Need password error code 03305

Need pass code for mw hp dv2000 error code 03305
This question was solved.
View Solution.

Hi,
No, one OR the other, not all of them
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Hp compaq MINI password error code CNU9353S33

I am receiving a request for "CURRENT PASSWORD" on my HP MINI 110, which I have not previously set.
After 3 attempts I get "System Halted, Fatal Error " and error Code CNU9353S33
How can I recover my system. Please help
This question was solved.
View Solution.

Hi
Try>> e9lofqfnff
Third character is small case L
Regards,
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

HP 15g000 (15gt) laptop administrator/power on password needed. Error code after 3 tries= 88816924

Hi: My friend bought a laptop and after a couple of months it immediately asks for the Administrator password or Power On password. They bought it from "fingerhut" who says they will do nothing. They have not even completed paying for it yet.I have removed all batteries, even the one supplying the CMOS. It then says it will reset the CMOS to default, but it then still is asking for the password. Is there a password or utility to fix this? thanks.

Hi: Please read this post which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/System-Hal... Then... You can: 1. Use the unlock code you generated to enter the BIOS
2. Disable all passwords that are enabled in the BIOS's security menu.
3. If asked for current password - type the unlock code
4. For new password, just press ENTER key
5. Repeat the same for verify password column.

Need Help - Error Code : 0x800F0922 I cannot Activate my IIS InetPub

Hi All Windows Expert;
Need your kind help.
When I activate my webservice IIS, it prompt me an error 0x800F0922 and the Installation of the InetPub will not continue.Hoping for your kind help because I need to run my IIS webservice.
I tried whatever on the internet already but still no result

Hi,
Try tcode RSKC perform the tests for the characteristics mentioned by you. Execute and correct errors if any and then try loading data.
you can also go for error handling option in infopackage that the load should not fail if x number of errors should only fail when the records exceeds the number x.
Thus it will ignore the number of records you give in error handling
Thanks
Puneet
Edited by: Puneet Chawla on Jan 17, 2008 9:18 AM

Need help - Error Code "2SVM/1/2: CPU BO VOLTS"

Hello,
My older PowerMac G5 Quad (Late 2005 model) has issue - CPU funs are spinning very fast.
Checked with Hradware Test.
It saysError Code: 2SVM/1/2: CPU BO VOLTS
Also LED #2 and #7 are RED.
Please help to identify the problem.
Thank you,
Taras Pelekh

Tarasik,
The most helpful information in those posts is staring you in the face in the very first link: it's quite possible—even probable—that you are running the wrong version of AHT (Apple Hardware Test).
Are you 100% certain you're using the version of AHT that came with your particular machine? AHT is highly machine-specific and you cannot use a version that came with the install media for another Mac.
I also suspect that another, very important clue is contained in the last version of BDAqua's first post.

I get nothing but error messages, -"Your IMAP server wants to alert you to the following: 113 that mail is not available" or 364? there are hundreds stacked up.You must give answers to how to fix these when we do "search" add the error code number

I get nothing but error messages, -
"Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364?
Now there are hundreds stacked up on my desktop.
I cannot find the answer anywhere. You need to give answers to how to fix these errors because when I "search" "error code" or the number there is NOTHING. NOTHING! Yet you give us these stupid error codes
then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft. How in the world can you give us ERROR codes without the explanation of what
to do or how to fix it. You need to add each error code number in your "search" then explain what it is and how to fix it. I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELP

Hi,
I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
If you find any unusual emails that cannot be read or sent, try deleting them to try again.
I also suggest you create a new profile to setup the IMAP account:
http://support.microsoft.com/kb/829918/en-us
Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
For the steps to setup an account in Outlook 2010, please refer to:
http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
I hope this helps.
Regards,
Melon Chen
TechNet Community Support

Direct Entitlement API - passing error code

Hi,
I'm trying to implement login API in our DPS application. I can see that there is a possibility to provide an errorCode in the SignInWithCredentials action.
Error Results:
HTTP 401 Unauthorized
Body:
<result httpResponseCode=”401” errorCode=””/>
How can I read this error code on the app side (in login action from adobeDPS.authenticationService.login(username.val(), password.val()); ) ?
Will it be available in the error field of this transaction ?
Or I should retrieve it some other way ?
I need this error code to show revelant message to the user that din't succeed to log in.
regards,
Piotr

But I get -150 (TransactionAuthenticationUnrecognizedCredentialsError) no matter what errorCode i set in the XML response.
And I'd like to get the error code which I've set on the server.
Can I pass a custom code there somehow ?
Or I need to set the error code to one of the values from that list ?
Adobe DPS - Library and Store SDK 2.32 : adobeDPS-TransactionErrorType : JsDoc Reference

Hp mini 110-1140 Fatal Error... System Halted. CNU94542R9 Need password to log on!

HP MINI FATAL ERROR SYSTEM HALTED .CNU94542R9 . Need password to log on!
Please Anybody SOLVE THAT PROBLEM. I HAV NOT OPEN MY PC SINCE one year, plz help me if you can?.
This question was solved.
View Solution.

Hi,
Good to hear it's Ok
You can remove the need for a power on password as follows - use the code from my previous post where necessary.
Shut down the notebook. Tap away at the esc key as soon as you press the power button to access the Start-up menu and then select f10 to enter the Bios menu. Use the arrow keys to highlight the Security tab and hit enter. Use the arrow keys again to highlight power on password and hit enter. Enter the current password ( use the code in my previous post ) and then for the new password, just leave this blank and hit enter - do the same for the confirmation field. Press f10, select to save the new settings and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

When trying to reset airport express password, I've got an error code -16.

A friend of mine gives me an AirPort Express which I intend to use at home to connect it to an audio device in my living-room. I’ve already have a wireless network based on a Linksys router, so the idea is to extend my actual network.
As the Airport was used, it has already a password, which my friend does not remember.
After reading the user manual, I’ve achieve to get into the configuration window, after I’ve made all the modifications (including the device password), but when saving I’ve get an error code -16.
Any help or advice?
PS: BTW, sorry for my English, it still needs improvement ;-)

First you cannot extend your linksys network with the apple expess. at least not in the typical definition of extending a network. you should first do a factory reset of the express to wipe out all prior settings.
you do this by unplugging the unit and holding down the reset button while you plug it back in. wait 10 to 15 seconds before releasing the reset button.
you'll then want to configure the airport express

Need bios reset for hp dv 40000 I hit 3 time error code is09924

I need to reset Bios password for hp dv4000 I hit it 3 time error code 09924

Hi,
Try entering:     pjfgn
                                  or
                               wpkkxh
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience. Error Code: c0000005 Address: 76f73ac3 I clicked on the OK button and the downloader closed. I then tried to download from the organizer. I

Photoshop Elements 12
Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Code: c0000005
Address: 75e32f71
I clicked on the OK button and the downloader closed.
I did a search on this error code (c0000005) and there seems to be a workaround but no solutions, why is this? I ask that because this problem seems to be years and years old, going back to at least 2005 (do the math that is 10 years).
I don't even have the Camera hooked up and I get this error on download. I redownloaded everything and reinstalled. I allso saw the AVI issues reported with this proble so i updated Quicktime though without the camera being hooked up when I get this error I didn't expect that to work. I tried support and they wouldn't help because I bought it in March this year. Pretty frustrating as I have re-purchased Elements about every 2 years. I think I might need a new CODEC? I had this problem on an Earlier version And I seem to remember that being the Fix but this may be something completely different

I finally found that it was missing a picture so the Catalog was "corrupted". I just deleted the picture and it started working.
I hate Adobe and their total lack of support - thanks for nothing Adobe . Also get this - they offered me to upgrade to 13.0 ( My 12.0 is only 6 months old but they still don't support it on errors. Only install errors!
I have upgrade and repurchase this product 4 times now. I will find something else next time!

Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen

It says it needs to be connected to itunes and restored. when i do that, it goes through the whole process then comes up with "iphone could not be restored. unknown error code (-1)". Please help

My brother gave me his old iphone when the touch screen went out on mine. It's in great shape but when I received it, it says that it needs to be connected to itunes to be restored. I have done this and it goes through the whole process then says iphone "iphone" could not be restored. unknown error code (-1). There is not a -1 code on the list and I have tried most of the suggestions.
Does my sim card need to be in when I am doing this? And any other suggestions?

I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.

I have error code 261 I ran a test and here are my results. Need help

Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Compaq Presario 06 P8654B-ABA 6000T NA910
iTunes 7.3.0.54
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), Pfc (2.5.0.201),
UpperFilters: GEARAspiWDM (2.0.6.1), incdrm (4.3.23.0), InCDPass (4.3.23.0),
Current user is an administrator.
Video Display Information:
Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
Connected Device Information:
Disk drive, WDC WD1200BB-00CAA1, Bus Type ATA, Bus Address [0,0]
Disk drive, WD 1600BB External USB Device, Bus Type USB
CD-ROM Drive, HL-DT-ST DVD-ROM GDR8161B, Bus Type ATA, Bus Address [1,0]
CD-ROM Drive, HP DVD Writer 200j, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: HP DVD Writer 200j, Rev 1.36
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 2 4 8 12.
The drive CDRW speeds are: 2 4 8 12 0.
The drive DVDR speeds are: 2.
The drive DVDRW speeds are: 2.
F: HL-DT-ST DVD-ROM GDR8161B, Rev 0042
Drive is empty.
The last failed MP3 CD burn had error code 261(0x00000105). It happened on drive E: HP DVD Writer 200j on CDR media at speed 0X.

Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Compaq Presario 06 P8654B-ABA 6000T NA910
iTunes 7.3.0.54
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), Pfc (2.5.0.201),
UpperFilters: GEARAspiWDM (2.0.6.1), incdrm (4.3.23.0), InCDPass (4.3.23.0),
Current user is an administrator.
Video Display Information:
Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
Connected Device Information:
Disk drive, WDC WD1200BB-00CAA1, Bus Type ATA, Bus Address [0,0]
Disk drive, WD 1600BB External USB Device, Bus Type USB
CD-ROM Drive, HL-DT-ST DVD-ROM GDR8161B, Bus Type ATA, Bus Address [1,0]
CD-ROM Drive, HP DVD Writer 200j, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: HP DVD Writer 200j, Rev 1.36
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 2 4 8 12.
The drive CDRW speeds are: 2 4 8 12 0.
The drive DVDR speeds are: 2.
The drive DVDRW speeds are: 2.
F: HL-DT-ST DVD-ROM GDR8161B, Rev 0042
Drive is empty.
The last failed MP3 CD burn had error code 261(0x00000105). It happened on drive E: HP DVD Writer 200j on CDR media at speed 0X.

Windows phone error code 80188301,. please need help

i am getting an error while updating my windows phone. windows phone error code 80188301,.
please need help

Hi,
If issue persists after using the solutions provided by Aman Raizada, then I would suggest you ask the question in Windows Phone support forum:
http://www.windowsphone.com/en-US/how-to/wp-support
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Need password error code 03305

Similar Messages

Maybe you are looking for