Need PCI to PC adapter for old 6400

I have a wireless network setup around an old graphite airport. There are 2 PCs, a Sun and a FW800. I want to include my old PowerPC Mac in the network. I have a compatible PC wireless card (Cisco). But, I can't find a compatible PCI buss to PC card adapter. The old Mac is running 9.2.2 OS. Siig makes one that is 10.X compatible but not 9. Can someone point me to an adapter new, used, Ebay anything.
Bob

I haven't seen any comments with regard to "reliability problems" with the Linksys WET11 or WET54G. These two products are very popular, so there are likely far more owners of those adapters rather than Belkin's - hence you see more feedback (usually negative, since few people complain when stuff works) about them.

Similar Messages

  • Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB?  They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system I recently purchased.

    Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB?  They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system with universal dock for Ipod/Iphone I recently purchased.
    You can also send my answer to [email protected]
    Thanks in advance for all who will help.
    slovebk

    refer to this Apple support Article, on Universal Dock which retail at $59 at Apple store.
    http://support.apple.com/kb/HT1380
    Look through the compatible list chart and see which 80GB model are you using, either ID 9 or 10. you can order through Apple Online Store.
    Have a nice day!

  • Need there party power adapter for apple 23in cinema display

    need therd party power adapter for apple 23in cinema display

    All you need is an AC prong adapter and, if you can't find what you need on the web, you'll be able to find one in Russia for a small handful of rubles.

  • Need a reliable power adapter for travel

    I am traveling to Russia in a few weeks and I need a good power adapter for my Mac Book Pro, iphone, and other small devices such as a shaver. I don't want to spend $40-50 on the Apple travel kit. Does anyone know of a good adapter kit or can lead me to a site. This is my first time in Europe and Russia and I will be there for 2 weeks and I plan to use my laptop, camcorder, and camera a ton.

    All you need is an AC prong adapter and, if you can't find what you need on the web, you'll be able to find one in Russia for a small handful of rubles.

  • I need a floppy disk drive for old 3 1/2" disks. I have a PowerBook G4 Mac with MacOS X 10.4 operating system. What will work for me?

    I need a floppy disk drive for old 3 1/2" disks. I have a PowerBook G4 with Mac OS X 10.4 operating system. What external drive will for for me?

    Hi,
    Providing that the old 3.5" floppies are 1.44 MB HD disks, you should be able to use a USB floppy drive.
    However, if the disks are 2DD/DSDD in the 800K Mac format a USB drive is not going to work. In this case you would need a suitable semi-old Macintosh computer with a built-in floppy drive as an intermediary.
    Jan

  • USB adapter for old imac

    I know this should be in the crt imac forum, but i need a response soon.
    I'm looking for a wireless usb adapter for a crt imac. This mac has the capability to use an airport card, but none is installed.
    Are there any usb adapters that are mac compatible? If not, is there anywhere i can find an old airport card (not airport extreme).

    Hi John,
    You want one of these:
    http://www.linksys.com/servlet/Satellite?childpagename=US%2FLayout&packedargs=c% 3DLProductC2%26cid%3D1118334782530&pagename=Linksys%2FCommon%2FVisitorWrapper
    It connects to the ethernet port. I have the 'B' version on an old 450DV+, and it works well.
    Steve

  • Do I need to buy wireless adapter for Equium A100-027?

    Hi, don't want to seem a complete idiot but, can anyone tell me if I need to buy a wireless adapter for my Equium A100-027? Not very good with technicalities I'm afraid and don't want to buy anything I don't need!!! Thanks

    Hi mate, no you dont, its built in, its on the side were the cd drive is, near the two usb ports...
    Message was edited by: GhostUK

  • I have a Vin, iMac 20 inch early 2008 . Can anyone tell me the now equivalent of this model? We had a housefire and I need to replace it new for old. I have a serial no. but cant find out which one would be the same model to replace it now.

    I am trying to find out how to find the specs because the machine is my daughters and it is no longer useable but if I know where I can find its details from the serial no I can get it replaced new for old on the house insurance. Where can I find these details?

    I lost equipment due to lightening strike several years ago, which also had old equipment and was not available. I gave insurance images and provided original receipts (my purchases were made on Apple.com), and Apple provided electronic copies of the receipts. You may want to contact Apple and check, if they can provide a copy. Insurance may depreciate the original value. I was offered residual value which i used to buy newer replacements, and provided the receipts for replacements back to insurance.

  • New power adapter for old macbook - It doesn't work!

    Hello!
    My MacBook is 3 years old. My power adapter got broken at the end where you put it into the socket.
    Now I bought a new power adapter. The adapters have changed now. The end where you put it into the computer looks now a little bit different. But they told me in the Apple Store that it will also fit my 3 years old Macbook.
    At home it really fit my Macbook but it didn't charge. Nothing happened, no light. How can that be? Then I combined the two, the end for the socket of the new power adapter and the other part where you put it into the computer of my old power adapter. Now it charges. So is the problem after all the part where you put it into the computer of the new power adapter that looks different now?
    Or what can I try now?
    Thank you for help!
    Sorry for my bad English.
    xenchen
    Message was edited by: xenchen

    You may need to download and install the SMC firmware update:
    http://support.apple.com/kb/DL1312?viewlocale=en_US

  • Speaker adapter for old imac (bubble) speakers?

    I was hoping to use the old 'glass ball' looking speakers from my previous imac on my mac book pro laptop but the jack is not the same
    Does Apple make an adapter that will allow me to use them?
    Many thanks!
    Bob

    Hello Bob,
    You will need to find and purchase something called an ' iFire '. Just where you will find one these days, I do not know. There will be some around for sure.
    Regards.
    Ian.

  • Need PCIE FW800 Expansion Cards For G5 Dual Core 2.0

    Hi Gang
    Seems like one is always behind the eight ball trying to get ahead.
    With the only available PCIe FW800 Multi Port Cards, they've taken away anything that offers more than 2 Ports. Everything is 2 PORT ONLY. There's nothing that I can find. And the prices for PCIe Multi Port FW800 Cards are a whooping triple of standard PCI Cards.
    The old issue;
    Do Not put a 3rd PCIe card directly above the video card - DO NOT. I've already had overheating which spilled above in regard to my older Single 1.8 Can I trust the better cooling of the Dual Core to put a PCIE card directly above the Video Card?
    If not, that leaves me with 2 PCIe Multi-Port Cards with 4 ports available total. But I need to read #5 External Storage drives total.
    Unibrain repeater was recommended here, but can I read all 5 drives simultaneouly? SATA Card alternative? No Can Do - because #2 of these older external drives DO NOT have SATA control.
    http://www.synchrotech.com/product-1394/firewire-hubs-repeaters07ub-firerepeater-800-pro.html
    OWC is NO HELP here;
    http://eshop.macsales.com/search/PCIE
    Any other ideas?
    Thanx
    Mike

    Hi direwolf
    Hi japamac
    Daisy Chaining (as stated by Steve), is not recommended. In fact, it's dangerous if you're depending on reliability for expensive, extensive Video Media. I would never ever do it again
    I actually did buy two of these from OWC;
    http://eshop.macsales.com/item/Apiotek/IE1007/
    BUT
    Got problems; The cards went in like a breeze, but they're NOT reading any of the external Lacie Drives. The Native 800FW port in the G5 reads just fine, but the PCIe cards are not reading the Lacie's. Yes they are recogized in the system profiler. But I've got a mystery on my hands right now.
    Mike

  • Need power converter/plug adapter for trip to Russia

    A family member will be in Moscow, Russia for a few weeks, later this month. I've already talked to AT&T about the cost of using the phone, SMS and the data network (it ain't cheap!). However, our REAL concern is how to charge the iPhone 3G while in Moscow.
    Can someone recommend some converter/adapter devices that will suffice for the trip? I know nothing about how Russia's electric power differs from the US.
    Thanks

    Apple's Ultracompact USB Adapter works with 100-240v, 50-60 Hz. Moscow electricity is 220V 50Hz. All you would need is a European plug adapter with two circular metal pins. Here's one: http://www.calcellular.com/uni-ad-2la.html

  • New user needs to reset password asking for old users password

    Attn: My new Mac friends,
    I just bought me a mac pro with the operating system
    X Already Installed and because its a used macintosh the old administrators logon name appears and of coarse its asking for the password.
    I need to know how to reset the password and put my password in it without the use of the disc to the OS x.
    Or maybe clear the password at startup by entering ?
    (what Key on the Keyboard do I press to enter the computers system bios or adminastrator?
    thanks susan ([email protected])

    Welcome to Apple discussions, Susan!
    On a Mac you have to have the system disk in order to reset the administrator password. You should ask whoever you bought the system from to give you the disks. Without these you will be unable to fix many of the problems that occasionally arise. At the VERY least, you should be able to get the password from the person you bought it from.
    Just for future reference Macs don't have anything equivalent to the BIOS. That is a PC thing.
    Also this forum is for people who want to program on the Mac a much better forum would be the "Installation & Setup" forum under "Tiger"
    http://discussions.apple.com/forum.jspa?forumID=752
    Finally, it isn't a good idea to post your e-mail address in public forums like this. Spammers can, and do, read through and add your address to their lists. Additionally the expectation is that all answers will be made to the list, so that others can get the help as well. If you want people t be able to reach you directly, you can go to "My Settings" on the right and add your address there. It is much harder for spammers to get your address that way. If you wan to know that someone has responded to your post, you can "subscribe" using the "My subscriptions" link, also on the right.
    Enjoy your Mac!

  • Camera adapter for old ipod photo 60GB - does it work with ipad 2?

    Ive bought my wife an ipad 2 for Xmas.
    whilst looking at the accessories could've got carried away. Definately like the camera adapter kit, but realised the USB adapter looks identical to an adaptor ive already got for the old ipod Photo 60Gb (a few years old now obviously).
    i cant test it on the ipad as its all boxed and wrapped, so to save another wad if someone could enlighten would be grateful !

    thats pretty conclusive then, thanks for the steer.

  • Need info regarding planning adapter for HAL

    Hi all
    We are using 9.3.1 on windows machine, I am wondering for HspJsHome.properties file where I can check the port number for RMI .
    i just want to double check the port no for RMI is registered in planning or not.
    I am unable to connect planning adapter with planning server, to my surprise i am unable to see HspJSHome.prper file in
    Hyperion\HyperionPlanning\AppServer\InstalledApps\Tomcat\5.0.28\ HyperionPlanning\webapps\HyperionPlanning\WEB-INF\classes
    we are using tomcat I am unable to see the folders from Hyperionplanning\webapps I didn't find them , after 5.0.28 i have only two bat files of start and stop planning bat files, and also I do have only one folder with name InstallableApps not InstalledApps ...in the above given path.
    Did I make any mistake in installation.
    I already created the planning applicattion and initialized the wrkforce and capex too...
    regards
    Mar

    Hi,
    Version 9.3.x does not use the HspJSHome.properties file, all this information is now stored in the relational database for the planning system.
    Cheers
    John

Maybe you are looking for