Need patchset/patch cluster for solaris 10 5/09 update 7 to update8

Please let me know where i can download the patch cluster or patchset to upgrade solaris 10 5/09 from update 7 to update8
Solaris 10 5/09 s10s_u7wos_08 SPARC to Solaris 10 5/09 s10s_u8wos_08 SPARC
Its a 64 bit SPARC
Thanks in advance.
With Regards
Suresh Rao Jc
Edited by: user13549783 on 14-Apr-2012 05:55

Moderator Advice:
Welcome to the OTN forums.
This is your very first post to the forums, so before you go any further, a piece of advice:
When you give your post a title of "Hi All" it does not tell anyone anything about what your inquiry might be.
The topic title that you place onto each one of your posts is just as important as what you place into your post. It tells everyone whether they need to spend any time with it. It tells everyone whether you are worth spending time with, whether you will be able to understand what they type in a reply, how technical they can be in a response.
These are technical forums. They are not chat rooms for casual feel-good gatherings. They are not `blogs`. The site is also NOT a way to make contact to Oracle's technical support staff. The OTN community is from the entire globe and is from end-users that happen to have an interest in the topics you read here.
Spend some time reading the forum FAQ,
https://wikis.oracle.com/display/Forums/Forums+FAQ
which is linked at the top corner of every page.
Also, spend some time with the forums Terms Of Use
http://www.oracle.com/us/legal/terms/index.html
which is linked at the bottom of every page.
In particular, spend some time reviewing section #6 in that T.O.U.
When you make your posts more informative and easier to read then responses will be more helpful.
... now go back and edit your post. Change the title to something that better describes your actual question.

Similar Messages

Solaris 10 SPARC Recommended Patch Cluster for 2008 quarter 3 version

Dear All,
Could any one please guide me, where I can download "Solaris 10 SPARC Recommended Patch Cluster" for 2008 quarter 3 version.
I have checked in sunsolve.sun.com, I'm able to find only the latest release.
please guide me.
Thanks and regards,
veera

Ok,
Here's a cute little formula to try using your systems parameters to gain some "head's-up" on an expected or estimated time to complete the patch run.
You will need a few things to prepare.
Number of "real" CPU's (not hyperthreads)
Speed of each CPU as a whole number i.e 2.87Ghz = 2,867
the total number of patches from the cluster i.e. Sept 15th = 381 (Solaris 10)
Network factor if using NFS = 2.5
local cluster file factor = 1.5
Patch cluster on CDROM factor = 3.25
Now, combine all of those elements in this equation:
{ ( #1 * #2 ) / #3 * factor(#4 or #5 or #6) }
This will yield a number in minutes of patch run time. Then all you will need to add is the standard boot up time to get the total of all patching and reboot.
Of course you could write a script to extract all of this information and feed it to "bc -l" to get a quick figure.
Example, on one of my Solaris 10 boxes with the information filled in to the equation:
#> echo "((4*2660)/381)*1.5"|bc -l
#> 41.88976377952755905511
It actually took 44.2 minutes to complete the patching of this box plus another 12 minutes to reboot. But all in all a pretty fair estimate I think.

Need latest acrobat reader for solaris 10 sparc version

i need latest acrobat reader for solaris 10 sparc version
checked adobe site it is only avilable for linux and not for solaris, very strange

There's no version of Adobe Reader XI for Solaris.
The only versions you can download are legacy - see the complete list here: http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Unix

Latest (November) EIS-Patching ISO for Solaris SPARC & X86 systems download.

Hi All,
I hope someone can assist as this has given me a headache for the last few days.
I require the latest (November) EIS-Patching ISO for Solaris SPARC & X86 systems.
I require the ISO and not just the Patch set.
Please advise.
Kind regards,
Paul

The current ISO (october) is available at the usual place : EIS for Partner
And for information, the next planned EIS will be available very soon but not this month.

Get the patch 5 for Solaris

can you tell me where can download 6i patch 5 for Sun Solaris? thanks
null

1) Go to http://Metalink.oracle.com
2) Then click on the link at the top with text:
==> Click here for Patches released after February 19, 2001 and for all Application Patches. "
3) Then Choose
Product family = oracle developer
Platform = Solaris or anything you wish
Limit Search to = Latest Product Patchsets or Minipacks
You should be able to see the patchset you are asking for. If you are looking for a one-off patch then select the default "all product patches" for the option "Limit search to".
null

Need IMAP and POP for solaris 8

Hello,
I need to install impa and pop agent for solaris 2.8 machine and can anyone please help out where I can file them or buy them ?
Thanks
-K.Kim-
[email protected]

There is a freeware IMAP daemon available on the
Solaris 8 companion software CD.
http://www.sun.com/software/solaris/freeware/index.html
-- richard

Patch Manager for Solaris 9 9/05

I am trying to locate the Patch Manager download for Solaris 9 9/05 but all I have been able to locate on the downloads site is the version for Solaris 8. Does anyone have a link to the Solaris 9 version? Thanks.

Exactly, whith that configuration all works well (if my server is connected to Internet).
The problem is when I have another server, not connected to Internet, that requires new patches.
If I have good understood I can install patch manager(2.0) on that server, require patches to my local patch server and if the patches required aren't on the disk the local patch server requires them to Sun. During this request it seems that my local patch server doesn't connect trough the proxy (snoop doesn't report connections). even if the configuration is set. (I have tried a reboot too).

Need an download accelerator for Solaris 8 (Sparc)

Is there any download accelerator available for Solaris 8 for Sparc architecture.
Thanks,
Amit
[email protected]

The download is available, but it isn't easy to find.
The "Sun Download Center Changes" page also refers to you to the Sun Archive (My Oracle Support Doc 1302856.1). Follow that link and you see a list of products you can download, including Sun Studio 11 (unaccountably listed under Servers and Storage Systems). That link takes you here
https://updates.oracle.com/download/12685437.html
where you can download Sun Studio 11. The one download contains the releases for each platform.

Patch Requirements For Solaris 10 x86_64 (10/08)

Hello All;
We are about to begin testing the use of installing SAP Netweaver onto Solaris 10 x86 (10/08). I have seen SAP Note 908334 and it describes use of a prior older version of Solaris 10 x86 (01/06). Can anyone tell me if newer versions of the patches described in this SAP note are included or need to be added later?
Many Thanks
David L. Black

You can check using
showrev -p | grep <patchnumer>
if the patch is already installed. Most likely this is the case for the version you use so there's no need to update any patches.
However, it's always a good idea to keep the system up-to-date, especially if you plan to use ZFS as filesystem.
I use "pca" to update our systems (http://www.par.univie.ac.at/solaris/pca/) - much easier to handle than "Solaris Update connection" - and fewer problems.
Markus

Patch released for solaris yet?

Hi, anyone know if patch 118786-01 has been released yet? If not, does anyone know when it will be released? Its counterpart for Redhat is available for download (118788-01)

You can check using
showrev -p | grep <patchnumer>
if the patch is already installed. Most likely this is the case for the version you use so there's no need to update any patches.
However, it's always a good idea to keep the system up-to-date, especially if you plan to use ZFS as filesystem.
I use "pca" to update our systems (http://www.par.univie.ac.at/solaris/pca/) - much easier to handle than "Solaris Update connection" - and fewer problems.
Markus

Recent changes in patch entitlement for Solaris 10 sparc systems?

Have there been any, especially those which non-contract customers should know about?
I am running Sol 10 u3 sparc on a Sun Blade workstation. Today, I noticed that some patches already installed on my system are now considered private on SunSolve (e.g. 143510-01). Also, kernel patch 142900-04 is private! I've been using SUM to get kernel patches forever (I am at 142900-03). What happened? Hopefully this is just a glitch. I can't believe that kernel patches will be private from now on!
There is a certain Xsun security patch which I have deliberately not installed. For years, it has come up in SUM. Today, for the first time, it is gone.
I am also running Sol 10 u8 on an x86 system. No problem with patches there - all normal. I installed kernel patch 142901-04 on it today. Also without a support contract.
What is going on?

Gary,
That is a great idea. I've been wondering about other ways Oracle could handle this issue, such as charging per patch, etc. This issue applies very much to Sun Studio 12.1 (see other recent thread about SS patches in this forum). There is NO WAY I, or the organization I work for, could justify spending $1,000+ per year just for SS patches. $300+/year for OS patches may be doable, but still probably wouldn't be worth it, unless SEVERE security holes are discovered that must be patched immediately, which I have never found to be the case over the last 8 years.
Your idea sounds like an ideal solution, but I fear that it is highly unlikely that Oracle would consider it. That would make some manager look bad in having to change his/her "great plan." Oracle should find some way to differentiate big "enterprise" Solaris users from 1-2 box shops who can't afford these pricey support contracts, but still depend on Solaris. For the last 7 years, public patches and these forums have done the job for me, and I have NEVER had to initiate a service or support call or request. That is testament to the stability of Solaris and the brilliance of its engineers.

Sun cluster for solaris (intel platform)

I wonder whether sun cluster will support oracle rac under intel platform?

I believe this is the plan. However, there is a bunch of work yet to do before
this can be qualified and supported. Stay tuned.
-- richard

I need to download 8i for solaris x86

Who can help me?

Oracle8i Downloads are available here:
http://www.oracle.com/technology/software/products/oracle8i/index.html
Regards, OTN

Patch number for Oracle 8.1.7.4 on Solaries SPARC 64bit

Guys,
Oracle Version: 8.1.6.0
OS: Solaris SPARC 64-bit
I would like to patch to 8.1.7.4. I need a patch number for this, I find it very difficult to search for the patch on Metalink. Would you please suggest the patch number and maybe also suggest the easier way to search for patches on Metalink.
Thanks in advance
Durbanite

Go to Metalink
Click on "Patches & Updates" tab
Click on "Simple Search"
Search by "Product and Family" and enter RDBMS Server
Choose the target release you are looking for (8.1.7.4)
Patch type => "Patchset/Minipack"
Classification => "Any"
Choose the "Platform or Language" your plateform (Sun Solaris SPARC 64bits)
And finally click on Go button.
You'll get only one row as result, the patchset you are looking for actually.
Nicolas.

Management console problem after installing recommended patch cluster

Hello everyone.
I just got a new SUN 440 server, it didn't come with the solaris os installed and so I installed solaris 9 12/03 to it. The installation went fine and I could start the management console with no problems at all. Then I went to sunsolve.sun.com to download the latest recommended patch clusters for solaris 9 (this was yesterday Sept.-06-2006), I downloaded the file, checked it with md5sum, unzipped it, went to single user mode and ran the install_patch script. After the patch cluster finished installing I rebooted the server for the patches to take effect, I logged in, tried to run console management 2.1 and it starts OK but I cannot use any services it offers because it says (in the console events):
"Server Not Running: no solaris management console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running"
When I click on "See Exception" I get (for a particular service that is... in this case com.sun.admin.fsmgr.client.VFsMgr - for managing file systems):
java.rmi.RemoteException: Server RMI is null:
at sun.com.management.viperimpl.client.ViperClient.lookupServer(ViperClient.java:376)and so on...
I already checked that the service is running on port 898 and it seems that there is no other app. using that same port. I also restarted the service using /etc/init.d.init stop/status/start but I get the same results.
I don't know solaris very much and don't know what else to do, please help.
Thanks in advance.

Well, I guess what you see isn't what you get.
Guess I'm used to the fact USENET just left things formatted the way they were :-O

Need patchset/patch cluster for solaris 10 5/09 update 7 to update8

Similar Messages

Maybe you are looking for