whole new batch of processing in its own. And.. yes, I wrote this whole tutorial just for this post, lol. I enjoy teaching technical knowledge. Hope this helps and whoever reads this enjoys it!
-Bruce P.
-overfocused.com-

Do I need to reduce the images size in pixels before upload them to M.Me?

Do I need to reduce the images size in pixels (actual size jpeg 5616 × 3744 pixels/766kb) before upload them from iPhoto to a Mobile Me Gallery?
Otherwise they will be heavy or the upload process take care of that?
It would be nice that iPhoto took care and optimize the images to display online without any more work, because I´ve 1200 images to upload and they´re jpegs 5616 × 3744 pixels. It´s just to viewing purposes. Not o download or print.
Thanks.

In fact no matter if I use a High or Medium compression size JPEG, the size after upload is the same.
Starts with 1,5 MB/5600px (high) or 780kb/5600px (medium) JPEG and ends after upload in 115kb for a 1024px image.
This means that iPhoto auto compress in order to publish to Mobile Me, even if we start with a bigger file.
I hope this info is useful to others.
Thanks.

HT201210 i need to update to the latest version of itunes, but need to download some images and video first.....it is telling me that this will all be erased if i update, but it is not letting me do anything else.....what can i do??

i need to update to the latest version of itunes, but need to download some images and video first.....it is telling me that this will all be erased if i update, but it is not letting me do anything else.....what can i do??

You have no choice but to restore the phone.
However, I'm sure you've been smart enough to have backed up your data before starting the most significant update in iOS history,right?

Need palm os rom images...urgent..

Similar Messages

Maybe you are looking for