Need password reset for HP LaserJet M1536dnf MFP the same as others on this forum.

I have the same M1536dnf password problem here, I can't access the settings.
I can't activate the duplex mode without it.
Thanks

Hi @HPFix7,
I see that you need the reset for the printer. I can help you.
I can send you that information in a private message.
In the forum beside your handle name just click on the envelope to view it.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

  • Need password reset for hp mini 1101

    need password reset for hp mini 1101cnu932bkxrplease help

    Hi: Please read this post which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Sy​​​​​​​​​​​​​​​​​​​​​stems-and-Software/System-Halt​... Then... You can: 1. Use the unlock code you generated to enter the BIOS
    2. Disable all passwords that are enabled in the BIOS's security menu.
    3. If asked for current password - type the unlock code
    4. For new password, just press ENTER key
    5. Repeat the same for verify password column.

  • Password requiere on HP LaserJet M1536dnf MFP

    Hello 
    My name is Ciprian and i am from romania.
    I have a  HP LaserJet M1536dnf MFP and i want to make a change to the next settings:
    Device Configuration  
                                               Copy
    Optimize: Picture Light/Dark: <-----*-----> Paper Size: A4 Paper Type: Plain Collation: On # of Copies: 1 Reduce/Enlarge: Original=100% Draft Mode: Off Two-Sided: 1 to 1 Sided Multi-Page Copy: Off
           Whent i change in Optimize setiing fron Picture in TEXT I whant to save its requaiere a passord .
    What is the deffault passorwd to save the setting i make 
    10x 

    Hi,
    You will need to do a reset to remove the password.
    Check your inbox on how to perform a reset.
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • Password reset for HP LaserJet 1536dnf

    Please help reset the printer password for HP LaserJet 1536dnf.

    Hey @Carlota, 
    Welcome to the HP Support Forum. I hope you enjoy your experience here.  
    I understand you're looking to reset the password for your HP LaserJet Pro M1536dnf Multifunction Printer.  I would like to assist you with this.  I have some reset combinations that may help. 
    I will private message you the steps for Restoring Defaults and NVRAM Initialization on your printer.  
    Please let me know the result of your troubleshooting by responding to this post.  If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below.  
    Thank you for posting in the HP Support Forum and have a great weekend!  
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Password Reset in HP Laserjet 1536dnf MFP - Forgot the password

    It's shows Secure mode. Iam unable to Assign IP Address. It's asking for Password i have forgot the password.
    I have tried all the steps which has given in forum, but i could not reset the password.
    Please help out i should configure in Network it's urgent

    I'm having the same issue. One of the students at work thought it would be funny to lock me out and I can't get into the setup.

  • Password reset for Officejet Pro X576dw MFP Printer

    Help.  We have an Officejet Pro X576dw MFP and the manager who set up the system has lost the password that he input when he set the printer up.  We can't access the utility part of the program and set up out incoming fax's and scans to go straight to the computer.  I have been into the Setup menu and the Factory default setting is also locked and requires the password, is there any other way that we can reset this password??

    I've found a work around.  Open System Prefs/Printers & Scanners. Click on HP Officejet Pro X576dw MFP in the left hand pane, then Scan at the top of the box on the right.  Load your document into the scanner and click Open Scanner. Now, make sure the "Use Document Feeder" box in new Scanner window is checked and click Scan in the bottom right of the window. If thta box isn't checked nothing will happen.
    You'll find the scan titled "Scan" in the Pictures folder.

  • Password cache - for user identity that share the same application server

    I have different user identity that share the same application server passwords.
    When I create a password cache entry for an an application server I have to be specified the User identity for the application server. Is there a way to indicate multiple User identity in order to avoid to create different entry (one for each user identity)?

    No. An SGD user can only have a single username for an application server.
    There may be a way to craft a solution:
    - create several ENS application server objects pointing to the same real application server
    - cache different usernames against each ENS application server
    - create multiple, identical application objects, assigning a different application server to each, OR
    - create a single application object and assign all the ENS servers to it, along with the "SGD Broker" for dynamic launch.

  • Password Reset in HP Laserjet 1536dnf MFP

    Hi ,
    Im haveing issue with accessing printer its always promt me enter password..is there any way to fix it

    Hi,
    You will have to do a reset on the printer, please check your inbox i have sent you the steps on how to do it.
    Hope this helps.
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • HP LaserJet M1536dnf MFP doesn't automatically answer faxes

    My new HP LaserJet M1536dnf MFP does not automatically answer fax calls.  I do not have a phone hooked up or an answering machine/voicemail.  The 'Answer Mode' is 'Automatic'.
    We use an analog converter to connect it to our internal digital VOIP phone system.  The prior MFP that was connected didn't have any issues with answering/printing faxes.
    I can see "Incoming call" on the display but it just rings and rings.  If you press the 'Start Fax' button when it's ringing, then it will proceed with connecting and receive the fax, otherwise it eventually drops the call.  This is not good seeing that a lot of faxes come in when the office is closed or otherwise unattended.
    I tried the "Fax/Tel" setting, but that didn't work either.
    Please help!
    Thanks, much!!!
    This question was solved.
    View Solution.

    Hi @DW-OH, 
    I see by your post that the faxes won't come through when set to automatic or Fax/Tel, but you can manually receive the fax. I can help you with this.
    Update the printer's firmware.
    HP LaserJet Pro M1536dnf Multifunction Printer Drivers.
    Select your operating system, click next, click the link for firmware.
    Please check your private messages for the reset for the printer, I have seen this resolve this issue previously.
    In the forum beside your handle name just click on the envelope to view it.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Scanning issue with HP LaserJet M1536dnf MFP

    I am getting the error messages in my windows 8 machines "The scanner is currently in use. Please wait until your previous task is completed and then try scanning again." I have a HP LaserJet M1536dnf MFP printer which is connected to the network and users connected to the network through wifi. I have installed the latest driver versions from hp.com. It will work for some time but again will face the same issue. In Windows 7 machines, there are no issues.If anybody is having solution to this problem please share.Thank you.

    Welcome to the HP Forums  fastndfury,
    I see by your post that you are only getting the error on the Windows 8 computer, "The scanner is currently in use. Please wait until your previous task is completed and then try scanning again." I can help you with this issue.
    I have provided a document to go through the steps to see if it will help resolve this issue.
    'Another program has control of the scanner' Message Displays on the Computer When Scanning.
    If you need further assistance, let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hp laserjet m1536dnf mfp

    My m1536dnf mfp was sending & receiving faxes until this morning. I now have 14 faxes "Pending".
    Can't get anything to transmit.

    Hey @dcraigen,
    I would like to assist you in resolving your fax issue of not being able to send or receive faxes on your HP Laserjet Pro M1536dnf Multifunction printer. The first thing we really need to do is get rid of the pending faxes. Unfortunately you will need to send these after we get the printer up and running again.
    Delete Stored Faxes:
    Touch the Setup button on the Control Panel for your printer
    Right arrow to 'Service' and select OK
    Select OK on Fax Service
    Select OK on Clear Saved Faxes
    Next open your Setup menu again and right arrow to Fax Setup and select OK
    Right arrow to Advanced Setup and select OK
    Right arrow to Redial if Busy - disable this and OK
    Right arrow to Redial -no answer- disable this and OK
    Right arrow to Redial Comm - disable this and OK
    Once the Fax is cleared of the 14 pending faxes then we can work to resolve this issue.
    In order for me to provide you with accurate support I do have a few questions for you:
     Are you using a Dedicated Fax Line just for the fax machine or is the phone line shared with your telephone?
    Does your Fax Phone Cable go from the rear of the printer directly into the wall jack or is there a modem or splitter in between?
    Is there an Answering Machine or Voice Mail on the phone line?
    Who is your Telephone Provider?
    Do you know if your phone line is DSL?
    In the meantime, I'm going to refer you to an HP support document for fax issues. Please run through these step-by-step instructions:
    Cannot Send or Receive Faxes
    Please let me know if any of these steps resolve your issue. Should you still be experiencing issues be sure to respond to this post with the answers to my questions above.
    Thanks for contacting the HP Support Forums. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • HP laserjet m1536dnf mfp print and scan is very slow

    Hi Sir/Madam,
    HP laserjet m1536dnf mfp print and scan is printing and scanning slow on network. Sometimes scan is not work. That's why I have to reinstall the printer driver. So how to increase print speed?
    Thanks in advance,

    Hi riz1_4444,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand the printer is printing and scanning slow on the network.
    I will be happy to help you.
    Make sure printer is connected directly to a wall outlet.
    Try printing a hardware test on the printer to see if it prints slow or not.
    Printing a Configuration Report. Select Method one: Print a Configuration Report from the printer control panel.
    I would restart the router to see if this will resolve the issue.
    Try another Ethernet cable.
    If you are still having issue then test the printer by connecting the printer to the computer by a USB cable to see if it is something on the network that is causing it to slow down.
    Hope this resolves your issue for printing slow over the network.
    Thank you for posting on the HP Forums.
    Have a wonderful day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Laserjet M1536dnf MFP jam in catridge area

    hp laserjet m1536dnf MFP all in one printer showing jam in catridge area, have check printer sensers they are ok and threre is no jammed paper. have even tried another power board but to no aview.help

    Hi @sytech,
    Welcome to the HP Forums!
    I understand that your HP Laserjet m1536dnf MFP all in one printer is showing a jam in cartridge area. I am happy to help!
    Please take a look through this guide, 'Doc. feeder jam', 'Open door and clear jam', or Other Jam Message Displays on the Printer.
    If that does not resolve your issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
    Hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Unable to use scan with networked HP LaserJet M1536dnf MFP using Mac OSX, but able to print.

    Thanks for any help. 
    I'm using an HP LaserJet M1536dnf MFP.
    It is networked wirelessly via an Apple Extreme and prints just fine over the network but will not scan. 
    Yet, it scans just fine when I move the printer's USB cable from the Extreme directly to the MacBook Pro (a bit of a hassel).
    When I try to scan over the wireless network, I'm able to go through the scan driver interface and see the printer, but when I click on "Scan", I recieve this error message:
    "Scanner communication cannot be established."
    "HP LaserJet M1536dnf MFP is currently unavailabe.  Ensure cables are connected.. etc."
    I'm running OSX 10.8.3 on an old MacBook Pro (2008)
    MacBookPro3,1
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    2.4 GHz
      Number of Processors:    1
      Total Number of Cores:    2
      L2 Cache:    4 MB
      Memory:    4 GB
      Bus Speed:    800 MHz

    Hello, DP Photo, sounds like a scanning issue with the software. To start I want you to completely remove the software and then reinstall the programming from the packages available on the website I am going to link you to below. Use the full-feature software if available. 
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3974279
    Try that and let me know how it goes! 
    -Spencer 
    PS I hope you are having a wonderful day! 

  • Cannot Scan - HP Laserjet M1536dnf MFP - Mac OSX 10.9.4

    Purchased a HP Laserjet M1536dnf MFP four days ago for use with an Apple MacBook Pro using OSX 10.9.4. I got it to print and copy, but keep getting the folllowing error message when attempting to scan:
     “Scanner reported an error
    HP Laserjet M1536dnf MFP is currently unavailable.
    Please check if it is turned on and connected, or try
    again later.”
    Yes, it is connected and yes it is turned on. The version of HP Scan that was installed is 4.4.1
    What can I do to get the scanning to function?
    This question was solved.
    View Solution.

    Hi Rpanz,
    Welcome to the HP Forums.
    I see that you are having an issue with scanning.
    I suggest that you uninstall the software and drivers and then click on the following link for the HP LaserJet Pro M1536 Multifunction Printer series Full Software Solution - OS X 10.9 Mavericks.
    Please feel free to write back if you have any other questions or concerns.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

Maybe you are looking for

  • Clearing query

    Hello, We are clearing GL account.There are lot of documents with document type KR,AB,DZ & SA.On clearing, we assign all documents , but on simulation it only selects document type AB .Unable to understand why the other document type are not picked u

  • Quote total must be a positive amount

    Hi, when i am duplicating the Quote it is giving the following error. "Quote total must be a positive amount". But when i execute ASO_QUOTE_HEADERS_PVT.update_quote_total(..) procedure I am getting positive value. If it is negative value only the err

  • Regarding rejection of material from vendor

    Hi All My scenario is like this My semi finished material is come from vendor after that i put that material on production after doing all process production done the GR for that material as finished goods. This material goes into quality and here I

  • RFC Destination for RFC adapters?

    What RFC destination is used by RFC receiver adapter?

  • Built iWeb site for friend with my account. How can I transfer site to his?

    Hi everybody. I recently finished creating an iWeb site for a friend while using my MobileMe account. What's the best way to transfer this site to his MobileMe account (so his username, etc. shows up in the url; not mine). I'd like to avoid having to